Creality Ender-3 V3 - Core XZ 3D Printer

Creality Ender-3 V3 - Core XZ 3D Printer - Unbox & Setup

Рет қаралды 17,320

Күн бұрын

Amazon Links
Buy it here: geni.us/F2AYv9
Recommended: geni.us/JustVlads
SainSmart Official: bit.ly/49lQr5a
www.sainsmart.com/products/cr...
Creality Ender 3 V3 3D Printer, Core XZ for Max. 600mm/s Printing Speed, Integrated Die-Cast Aluminum Alloy, 60W Ceramic Heater Hotend, Dual Mighty Cooling Fans, 220*220*250mm
CoreXZ Motion System:
The CoreXZ Motion System of the Ender-3 V3 combines the X and Z axis, enabling two high-torque motors to work together for rapid response. With a printing speed of up to 600mm/s, the Ender-3 V3 is 12 times faster than a regular i3-style 3D printer, setting a new benchmark for bed slingers.
New Top-notch Extruder Kit:
The Ender-3 V3 features an extruder kit with a bolster spring and a ball plunger. This enhanced direct drive extruder grips filament tightly, ensuring clog-free extrusion for up to 1000 hours. With a 60W ceramic heater, it can fully melt high-temp filaments like ABS and PETG on the fly.
Stable Design:
The gantry and base of the Ender-3 V3 are made of a single integrated die-casting aluminum alloy piece, making it incredibly solid and stable. The printhead has front and back fans to cool the printed section rapidly and evenly, eliminating drooping, warping, and stringing. Printhead fans are dynamically balanced for reduced vibrations.
User-Friendly:
Setting up the Ender-3 V3 is a breeze with its auto-calibration feature. No need to pull a paper or turn any screws. Highly pre-assembled modules allow first-time 3D printer users to assemble it within 10 minutes.
Creality OS & Superb Software: The Creality OS enables advanced functions like linear advance and it is open-source so that anyone can customize it. The Creality Print slicer features smart cooling, optimal retraction, slim tree supports, etc. It also allows users to manage a print farm efficiently and data securely. With Creality Cloud, you can get a vast number of free 3D models and enjoy cloud printing.
Guide: Unveiling the Ender-3 V3 Series - bit.ly/3uGgx4G
As an Amazon Associate I earn from qualifying purchases
Join Memberships to support this channel:
/ @justvlads

Пікірлер: 51

@JustVlads 5 күн бұрын

Buy it here: geni.us/F2AYv9 Recommended: geni.us/JustVlads

@ftw2011fyi 2 ай бұрын

Man finally I was so looking forward to your video!!! You channel is awesome! I have watched a lot of your videos to check what the machines can do. Wishing you lots of success!

@pridedyanky Ай бұрын

It's great seeing how far all these printers have come.

@user-ql4mp9ov6m 2 ай бұрын

Amazing printer， I love it， thank your video😊

@yoopboyclutch4250 10 күн бұрын

37:20 “As far as the layers go, they look all look pretty good for being black.” 😂 Good stuff man, I appreciate your vid, it helped me a lot.

@edbot3266 2 ай бұрын

Great video!!!

@dacumatrix 2 ай бұрын

to resolve your issue, have you tried to remove your filament and rotate so that the spool picks from the top, not from the bottom, hence it wont tangle and goes to the back when it unspool

@b4dm1n 2 ай бұрын

I have started with creality but since i bought bambu lab a1 mini fell in love with 3d printing again. Bambu is on another level

@yobtnirp 2 ай бұрын

I started with an ender 3 pro, it was a great printer but Bambu lab is in another level. To be fair creality has come a long ways

@tek9058 2 ай бұрын

it's just the apple of 3d printers for now with lack of a new model each year. that's why creality will take over with the k2. creality lets the community do the work. community is 10x faster.

@yobtnirp 2 ай бұрын

@@tek9058 that’s a good point

@Andrew-hr5on Ай бұрын

@@tek9058 I started with Ender 3 1 with nob etc like the very first ender and i sold them to buy v3 Core XZ . my GOD its like going from apple 1 to 13 . I was told if you think its good wait till you put on full on klipper.. i wonder if i buy the filemant dryer as well maybe buy the cover ?? it would basically be K1 i got the v3 plus on order also

@xutaokiki Ай бұрын

Bambu lab engineers come from DJI team. That's why bambu lab is on another level.And bambu printer design and style is very similar to DJI.

@GDM1787 2 ай бұрын

Great printer.

@samirjaffer1351 Ай бұрын

I’ve got this and after 1 week of successful printing I’m having constant issues with failed prints with fault code 2000 and sometimes 111. Wish I just went for the Bambu p1s now.

@wingdoeschill 2 ай бұрын

"Here we have a Squirtle which is Turtle/Squirrel I guess" Not making fun, but that is funny because it can be confusing if you have not heard of Pokemon before

@RileyJSW 7 күн бұрын

Do you have any recommendations on speed and acceleration? I can’t seem to find a good medium between good prints and semi quick prints.

@abielmanchego2270 2 ай бұрын

I think in your next video. We should make a highway bridge for 1 64

@Condamine123456 2 ай бұрын

Creality is all good until something breaks and you need support and they should use a psu that doesnt require you to change it

@maxsteamengine5986 2 ай бұрын

Just wondering what you do with all of the reviewed printers?

@float32 2 ай бұрын

Some say they’re all attached together, and walk down the streets at night, leaving a trail of spaghetti and little boats.

@circle_vr5536 Ай бұрын

THANK YOU I COULDNT FIGURE OUT HOW TO DO ANYRHING

@GDM1787 2 ай бұрын

Bambu & their invasive network plugin made the decision for me…Creality for the win!

@rubiskelter 18 күн бұрын

What do you mean about network plugin?

@swapnil321you 2 ай бұрын

Can you connect a timelapse/ web camera to this printer?

@pridedyanky Ай бұрын

Yeah you can

@ianisgg8604 Ай бұрын

Hi man, I wanna buy my first 3d printer for helmets props maybe some smaller things idk and I was thinking about the Elegoo neptune 4 plus but now I saw this one and idk which one is better could you please tell me or if you know another one in that price range please let me know because I want to buy it this month

@diiogolince5343 Ай бұрын

Same position here bro.. iam lost on this. So confusing for a beginner

@ianisgg8604 Ай бұрын

@@diiogolince5343 well i bought the neptune 4 plus in the end and today it came just started printing my first benchy

@spencerbair1137 Ай бұрын

The Neptune 4's, last I heard, had some pretty serious klipper (basically an external software that helps speed things up) issues. The Ender 3 V3 Plus just came out, and it, like this, is a great helmet class printer. Would recommend over the Neptune 4 at the moment. But honestly though, the Elegoo Neptune 3 max is also great, albeit slower. If you just want an absolutely massive build plate for a good price, that's the one to go for.

@nemro9776 2 ай бұрын

What’s the difference between a corexz and a bedslinger?

@TheGeordietheWitchandtheWench 2 ай бұрын

bedslinger means the bed moves back and forth. corexy the bed moves from the top down to the bottom ;-)

@OclateGaming 2 ай бұрын

same, other than the z and x axis are in a motion system similar to a core xy. Bed still moves back and forth, but the z and x axis are connected together with a belt.

@dustboii 13 күн бұрын

Returned this and ordered a bambu mini a1. This thing was borked withing the 4th or 5th print for me. Walked out of the room and heard loud grinding and slamming noises. Came back to it slamining violently into both bars and when I restarted it and tried to get it to print a benchy it was like it went retarded. Was trying to move where it couldn't. Not great for someone not wanting to tinker.

@Declopse 2 ай бұрын

You said the layer lines look clean. I would suggest you look again, because it's terrible

@vitaliydj5929 2 ай бұрын

You are right! The calibration cube looks awful. What are these vertical lines on headphone holder side surface? What is that kzfaq.info/get/bejne/fdGPo8yQxLfUaGg.htmlsi=_j8dvqpYCw6Wc6qk&t=2245 ? My Ender3 from the first batch running klipper can do not ideal surface but much cleaner than that. There too many VFA... The K1 can do much better than that. Probably there are no reason to pay more for the print quality of the low end printers.

@gtrargh6637 Ай бұрын

@@vitaliydj5929 man if i can show you my cube its different mines way better the local storage has a different cube and a new firmware has come out. BTW there are 2 motherboards with this the old version and new version.

@user-me2zb1bz3u 2 ай бұрын

K1 + A1 = E3V3

@3D_Printing 2 ай бұрын

K2 by Creality a BamboOOOo killer; 350 cube build, multi colour enclosed, FAST, 800m/s etc... SOON

@spencerbair1137 Ай бұрын

K2* Just came out!

@3D_Printing Ай бұрын

@@spencerbair1137 I heard 31st July

@spencerbair1137 Ай бұрын

@@3D_Printing K2 Plus is currently on preorder. Fairly large discount. 30,000mm/s^2 accel, 600mm/s speed. CFS (creality filament system) up to 16 colors like bambu. New extruder and more. Maybe K2 Max or just base K2 Jul 31?

@3D_Printing Ай бұрын

@@spencerbair1137 great, also some to win

@3D_Printing Ай бұрын

@@spencerbair1137 Creality K2 Plus Combo 3D Printer ￡767.40￡1,279.00 Save ￡511.60