I have a cz scorpion evo 3 pistol, and the cz scorpion magpul edition carbine...they are simply badass, and they run flawlessly. They are beasts. Added the Franklin armory binary trigger system to my pistol. So much fun.

Got a pi stol variant evo, loved it so much, got the micro in april. Ive loved it. Shooting it suppressed, just puts a big stupid grin on my face the entire time. Good stuff man CZFORLIFE

Love my EVO 3 carbine, going to add this one to my CZ collection

I just got mine yesterday, and I can't wait to shoot it. Mine is a little different. I have the Magpul spring loaded flip up iron sites and I bought the Sig Sauer Romeo 5 red dot. The muzzle break is also different, it's more like a breacher for a shotgun. I love it. And it has a folding stock, not the slide out like yours.What impressed me the most is the beefyness of the parts. The bolt is a solid and the whole thing is built like a tank. And it's so easy to take down. I paid $1200 for mine. The two included 20 round mags are the Gen 2. I bought two Magpul 35 round mags for $20 each. I have not seen a bad review anywhere. I have the Ruger Charger as well and it's a piece of junk compared to this thing. I still like it, but it's like comparing a Chevette to a Corvette. Yes, you can say you have a "vette" with either, but in reality....liked and subbed

A couple had one of these at the range yesterday. I’d love to own a full auto version. Thanks for sharing!

Love this gun. Replaced grip/mag release with new magpul options. Safety selectors with apex low profile. HB industries trigger shoe, spring kit and extended charging handle. All super easy installs and really gets you to know the gun. I highly recommend!

The mag release you can take it or leave it. I swapped mine out with one that adds a paddle to the bottom a la MP5 because even though the OEM release is textured, I have had my finger slide pass and miss it when trying to engage it under stress or wet fingers

Congratulations I just noticed you have 30K subs; you deserve it with your hard work and quality content you put out. Looking forward to the next one.

Awesome review KS on this CZ scorpion EVO 3 S2 micro. I would love to have one.

I’ve definitely been considering this weapon, thank you for the video! Keep up the content!

I am shocked you don't have more subscribers . Your video production is top notch .

Nice Micro! I have completely upgraded mine. I'm ready to hit the range. I definitely like the faux can. I would definitely get it if I didn't have plans to run mine suppressed and with a reptila corp brace.

Love the Scorpion

I handled one in the store and the brace definitely has some play to it. that's probably why they discontinued it and put out a new version with the new UMP looking folding brace

Just picked up my 2nd gen Micro... I love it!!! Im also from KS

Nice review KC. You saved me from buying the brace! I just bought my second Scorpion Evo 3 S1. Probably going to go with the SB3 brace.

Have had my CZ Scorpion gen 1 mags loaded for over 2 years, and they have NO cracks whatsoever... So I'm thinking that issue has passed hopefully! Thanks 4 the review

just picked one of these up a few days ago and of course went to play with it. I had to adjust the iron sights a little but thing is a laser beam. I do not recall if there is wobble in my brace but if there was i really did not notice it. great little gun

Loved the review. Thank you!

Oh also the magazines can be had from 4 different companies now too so there's no shortage of mags and they're all sold at a very reasonable price!! Rock on!!

Always value your opinions and reviews. I just ordered the 7.5” barrel standard size version, hopefully a little less recoil, and I’m going to throw the SB side folder brace on it. Hopefully that takes care of the issues you mentioned. Still enjoying this a year later?

Any suggestions as to the optimal "practice" (aka fun time) FMJ ammo for the S2 (excluding cheap steel), with a view towards maximum 50-100 yd accuracy? And what's the "best" home defense JHP ammo for the S2 for maximum effectiveness but controllable recoil (cost not being an issue)? I've got a Glock 45 which has a similar 4" barrel, but I doubt what's best for the G45 is the same for the S2.

just picked one up yesterday its my fav model by far vs the newer models. even though there is play in the brace i still like it better than the newer version

Hi KS! Great review! Can you tell me, what is the model of the bolt that you replaced?? And how is the new part working out?? I like to order the piece you recommended when I order the gun. Thanks in advance!!

I just put together a video of converting my CZ Scorpion over to my own K configuration. I hope to shoot it in the next week, but so far I love the shorter/lighter package. Love the CZ Scorpion platform...such a fun little firearm. Great review! Have fun with that little guy! oh, and I did the same thing to the right side safety selector, but eventually swapped both out for a nice set from Parker Mountain Machine.

Finally more competition for the mpx Good review as always

Fantastic video and thanks for posting!! Can you please tell me if the factory irons witness through the bottom of that Holosun mount? Thanks!!

Really want to get my hands on one but seem really hard to find right now. Good tips on modifications.

I would love to get a hold of one of these. I have yet to even handle the Scorpion of any design, one day hopefully. That micro model is very nice, and love the collapsible stock! Have a great day brother!

Really cool! I really need to get out of Kalifornikstan.

Now you've done it. You've made me want one very badly.

What an awesome gun!

Cool gun to have so much fun....Good stuff....

What validates price differences between the scorpion and say a psa9.. dont bash my head in, Im just curious

Polymer sound so cool, better then plastic :)

Great review! I've had my eyes set on the Scorpion Evo for a long time. I believe I saw this one at shot show last year. I've been waiting for this version to come out (short barrel) because I want a suppressor that will be in a compact version. I might be picking this up for sure within a couple months. One question though, did the SB Tactical Brace come with your set up or did you just buy the pistol itself and add it later? I might have missed that in the video somewhere.... Anyway I will be modding it for sure with a red HB Industries trigger and a red charging handle. Also a new grip and I have to do something with the safety for sure since I shoot wrong handed. Thanks again for great content!

I can’t wait to get my hands on one!!!

Thats a pretty gun. 😍

Great review!

Got my own S2 yesterday. Did you had to remove the brace to replace the grip? I was sliding it back to remove it until it hit the brace harware.

Love my micro!

I have a Kriss vector carbine and one of these and the cheek slap i get from the Kriss is worse than the recoil from the Scorpion Mico.

My LSG has one here. I think I'm gonna "pull the trigger."

Hats off..very nice review.

I also have a problem with the amount of play in the brace but for its intended purpose as a sort of PDW thing, close range shooting is the point. I had a side folding brace and it felt more solid to shoot precise shots.

Those are fun to shoot!!! Hope to do a review on one of these soon. I should probably give Al a call 😃😉

What's the price range for this, & what caliber ammo does it take??

Super cool looking gun.

Do they use cement to lock that grip on?

Does the suppressor piece come with the handguard or its separate?

“Hushaboom device”, you just expanded my vocabulary

I want one so bad...I gotta look up how to remove a kidney at home... You should get a Diamondback Grip by Nightstrike for it, it is the best angled foregrip Ive seen and it would be a great foregrip for this pistol.

Would love if you did a update video on the Micro

Just bought mine today- It's fucking amazing!!!

in regards to the brace wobble. The brace on my MPX is essentially the same design, with similar wobble. I have found that with a more vertical grip, and rearward pressure it locks it in a single position, it is a complete non issue. Zero affect on shootablity, other than the poor cheek weld.

The Psa AKV9 mags fit and function fine with the exception of being not drop free

Nice Review, Carry On

What optic would u recommend?

It looks like it would be fun, but I'm with you on the quirks you called out.

Is this CZ scorpion A right threaded 1/2 x 28 for suppressor mount?

Is there any firearms this side that shoot 556 or 223

That thing is sick

How was the recoil vs the MPX? I know you didn't have them together, but curious if it's noticeably more than the MPX

Nice toy I really like it.

How did you know that I been considering a scorpion now that there is starting to be more aftermarket support. I agree about the brace, that would drive me crazy. Looks like a folder would be the way to go. Great review as always

Use the low mount for your holosun, it works better with this pistol and your irons co-witness through the sight quite nicely. If you switch to the low mount you'll negate any slight wobble of the brace since you're not having to hold your head so far above the brace to look through your high-mount.

What scope mount are you using? High ring required I guess? Thanks in advance

MIRCO?!?!........ lets get an LMG SCORPION :D

Damm this is nice. I want to convert my cz scorpion

I thought I'd mention that the newer S2 mini's (I just got mine a couple of weeks ago) now come with the Magpul flip-up MBUS sights. They're not metal like the ones here, but a benefit is that they're a little taller, which makes them perfect to so-witness through an EOTech (which looks and works amazing on the S2) and other similar RMRs.

I really love the looks of that brace but the movement is just not acceptable for me. My S2micro has the folding SB brace and it too had some wiggle. I fixed it with a piece of packaging tape where the brace folds and it's tight now. Really great video. I love my Scorpion

We removed the stock brace for the folding brace which made targeting alot better.

where can I buy the faux suppressor, If you can provide the link please

CZ Scorpion vs Sig MPX K I see it coming! :)

I kept my EVO with its original barrel length because I'm not a real fan of K type subguns. There is such a thing as too small. I bought the new PDW brace for the Micro, changed the handguard and also changed grips, selector and charging handle. At its core, it's still an awesome gun to shoot and handle. I had carried mine in a regular backpack that I've modded inside to fit the gun, spare mags, and other things as my truck gun. I do not like the original grip or selector because I know when designed, they wanted this gun to be handled with gloved hands

The S2 does seem to recoil harder than the S1. Glad I got an S1.

hi, how much does it cost, and if it can be sold in Italy?

Awesome vid.

I like my fingers .. so Hand Stop .. YEP !!!

Its the first time I saw ur Face. What would you cz micro or the 7.7 inch?

Is it comparable to your Sig experience? I know it isn’t as heavy as an MPX.

Magpul makes the best magazines for the Scorpion in my opinion

That's too bad that the brace isn't top notch. I have the full sized evo with an added SB folding brace...great firearm. The only reason I wanted this model (aside from the cool faux silencerco suppressor) was the collapsible brace. Thanks for the great review

What is a thread pitch? I believe you’re talking about a thread count and size

I have shot a full auto scorpion evo and it was a blast, pun intended.

really would love to get my hands on one of these, you know whether or not centerfire has one to rent?

How much do this cost???and where I get one?

Great Job KS. How much was the asking price for your model? And Also you Might want to Replace yours with the Folding Stock. It may eliminate the wobble. Cheers!

Whats the difference between the S2 and the S1

Are you still enjoying the Micro and have you made any other changes?

Can you take it down without removing the Apex pistol grip?

Looks awesome but I think imma cop myself a mp5k

I never seen anyone use a brace the way it was designed to be used 😂.I wouldn't never use it

I like my MP5sd, higher cap mags and its battle tested.

Also that's the same holosun I'm going to try on my .45-70

I'd like to have it!

Subscribed 👍

Any co-witness with that optic? Doesn't look like it.

Great review and video as usual!! I put a brace on my scorpion made by Safety Harbor Firearms and it's awesome and solid as a rock! I would definitely recommend them to anyone who is looking at buying a scorpion!!

Is that baby foreground thing on backwards?