What's the tool that used to take those lug nuts off called. I have used one but for the life of me can't remember what it's called?

It’s a good job you ain’t Santa mate you’d struggle to put your way nav on lol hope your ok brother

Yea buddy Chris what happened to the struggling paint job ?

@@Hazzardmatt1 torque multipler

@@lyndonwebber1389 ssshhh that’s a no go zone 🫣😂

That’s a proper good age there mat, bet she had some stories bless her 😊

He was a down to earth character mate 👌

What happens if I bung it then mate? Thanks to for the advice it’s much appreciated 👍

@@Professional-struggler should be ok to cap off once the air is all out. If there is air in there it will explode go on fire when the oil gets hot. Might only be a little bang but best to get all the air out and cap it off then

@@user-xi3zp4lm3m cheers mate, will do 👍 thanks again

Get in touch any time ur at plant equipment mate i have a lot if info for u if u need it

Thanks Colin appreciate the support mate 🤙🤠 have a good week mate

Thanks David will try mate 👍

The compressor itself is to small if you ask me...but if it does the job and have only once in a while this kind of situations than it is fine :)

Will do mate 👍 you to

Thanks Richard 👍

Thanks mate 👍

Cheers Jerry 👍

😂😂that’s the trouble mate a 10min job can turn to 2 hours! Have a good week John

Thanks mark 👍

😂😂 cheers Matt 👍

Thank you Gerry hope your well mate and have a good week 👍

or would that not have been too much of a struggle!

Thank you Matthew! Yeah as you said there’s a lot to it all mate, appreciate the comment pal 👍🤠

Your very welcome mate keep up the great content that you put on for us you do a amazing job 😃

That’s alright mate life busy mark, yeah just going to do that job now mate.. I’ve been missing my jack! 😂😂 very true mate! Take it easy and have a good weekend

Agree with you there mate! Cheers Jon take it easy mate 👍

Cheers Sebastian 👍

😂😂 cheers Pete! Can’t beat the old hammer mate

😂😂 my 2 main shops there mate

Cheers phil… always mate 😂👍

Cheers Gordon 👌interesting stuff mate that I’m not familiar with 👍

Aup mate! yeah Sunday was good cheers, hope you have a good week mate 👍

Will blocking the hole not work then mate? It don’t work up or down

@@Professional-struggler I don’t think it will mate tbh, you will see when you take those valves out from the front you can see the drillings in the ports and should be able to see how it leaks off. As far as I know the holes at the back let you know that the valves are bypassing internally. If you have a look at the other rams mate they should all be the same with holes in the back.

I’m going to this job now mate so I’ll have a look! Thanks for all the advice mate it’s much appreciated 👍👍

@@Professional-struggler best of luck mate, I’ve not got any drawings anymore otherwise I would of sent you a copy

😂😂 them new filters mate

I didn’t even think of that mate 👍👌 cheers Ian mate

I used to run a couple of Liebherr LTM’s 50 & 90 ton Cranes in Sierra Leone after the war, they arnt the easiest things to work on, but they are good lifter’s, the engines are tight to work on between the chassis beams..love your channel, make me laugh.. 👍🏻👍🏻👍🏻

😂😂 never a truer word said

👌👍

😂😂 true mate

If you sign up to a sponsor you sign a contract, one of the many clauses is you will not say anything derogatory about their items, if you do your in breach of contract and can be sued for damages. Never listen to anyone on KZfaq pushing anything that they are sponsored by as they are biased towards the company not their viewers.

👌👍

Oh mate I’ll look tomorrow, I’ve got 3 in all

@@Professional-struggler thankyou. Im looking at purchasing a new one from screwfix/ toolstation and looking for decent torque and reliability combined. Your makita seems to hold up well in your videos

He tried that in the last video but even the driver didn't know how to get them down 😂😂

Yeah it’s just so small mate! 👍🤠

🤦🏼‍♂️😂😂

I especially liked when u said this is a bit dodgy, then u climb under and start sledging the wheel off lol

😂😂 if I make it to that age mate

Didn’t even think of that mate 👍

😂I’m snared up with old wood mate

Not much works mate 🤦🏼‍♂️

👌👍

Aup Andy! Yeah good thanks mate! They have mate👍 have a good week mate

Oh dear what if I bung it then?

The two valves on the front of that block unscrew and have a load of seals in. Replace those and that will sort it mate

@@lukehills4677 thanks mate, appreciate it Luke 👍

They tryed that last time but couldn't work out how to get the legs to work lol

Yeah as victor said mate 👍

Will it matter if I ding it even if the suspension don’t work? Cheers Alan

@@Professional-struggler the system that runs the suspension and levelling are live hydraulics. Basically the nitrogen takes any hard knocks that the suspension gets to take the strain off the rest of the chassis. When that hole is plugged two things will happen, air will become trapped in the system which can and will affect the operation of the valves, secondly the stress now bypassing the nitrogen cushion will placed directly on the hydraulic hoses. For that fitting to be broken off like that something had to of moved, sway bar end worn out or some alignment issue. If you not going to road it and just move about the job site with it you should be ok, just make sure the owner understands the implications as here in California a new strut starts at $12000 if you can get one. Keep up the struggle, buddy. All the best

Thanks mate that would be a lot of help I’ll look into it 👍