Thanks for watching guys! If you plan to order anything from Currie visit this link to get 10% OFF your Currie Order and to find other great BleepinJeep only discounts: bleepinjeep.com/memberdiscounts/
@Mr.Beastforpresident6 жыл бұрын
BleepinJeep What brand & size of Cordless ratchet your using there? Seems to work nicely
@bleepinjeep6 жыл бұрын
Milwaukee
@YoungboiG196 жыл бұрын
BleepinJeep u should get a stock tj, and build it up from that, and do a video on everything thing u do to it in depth, that would be like a dream!
@Mr.Beastforpresident6 жыл бұрын
BleepinJeep I noticed on your Jeep your using some badass King Shocks. I have a few questions if you don't mind 1) Is it possible to build a 4 door Jeep with an 8 foot bed with a payload Capacity of 2,000 pounds that could do everything the new Ford Raptor can do? 2) Who is the best builder to accomplish this besides ICON? 3) What gas power train would you go with? LS3? 4) In your experience how much would it cost to be done correctly with OEM quality & durability? 5) What kind of Mpg would you guess this type of build get? I travel a lot
@evildoctor17166 жыл бұрын
Thanks for the video, truly enjoyed it just like the many others you and Matt posted in the past. When I was shopping for an aftermarket sway bar, I considered going with the Currie as well. That said I ultimately went with another company basically due to being able to fully disconnect. So my question is....are there any advantage of the Currie over others and if so, why is not being able to fully disconnect better? Thanks, and keep up the good work guys!
@JKsouthwest6 жыл бұрын
Ran the Antirocks on my TJ and loved them. Never had to worry about disconnects!
@natebleepinjeep95646 жыл бұрын
Good to hear! I've had it out on the trail twice now and I couldn't be happier!
@330JFOX6 жыл бұрын
keep the TJ videos coming !!!!!! BleepinJeep is great channel . I run a Currie 4" lift , Antilock and steering linkage on my LJ GREAT STUFF!!!!!!!
@RaneyOneTwenty6 жыл бұрын
I love the Antirock they make the jeep feel so much more stable on off camber stuff. I have an Antirock on the front of my TJ and one ready for the rear when I do an axle swap.
@natebleepinjeep95646 жыл бұрын
These anti-rock sway bars really are great investment!
@rareearthfab55116 жыл бұрын
Been running Antirocks on my JK for a couple years. One of my favorite mods everytime I watch guys laying under the front of their Jeeps in the dirt trying to reconnect their swaybars. Really work well off-road too. Would install them again in a sec!
@ebalmes6 жыл бұрын
Hey nate, Eric over here in Spokane. Just wanted you to know that your new turbo boost intro makes me smile like a kid at Christmas. Very wicked. You and matt now have the best intro.
@natebleepinjeep95646 жыл бұрын
Thanks Eric! Glad to hear you like it! It makes me smile too lol Those of us that grew up with the Fast and Furious love the sound of a good Turbo!
@wyattoneable6 жыл бұрын
That's a worthwhile upgrade for sure. I enjoyed the visual of the system working, thanks.
@boldgold3885 Жыл бұрын
Watched a bunch of videos about this. I am convinced the sway lock is the way to go that are performance on the road and off. Will see mine should be here in three days.
@Gordon87Gekko10 күн бұрын
What is the "sway loc" system you are talking about?
@boldgold388510 күн бұрын
@@Gordon87Gekko it’s the name of a company that makes detachable sway bars with the flip of a little lever. Done Wheeling flipped the lever the other way locks it back in. Punch it into KZfaq sway sway bars. That’s how I found them. Amazing set up.
@xplorationxj51387 күн бұрын
@@boldgold3885yahh... but it doesn't help when wheeling 🥴🤣
@boldgold38857 күн бұрын
@@xplorationxj5138 tell me you’ve never been four wheeling without telling me you’ve never been for wheeling
@onetruebob_tj6 жыл бұрын
Quality video installing a quality product. One of the easiest and most effective upgrades for the TJ suspension. Had mine on for a couple years now and love it. No more crawling under the rig to disconnect made it all worth it! Will be getting the rear one later this year. Thanks Nate! BTW - Shop looks great
@natebleepinjeep95646 жыл бұрын
Now that I have them front and rear I can't believe it took me so long to get them! And thanks I've been working on the shop like crazy!
@ryandaniel48606 жыл бұрын
Those bolts haven't come loose on my Jeep in over 4 years. The directions also give you the proper torque specs.
@davidicus36066 жыл бұрын
Once again another great video thank you guys I had no idea there were almost 900 videos it's going to take a long time to watch those and I guess it's like an old Harley you just got to keep checking the Nuts and Bolts
@scottgephart97496 жыл бұрын
Always learn something when I watch your vids. Thanks for showing us
@natebleepinjeep95646 жыл бұрын
I'm happy to hear it! Thanks for taking the time to comment
@YoungboiG196 жыл бұрын
Love these types of vids!!!!! More vids of the tj pls!!! And u should do a vid on how suspension systems work for jeeps and trucks, and teach us how to fabricate and build our own tjs
@natebleepinjeep95646 жыл бұрын
I'm glad you're enjoying this stuff! I have a lot more planned for the TJ and I'm starting to lean a lot more in this direction. I'm putting together a new series that will teach the basics of how a lot of this stuff works. Gas vs diesel, horsepower vs torque, long arm vs short arm. Anything else you'd like to see?
@TheBeardedJeeper6 жыл бұрын
I've been really wanting to try this swaybar setup in my JK for so long
@TheBeardedJeeper6 жыл бұрын
jrg10332 I drive with no sway bars now so I think it would be an improvement and can’t you adjust it?
@onetruebob_tj6 жыл бұрын
The Bearded Jeeper Yes, you can. Much better than stock setup, at least from my experience.
@Gordon87Gekko10 күн бұрын
@@onetruebob_tjHow about on the highway? Is it as stable as a stock JK Rubicon?
@jeffreyacton26846 жыл бұрын
Really loving the Tj videos! you do a great job Nate! wish my Tj was on this level.
@natebleepinjeep95646 жыл бұрын
Thank you very much!
@georgechambers31976 жыл бұрын
Great to have sponsors! ;-) Nice clean shop too. I really like the new opening sounds also. Great video, thanks!
@natebleepinjeep95646 жыл бұрын
Thank you! I've been trying to clean up the shop and add some lights
@Khorsathedark6 жыл бұрын
Those things look great, the install looks easy enough too.
@natebleepinjeep95646 жыл бұрын
Extremely easy install! It took more time to film it than it did to install it!
@jefflemon54976 жыл бұрын
Was great to see you in person at Evan's creek! nice rig and great guy, thanks for the swag! :)
@natebleepinjeep95646 жыл бұрын
It was good to meet you guys as well! We will have to hit a local Trail sometime. If you have Instagram DM me and we'll try to put something together. @bleepinjeepnate
@latemcire83876 жыл бұрын
Great video! I’ve been considering one for my TJ so it’s good to see an unbiased review.
@williamcordle-FLman6 жыл бұрын
Digging the diesel turbo spooling up intro sound clip
@natebleepinjeep95646 жыл бұрын
I knew there would be some people out there who would dig that! I love the sound of a turbo spooling up
@1spindlePDS6 жыл бұрын
Great job on all of your videos Nate - Keep up the good work!
@RobithicaThaGreat6 жыл бұрын
This is probably my favorite tj. Ever. Quality video btw Nate!!
@natebleepinjeep95646 жыл бұрын
Thank you very much!
@bastosreviewer51924 жыл бұрын
Try installing a JKS Flex connect sway bar link kit with that Anti Rock sway bar. Do a base line test of each and then another with both installed. Would it perform better with or without Flex connect. Would you get max flex? It would look funny but in theory I think it would give max performance in flex.
@michael-michaelmotorcycle6 жыл бұрын
Tidied up the garage it looks like. Maybe even better lighting. Great vids as always.
@natebleepinjeep95646 жыл бұрын
Trying to get as much work done in the shop and to the shop as I can!
@sodapop84086 жыл бұрын
Really cool I am gonna try that because I am not running a sway bar at all thanks for the tip just hope I can make it work on a 96 zj
@MrMrsregor5 жыл бұрын
there is also a version for the xj that might be easier to adapt but it cost a little more
@plank4073 жыл бұрын
I have been wondering how they work. Thanks for this video.
@fishrrelaxing93614 жыл бұрын
I’ve honestly just never ran away bars on any rigs I’ve had. Usually the first thing I just rip off and throw in the trash.. I don’t mind the body roll the weight is centered down low so not like you’re going to be unstable. I’ve scared some passengers in my last tj wo doors and making high speed 90* turns though lol.
@4WDTrek3 жыл бұрын
Dang! You are a tough one to rock no sways! I feel more safe doing longer trips to like Moab and rolling through those windy plains. Can't afford a trailer til I make more content for my channel!
@andrewthompsonuk16 жыл бұрын
Yet another thing you have to have to get the benefits of the raised suspension. I hate the concept of a high truck unless it's done properly in such a way that it works.
@silverbackmoose86426 жыл бұрын
I've got the same one, its BAd ass. levels the jeep out on and offroad like I never thought possible.
@ejayerik6 жыл бұрын
I’ve had the front kit on my TJ for seven years now. No issues. I opted not to put the stickers on.
@wvjeepguy81784 жыл бұрын
Mine came with the stickers preapplied.
@blurglide3 жыл бұрын
Why does this swaybar work better than the factory one? They look like they do the same thing
@dre04mach6 жыл бұрын
I wanna see a video of getting in and out of the jeep parked at those angles. I'm 36 going on 86 if you see me getting in and out when its parked like that... lol :D
@natebleepinjeep95646 жыл бұрын
The struggle is real LOL I'm definitely doing some Kung Fu/yoga moves to get in and out of this thing
@amantesdelfutbolusa2 ай бұрын
What are the benefits of installing it on the inside of the frame? And on the outside of the frame?
@Bodeesafa6 жыл бұрын
Great video as usual. I run the ORO swayloc front sway bar, which I feel is a better design than curries. Have you seen that one before?
@ttsupra25034 жыл бұрын
Any chance of a update on how you like the antirocks and how it affected your wheeling and on-road stability. Seems to be a happy medium between a factory sway bar and no sway bar.
@4WDTrek3 жыл бұрын
I will say, they work wonders. I love mine. Have about 2,000 miles on them so far. The comfort added when hitting small bumps on roads, like potholes is nice. Body roll is not very noticeable, especially after a day of driving. And off road it kind of "pushes" the wheel down and into a flex. Just about to post up a comparison video of it and you can really see the difference.
@301steady6 жыл бұрын
Been thinking about buying the cheapest JL and then upgrading to Currie Axles. Dana 70's or something.
@natebleepinjeep95646 жыл бұрын
I love the new JL, I got to drive a Rubicon at ejs this year. It seems like it might be the most refined jeep ever made! When they come out with the diesel version next year, my wife and I will be test driving some for sure
@jasonellis97305 жыл бұрын
I have the same set up and love it
@erikdahl31714 жыл бұрын
Nice installation video, is on my list for sure.
@nwbronco19726 жыл бұрын
Nice man, 311 trail, good video!
@natebleepinjeep95646 жыл бұрын
Thank you! Good eye, I've been running those trails at Evans for years
@nwbronco19726 жыл бұрын
Hope to see you up there one day!
@phemmeke6 жыл бұрын
LOL Nate. Surprised you didn't get the aluminum ones. Have the JKS quick disconnects, in fact. 2 pair because they shipped twice. If I can sell them I'll definitely go that route.
@natebleepinjeep95646 жыл бұрын
I would be interested in the aluminum version but I read some mixed reviews on them. I can't confirm this from experience but it seems like a lot of people are having issues with the splines wearing out on the aluminum arms. That's the only concern I would have
@phemmeke6 жыл бұрын
Thanks for the heads up!
@liketadied5 жыл бұрын
great vid! This sold me on the antirock!
@donfrea4 жыл бұрын
I don't own a wrangler yet but I plan on it by next year. I've been watching a lot of your videos to see should I go Rubicon or unlimited sport s. I plan on running 37" tires btw.
@4WDTrek3 жыл бұрын
If you plan on building something crazy and swapping out axles and all that as soon as you get it, save money and just go for a sport or Sahara. If you plan on running 37s and want to basically leave the axles alone, get the rubicon as they are the best right out of the box. Little more money up front, but you don't have to add on extra to get locking diffs and beefier axles later on to run 37s.
@ifp1233 жыл бұрын
As usual, another great video. Question: After installing my Rock-Jock Antirocks, the flex is now causing rear 37's to rub against the lower pinch seam area where my Smittybilt fender flares are located. This never happened when I had the JKS Quicker disconnects. I even added bump stops an inch taller than what I had with my AEV 4" lift. Thoughts and suggestions? I'm running stock control arms, 2018 JKU
@4WDTrek3 жыл бұрын
I noticed with them, it kind of forced a wheel to the ground more. Disconnects made it kinda float freely while the antirock kind of pushed it more to the ground, almost forcing the flex more if that makes sense. You can kind of see it in a couple of my videos. And especially in the one that will be posting up in a couple of days on my channel.
@doc5596 жыл бұрын
Nice video thanks for sharing 😊✌
@rayaboomboom6 жыл бұрын
You spoke about re-torquing after use. Can’t you use locktite? If not, why? Thanks Ray
@natebleepinjeep95646 жыл бұрын
You definitely could use locktite! But in my experience new bolts stretch so I like to retorque after a trip on new hardware.
@rayaboomboom6 жыл бұрын
Nate Bleepinjeep thanks Nate
@blakepharris95954 жыл бұрын
Did you happen to make an install vid for the rear antirock?
@4WDTrek3 жыл бұрын
I'll be doing a video of that here shortly
@StrainingDingelberry6 жыл бұрын
So how did it make it feel off-road. More stable? Did it make a significant difference?
@natebleepinjeep95646 жыл бұрын
Way more stable, the suspension is very soft so the Jeep likes to lean pretty good on Hills. This completely cured it
@jasoncassem23735 жыл бұрын
evans creek! love that place and great install vid!
@4WDTrek3 жыл бұрын
I do too! I'm sure it has changed in the past couple of years like the rest of the parks that I have filmed.
@SouthMainAuto6 жыл бұрын
Pretty cool Nate! What are your thoughts on it going down the road? Does the body roll in corners feel about the same as a conventional sway bar and link set up or does it have more "give"?
@natebleepinjeep95646 жыл бұрын
Unfortunately the laws are strict enough where I live I can't drive this on the street anymore. However I've had it on dirt roads at about 45 and it is surprisingly stable at those speeds. I won't be able to get it on the highway until Easter Jeep Safari next year but so far it's great. It's definitely not as stable as the factory sway bar but I'm very much in control at 45 mph
@onetruebob_tj6 жыл бұрын
It definitely has more give than factory. Will take you some time to adjust but then you are used to how it performs on the street. How much give and roll is also dependent on your other suspension components and to some degree your tires. Remember, you aren't driving a sports car, so you can't expect it to corner like one. 😉
@stephan50266 жыл бұрын
jrg10332 I agree. I went from a factory bar to the currie on the front and stock back and it’s junk. If I regret having spent all that money. Maybe good for trailer queen..
@SouthMainAuto6 жыл бұрын
Thanks for the replay Nate, the reason I ask is I am putting together a 6.5" IRO long arm kit on my WJ right now and upgraded the rear bar to an Addco 1" and used the JKS disconnects in the front. I want it to be stable on the road but also preform well off road. That is why I asked. Kind of a bummer you can't use it on the road any more....
@jthor83733 жыл бұрын
@@stephan5026 Wow!? It's really that bad!? Ok. Guess I may want to think on it again before I spend the money.
@ALEXPerez-bc7sj3 жыл бұрын
Nice looking jeep🤙
@jerrywhalen21003 жыл бұрын
As my daily driver little concerned with emergency Lane changes what is the body roll like with that
@Jeeptalkshow4 жыл бұрын
I know people are anti-mud but anti-rock? First time hearing about this! Do you think this is worth the $500 to $600 price tag over just disconnecting the factory sway bar?
@goodgreenmen21266 жыл бұрын
Just picked up swaybar links off ebay; def glad to see this vidy. #bleepnjeep
@modifiedgarage10066 жыл бұрын
4.5” lift on what size tires? 35s or 37s... the lift looks bigger
@natebleepinjeep95646 жыл бұрын
Four and a half inch lift springs with a 1 inch body lift. The TJ is on a 40 inch tall Tire
@Rick-45526 жыл бұрын
How does it do while driving it on the street?
@natebleepinjeep95646 жыл бұрын
Unfortunately I don't get to drive my Jeep on the street very often so I've only been able to experience it Off Road. The stability is night and day on dirt roads and trails! All the dirt roads that we hit to and from the trail are much less sketchy now that I have sway bars LOL.
@nsmturbo59024 жыл бұрын
Would there be any advantage to adding this on a leaf sprung rig, or would it be a waste of money?
@jkvinsland6 жыл бұрын
Have one installed on my XJ; it works great on and offroad and also negates the effects of unloading if you have radius arms. I don't miss disconnecting/reconnecting one bit. Set it and forget it. Looks like the 3-way obstacle on the 311 trail at Evans Creek?
@natebleepinjeep95646 жыл бұрын
Good eye! It was 311 at evans
@lucas__a11 ай бұрын
So there are the 5 pin holes, how do I know which one to put the bar in. I bought my jeep with one already installed and I don't know if I should move it or not. It is at the pin closest to the front of the jeep.
@bleepinjeep11 ай бұрын
The further in towards the swaybar the stiffer it will be.
@delinquentdesign6 жыл бұрын
How does the one work for the xj????
@bleepinjeep6 жыл бұрын
I have one on the scorpion, really settled it down!
I'm looking at replacing my front swaybar with their anti rock sway bar. The passenger side quick disconnect doesn't work, it doesn't clear the flipped draglink.
@4WDTrek3 жыл бұрын
I would highly recommend it. Now I have a JK but the concept is the same. I absolutely love it. My install and comparison video will be popping up in a couple days. I was shocked to see the difference it truly makes!
@donfrea4 жыл бұрын
Oh and what's the brand and model of that electric wrench you have there? What's the drive size on that bad boy?
@humbertorobles96383 жыл бұрын
How long are your brake lines? I’m not sure if I’d have to replace them if I do decide to get this sway bar
@IMPORT3DKILL3R6 жыл бұрын
Nate I meant to ask you what transmission you're running. How do you feel it does behind the VW diesel
@natebleepinjeep95646 жыл бұрын
I have the nv3550 and so far it's doing really well. I was worried about the extreme low end torque vs this clutch and tranny but everything's holding together great so far! I plan on turning up the engine quite a bit in a future video so we'll see how the transmission does when the torque gets closer to 400 instead of 300 LOL
@MrNirsky3 жыл бұрын
How did you install the rear on TJ? Is it as easy as front?
@munghini5 жыл бұрын
where was this test ride at??
@jamierose4173 Жыл бұрын
Hey guys, Im buying a used JKU with the currie: its a rubicon, and im not sure i prefer the currie to being able to Electronically disconnect... How is the removal of this system to go back to stock Rubicon Elec Disconnect? any tips? thanks
@bleepinjeep Жыл бұрын
dont bother. The anti-rock is a much better system for people who actually offroad. The Electric Disconnect will fail.
@thecatfelix29886 жыл бұрын
Excuse my ignorance. .With that front sway bar you don't have to disconnect before you crawl? i though all sway bars have to be disconnected. I though sway bars was meant to be use for the street.? Somebody 😕
@natebleepinjeep95646 жыл бұрын
These sway bars are designed for use on and off road meaning the bar itself has a really small amount of twisting force. It's just barely enough to keep it stable at high speeds and soft enough not to inhibit Flex Offroad. I've been out on the trails twice since installing this and it's pretty incredible how much Flex it still has Offroad. If I could post a pic on KZfaq comments I would show you because I too was pretty skeptical before I bought one
@thecatfelix29886 жыл бұрын
+Nate Bleepinjeep . Thanks for the info. That's a new one for me. Awesome. Do they make for a full size chevy pickup truck ? maybe
@onetruebob_tj6 жыл бұрын
jrg10332 Not everyone thinks it's junk. Speak for yourself.
@timdelariva16056 жыл бұрын
What springs are those ?? MCloak?
@natebleepinjeep95646 жыл бұрын
Yep! 4.5"lift metal cloak
@paulcasper89966 жыл бұрын
What kind of bump stops are you using? I have the same lift on my tj and having trouble figuring out what bump stops I need. What axle are you running to be able to have 40 in tires?
@bleepinjeep6 жыл бұрын
check out the walkaround video on this build!
@Mr.Beastforpresident6 жыл бұрын
Everything done to your Jeep that was ( bought ) Is all of it your Website?
@bleepinjeep6 жыл бұрын
we sell t-shirts and stickers and a few of our own tools and items but thats it for now.
@jarrad43976 жыл бұрын
Your test area looks like Evans Creek.
@macsogandares83836 жыл бұрын
Is that electric ratchet any good?
@natebleepinjeep95646 жыл бұрын
I love it! I use it on almost every build. Little tools like this can really speed up a project!
@macsogandares83836 жыл бұрын
Good to know. I have an air ratchet, any idea if a VIAIR compressor would be able to power it? I'm gonna guess that's a no, but in either case I'm gonna look into buying one of these.
@natebleepinjeep95646 жыл бұрын
@@macsogandares8383 some air ratchets actually use a TON of air. You would probably need to run one or two pretty decent size tanks on board if you are going to make it work with a viair compressor. Viair makes some killer compressors but a air ratchet is a lot of demand for a 12volt air
@macsogandares83836 жыл бұрын
Its an older Mac. I've used it on a 2 gallon tank (harbor freight) and it drains it in no time. The Viair compressor would do better but probably not good enough.
@oxulucozcan49236 жыл бұрын
WTG Nate! Thanks 🙏🏼
@rogercox82284 жыл бұрын
It is possible to easily disconnect front and rear? Or meant to always be in place. Going 14” coilovers so don’t want to limit my travel to much
@bleepinjeep4 жыл бұрын
they flex when needed, no need to disconnect.
@rogercox82284 жыл бұрын
BleepinJeep gotcha- I like the OTo swayloc, may try to find a way to rig that up in my Yj
@delinquentdesign6 жыл бұрын
I never understood that stupid thing what does it do that stiffer springs won’t do offroad. Don’t get me wrong I’m pretty sure it’s a huge upgrade for on road but that’s it. I’d rather off-road unlinked. At first I thought this was like the hub disconnect type skyjacker sells which I think that is a better setup.
@jefflemon54976 жыл бұрын
delinquentdesign you lose articulation by having stiffer springs, and you get a worse ride. you dont lose hardly any articulation with this setup
@natebleepinjeep95646 жыл бұрын
I understand your skepticism! It took me 14 years to buy one of these things LOL. The out-of-the-box suspension kits were too stiff for me so I got really soft dual rate coilovers. This made the ride much more comfortable at high speeds but I lost a lot of stability overall. When I saw how big of a difference a rear sway bar made I had to check out what it would be like to run it in the front as well. The stability on Xtreme inclines is unbelievable... Seriously dude, if you Road in something like this I bet it would change your mind like it did mine. There is a reason why every vehicle at King of the Hammers runs of these things. You get improve stability no matter what the speed!
@delinquentdesign6 жыл бұрын
Sounds convincing Nate. Now you got to show how to mount one on an xj. 👍
@MrMrsregor6 жыл бұрын
yes, almost too convincing... $600 is too much for me, but they do have a bolt-on kit made for the *XJ* on their website; www.currieenterprises.com/ce-9900xjf
@onetruebob_tj6 жыл бұрын
Its a huge difference between what you get with just disconnecting the front sway bar. I was also very skeptical until I rode in several TJ's that had them. Definitely made me a believer. Coupled with the fact that you don't ever have to worry about disconnecting makes it a great investment.
@slappygilmore50404 жыл бұрын
i have a 4" lift with 35s, would u center the sway bar like u did when installing? or should i match the angle of my old sway bar?
@4WDTrek3 жыл бұрын
I did mine just about parallel to the ground and found it to be just about right. Per instructions it does say for it to be about the same parallel.
@moejr14 Жыл бұрын
Hello? Is there anybody in this comment area that has an anti-rock on there jeep XJ? Could you please give me some advice as to how I am supposed to properly adjust the end?
@bleepinjeep Жыл бұрын
bring it in towards the center and it gets stiffer, out towards the end it gets looser.
@moejr14 Жыл бұрын
@@bleepinjeep I’m talking about the end link adjustment for up, travel, and down travel
@hhyperdd3 жыл бұрын
Out-F’ING-standing vid.
@TheAmericanUhate6 жыл бұрын
Surprised that there isn't any of the XJ community in here talking shit about running sway bars lol. Man they hate sway bars in every XJ group I'm in lol.
@natebleepinjeep95646 жыл бұрын
To be honest I was one of those people too. I never hated sway bars but when the Jeep had an out of the box lift, things were stable enough. Once I did dual rate coilovers and really soft front shocks it was obvious that I needed to do something. The body roll was pretty bad LOL scares the crap out of my wife! Now it handles as it should while still maintaining and extremely soft ride. There's a reason almost every competitor at King of the Hammers has sway bars!
@MrMrsregor6 жыл бұрын
i still hate sway bars only because i can not bring my self to spend $600 on these sweet suckers
@777VAZ5 жыл бұрын
Where is the video when you install the rear sway bar
@4WDTrek3 жыл бұрын
I'll be doing a video of just that here shortly!
@David-rj1ru6 жыл бұрын
can you get this sway bar for the XJ?
@bleepinjeep6 жыл бұрын
Yes
@David-rj1ru6 жыл бұрын
@@bleepinjeep woooohoooooooooeeeeee son.
@bdfister6 жыл бұрын
The antirock will still make the Jeep ride worse on the street, as it is just a softer sway bar, but it is still worth it imo for the extra stability off road.
@RaneyOneTwenty6 жыл бұрын
The ride isn't any different on the street than with the stock sway bar if anything they ride a little better. You may get more body roll though depending how you set it up.
@onetruebob_tj6 жыл бұрын
I wouldn't necessarily say worse, but it does take some getting used to. Also depends on your tires, control arms and what springs you are running. I actually like the ride better than stock.
@Daniel-yb7wj6 жыл бұрын
Stick your bushings in the freezer over night and theyll pop into place with no effort or tools
@onetruebob_tj6 жыл бұрын
Nail Face now you tell me! 🤣😂
@rodneysrepurposingrecyclin38216 жыл бұрын
Physics is great isn't it
@SuperSilence235 жыл бұрын
Beep beep jeep
@promotionaltoaster4 ай бұрын
I understand how they work but they still just seem like black magic to me. Everything in me screams that they would upset the vehicle by not allowing one wheel to droop independently of the other. I know they are torsion bars but it just leaves me stuttering on the effectiveness of it.
@brentorebaugh94016 жыл бұрын
Does Nate realize that he says and the closed caption even says tj but he is clearly working on a jk? Just figured the guys on tv should know what they are talking about before I listen to install procedures and its not even my style of jeep.
@natebleepinjeep95646 жыл бұрын
Are you trolling me dude? Or do you really think my 2002 TJ is a JK? LOL
@FaithinThoth6 жыл бұрын
For 500 dollars if rather get out and disconnect my sway bar.
@endurotruckererniedesjardins6 жыл бұрын
I dont run sway bars. If you drive a jeep like its a jeep not a friggin race car...... you really dont need a sway bar. Why is it that all the yuppie jeepers think you gotta drive jeeps so dam fast and reckless... slow motion and big tires is the way to be cool in a jeep.
@rhymeswithshmalex4 жыл бұрын
Unrelated to the sway bar.... what genders do you have on there? That’s the look I’m going for on mine! Great video though, it was nice to actually see it in use. Edit 1: 🤦♂️... fenders, not genders.
@erikng10034 жыл бұрын
This thing is a waste of money , sold my for 2/3 of the price after 3 months , on road is horrible , and I never did any extreme rock crawling to get the full benefit .
@4WDTrek3 жыл бұрын
What was horrible about it? I found that on road was only slightly more body roll than stock. But felt more comfortable in general. And I don't do hard core rock crawling and still find more of a benefit to it. Even have a comparison posting of a basic rutted out section of a trail to show the differences