Рет қаралды 87,808
Issues with high side sensing, common mode voltage and CMRR …
↓↓↓ Complete description, time index and links below ↓↓↓
First I have a look at a typical high side current sensing application using an OpAmp in differential amplifier configuration. There is also a short excursion why low side current sensing is easier but might not be desirable anyway.
Then I go over the limitations (common mode voltage, output swing) and a major drawback (common mode rejection ration) of general purpose operational amplifiers in this application. There’s some talk about dB and logarithm too.
00:00 Intro - there will be a second part
03:49 OpAmp - as differential amplifier for high side current sensing
10:24 Low side current sensing - the undesirable easy way out
12:14 Output swing - it’s either a negative supply or a rail-to-rail device
14:00 Common mode voltage - your positive supply needs to be as high as it gets
16:50 OpAmp differential amplifiers - why the short formula is a lie
21:35 Common mode amplification - the evil twin of differential amplification
24:26 Common mode rejection ration (CMRR) - the measure of evilness
27:41 Decibels (dB) - the engineers’ choice as far as units are concerned
30:41 Back to common mode amplification - from CMRR in dB
35:45 Wrap-Up - coming up next: examples and a live circuit
Tutorials: • Tutorials
Year Old Self-Build Analog Multimeter Teardown: • 37 Year Old Self-Build...
Current Sense Amplifiers (2/2): Examples and Circuit with LT6105: • Current Sense Amplifie...