Creality Ender 3 - V1 Versus V2

Creality Ender 3 - V1 Versus V2 - Chris's Basement

Рет қаралды 174,576

Күн бұрын

We check out the ender 3 V2 and see if it is worth the extra money over the original Ender 3.
00:00 Intro
01:08 First Look Comparison
07:56 Sound Comparison
09:06 Print Comparison
12:20 Conclusion
Ender 3 V1 from Creality (aff);
www.creality3dofficial.com/pr...
Ender 3 V2 from Creality (aff);
www.creality3dofficial.com/pr...

SUPPORT THE CHANNEL BY CLICKING THESE LINKS!
OpenBuilds - Great CNC and 3D Printer Parts (aff)
openbuildspartstore.com/?ref=...
Slice Engineering - Mosquito Hotends (aff)
www.sliceengineering.com/?p=r...
Wham Bam Systems Flexible Beds (aff)
bit.ly/2HoS1cV
Amazon (aff) [US DE GB CA IT ES FR JP]:
www.amazon.com/?tag=chrisbase...
Banggood(aff) ban.ggood.vip/7vm3
Aliexpress(aff) s.click.aliexpress.com/e/UrRbCm8
Buy me a coffee to keep me going!
buymeacoff.ee/Wc0DouFbl
You can support my work on Patreon
/ brotherchris
One Time Tips, You Can PayPal Me:
www.paypal.me/ChrisRiley3D
----------------------------------------------
Find Me Over On Twitter!
----------------------------------------------
Twitter : / chrisriley3d
FTC Disclaimer: A percentage of sales is made through Affiliate links
As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 371

@rorykane4719 3 жыл бұрын

The fact he has responded to every single comment, shows you his dedication to his work and channel. Awesome video!!

@ChrisRiley 3 жыл бұрын

Thank you!

@getignited114 3 жыл бұрын

Seriously... subbed for sure

@Efferheim 2 жыл бұрын

@@getignited114 yup. Seeing this and being 22 seconds into his first video... subbed.

@JohnOCFII 3 жыл бұрын

Nice comparison, Chris. I love the detailed way you run down items that aren’t just big “checkbox” items from the vendor.

@ChrisRiley 3 жыл бұрын

Thank you!

@yuhdo 3 жыл бұрын

this is exactly what i was looking for, i like that you went over even the smaller differences that might be better for some preferences

@ChrisRiley 3 жыл бұрын

I'm glad it was helpful. Thanks

@fooshi6514 3 жыл бұрын

Honestly, I was really on the fence about buying a v2, but WHAT 5 BENCHYS HOW COULD I PASS THIS UP IM BUYING 6

@ChrisRiley 3 жыл бұрын

Ha! Sounds good!

@tracz99 3 жыл бұрын

No one should have the power to hold 30 Benchys! Someone stop this madman!

@stc_ 3 жыл бұрын

I have also found that the rubber feet have saved the cords from getting smashed on multiple occasions I got the v2 as my first printer

@ChrisRiley 3 жыл бұрын

For sure! Thanks for watching

@Gabice93 3 жыл бұрын

Great detailed but concise review! Thanks

@ChrisRiley 3 жыл бұрын

Glad you enjoyed it!

@ZaidAnsari80354 Жыл бұрын

Wow I needed this exact video! Props man

@ChrisRiley Жыл бұрын

Glad you liked it!

@JBM_95 3 жыл бұрын

Thanks for your video Chris ! 7:56 exactly what I was looking for ! Noise comparison :)

@ChrisRiley 3 жыл бұрын

Glad I could help!

@kailin1496 3 жыл бұрын

Hi! Great video I was wondering what filament you used in the beginning of the video the shiny blue one, thanks!

@ChrisRiley 3 жыл бұрын

Thanks it's Prusament Royal Blue.

@abesebag1085 2 жыл бұрын

very good video, exactly what i was looking for!

@ChrisRiley 2 жыл бұрын

Glad it helped!

@siddharthkaza5021 3 жыл бұрын

u forget to mention the v2 has thermal runaway protection. STOCK. safety is key, and the v2 wins out in every sense there.

@ChrisRiley 3 жыл бұрын

Nice!

@ChrisRiley 3 жыл бұрын

@quique182 I think that is how they all come now, so that is awesome.

@thewallabyedits6403 3 жыл бұрын

@@ChrisRiley got my ender 3 a couple days ago and it has a 4.2.2 board

@ChrisRiley 3 жыл бұрын

@@thewallabyedits6403 Nice!

@johndavolta3124 3 жыл бұрын

@@thewallabyedits6403 how do I check if mine is 4.2.2?

@MortuusYT 3 жыл бұрын

I'm looking to get into 3d printing and was debating. Very informative and entertaining vid, thanks!

@ChrisRiley 3 жыл бұрын

Glad it was helpful!

@jimmysgameclips 3 жыл бұрын

Props to Ender putting this on their site, it's not a biased review. Makes me want one even more because of that

@ChrisRiley 3 жыл бұрын

Thank you!

@CyborgElf 3 жыл бұрын

I went for the V2, it is only ≈40 USD more now. Thanks for the detailed video.

@ChrisRiley 3 жыл бұрын

Good choice! Thanks for watching

@hollywafflez4722 3 жыл бұрын

Thanks man! I was already considering going with the v1, as I'm just getting a taste of 3d printing, so this was a great video! Thank you very much sir! 👍👌

@ChrisRiley 3 жыл бұрын

Glad I could help!

@VoeViking 3 жыл бұрын

This was a great vs review. Thank you.

@ChrisRiley 3 жыл бұрын

Glad you enjoyed it! Thanks for watching

@SlicePrintRoleplay 3 жыл бұрын

A fantastic comparison video, thank you!

@ChrisRiley 3 жыл бұрын

Glad you liked it!

@PMcDFPV 3 жыл бұрын

TELL ME TELL ME NOW !!!! Great way to start the morning, thanks sir !

@ChrisRiley 3 жыл бұрын

I'm glad you enjoyed it!

@Skott62 3 жыл бұрын

Great comparison Chris! A lot of people that are looking for a first printer will find this video very helpful.

@ChrisRiley 3 жыл бұрын

That's what I'm here for. Thanks for watching!

@AndrewAHayes 3 жыл бұрын

I would have foregone the cost of tooling and production of that wheel and upgraded that extruder to the alloy version with twin gears, of course, this will add a little to the top-end $ but considering it will need to be added eventually by the user I believe this adds value to the unit

@ChrisRiley 3 жыл бұрын

Totally agree.

@vincenzodeconcilio7610 3 жыл бұрын

Thanks for the great video - I'm still undecided about what to get as it would be my first printer

@ChrisRiley 3 жыл бұрын

Thanks for watching

@mrclown7469 3 жыл бұрын

Agree with you that the V1 is a better printer for people willing to tinker. For the $100 saved you can upgrade it to a 32bit board with 2209's, and still have enough money left over for a (clone) BMG extruder and 3D touch. V2 is probably a better option for (trying to put this nicely) non-technically minded entry level users who are interested in 3D printing because it's the cool thing at the moment. Or come to think of it, in simpler terms: Nerds = buy a V1 Geeks = buy a V2

@ChrisRiley 3 жыл бұрын

Lol... well said.

@DanielFilipiuk 8 ай бұрын

nuff said thx

@gasser5001 3 жыл бұрын

You're a literal god for making this video. Liked and sub'd.

@ChrisRiley 3 жыл бұрын

Thanks for the sub!

@ein57ein 3 жыл бұрын

Great video.. gives me a bit to think about, specially with the Biqu B1 out there now.

@ChrisRiley 3 жыл бұрын

Thank you

@MrBEnIbb Жыл бұрын

Great Video. Would be really interesting to send the exact same Gcode into the S1

@ChrisRiley Жыл бұрын

Great suggestion!

@ec-norsemanzero-drake7031 3 жыл бұрын

Saddamo sent me... great video! Now waiting for my printer. haha

@ChrisRiley 3 жыл бұрын

Thank you

@damiangale9074 2 жыл бұрын

Have to comment and say this was a very informative video. Thank you.

@ChrisRiley 2 жыл бұрын

Glad you enjoyed it!

@CMDRBlueeagle66 3 жыл бұрын

My first printer was an Anet A8, which I heavily modified and converted it to an AM8. A few weeks ago I purchased the Biqu B1. Gotta say I'm loving it. Don't think I can part with my AM8 though. So I now have two 😃

@ChrisRiley 3 жыл бұрын

It's hard to let them go. Pretty soon you'll have a whole house full of printers. 😉

@simonnaughton2272 3 жыл бұрын

Hey Chris. How about the v2 versus the BIQU BX that’s on Kickstarter at the moment. Thoughts?

@ChrisRiley 3 жыл бұрын

Great question, just from the short time I have had the BX, I think the Creality machines are a bit more polished.

@Imperial_Dynamics 3 жыл бұрын

Excellent video!!! Thanks

@ChrisRiley 3 жыл бұрын

Glad you liked it!

@michaelsemenchuk3056 Жыл бұрын

Hey Chris! I upgraded my Ender V1 board to a Creality 4.2.7 and flashed it with Marlin Bugfix 2.1.X. Everything seems to be working great with only the slight hiccup of the CF CARD reader not re reading the card if you ever pull the card out and reinserting it, or inserting another card. The only way to remedy this is to power cycle the printer. I use a mini CFto CF card reader and ejecting the mini CF portion on the ribbon cable seems to work also; The board seems to need that "click" on insert. Have you come across this? How did you fix it? Thanks!

@ChrisRiley Жыл бұрын

That's strange, there is no reset option for the reader I guess. I would think that would be a firmware option, but I'm not sure which one controls that.

@michaelsemenchuk3056 Жыл бұрын

@@ChrisRiley Thanks for the reply. The issue seems to have resolved itself. Gremlins.

@joelpiasentin7859 Жыл бұрын

What brand of filament did you use to print these? I bought a roll of inland black and I want to see if it will be any good

@ChrisRiley Жыл бұрын

Here you go: geni.us/oeYY This link will take you to our Affiliate page on Amazon

@cenoa7999 3 жыл бұрын

As of now which one would u guys recommend?? Completely new to 3D printing btw

@ChrisRiley 3 жыл бұрын

The V2 is a little more polished, it might be a bit easier for a new user.

@orion7353 Жыл бұрын

Do the ender 3, 3 v2, and 3 s1 all have the same frame setup? I've only been able to look at pictures, I'm thinking of buying a broken 3 v1 off if eBay for the frame and bed then get the rest from other places to save a bit of money and also to upgrade it for the future. Are the frames the same?

@ChrisRiley Жыл бұрын

There no all the same, some use different size extrusions. Example, the V1 has a 2040 Y, the v2 has a 4040 Y.

@Cryptomaniac.f 3 жыл бұрын

Thanks, useful video!

@ChrisRiley 3 жыл бұрын

Glad it was helpful!

@feepants4495 11 ай бұрын

I'm looking to buy the v1, but I'm concerned about some reviews I'm seeing which say the print bed is a bit warped and that it seems to break if used regularly and requires some modifications. Is this something to worry about? What modifications might be worth it? Is an upgrade to the v2 really worth it on a tight budget? Is there another budget model you recommend? I'm new to 3D printing (I've done some research and designed a few models but that's it) so I don't know a lot. Thanks in advance for the reply!!

@ChrisRiley 11 ай бұрын

Hey, the V1's do tend to have a warped bed. It's very hit and miss. Not sure the V2 is worth the extra money, but if you are having problems with the bed, you could add a piece of glass to help make it flat.

@Jesters3DTabletopGaming 3 жыл бұрын

Excellent comparison! I would definitely pick the V2. And I feel a metal extruder should come stock on all machines

@ChrisRiley 3 жыл бұрын

Thanks, I agree!

@joshuak4553 3 жыл бұрын

An Ender 3 v1 with an aluminum extruder, 32bit Bigtreetech board and an all-metal hotend should end up within a few dollars of a stock v2. So in my opinion, the v1 is definitely the better buy

@ChrisRiley 3 жыл бұрын

Fair enough.

@830jps 3 жыл бұрын

How is it, that the V2 failed in the MakersMuse print. Were both beds leveled the same before the test?

@ChrisRiley 3 жыл бұрын

They were really close, only thing I can think of is V1 is under extruding.

@davidolson7575 3 жыл бұрын

Thanks Chris for the comparison, I’m not sure I would go for the V2. For an extra hundred bucks I would’ve expected a little More like auto bed leveling as an example. I also was a little disappointed as you were that they hadn’t fixed the extruder plastic arm assembly. Again a great great video thanks so very much

@ChrisRiley 3 жыл бұрын

Thanks David, totally agree, I think they could have went a bit further.

@jamesk1619 3 жыл бұрын

has there been a follow up on the other competitor printers as mentioned?

@ChrisRiley 3 жыл бұрын

I haven't done one yet, still in the works.

@mitofun6967 3 жыл бұрын

So basically the big improvements in the board with drivers! Is it worth to improve the v1? Eg skr 1,4 + tmc 2209 (5) screen 3,5 v 3 + the second z motor with shaft + direct extrude + bltoch and the silicon heating pad 220 v :)

@ChrisRiley 3 жыл бұрын

Pretty much. :)

@3DHP 3 жыл бұрын

Great Video Chris.

@ChrisRiley 3 жыл бұрын

Thanks 👍

@timmypower1257 Жыл бұрын

hey i wonder im really stressed about that i was wanting to buy the ender 3 v1 but when i saw the prints i got more stressed about the stripes is that a problem or does all printer gett stripes like that

@ChrisRiley Жыл бұрын

With all FDW printers you will have a bit of that.

@ilyas5708 3 жыл бұрын

My 2018 E3 v1 doesn't have the waterline on the benchy. W/ cura slicer

@ChrisRiley 3 жыл бұрын

Nice! That's a good profile.

@scottwilliams6611 3 жыл бұрын

Probably a silly question but for the V2, where do you store the printing cartridge cable?

@ChrisRiley 3 жыл бұрын

Cartridge cable?

@shrimppretzel4671 3 жыл бұрын

is the hotend cover metal or plastic on the v2?

@ChrisRiley 3 жыл бұрын

It is plastic.

@dalekubichek5710 3 жыл бұрын

I wish KZfaq would add a posting date to vids. I'd like to know if I order today if there has been improvements against the web site info.... It looks like this post was ~6mo ago by comment posts?!?

@ChrisRiley 3 жыл бұрын

The posting date should be right under the title, at least from my laptop view. Creality Ender 3 - V1 Versus V2 - Chris's Basement 77,848 views•Aug 26, 2020

@PCBrew 3 жыл бұрын

Should have thrown a Ender 3 Pro in the mix and compared all three. Also you should mention some of the upgrades that you could do on the V1 like a skr mini E3 v2 board to get similar print quality.

@ChrisRiley 3 жыл бұрын

I don't have a pro, but good ideas.

@PCBrew 3 жыл бұрын

Really no difference to the pro and the v2 besides the 32 bit board and the screen.

@fernandoriveros3874 3 жыл бұрын

Nice comparison. Got my V1 September 15th (couldn't really see a great difference for the price), has the same 32 bit board as the V2 BUT with A4988 drivers, hence still noisy. Regarding thermal runaway protection, I enabled the feature when upgrading marlin to it's version 2.0.x (mandatory in my opinion if buying this version). When compiling the binary I found out I really had lots of memory to cope with, so that helped a lot to enable lots of non stock features. The 32 bit board comes with a bootloader flashed, so upgrading the firmware gets several steps easier. If you don't have the money, or if you are willing to tinker with the machine, I agree that V1 is still a great option, and the enhancement in the board gives a wider range to play with.

@ChrisRiley 3 жыл бұрын

Thanks! That is really cool they come with 32b boards now. That really opens up a lot of features for us all to tinker with.

@shaxperiment 3 жыл бұрын

Amazing video chris. Do you know if they do an Ender 5 v2?

@Fly_High_FPV 3 жыл бұрын

not happy with my 5, about to buy another 3...the build plate just saggy, even with reinforcement

@shaxperiment 3 жыл бұрын

Fly High FPV I don‘t have that problem. But i have the new version. Maybe they changed something. I don‘t use reinforcement

@ChrisRiley 3 жыл бұрын

Not sure if they have a 5 v2 yet, but I bet it's not far out. They already have the Pro.

@southsidemusicproductionho6311 3 жыл бұрын

Ok so tolerance is an issue on v2. What printer does a better job that you can recomend? Also im thinking about getting the ender extender kit for v2

@ChrisRiley 3 жыл бұрын

I am currently testing a couple of these, to early to make a call, but I am liking the SC-10 Shark.

@sunansilver6147 3 жыл бұрын

What is tolerance issue?

@SolaireAstora-bg6hf 2 ай бұрын

Yo, I was just wondering about the V2, what do you mean about the glass texture on the prints, is that permanent and does it need something to come off, I'm currently in the market for the V2 so I would really need this info, Thanks bro

@ChrisRiley Ай бұрын

Yes, it is permeate. It's not drastic, but the finish on the print is a mat textured look to it. I guess you could sand it off.

@Iloveguillermo 3 жыл бұрын

Thanks

@ChrisRiley 3 жыл бұрын

Thanks for watching!

@GaryJWright 3 жыл бұрын

the Ender 3 / Pro / V2 all now come with v4.2.2 32bit board with TMC2208 NOT 9's since August 14th as standard OEM fit - the v4.2.7 is the retail version (stand alone) with TMC2225 you can buy to upgrade older 8 bit boards

@ChrisRiley 3 жыл бұрын

Nice!

@user-hg2uw4gt2i 3 жыл бұрын

32bit board, better motor driver should be the change! great video thanks!

@ChrisRiley 3 жыл бұрын

Yes I agree. Thank you!

@ixl4710 Жыл бұрын

Should I get an ender 3 v2. Or an ender 3 max? I might need the extra size but I'm not sure. Should I get the max to be safe?

@ChrisRiley Жыл бұрын

The Max it probably a safe bet

@jamienightingale707 3 жыл бұрын

Just got my first printer last weekend, a V2. Having problems with Y axis shift

@ChrisRiley 3 жыл бұрын

I would try to increase the current on the Y stepper driver a bit.

@stigberntsen9301 3 жыл бұрын

Hi Chris, is the mounting plate for the hot-end the same? Would a direct drive KIT for CR-10/Ender3 series, like the MicroSwiss fit on the V2?

@ChrisRiley 3 жыл бұрын

I "think" it is the same, but next time we have a stream, remind me and we will check.

@lunchbox468 3 жыл бұрын

were you testing the ender 3 v1 with a 1.1.4 board? i think they come with the 1.1.5 now.

@marswood5859 3 жыл бұрын

No still 1.1.4.

@ChrisRiley 3 жыл бұрын

This one has the 1.1.4.

@kelsonk3660 2 жыл бұрын

Hey there so this is an odd question, but could you zip the test files for the Ender 3?(mainly the dog) my sd card that came with the printer corrupted and I lost the test files. Thanks man!

@ChrisRiley 2 жыл бұрын

I will have to look around and see if I still have them.

@kelsonk3660 2 жыл бұрын

@@ChrisRiley dude thank you so much!

@ChrisRiley 2 жыл бұрын

@@kelsonk3660 Hey, I couldn't find one I had that still had stock files, but I found this. github.com/Creality3DPrinting/Ender-3/tree/master/Ender-3%20SD

@kelsonk3660 2 жыл бұрын

@@ChrisRiley thank you!

@user-xc9do2ly1y 3 жыл бұрын

would you recommend a stock v2 or an ender 3 pro with modification

@ChrisRiley 3 жыл бұрын

They wouldn't be to far from each other really. Which ever one is the best price, I would go with that.

@JoeGameVideos 3 жыл бұрын

what program i need for editting stuff i dont know if sketchup works but i know you need certain 3D program but doubt it would be any free ;/ i mean next of paying the printer

@ChrisRiley 3 жыл бұрын

You mean to edit STL files? I use Fusion 360, they have a free tier.

@JoeGameVideos 3 жыл бұрын

@@ChrisRiley ok i just might go for the V2 watching a youtuber named Tomb of 3D Printing Horrors giving some pro build tips to stabilize etc. Does this V2 contain tools aswell next to that how many diffrent filements can fit in there like wood for example i want to use this for contraptions like mouse traps etc. Personal projects that can make future money for example.

@ChrisRiley 3 жыл бұрын

@@JoeGameVideos Yes, it comes with tools. It can handle most filaments. You might need a hardened nozzle for fill type filaments.

@JoeGameVideos 3 жыл бұрын

@@ChrisRiley what is fill type filaments?

@ChrisRiley 3 жыл бұрын

@@JoeGameVideos wood fill, metal fill, carbon fiber.

@herr_rossi69 3 жыл бұрын

H Chris, do you know a way to activate Mesh Bed Leveling on the Ender3 V2. The problem is the LCD. Maybe through Octoprint? Is for the son of a friend and a Bltouch is unfortunately too expensive. I thought I would ask you. If you don't know it won't work ;-)

@ChrisRiley 3 жыл бұрын

I am not sure if it is enabled by default, I think it would take a firmware flash.

@herr_rossi69 3 жыл бұрын

@@ChrisRiley But then flashing the Firmware you can not enable the new LCD screen. It was a special Creality Thing in the Firmware

@ChrisRiley 3 жыл бұрын

@@herr_rossi69 Check out CHEP on youtube, he would have something or know how to do it.

@risscaas 3 жыл бұрын

I have na ender 3 board 1.1.4 and bought a BlTouch smart V3.1 (original). Did everything followed every step and even check a few youtube vídeos, everything worked fine! Until the first print… Resuming: the printer ignores the Z offset, the value is there but it’s ignored, and either prints in the air or crashed with the build plate… I tryed intalling a Marlin 2.0 but the cable that came with the bl touch kit uses a usbHID driver and not usbASP and I can’t connect with the printer in order to install a bootloader… Can anyone give me any hint?

@ChrisRiley 3 жыл бұрын

I think we resolved this via email.

@subseauk 3 жыл бұрын

Hi Chris, I am having real problems with my ender 3v2 which no one has been able to solve as yet!!! I have purchased a Bondtech BMG with a 3:1 gear ratio. Bondtech say you should enter 415 on the e-step setting and you should be sweet. However!!! When I've done this and then command 100mm move on the extruder motor via the screen it pushes 80mm and takes 15-20 times as long to do it. Can you help please????

@ChrisRiley 3 жыл бұрын

Hmmm, what is the stock e step setting on the v2?

@subseauk 3 жыл бұрын

@@ChrisRiley Hi Chris, the stock/default was 93 but I was running with an all metal replacement extruder at 139, the new Bondtech has instructions for 315. cheers

@TheDarvec1 3 жыл бұрын

Had mine nearly a month now (V2) and i've just found out that linear advance does not work on these silent drivers..which is exactly what a bowden tube setup needs.

@ChrisRiley 3 жыл бұрын

Yeah, 2208's don't like it at all. That is a downside to these for sure.

@MrSpeakerMBurns 3 жыл бұрын

I love the polypropylene build surfaces such as the Mamorubot. Best surface I have ever printed on! It takes some dialing in, but it is by far superior to anything else I have tried. I use it on all of my FDM printers.

@ChrisRiley 3 жыл бұрын

I've never checked one of those out. I'll have to try it.

@MrSpeakerMBurns 3 жыл бұрын

Chris Riley This product is amazing! It has my full endorsement for whatever it’s worth. www.mamorubot.com/

@MrSpeakerMBurns 3 жыл бұрын

Chris Riley www.tinymachines3d.com/products/polypropylene-build-plates-for-3d-printers

@MrSpeakerMBurns 3 жыл бұрын

Chris Riley I use Aquanet hairspray for adhesion. I love printing with PETG on these. The part cements itself to the build plate while it’s hot, pops off almost on its own when it cools. No scraper needed, no damaged prints. Smooth finish on the bottom of your prints. Amazing material!

@ChrisRiley 3 жыл бұрын

@@MrSpeakerMBurns Thanks for the link man, I am going to try it out.

@kristoferkrus 3 жыл бұрын

Isn't it possible to just upgrade the drivers on the V1 to get them on par with the drivers on V2?

@ChrisRiley 3 жыл бұрын

Sadly no, the are integrated with the board, so you have to replace the whole board.

@andoter8004 3 жыл бұрын

What printer do u suggest for a new time printer? Budget 250

@ChrisRiley 3 жыл бұрын

It you like to mod, hack and tweak, the Ender 3 is the way to go.

@TheCubingChronicles 11 ай бұрын

Wher is the cheapest place to buy an Ender 3 standard uk?

@ChrisRiley 11 ай бұрын

Hopefully, someone in the UK here will know.

@mpcbsar 3 жыл бұрын

Would love a comparison between the ender 3 pro and v2 also pls.

@ChrisRiley 3 жыл бұрын

If I get a Pro I will make another video.

@GaryJWright 3 жыл бұрын

@@ChrisRiley no need as a they are same basic frame and parts with a different screen and hot end cover, tbh Owning a V2 myself - i'd wish i'd bought the PRO and done mods myself.

@thebooboo3269 3 жыл бұрын

@@GaryJWright the motherboard is a big deal and you can see the quality increase v2 owner here

@gergthewerg Жыл бұрын

I ended up getting a v2 as my first printer. I have used the v1 a few time before but overall I think I like the v2 better. My only complaint right now is no auto leveling, plastic extruder, and and no filament runout sensor. But I've seen someone turn the z axis switch into a filament runout sensor when they got an auto leveler which solved 2 of the issues

@ChrisRiley Жыл бұрын

The ABL is pretty easy to do. Check out this video. kzfaq.info/get/bejne/rsumfa-Z1JnKnJc.html Thanks for watching!

@gergthewerg Жыл бұрын

@@ChrisRiley i actually bought one yesterday! Planning on turning the z axis limit switch into a filament runout sensor

@haryantifrateur6678 2 жыл бұрын

I found a ender 3 en v2 for the same prize which one should I get?

@ChrisRiley 2 жыл бұрын

V2, better power supply

@immanuelraynaldo717 3 жыл бұрын

The new v1 cost around 150$ and have that 4.2.2 mainboard with silent driver, so should i get v1 to save 100$?

@ChrisRiley 3 жыл бұрын

Yes, I would save the money if you get the 32bit board.

@TheBojengles 3 жыл бұрын

Doesn’t anyone know if the screen from the v2 can be plugged in and used on an Ender3Pro?

@ChrisRiley 3 жыл бұрын

Not sure the board in the pro would support it.

@d4rkblizz4rd0 3 жыл бұрын

if you use an 4.2.2 or 4.2.7 board on Marlin 2.0 then yes

@TheBojengles 3 жыл бұрын

D4rk BliZz4rd thank you. I’ve been wanting to upgrade to a silent board anyways.

@Crushercorp 3 жыл бұрын

Not sure I understood well, I thought the 40X40 bottom pillar, the 32bit board and the updated power supply would cost me the price difference between V1 and V2. I also thought that the board and power supply was top in the list of replaced part for tinkerers.

@ChrisRiley 3 жыл бұрын

You might be able to get it a bit cheaper for the v1. Power supply really isn't that big of an upgrade, but the MW will last a lot longer.

@koapg3d59 2 жыл бұрын

Where can I buy filament for these for a cheap price?

@ChrisRiley 2 жыл бұрын

I buy all mine from Printed Solid. www.printedsolid.com/collections/jessie

@rj795w6 Жыл бұрын

thank you

@ChrisRiley Жыл бұрын

Thanks for watching

@desertratfpv9936 2 жыл бұрын

1 year later. Does the ender 3 v1 have a 32bit processor now?

@ChrisRiley 2 жыл бұрын

I am still not 100% sure, I think all of them have the same board now, which should be 32b.

@Nezfitness777 3 жыл бұрын

Is there any quality of print difference ? Or the time it takes to print between the 2?

@ChrisRiley 3 жыл бұрын

The V2 is a bit better, but it has a lot nicer electronics/better drivers. Print time will be very close to the same.

@Nezfitness777 3 жыл бұрын

@@ChrisRiley Thanks! i ordered mine last night after watching your vid and fee others. Any must have upgrades you recommend ?

@ChrisRiley 3 жыл бұрын

@@Nezfitness777 The first thing I would look at is some cap tube and couplers. www.captubes.com/shop/#!/TL-Creality-Kit-1-Meter/p/123266976/category=24343139

@Nezfitness777 3 жыл бұрын

@@ChrisRiley Appreciate it !

@TheMrBrksi 3 жыл бұрын

My Ender 3 arrived a week ago, I chose standard version because of price difference. Standard was on sale with 20% lower price than it normal was. Only thing that I would like is better stepper motor controllers of V2. Other stuff I printed out, and turns out better - feeding wheel for example, no woble on printed part. Also it's very fun to upgrade and watch your printer grow. =)

@ChrisRiley 3 жыл бұрын

That's great! Good luck with your projects!

@semhopman4531 Жыл бұрын

Im getting a v2 in 3 Dwyer someone have some tips for me?

@ChrisRiley Жыл бұрын

It's a pretty solid machine, give the test Gcodes a try and see how it goes.

@aaronward6092 3 жыл бұрын

Can we get the torture cube STL

@ChrisRiley 3 жыл бұрын

www.thingiverse.com/thing:1850320

@CheeseDoodle 3 жыл бұрын

How does this compare to Ender 3 Pro?? It slightly more expensive, and I can't choose

@ChrisRiley 3 жыл бұрын

I am not sure on the Pro, I don't have one, but just make sure whatever you get has the 32bit board.

@cagilundar 3 жыл бұрын

How don't you have seam? I have z seams.

@ChrisRiley 3 жыл бұрын

Set your seam to nearest in the slicer.

@feral7094 2 жыл бұрын

I wanna grab the V1 so bad as my first printer, it's on sale on amazon for $250 canadian. Kinda nervous about putting it together myself, I can build pc's but this seems way more advanced

@ChrisRiley 2 жыл бұрын

No, you got this, it will be easy.

@rageejgaming2147 3 жыл бұрын

is this 12v power supply?

@ChrisRiley 3 жыл бұрын

Both are 24v.

@cdsmakestuff 3 жыл бұрын

Why no comparison with the ender 3 pro... has some of the V2 upgrades but only costs $20-$30 more than the V1.

@ChrisRiley 3 жыл бұрын

Sadly I don't have one.

@secretgaminguk9806 3 жыл бұрын

I'm still stuck on what one to buy :(

@ChrisRiley 3 жыл бұрын

Go with V1, save the money for mods. :)

@kermitdafrogisback 2 жыл бұрын

Love the Back To The Future 2 reference, about 1:20 in.

@ChrisRiley 2 жыл бұрын

🙂

@ariselouk7555 3 жыл бұрын

I’m still unsure about which to pick will I be fine with the v1?

@jjt229 3 жыл бұрын

I myself decided to buy v1 as a beginner. Its 100 € cheaper for me. It works great and helps you decide if you want to stick to 3d printing or not. In case you won't like it, you haven't spent that much. If you love it, you can buy second, more expensive machine. Having 2 printers definitely helps if you will want to print a lot. Cause the print time is a lot more than I though. Tiny small pig takes 6 hours.

@ChrisRiley 3 жыл бұрын

I agree, I would go with V1 now.

@Boogie3D 3 жыл бұрын

Unfortunately the Creality board uses 2208s instead of the mentioned 2209s :(

@ChrisRiley 3 жыл бұрын

That is a bummer.

@yomboprime 3 жыл бұрын

I think a good old Atmel 1284 is electrically tougher than the STM32. That's perhaps a better criterion than the number of bits.

@ChrisRiley 3 жыл бұрын

That I don't doubt, it's hard to believe AVR has been around since 96'.

@studiovulcan4411 3 жыл бұрын

Someone is selling an Ender 3 V1 near me for $150. Is it worth buying, or too old to get into now and there's better options out there now?

@ChrisRiley 3 жыл бұрын

I think the Ender 3 v1 for $150 is still a good deal.

@studiovulcan4411 3 жыл бұрын

@@ChrisRiley I bought the elegoo neptune 2 for 160 on Amazon!

@whybothertry8642 3 жыл бұрын

I think I'll get the ender 3 pro, is it worth it?

@ChrisRiley 3 жыл бұрын

For the money, I think so.

@whybothertry8642 3 жыл бұрын

@@ChrisRiley I think it will be over the original ender 3 for only £15 extra

@destroyer2012 3 жыл бұрын

The tolerance test doesn't tell you anything about the quality of the printer. You can easily change filament diameter in software and line width and flow rate to get it to come out however you want on any printer.

@ChrisRiley 3 жыл бұрын

This is true, but it is valid with a side by side with the same gcode.