Magnetic flange for sawdust collection DIY

Рет қаралды 27,358

2 жыл бұрын

Welcome to my new workshop. In this video you can see the production of magnetic ports for sawdust extraction adapters. You can also see how you can easily cut a circle and a circular hole without using CNC.

Пікірлер: 31

@travelwell8098 Ай бұрын

I like the way your brain works! Thanks for sharing your ideas!

@tinycuisine6544 Жыл бұрын

Great skill and patience! You take some extra steps that on the surface seem unnecessary, but make the end product look good and professional. That's a sign of a great craftsman.

@kenord3437 4 ай бұрын

I love the magnetic coupling idea, well done and thank you.

@orionmec 2 ай бұрын

Damn dude, I have done what you show in the opening scene too many times!!!! Also, I really liked the music to listen to. I wonder why.... hahaha 🎶🎸

@Mikey__R Жыл бұрын

Awesome!

@MauriceCalis Ай бұрын

Loved this video. Told the story well without words, beautiful design and execution….perfect music choice too. I’m just wondering what magnets you used, because I just did the same exact design, but the ⅝” neodymium magnets I ordered were not strong enough to hold the weight of the 2” hose (horizontally). Also, did those magnets stay in with just a pressure fit and no glue?

@sayedhassan846 Жыл бұрын

Awesome! did you use teflon tape to seal the pvc edges or what kind of tape was it?

@gatordontplay8161 Жыл бұрын

How’s it holding up?

@larsonbennett5903 Жыл бұрын

Are the magnets slightly beneath the surface of the wood, slightly proud of the wood, or exactly even with the surface of the wood?

@joe_ocenas Жыл бұрын

surface of the wood

@gXXrGoNe Жыл бұрын

Curious what type of piping did you use as well as what size, looks like 4 in. but looking to confirm?

@joe_ocenas Жыл бұрын

yes 4 in

@rogerdirkx.1679 3 ай бұрын

What strength magnets did you use? Thanks

@joe_ocenas 3 ай бұрын

I used neodymium ones with a tear-off force of 10 kg,

@morsetoujours1396 2 жыл бұрын

Great video, but please, mind your fingers

@joe_ocenas 2 жыл бұрын

Thank you, of course safety is paramount. :)

@kevinhamm2819 Жыл бұрын

All of that just to hold one table saw blade?

@brianniegocki2086 Жыл бұрын

Not the only custom designed finger remover on youtube, but may be a unique one. Genuinely sorry if there are hurt feelings, but please don't ever use a table saw this way. A spinning wheel that's designed very well to draw fingers directly into the blade. Very little margin for error

@fabianmuhlberger6153 5 ай бұрын

I thought the same. While it is ok to turn material into the blade (from a technical standpoint), the risk of getting your fingers drawn in is incredibly high. The only practical way to do this is, to turn the wood on the right side with an additional solid rest for the turning hand, so that it can't be pulled towards the blade.

@GodsMan500 7 күн бұрын

This guy takes insane risks on that table saw. If we are instructing on tool usage, we should always demonstrate impeccable safety practices because the noobs don't know what they don't know. All you need is one off-day, one distraction and your life will change forever. It's not a question of "if". It's a question of "when". You can get away with it for years and even decades, but that one off-day will come.

@joe_ocenas 7 күн бұрын

I have been working with wood for 14 years and so far I still have all my fingers. Some shots are sped up, so it looks a bit reckless, but the basic safety rule is mainly knowing what I'm doing and focusing on it.

@GodsMan500 7 күн бұрын

@@joe_ocenas I hear you, Joe, but what I found after 30 years of woodworking is that focus is a variable, since we are all human. I went 30 years without incident until one day I touched the blade at exactly the same time that it almost stopped rotating. I was shocked at my lapse in judgment. I’m always impeccable in safety measures yet that one day I came within 1 second of a serious injury , just because my mind was uncharacteristically distracted. I guess the point I want to make is that it’s always best to operate with the widest margin of error possible, just to gain that 1 second when it’s needed. It took me 30 years of a perfect record until I touched that blade. Just like with motorcycles, aviation, and other inherently dangerous activities, confidence can kill or maim. It’s the confidence itself that brings one to smaller and smaller margins of safety. You’re obviously a master at your craft ( I say that sincerely), but as the official Internet Safety Police, I think it’s not a bad idea for me remind the newer guys how hungry the table saw is and how instantaneously bad things can happen. Leave a wide, wide margin of error for that one bad day, guys.

@Rich32262 4 ай бұрын

I bought some from Amazon. They were $50. and were for the 2 1/2" hose for my router. If there was even a slight bend in the hose, it came disconnected. While I was attaching it to the hose, I dropped it and a piece broke off. Appears to be from a 3D printer. They were yellow if you see them there. Brand says Generic. I sent it back, useless. If they said they'd refund me and I could keep it, I wouldn't use it.

@joe_ocenas 4 ай бұрын

stronger magnets are needed, I used neodymium ones with a tear-off force of 10 kg, a total of 30 kg...

@Rich32262 4 ай бұрын

I think they are neodymium. I just think it needs a couple more.

@garylarsen4038 4 ай бұрын

Really love your video and have subscribed to your channel! I don’t agree with all the concerns raised about watching your fingers etc. you captured the work piece and worked gradually to perfect your piece. Can you share more about the source of the magnets used and also the sealing tape? With your permission I would love to make some of these for my shop! Thanks for the video it is very informative!

@joe_ocenas 4 ай бұрын

@@garylarsen4038 thank you, for sealing I used PVC tape for air ducts and the magnets are neodymium, diameter 15 mm x 6 mm,,, for 5 flanges the price is max 5 euros/usd if you have scraps from plywood