How To Repair A Cold Spark Machine (CryoFX® Cold Spark Machine Repair)

Рет қаралды 12,516

Күн бұрын

How to repair a cold spark machine the right way! Indeed, here we show you what a cold spark machine repair looks like, inside a cold spark machine and out.
More info & Cold Spark Machine products: ★ www.CryoFX.com ★
We discuss diagnosing symptoms of a non-working cold spark fountain, or cold fireworks as they are called. Whether you have a DMX issue, clogged cold spark machine, and of course how to clean a cold spark machine when it gets stuck.
Here’s a breakdown of specifics:
00:00 - Intro
00:20 - Types of problems with Cold Spark Machines
00:46 - Wireless Remote Issues
01:18 - Blower Only Blowing
01:32 - Most Common Issue And How To Prevent Clogging
01:56 - Heating Element Issue
02:55 - Inside A Cold Spark Machine - Safety Before Going Inside
03:29 - Heating Element
04:05 - Removing The Fan Wire From Circuit Board To Allow Cold Spark Machine Case To Be Detached
05:05 - Backtracking for Example - How To Remove The External Case & What Screws To Remove
05:30 - Remove The Case Ground Wire
06:16 - Removing Cold Spark Machine Case
06:40 - Clogged Heating Element - How To Unclog
07:50 - LINK TO CLEANING COLD SPARK MACHINE
08:10 - Removing The Drive Belt / Chain
08:35 - Removing The Heating Element
09:00 - Removing The Top Reservoir
09:30 - Disassembling The Reservoir & Funnel
10:13 - DO NOT USE SOLVENTS
10:40 - Removing The Heating Element Continued
11:05 - Disassembling The Heating Element & Corkscrew
11:30 - Showcasing A New Heating Element
11:56 - Ground Wires
12:30 - Where Heating Element Connects To Circuit Board
12:50 - How To Further Disassemble Heating Element
13:20 - How To Clean The Internal Heating Element Cork Screw
14:05 - Reassembling Heating Element Core
14:49 - Reassembling Heating Element Into Cold Spark Machine
16:05 - Reassembling The Drive Belt / Chain
16:48 - Reassembling The Top Reservoir
18:00 - Reattaching The Cold Spark Machine Case
18:30 - Reattach Ground Wires & Fan
18:50 - Reassembling Outer Case & Top
In other videos on the channel, we cover cold spark powder information, how to clean a cold spark machine, cold spark machine granules and of course how to use a cold spark machine. The cold spark machine instructions given here are detailed around an iSparkFX mini cold spark machine mini, however this can serve purpose to the other spark machines on the market as they are all the same when it comes to functioning, major components, and cleaning processes involved.
This is also a great explanation on what a cold spark machine case is and how one works as well as we cover the inside of a cold spark fountain and it's working parts.
More info & full list of products: ★ www.CryoFX.com ★
Follow CryoFX®
★ IG - /
★ FB - / cryofxllc
CryoFX® video shows you How a Cold Spark Machine works and Cold Spark Machine Repair and Cleaning.
Cold Spark Machine & Cold Spark Fountain: www.cryofx.com
So when selecting a cold spark machine wedding effect, or just a simple cold spark fountain, you need to consider price. Regardless if it is a prox blitzz, phoenix, pro blitzz spark machine, showven, or iSparkFX cold spark machine, we cover the details on cases here as all machines function relatively the same and can be used similarly with cases.
Disclaimer: CryoFX® assumes no responsibility for the content contained within this video. This video submission is the property of CryoFX® and in no way does CryoFX® authorize reproduction, in whole or in part of any portion of this video. This video submission is used to show product performance of a CryoFX® Brand Co2 Special Effects System and is not intended to show how said product is to be used. By viewing this video, you agree to hold CryoFX® 100% NOT liable for any occurrences resulting from watching or attempting to replicate what is shown herein. All Co2 Special Effects products, Co2 Cannon products and Cold Spark Machine / Cold Spark Fountain products should be used by a trained professional.
#ColdSparkMachine #ColdSparks #CryoFX

Пікірлер: 43

@Cryofx 3 жыл бұрын

Thanks for watching! Comment questions and we will be sure to answer them! More info available here: CryoFX.com

@timbrownproductions11 Жыл бұрын

Great Video!! Really informative and it helps to see the unit unboxed.

@davidchamberlain3838 11 ай бұрын

Very helpfull thank you for sharing such a good video .. manufacturers should hire you to do there videos on maintenance ... well done .. needed info for 2 of my cold spark machine ... and i think by looking at this i see what could be the issue but didnt know we had to clean them like this 😂😂 like i sais very usefull information

@jodasingh2345 3 жыл бұрын

VERY HELPFUL!!! This video was a life savor for me!! Thanks for sharing and making videos!!

@Cryofx 3 жыл бұрын

Thank you. More to come!!

@mukhtar052000 2 жыл бұрын

nice

@bidon7701 Жыл бұрын

I'm just curious about the temperature of the heating element. Can you tell us ?

@gabrielchdj7852 3 ай бұрын

tengo unas que si conecto mas de 2 hace saltar la terminaca, si pongo 2 hay veces cuanto estan calentando salta, vuelvo a subir la termica y andan sin problema, que puede ser?

@oscarmendoza8760 3 күн бұрын

My machine keeps having a E4 time error. How do I resolve

@roman25610 Ай бұрын

why is the green ice on the panel flashing? but the external control shows that everything is working ok - but the machine is not working?

@mvick21385 2 жыл бұрын

The gears make a lot of noice. Anyway to fix that? Or can u use a lil grease?

@noeibarra8610 2 жыл бұрын

Is there a certain temperature I should turn it off?

@jeromeo6911 2 жыл бұрын

My machine stays on the warming up mode. I can only assume the heating element is bad. I can't find where to buy the part. Any guidance would be appreciated

@leidyjohanaestradapalomo6903 Жыл бұрын

Hola saludos una de mis vevor no enciende que debo hacer solo se ve rojo e boton de encendido y apagado Alguna solución?

@noeibarra8610 2 жыл бұрын

I’ve used my machines a few times. They are fairly new. But they have a hard time heating up and don’t heat up to 500 like they should. You think it’s the heating element?

@chorizogrande8340 Жыл бұрын

Can you tell me where can I get a replacement heating element from?? I have the vevor 700w machines, thanks 😊

@Cryofx Жыл бұрын

Yes, CryoFX sells heating elements for the machines, as well as other spare and replacement parts: CryoFX.com and search "spark" Heating element www.cryofx.com/cold-spark-machine-heating-element-cold-spark-fountain-heating-element.html

@jacobjimenez6205 Жыл бұрын

My cold sparks are coming out of the little hole on the heating element do you know why or how I can fix it?

@19Jose91 2 жыл бұрын

Yo guys, my sparks maxhines dont seem to suck the powder, but the mechanism works perfectly, I feel like the powder is wet and it’s not flowing as it should be.. but I opened a 2 sealed bags already and same.. any ideas??

@rylightbourne 2 жыл бұрын

Hello, my machine keeps saying error 5 we think it’s the temperature sensor. Can you help?

@rggila1955 6 ай бұрын

how can I contact You guys ? I have 4 Cold Spark Machines I think the motherboard might be the issue. Basically They are brand new maybe used 7x. They heat up and go off without me pressing the button on the remote but not always.

@rentalsoundsystem8440 10 ай бұрын

HELLO! We also have a problem with this model! E4: TIME ERROR appeared Can you help us how we can solve this error? thank you very much !

@torireigle4623 3 жыл бұрын

One of my machines keeps tripping the breaker… HELP

@bryanaguilar6966 3 жыл бұрын

What if we insert the granules in the hole where sparks fly out? Had this happen today

@TeyYoung Жыл бұрын

did you ever figure that out? I'm having that problem sadly lol

@VIDEOSPACHANGA 2 жыл бұрын

Is there a site I can order parts from? The heating element on mine doesn't work anymore.

@mjeevents2758 2 жыл бұрын

Following

@kvnkrz271 2 жыл бұрын

your supplier is your best bet! Do you have the same machines as in the video?

@Cryofx 2 жыл бұрын

www.cryofx.com/cold-spark-machine-heating-element-cold-spark-fountain-heating-element.html

@djkaz4289 2 жыл бұрын

Is there a quick way to test the heating element with a multimeter? My machine is not heating, but I do not believe the heating element has gone out it shows just under an ohm resistance. If the heating element was bad I would assume that it would show open. Also what should the voltage be running to the heater? I am reading anywhere from 3 to 6 volts running to the heater but no more. This is a vivor brand spark machine and I would assume that the voltage going to the heater is reduced somewhat because the wires going from the main PCB to the heater PCB are fairly light. I hope that you are able to assist, thank you!

@silverfoxproductions6923 Жыл бұрын

I have the same issue from Vevor with 2 fixtures! It won’t heat above 200°F. Do you have a solution?

@djkaz4289 Жыл бұрын

@@silverfoxproductions6923 My issue was the control board. I was able to find control boards on aliexpress that, while not a direct fit, did work. I know the manuals on these are pretty basic, but I know there is a button sequence you can hit to adjust the temperature. I'll try to figure out how I did it and post

@teacsmith9184 Жыл бұрын

How can you bypass the pos rdfi crap ... you can never use all the meda and it time out 😞

@kvnkrz271 2 жыл бұрын

Can anyone share the video to repair the heating element?

@jeromeo6911 2 жыл бұрын

I'm in same boat

@majedagha9309 2 жыл бұрын

The bearing on my rod keeps jamming, I open it and loosen the bearing, clean. Run the machine it works for 5 seconds then same thing happens. Jams, any way we can clean the internals with any safe solution?

@majedagha9309 2 жыл бұрын

Or do I just need a replacement piece

@mfpro6204 2 жыл бұрын

hello my error E008

@DJ.Kvn_ 3 жыл бұрын

How many are you guys connecting to a single circuit?

@Cryofx 2 жыл бұрын

Hi, this depends on machine power draw (watts). Amps*Volts=Watts (Also as W/A=V and W/V=A). Circuits only should support 80% load. 15amps*0.8=12amps available (with nothing else on the circuit). Therefore, if you have a 500w cold spark machine, and its on a 120vAC circuit, this equation would be: 500w/120v=4.1666Amps EACH machine is drawing. Then 12amps/4.5 (actual 4.1666 but added extra)=2.666 machines on the circuit before popping breaker. 3 Would work but breaker may blow and it is unreliable.