CYma Platininum MP5K Worth It?

Рет қаралды 23,325

Negative Airsoft

Жыл бұрын

I changed two parts, it is what it is...
Not the quietest nor the best thought out, but worth it?

Пікірлер: 68

@Pixelponny Жыл бұрын

That anti-reversal latch clip must be a god-send

@ArchieKeen1 Жыл бұрын

Could also just use some tweezers though the motor hole

@tylasmith5994 Жыл бұрын

So cheap to get, every person teching should have one

@flippyjunior1267 Жыл бұрын

shut up and take my money

@TheAde71 Жыл бұрын

I got mine off ebay

@bugsstomper7984 Жыл бұрын

what's the name of that thing and where can be found? Thanks

@deenv1 Жыл бұрын

dude I found your channel and I'm so glad I did. Makes me more relieved to work on my guns and I'm planning to do some teching for the bois in my airsoft club make some buck

@urdead2meboy Жыл бұрын

i was looking at mp5s now i need to have a think love the videos luke !

@danielk9906 Жыл бұрын

What you said about aesthetics is so true, i would add that you have 3 stock option: sidefolder, no stock, and the 3 point sling method from the SAS boys being innovative

@krinkovforever1872 Жыл бұрын

I’m pretty sure it was GSG9 that came up with the three-point push out method

Жыл бұрын

When I disassembled mine it didn't have any foam or tape around the MOSFET. I guess that one was already manipulated by someone. Also, I used an SHS 22,34mm nozzle for a SIG, and FPS went up very noticeably without any feeding problems.

@johnsamonas7104 7 ай бұрын

Thanks u saved my mp5 I took your advice worked perfectly,ps your vid’s are great ,love your humor!!!!!!F the haters!!!!!

@NegativeAirsoftTech 7 ай бұрын

kisses

@arvo_septus Жыл бұрын

I really like the top rail on that. I think it looks pretty cool. But I do agree that the stock isn't right.

@cMONoutdoors Жыл бұрын

for about $190 USD its a absolute great deal ,unlike the Elite Force that costs way more

@setsuna200 Жыл бұрын

The m5sd and limited edition are both cyma.

@WazheadBoci Жыл бұрын

I own a 041.G and I like it a lot :) And the one hand paddle is rly awesome just a little bit of practice and your reloads will be smooth as butter.

@Thitnn Жыл бұрын

I have the 041G too, replaced the PDW stock with a full MP5A2 stock, took the mag release paddle off literally the day I got it, and replaced the top rail with one of the short ones. 2 ways to go about it haha.

@WazheadBoci Жыл бұрын

@@Thitnn yea personal preference ,)

@RandomNoisyBoy 10 ай бұрын

@@Thitnn how did you get a full stock on the mp5k from a mp5? attachment point isnt the same

@zack8690 Жыл бұрын

Well. I purchased 2 of these. Wish I waited to see this lol. Not bad but I’m surprised cyma cut some corners. What size tap for the mounting hole Luke?

@Gap_Poughkeepsie Жыл бұрын

Good reviews

@deenv1 Жыл бұрын

can you test your guns for range and accuracy if you have the means to do so? it will be a great way to support what you're saying

@tonyrose2692 Жыл бұрын

You saved me from buying a pile of it. Thanks

@n8taing612 Жыл бұрын

Cyma has a normal mp5k without the mlok and pdw stock as well no MOSFET, I believe it's under their blue line

@themaniac5864 Жыл бұрын

The Bevel gear teeth broke fast One year later on my MP5, the 41H. And 6months in, the original mosfet shorted

@MercutioUK2006 Жыл бұрын

Ooo.....ideas........and as I have an MP5k....... *moistness intensifies*

@afkafkafk Жыл бұрын

What batteries do you recommend for this one, I got the same model but it doesn't cycle on auto with low C batteries. Just not sure what to get that fits

@Trzebiat Жыл бұрын

That PDW stock is ugly as hell and you can't even collapse it very much to make the gun shorter because of how long that buffer tube is. I put B&T style stock on it, lots of fitting but worth it. Btw, what nozzle would you recommend for it? I'm upgrading mine, mainly just Warhead motor, Aster V3 and cylinder, but I've been wondering if it's worth it to change the nozzle while I'm at it.

@obscuragraffitica Жыл бұрын

I have the B&T stock on mine as well. A lot of machining but damn, the gun looks proper.

@Noise-fe6dp Жыл бұрын

Any tips on a good mp5 hop unit? They all seem kinda flimsy and some move if you run too much.

@setsuna200 Жыл бұрын

Why not go tracer/supressor combo? Because if the inner barrel is not too long, it could be done.

@tobyc8905 3 ай бұрын

Would you recommend this gun then? Or have another recommendation?

@seanmccann1691 Жыл бұрын

I just put a perun in my umarex mp5k pretty sure it's a cyma gearbox but it does have the screw for the mosfet.i had to do alot of mods to fit zci internal bearing gears and that flat trigger didn't fit had to shave it down and the selector plate piece was a pain had to shave left from your location about 7mm to get it in full auto. Still full auto bursts around 3 or 4 shots and completely shuts off 🤔 any idea 💡 why it's doing this? I can't figure it out just completely lost right now.

@secondaccount8072 Жыл бұрын

Have you seen ics mars 2 is it worth it, or are there better options?

@error262 Жыл бұрын

That's not sponge or hot glue. That's thermal glue, they use it to transfer the heat from the fets to the gb shell.

@Hornsvinet 6 ай бұрын

I just got this one, but how on earth do you fill that mag? (I am new to airsoft)

@rdb9936 Жыл бұрын

What is the best MP5k out the box?

@cunnyfred9562 Жыл бұрын

That Cyma platinum comes with a spare spring. You could easily increase the fps by changing the spring, since this is a quick spring change system., instead of changing the cylinder and/or the barrel. Also, do you have extensive knowledge of the CYMA HIGH SPEED SERIES?

@kord2003 Жыл бұрын

Changing the spring won't increase FPS that much. The nozzle is too short, you need at least 1 millimeter longer nozzle for better sealing.

@TraceurSoul Жыл бұрын

Yeah, not really. Tried that on a platinum MP5. It only does around ~1.1j with a Guarder M110 spring when that should take it up to at least 1.4j. It does that because the inner barrel is very short. It's the same with Krytack. If you buy the krytack aeg that comes with 2 uppers you will get ~1j with the short upper and ~1.5j with the long upper without chaning any of the internals in the gearbox.

@cunnyfred9562 Жыл бұрын

@@TraceurSoul I think the best option is to change the barrel. A stronger spring will put more strain on the motor and gearbox, so changing the spring will be my last option. Anyway, I think that manufacturers and retailers are deliberately keeping the fps down, because of UK power limits of 1.3 Joules (1 ft-lb) for full auto guns. Its all ridiculous. Gone are the days of full auto AEGs that shoot 450 fps out of the box.

@microsoft-xl5809 Жыл бұрын

the high speed mp5 series from cyma is phenomenal, or at least that’s what my experience is through my blissful ignorance. my mp5sd high speed performed great stock and even better with an aster v2. 34rps with an 11.1, incredible snappiness, shimming sounds perfect and i recorded a spread of about 6 inches at roughly 160-170 ft with .32s. the only issue i had was that the trigger return spring went out and i had to replace that. aside from that, no issues. a friend of mine has the standard mp5 variant (with the triangle handguard) and it’s similar in performance. i’d say they’re more than worth it.

@microsoft-xl5809 Жыл бұрын

i forgot to mention that the RPS ratings were recorded post Aster install. before, about 28rps with an 11.1 and 24 with a 9.6

@m1a1abramstank49 Жыл бұрын

On the topic of Cyma Platinums, my Cyma Platinum M4 piston makes a hissing sound when going into battery and it doesn’t even shoot air out. I have this odd feeling the rubber mushroom part of the piston head just gets suctioned into the back of the piston head.

@cmarriott3835 Жыл бұрын

Bum sausage

@rogerborg Жыл бұрын

Just slap a Tokyo Marui sticker on it, and those 0.77 Joules will suddenly start outshooting DMRs.

@Matt-md5yt Жыл бұрын

Cyma is the bane of yours and yet it's often on the bench

@NegativeAirsoftTech Жыл бұрын

I love them.... but this wasn't good

@MediumPoo Жыл бұрын

Is this the same gearbox that's in the .041G and H? Was thinking of getting one or is the .097 a safer bet?

@mihai- Жыл бұрын

This is V3, the other non-K mp5 uses V2 gbs.

@Breezyaon1 Жыл бұрын

Mate, did trim your thumb? Looks shorter I swear

@senpuuxd1032 Жыл бұрын

How long u use nozzle 22.3mm?

@TheSiliconeSlug 22 күн бұрын

What did you do to remove the orange tip? Also, what battery are you running?

@NegativeAirsoftTech 21 күн бұрын

I'm in the UK no no orange tip.

@TheSiliconeSlug 21 күн бұрын

@NegativeAirsoftTech I actually got it off thankfully wasn't too bad thanks

@hitmanslayer3003 Жыл бұрын

Surprised you couldn’t get more power out of it.

@rogerborg Жыл бұрын

Yup, that's wank, I'm getting a surprising 1J out of a cheap Galaxy MP5K with an M100 and a 110mm x 6.01mm barrel. Airseal, I guess.

@planetcaravan2925 Жыл бұрын

Do any of youre guns feed? You always shoot without mag

@NegativeAirsoftTech Жыл бұрын

Not my gun....

@julianking4531 Жыл бұрын

Could you please make a video where you use your 12volt 3300mah battery where you haven’t fucked up the connections like a knob

@NegativeAirsoftTech Жыл бұрын

Pretty difficult request

@cobalt930 Жыл бұрын

Radiusing on a v3 ? Is that even needed lmao

@MidlandsAirsoft 4 ай бұрын

ki-ma or cee-ma

@yted8737 Жыл бұрын

It’s not an mp5 it’s a travesty 😂😂😂😂

@Ultra-Collector Жыл бұрын

Luke I have 5 different new ,unboxed ,full metal GBBR and a Full metal H&K MK1 m249 SAW heavy with 16 metal belt rounds. One of the GBBR is a new never opened L85,she’s a really chubby,new version British puppy! I have new metal kits for the KWC/CB mini uzi too! Anything nice you’d like to trade? NEast Uzi etc… What’s your contact? I’ll send you pics! DM on IG?