Why do I like this channel? Sarah stays humble about her accomplishments. Rather watch you build restore $2k cars then build brand new M3's
@wurlyone46853 жыл бұрын
That ^^^^
@MarkTrades__3 жыл бұрын
So much more relatable & real
@mostcom3 жыл бұрын
cuz the gods commanded it and we don't want to piss of any petulant childish deities.
@davidperry72713 жыл бұрын
Yes to many high end cars being rebuilt by no experience kids
@s.f.63933 жыл бұрын
Aww Jack. So sweet.
@josephbasanta3 жыл бұрын
Sarah, when drilling use cutting oil, it will keep the heat down and your drill bits will last longer. Tap Magic XP-xtra or Anchor Lube, both on the thick side so unlike WD-40 (not a cutting oil) you will not have to keep applying while drilling.
@SarahnTuned3 жыл бұрын
I never use cutting oil, I always felt it took twice as long with it and have a habit of just throwing bits out to save time lol.
@drulessman28923 жыл бұрын
The oil helps cool the tool a dull tool takes longer to cut .. I propose next time ya lube it up for you tube.. nice to see you focused today!.. wow what a week for reviews .. you have a dream garage this week
@Rob_Huskett3 жыл бұрын
You can always dip the drill in a bit of water to quench it after every 2 or 3 spot welds. My spotweld drill has lasted for 4 cars already and is still sharp
@Kevin-nl2so3 жыл бұрын
Hopefully you see this cuz im posting under replies. Throw those spot weld bits away and pick up a pneumatic or electric belt sander. I do body work for a living, goin on 20 years now. It is ten times faster to grind the spot welds vs drilling them. 60 grit belts work best. 1/2” x 18” I have Onyx and Astro ones. Around $100 for the pneumatic kind. This will be a game changer trust me.
@frogswurld3 жыл бұрын
As a machinist I can't agree more about the importance of cutting oil.
@jormassi3 жыл бұрын
I like the fact that all the cars no matter of their value are getting equal love from Sarah
@ross76843 жыл бұрын
I think doing the engine work on the Xterra might have been easier than doing the roof work on the Focus! Lol! Thank you for another entertaining video, Sarah.
@SarahnTuned3 жыл бұрын
I grew tired of working on the same thing and seeing my cars just sit constantly.
@bongodave133 жыл бұрын
Been waiting to see this. I want to see you rally it. Go, Sarah!
@realwheelman3 жыл бұрын
Great stuff Sarah. I love your sense of humor, always a joy .
@JimmyMakingitwork3 жыл бұрын
Other channels destroy expensive cars and laugh about it without a care in the world. (appealing to the lowest common denominator?) Sarah improves cars for herself, friends and family. Much better. Thank you for that!
@SarahnTuned3 жыл бұрын
I could never do that, I feel like that money could be better spent. Like go buy a hard working broke college student a new car and surprise them instead, you know?
@JimmyMakingitwork3 жыл бұрын
@@SarahnTuned Exactly why I enjoy your channel and watching your projects! Keep up the great work!
@richb22293 жыл бұрын
I watch some of those channels too. They seem never to finish things correctly then take the vehicles out and destroy them. No real point other than breaking thousands of dollars worth of parts and labor.
@rockyloccgarage20403 жыл бұрын
There's my two personalities driving vs. Fixing my own car the same way
@akaydogan3 жыл бұрын
You and that NSX were made for each other. I've said it before, we just need keep watching, subscribing, and getting those numbers, and soon you will be driving one off the lot as an owner and not just reviewer. Great job coming up with different approaches to getting the winshield out. Also, talking about the structural rigidity of the car oncethe roof is removed is something that most hackers wouldn't even consider until after car is skewed.
@SarahnTuned3 жыл бұрын
Yeah right, lol. Wishful thinking!
@mostcom3 жыл бұрын
@@SarahnTuned did you see Faye's Supra?
@Ryan_hall3 жыл бұрын
I was actually kind of looking forward to the rear main project but after seeing that I don’t blame you for farming it that looks like a huge job just taking everything out
@SarahnTuned3 жыл бұрын
They had it all apart in like an hour lol
@mindtraveller1003 жыл бұрын
Sarah, you´re finally reaching the success you deserve. I still remember, not so long ago, of you sadly saying "they won´t give me the Type R to review, i´m not a big enough channel", and now, you´re reviewing the NSX! You´re even outsourcing jobs to smaller youtube channels... Oh, did i say "smaller youtube channels"? I meant friends... lol Congratulations, and keep it up.
@westcoastturbos3 жыл бұрын
One of my favorite KZfaq channels.
@IDEALRC3 жыл бұрын
most glass shop will come remove the front window for a few bucks , that's the easy way
@SarahnTuned3 жыл бұрын
Yeah, I called one the second I uploaded this! You’re 100% correct
@thewrench3243 жыл бұрын
Hahaha 🤣 A+ effort lol
@bubbaborsci71233 жыл бұрын
What a wonderful setup you have now with the new shop, friends next door to help, first class car reviews, great teaching experience and entertainment, your jokes are still fire.
@ItsProbablyFine3 жыл бұрын
The addition of Jeff the Dog to this channel may be the greatest cast member addition in television history. This is even better than Frank joining Always Sunny or Gus joining Breaking Bad.
@fletcherchad94343 жыл бұрын
What? Adding Sarah's sister was the best addition. So funny to see camera shy people on camera.
@BarbWaltersMusic3 жыл бұрын
When lots of other channels end up hiring help or have tons of people to wrench on shit you gotta give Sarah props for always busting her ass for the channel. It's starting to pay off! EDIT: LMAO at Sarah asking the homies next door to do the shit work lol
@sasha-taylor3 жыл бұрын
your channel reminds me a ton of Taylor Ray. You're both down to earth, do everything yourselves, obsess over the details, focus on the wrenching content, just got your own shops, you both have a bunch of awesome builds, and you're my two favorite KZfaq creators!
@SarahnTuned3 жыл бұрын
I watch his channel also, I appreciate his work ethics.
@drulessman28923 жыл бұрын
Both are some of my faves too I dont miss the uploads
@sasha-taylor3 жыл бұрын
@@SarahnTuned his k24 cefiro and ls miata builds (along with a few others and my own goals of course) inspired my plan to put a turbo k24a2 Honda engine into a miata as my dedicated drift car
@scottycollins1313 жыл бұрын
Oh brother.
@ryanjames29623 жыл бұрын
That tool is called a “centre punch”... the most simple style is a point at one end and a flat that is hit with a hammer on the other.
@fishnchips78233 жыл бұрын
The channel of innuendos! Totally adds to the excellent content!
@ezlikesundae683 жыл бұрын
2:10 . No. The XTerra has been my favorite build. Looking forward to seeing more. - Penguin
@LD-bv1pm3 жыл бұрын
I'm thinking of getting an NSX so looking forward to your quirky review pointing out stuff I'd never notice :)
@SarahnTuned3 жыл бұрын
If I could afford one, this would be the ONLY supercar I’d ever even remotely consider owning.
@LD-bv1pm3 жыл бұрын
@@SarahnTuned that's great to know, thanks Sarah. I'm coming from a Mclaren 570S but frankly the thought of the ticking maintenance time bomb terrified me every drive!
@SarahnTuned3 жыл бұрын
@@LD-bv1pm I like the NSX because it feels like you could put 200k+ miles on it.
@Primus543 жыл бұрын
Great of you to keep Celine’s Xterra going while doing what you love and providing variety for your subscribers. That paint on the Acura might be my absolute favorite red of all time! Cannot wait for your review. Congratulations... you keep on moving up in the car review world... much deserved. 👍
@danielperkins46103 жыл бұрын
Who needs a gym when you can take off a windshield! I’m glad baby Jeff the warlock made an appearance!
@SarahnTuned3 жыл бұрын
Hahaha, the warlock!
@mikef936703 жыл бұрын
Windscreens are easy, if you have the right tools
@kennethhess54573 жыл бұрын
Young lady I never get tired of watching you do your car thing you're awesome
@T0mThompson3 жыл бұрын
The way you are pushing every car to the absolut perfect i think especially the MR2 has increasing its value by a lot. Your channel and your attitude is me showing...of you grind your a*s of...you are going to reach your goals. Thanks for motivating me Sarah :)
@immortalfool76273 жыл бұрын
I used to remove windshields. You had the right idea. They use a very strong string line to cut through the glue.
@toolshed76523 жыл бұрын
I always love the sound of the power tools when the video is sped up :D
@bigfilsing3 жыл бұрын
Round wound guitar string ( E ,A or D ) to "saw" thru the glass glue Rock n roll . Take my hat off to ya. The roof replacement looks a bugger of a job
@mostcom3 жыл бұрын
Ernie Ball super slinky
@nullrout5563 жыл бұрын
I'd like to think that baby wolf spider will go on to raise little ones of its own in your shop and pass on the legend of the nice lady who was a benevolent and let him/her live. Those spiders will be protecting your shop for generations to come. You will become a deity to their whole branch. They sing hymns about you that include penguins and such.
@brianmurphy87903 жыл бұрын
Nichrome resistance wire, two wooden handles and 12v battery - that screen would have been out in a few minutes. (unbroken).... I love watching you struggle, such wonderful entertainment....
@staleyexplores3 жыл бұрын
Those wheels on the forester are pretty sweet
@MrBikebros3 жыл бұрын
I'm proud of my cabinet! I so luv your style, please don't change
@MrMan_473 жыл бұрын
Guitar string on the windshield!
@Garbox803 жыл бұрын
Or a piano string/wire/whatever. Solid wire anyway. Would help if you could get it hot too, but of course that wont do when using hands.
@stevekirby73333 жыл бұрын
@@Garbox80 You wind each end around needle nose pliers and use them as handles.
@mikemensinger57633 жыл бұрын
I think windshield replacement folks use a heater to melt the glue first. 🤷🏼♂️
@curtishunterii70253 жыл бұрын
Every garage needs a cabinet...
@BdeSimon3 жыл бұрын
Facts!
@sharkeyist3 жыл бұрын
Pro tip, When your stuck for spotweld bits, Irwin turbomax drill bits have a flatter end than a normal bit, and with the set you can use the size to match the spot.
@danieledwards10813 жыл бұрын
There's a handy little tool you can get for cutting out glued in windscreens, has a nice solid handle so you can control it, a cable attached near the base to get extra pulling power on it and a strong little blade with a 90° bend in it. You work the blade in, twist it perpendicular to the glue joint then pull on it hard, it slices through beautifully so then you can just lift the window out, easy as 👌👍
@GhostRyderFPV3 жыл бұрын
Cabinet action - spicy!
@SarahnTuned3 жыл бұрын
Heck yeah! Spicy 🌶 lol
@infinitexsound60873 жыл бұрын
Welding wire and 2 screwdrivers... make a cut with a utility knife into the urethane at the top corner. And wedge the wire thru start sawing....
@PetrolJunkie3 жыл бұрын
They actually make a specific wire for sawing. It's not twisted the way the wire is for load-bearing applications, but to be course even as it wears. I buy it by the spool to cut PVC and conduit I can't get anything else to fit in around it. Works really well.
@EVERYDAYLAWNCARE3 жыл бұрын
The little tool that you used is what we use in the fire/ems world for breaking glass for rescue. It’s like a $5 tool
@tomtaraselena3 жыл бұрын
My girlfriend got me in to your channel much love for the cars u work on and show off and a shout out to my girl kerri robblee
@romans8forging1813 жыл бұрын
You can use a little bit of oil when drilling metal to keep the bit from over heating. Also use a lower speed
@harrycordell77693 жыл бұрын
I really like the way your organizing your shop.beautiful.
@jshrawder493 жыл бұрын
I’m am fine with whatever you put up!! It’s about the journey not the destination!!
@kennethlim77933 жыл бұрын
I believe the springy tool you were using to mark drill points is one type of center punch. I've used automatic-push-pen style center punches before.
@tonygiraldes78483 жыл бұрын
The hardest working content creator on KZfaq 👍🙏
@jeffheyman85373 жыл бұрын
Heat and a windshield remover tool used to take windshields out of our demolition derby cars .
@leeswift78833 жыл бұрын
TRX and NSX, can't wait
@senatorchinchilla53893 жыл бұрын
Some day I want a huge metal cabinet like that for all my rock auto magnets. There are more than I care to admit.
@tattooedsailor86663 жыл бұрын
That red Acura NSX is totally bad ass! What a gorgeous car!
@markopolo95593 жыл бұрын
Whoop whoop, for the new cabinet Sarah!
@stephanieatronach44593 жыл бұрын
Early on a Sarah vid yay! Just in time when I was looking for something to watch.
@richmcdowell3 жыл бұрын
You're moving up, Sarah. Gotta let it sink in. I'm hating you right now for that NSX and TRX lol. I'm trying to remember how the early TTs were designed and if the front subframe has to be removed to pull the transaxle. Let that NSX and TRX remind ya: you've come a LONG way. Nowhere to go but UP.
@KermitGTT3 жыл бұрын
For future reference to remove a windshield, stick piano wire through the sealer top and bottom in the middle. Then simply use it as a saw with both handles on the outside. Much easier for one person to remove the glass this way. Shouldn't take more than 5 minutes to have the screen on a scrap pile. It will also work if you want to remove it without damage, but you need to take out the molding around the screen fist.
@cucina573 жыл бұрын
They make and sell that same type of cable saw at plumbing supply stores to cut PVC pipe in close quarters, and yes they do the same thing yours did after about three uses.
@patricelemay11903 жыл бұрын
Oooh that NSX is 🔥 , it's been my dream car from the first edition and they’re just getting better , like them better than any Ferrari or Lambo, more reliable and user friendly , anyways it's just my taste ! 🤗 oh and before l forget your editing is faboulous ! 👍👍👍
@patricelemay11903 жыл бұрын
Sorry l meant " fabulous " ! 👍
@amoni19593 жыл бұрын
Grats on ur new shop. Looking forward to more forester stuff. 👍🏾
@fletcherchad94343 жыл бұрын
Pro tip for windshield removal. Get a guitar string a block of wood and a soldiering gun. Force sting through the glue on one end wrap string around wood block and other end of string around hot part of soldiering iron. Press button and pull gun and block evenly. It'll go through it like a hot knife through butter.
@evilmelon87903 жыл бұрын
Thank you. The Focus is my biggest curiosity.
@Elmer_RedEagle3 жыл бұрын
That tool looks exactly like a Lee Valley spring punch I use on finishing nails that are sticking out a tad.
@DrayneR13 жыл бұрын
For windshields, I usually use piano or bass strings to cut the glue, it works like a charm ! Just pass it through the glue, and then I use a wooden stick to wrap the string around and have a better grip :)
@jeeper4263 жыл бұрын
i have one of those auto punches, i use it for marking drill holes as well as knocking pins out of door hinges, i found it on Ebay just searching for "spring loaded auto punch", and for windshield glue, i've used a heat gun in the past to soften the glue enough to run a piece of music wire through it, great project and it'll be interesting to see how the sunroof delete turns out, i've never seen this done myself so i'm curious to see where it goes
@trapperted50833 жыл бұрын
you can also use the top E string from a guitar to cut the glue into also but it takes two people one inside and out to cut it out goes surprisingly fast
@rf38993 жыл бұрын
I'm new to your channel and have been binge watching your videos. You have quickly become my favorite KZfaq channel.
@ldnwholesale85523 жыл бұрын
Piano wire. I have watched the pros take them out in a few minutes without even breaking them
@mpstein19763 жыл бұрын
Yup
@ever2gut13 жыл бұрын
I've used a similar wire but its a dedicated product and yeah you just need two people and to protect some paper plates. Gravy.
@meshal40483 жыл бұрын
Finally you got to review an exotic car not a people’s car...you’ve earned this major upgrade as a definitive result of your hard work and always evolving contents...keep up Sarah...best luck
@oldblueshhrchannel18473 жыл бұрын
Progress for the Focus! Nice new cabinet for the shop. Pulling a modern bonded windshield is a messy PITA , and not the tasty kind! Can’t wait for your review of that car, I didn’t catch what it is, but I like it!
@oldretireddude3 жыл бұрын
On the windshield removal: Put some dowel rod or pipe through your cable loops as handles.
@r0llinguphill4833 жыл бұрын
This is why you can have nice things!
@troypalmer50653 жыл бұрын
I know it's late and I'm sure you looked it up already but you can go to the auto parts store and get a cable specifically for removing windshields which you might need for future projects.
@carlsummers61053 жыл бұрын
Hello Sarah. How are you? I stumbled across one of your videos a couple weeks ago and I have been obsessed watching you since. Your reviews are much more interesting than most. Seeing you biting your lower lip so often is a nice touch. Your project cars are a pleasure to watch. You became my favorite KZfaq channel to watch. Stay safe.
@juandasilva92263 жыл бұрын
Why more than the middle car was gone?? Hahahahaha The Quatro need love.... Muuch loveeee. When you think that "Oh yeah, ufff, that is very easy, in one hour finish this. HAAA! Two weeks later and still in that.
@chilcootsam3 жыл бұрын
Saw the windscreen out with piano wire. Or in a pinch, guitar strings, or a hood release Cable from a wrecking yard.
@virtualyme76593 жыл бұрын
They do make cable saws my dear. Glad to see you prosperous 😊 I hope to see the MR2 soon ☮️💜
@SarahnTuned3 жыл бұрын
My schedule doesn’t allow for me to go buy/order something every time I need it. 72 hours.. that’s all I have to get a video done before it’s time to upload again.
@patricelemay11903 жыл бұрын
Cool cabinet , now you'll be able to put a butt load of stickers on it for decoration...noice! 😎🤙
@6RAW63 жыл бұрын
I love that NSX, so want one!!! Can't wait!!!
@kevinwiltshire22173 жыл бұрын
I'm impressed you wore out a spot weld cutter I've broken the teeth but never worn one out
@malibuman89413 жыл бұрын
Nice cabinet. Glass guys can remove a windshield in 10 minutes with special tools without damage.
@simon24283 жыл бұрын
Check out Poly Strip Discs, fit in an angle grinder 👍🏽 strip paint etc without damaging the metal.
@HP-mx6jb3 жыл бұрын
Jeff was marking his favorite project car.
@eefneleman95643 жыл бұрын
I think his shirt should say 'I wrench' . For windows, we use a square wire nowadays, pulls right through. Insert through the top seam, exit through the bottom (yes, you need a long wire) and you cut through one half of the windshield bond at once. Also I've seen pro's use a very simple looking razor sharp cutting tool they just pull through by hand. Remember, that windshield (and others) are a structural part of the car. They help retain the shape of a car in a crash and have to remain in place when airbags go off. Not like the old days when windshields were fitted in a rubber seal or with butyl tape.
@jimkaray3 жыл бұрын
I was taught that the windshield is now considered a structural component since the advent of installing them with urethane adhesive.
@Newhaulin3 жыл бұрын
It's a spring punch. I bought mine from matco. It was an assortment of 4 for $20. Great tools to have.
@paultaylor96523 жыл бұрын
Working hard girl, keep them coming.
@beachBUMver1point53 жыл бұрын
Cool vid! 🍿 Entertaining & educational. The NSX is built in mid Ohio, I got chance see those rip down track while I was learning the course. That chassis on that car is something else.
@rhark253 жыл бұрын
I hope whoever invented the spring-loaded center punch is rich. They deserve it!
@moegeek3 жыл бұрын
Xterra is one step closer to Pebble Beach! :)
@mostcom3 жыл бұрын
Concours condition no less
@keydiver13 жыл бұрын
Thanks alot ... you've got me out there on the Bronco again. I even gave it a silly name. I'm gonna go broke.
@Penguins2473 жыл бұрын
I love the fact that you always try to improve things and make them better :D I also liked the percussion sounds, very Art Of Noise.
@destintosell55483 жыл бұрын
For the future a heat gun will loosen the adhesive around windshields making them easier to saw with the cable.
@brad43543 жыл бұрын
Go to a windshield shop, they will sale, you the tools you need. Just like the wire saw, you are using. I used a heat gun, to soften the binding agent. It makes life a hole lot easier
@rodmackinnon84973 жыл бұрын
Love following your success . . . happy for you. Cheers.
@WokWithEddie3 жыл бұрын
The NSX is gona be EPIC! !!!
@jamesharris93523 жыл бұрын
My experience, body molding or trim that has been glued on... Comes off,... much easier with a little heat... (Hair Dryer or Heat Gun Set On Low...) Blessings: James... 🌈 Nice to see a lady wrenching for a change! 😉👍
@bdk3233 жыл бұрын
Cool content is all that matters to me working on Terra is fine!!!
@bradwedge82763 жыл бұрын
That Acura is beautiful!
@victoreroyale60683 жыл бұрын
You are amazing,that looked like a great workout
@jaysmith50843 жыл бұрын
The thing is called an automatic center punch and you can find them anywhere they sell tools including Harbor freight .
@reymondlopez74683 жыл бұрын
Thinks to myself “damn, Sarah looks totally hot in that sweater” Sarah: “I’m dressed like an idiot.” 😂🤣
@criticalevent3 жыл бұрын
"Also Imma ruin this sweater."
@thomasschaefer93123 жыл бұрын
can't wait to see the NSX review.
@manuelg80503 жыл бұрын
That Red on the Acura NSX (? is that right? We don't have that brand here) looks really delicious!