Create Perfect Inlays Every Time | Onefinity CNC Woodworking Projects

Рет қаралды 35,214

Sothpaw Designs | Become A Better Woodworker

Күн бұрын

Watch this video to learn two great methods for creating CNC inlays, from beginner to advanced. Set yourself apart by creating custom woodworking projects, gifts and cnc projects using the Onefinity Woodworker CNC, or a variety of other CNC machines.
Have questions about other CNC related subjects? See the videos and playlists below.
Check Out My First Inlay Video
• How To Make Inlays Wit...
A Comprehensive Review of the Onefinity Woodworker CNC
• Is Onefinity CNC Worth...
Want to learn more about CNC router bits? Watch this video.
• Beginner's Guide To CN...
Create a CNC Project From Start To Finish
• CNC Woodworking Projec...
Learn To Create A CNC Project In Minutes With Easel
• Video
Set Up Your First CNC Project On Your CNC Machine
• Is The Onefinity CNC R...
Chapters
00:00 Introduction
00:43 Using VCarve Pro - The Easy Way
02:35 Using the Onefinity To Create Easy Inlays
04:08 The Easy Way - Results
04:45 Using VCarve Pro - The BEST WAY
06:34 Using the Onefinity CNC To Create Better Inlays
10:15 The Results
Tools and Materials Used In This Video
Makita Palm Router - amzn.to/3qNuvfi
CA Glue and Accelerator 4 Pack - amzn.to/3SdnfW0
2.5 Inch Dust Collector Hose - amzn.to/3BMVmhR
1/8 Inch Downcut Bit - amzn.to/44hP4Cl
60 Degree V Groove Bit - amzn.to/3doCUTw
Odie's Oil - amzn.to/3Jtzewo
Wanna see the detailed overview of using V Carve Pro to create inlays? Check out Greg's Garage and his great video. • V-Carve Inlays - Detai...

Пікірлер: 45

@SothpawDesigns Жыл бұрын

Interested in my CNC related content specifically? I've decided to launch a CNC Projects Playlist, which is an easy way for you to see new CNC projects, design files, and techniques, as soon as it's launched! Hope you enjoy it! kzfaq.info/sun/PLQ7n44jxkajY-1Uu3st5JnJu1ii7_8wz_

@NWGR Жыл бұрын

I know a lot of people love the exotics like purpleheart, wenge, cocobolo, etc. But I just love cherry. I love everything about it. The way it looks, how it machines, the smell of it, how beautiful it looks with a nice finish, it's just amazing. Plain maple too.

@bobswihart Жыл бұрын

Had to save this one. I have not done an inlay yet and plan on trying it sometime when I have time. Thank you for sharing. 😊

@SothpawDesigns Жыл бұрын

Hope you enjoy it! The v bit method really is easy as long as you make your files properly.

@bubba6945 10 ай бұрын

I like ash. its a really white colored wood and easy to find materials that contrast with it

@Tensquaremetreworkshop 11 ай бұрын

Really good explanation and comparison. Just started doing inlays, and this was very useful!

@AlienLeader4 Жыл бұрын

Great video. Lumber species Purple Heart, Sepelle, Leopard, Red Heart are some great choices. Keep up the great work. 👽

@SothpawDesigns Жыл бұрын

Never seen leopard. Sepele seems to be a popular one. Gonna have to get some!

@davidcochran934 11 ай бұрын

Great video. Always enjoy watching. I like the first method for doing name puzzles. Usually have to add a little allowance for space for piece to come out but works great. Method two is definitely better for inlays. And the bandsaw made me very nervous at first too. haha

@tpsooner7816 5 ай бұрын

Great video! Thank you.

@SothpawDesigns 5 ай бұрын

Glad you liked it!

@roblehmann2378 5 ай бұрын

Great video. Thanks for sharing

@SothpawDesigns 5 ай бұрын

Thanks for watching!

@ForvoQuizlet 8 ай бұрын

Shop for padauk. Jumped here after reading the Medium article. Thank you!

@tiabs 3 ай бұрын

New subscriber.... "It's gonna make somebody mad, and that makes me laugh."

@SothpawDesigns 3 ай бұрын

😂😂😂😂😂

@dannypetersen1377 8 ай бұрын

Just subscribed great videos

@MarkLindsayCNC Жыл бұрын

Nice video! Thanks for the heads-up comparison of the 2 methods! My favorite woods to carve are walnut and sapele. Sapele can have some pretty spectacular flame to it, depending on the cut. They both carve like butter and finish great. I also like hard maple and cherry. Maple used to be my go-to, but I've been doing a lot more cherry projects here lately.

@SothpawDesigns Жыл бұрын

I love walnut, and have done several projects with it, but I've never used Sepele. I've seen it in several projects online, as well as seeing it at Woodcraft. I'll put it on the list!!

@switz11 Жыл бұрын

Your videos are very informative. Thanks

@SothpawDesigns Жыл бұрын

Thank you.

@raytristani 10 ай бұрын

Oh no!!! Make and female!! The horror😂 Great video. You earned a subscriber!

@SothpawDesigns 10 ай бұрын

😂😂

@rb67mustang 10 ай бұрын

I'm a retired machinist, and so, what's wrong with the small radius? The letter is still the same font with an ever so slight radius in the corners. I would've purposely made the Male letter with the same corner radius as the Female pocket has.

@negromalunch Жыл бұрын

Great vid

@SothpawDesigns Жыл бұрын

Thank you!

@stuartgray5877 9 ай бұрын

I subscribed immediately after the "male female" reference! 😂

@SothpawDesigns 9 ай бұрын

YES!!!

@af2001 Жыл бұрын

Good afternoon

@danielstein8320 5 ай бұрын

I see you have Lightburn installed and in your link tray at the bottom of your screen. I use Lightburn for my Cad Design? Please explain thge workflow using Lightburn. Thank You!!!! Dan

@SothpawDesigns 5 ай бұрын

I'll work on that.

@kevinrich4637 Жыл бұрын

Nice video…new subscriber just because male/female because it will make someone mad! Perfect 😂 I like to use spaced maple and walnut

@SothpawDesigns Жыл бұрын

Love it!!

@modelistajose Жыл бұрын

Hello, it's nice to meet your channel, I've reviewed your videos, I have a question, is there an option in V Carve Pro, or the Shop Saber software, for my cnc machine to do a vaccum cleaning on the plant after performing a project? I also have a big question, how do I configure V Carve Pro, or Shop Saber, to keep the same configuration when I have to make many cuts the same.

@SothpawDesigns Жыл бұрын

Regarding question 1, I'm not sure what you're asking. Regarding question 2, if I understand what you're asking, you can simply duplicate the shapes, then repeat the toolpaths as many times as needed.

@justinbanks2380 Жыл бұрын

"I'm gonna keep calling them make and female, because I know it will make someone mad. And that makes me laugh." 🤣 It always amazes me people get offended about that when we're literally talking about inanimate objects and have used this type of terminology for decades for screws, plugs etc. Lol

@josephlanglois8073 3 ай бұрын

Sir., did u use 1/4 em on both cuts.

@SothpawDesigns 2 ай бұрын

@RobsReels 10 ай бұрын

I liked your video. I just was a little worried about your fingers there by the band saw. But we're men we could handle it. I have seen other people just reattaching to their CNC and let the CNC cut it off. Anyway, good video

@SothpawDesigns 10 ай бұрын

Good point! I didn't feel that I was too close, but I'm new to a bandsaw, so you could be right. You're correct that I could have just cut it out on the CNC, which I hadn't thought about. Good call.