Dakota Digital Gauges for 94-04 Mustang

Рет қаралды 22,083

Күн бұрын

Thank you for watching and please subscribe for even more!
In this video Team member Frank Perdomo covers the all new Direct FIt VHX series Dakota Digital gauges for 94-04 Mustang. The gauges are designed to be a direct replacement for the oem cluster. For the coyote swap croud this makes getting gauge read outs from the coyote pcm a hole lot easier. You can wire direct to the coyote pcm without having to keep your stock pcm.
Frank covers the cluster and all the bim expansion modules for the coyote swap builds.
For more info, click this link to see color and face options.
pbhperformance.com/product/da...

Пікірлер: 67

@PowerByTheHourPerformance 4 жыл бұрын

Hey guys we offer this product on our website. Check it out at PBHPerformance.com

@tonyb022377 4 жыл бұрын

Long live the new edge's!!!

@hermanrogers1325 2 жыл бұрын

Yep my 04 mustang GT automatic dark shadow gray 182,000 miles and runs good and strong

@ttstang43 4 жыл бұрын

dakota digital is awesome... helped me make my autometer gauges properly work

@prfiljothuglife6366 4 жыл бұрын

Finally SN95=King

@littlehorus2327 3 жыл бұрын

Just ordered mines!

@littlehorus2327 3 жыл бұрын

I'm still waiting on my control pack for a gen 3 swap :( its been back ordered for the longest 😫

@ReyesBuilt Жыл бұрын

will these gauges keep track of miles and store them? with the gps module? will love to keep track of my miles on my coyote swap.. rn my speedo is dead going from the t45 to tr3650 because of the oss to vss swap

@FoxcastMedia 4 жыл бұрын

Love em, we are about to order one!

@PowerByTheHourPerformance 4 жыл бұрын

Fire away!

@NewEdgeDesigns 3 жыл бұрын

You said they were coming...Love ur content foxcast, thank you..

@gregoryl8374 3 жыл бұрын

The SN-95 instrument cluster amp gauge (batt) is in series with the alternator and battery via the amp bulb and 510 resistor to charge the battery, does this unit incorporate that function ?

@jamesgoudeau5982 Жыл бұрын

for 95 GT5.0 speedometer reading info will use GSP for determining speedometer reading instead of current method. Is that correct?

@bblsd07 Жыл бұрын

I put in 347 stroker, with 4150 Holley EFI carb / I AM NOT using the SN95 mustang computer~ will this cluster be a plug in and go?

@glenndiorio8967 4 жыл бұрын

Great looking dash. I do have one question. You say it has to integrate with the OBDII port. Well, here in CA you can't have anything else plugged into the OBDII port and be legal. Is there a work around for this? I'm in the process of swapping a Coyote into my '02 GT. Thanks.

@PowerByTheHourPerformance 4 жыл бұрын

Greg, you can remove the ob2 plug from the bim module and hardwire it to the back of the connector. This will allow you to power it up and bet the can bus signal.

@glenndiorio8967 4 жыл бұрын

@@PowerByTheHourPerformance So what you're saying is it will be hardwired in series with the OBDII plug, just on the backside. That I can do. Do the dash`s come with the Check Engine, flashers and other warning light capabilities?

@PowerByTheHourPerformance 4 жыл бұрын

@@glenndiorio8967 they do Glenn. If you visit our link you can see it lit up in the gallery

@littlehorus2327 3 жыл бұрын

Exactly why im keeping my car registered in texas. I think the hardest part of coyote swapping in the state of CA is getting these car parts in out from a different state to get em shipped 🥴😵

@jamalhijazi Жыл бұрын

Yes move away from California

@mikeinvegas1 2 жыл бұрын

Hi i dont have a coyote engine. Mines the stock one jyst modified. Do i need to purchase the expansion pack?

@thegregshow1761 4 жыл бұрын

Can you guys do a independent rear suspension conversion on a 2014 gt500?

@PowerByTheHourPerformance 4 жыл бұрын

Greg, we think with time and money all things can be accomplished. For this swap, we do not have any direct fit options to pull from. So it would be custom and may require wide body flares or custom wheels for fitment. The go to would be a s550 irs. Not something we would take on but some chassis shops could knock it out.

@Axel_F23 2 жыл бұрын

Will the work with a 99 LS swap?

@rickmortimer7143 3 жыл бұрын

Gen 3 reads oil pressure from OBDll Ford Control Pack

@williampagan3449 3 жыл бұрын

I have 1994 mustang what i need to make this work?

@patrickmorris7814 4 жыл бұрын

Any updates on the S197 3v to Coyote swap harness?

@PowerByTheHourPerformance 4 жыл бұрын

We will have some updates soon.

@beastyvas7615 4 жыл бұрын

i’m a little slow , can these gauges work with a regular sn95 without a coyote swap ?

@PowerByTheHourPerformance 4 жыл бұрын

Yes they can. Simply install supplied senders and wire all other inputs to the control box.

@vampiroproductions01 4 жыл бұрын

@@PowerByTheHourPerformance I am even slower. Can this upgrade work on the SN95 V6 models?

@hermanrogers1325 2 жыл бұрын

I would like to have one but I want it to be plugged into and play

@TwO2ThAt 3 жыл бұрын

Will this work on a 95 5.0L that isn’t coyote swap?

@PowerByTheHourPerformance 3 жыл бұрын

Yes it will. It can be used for any engine combination. If the car has anti theft/PATS then it needs to be deleted for use.

@ronin2167 2 жыл бұрын

I want green backlighting. That's what is stock on an 01' Bullitt.

@streetslayers410 4 жыл бұрын

$800 is a lot better than the $1200 classic dash kit

@sergiomurillo9930 3 жыл бұрын

Do they actually sell classic dash kits? If so where?

@streetslayers410 3 жыл бұрын

@@sergiomurillo9930 I bought mine off ebay

@sergiomurillo9930 3 жыл бұрын

@@streetslayers410 thank you

@streetslayers410 3 жыл бұрын

@@sergiomurillo9930 kzfaq.info/get/bejne/hZiAYNWK1treZWg.html

@streetslayers410 3 жыл бұрын

@@sergiomurillo9930 you can see mine in this video

@dariusqualls1412 4 жыл бұрын

Would these gauges work for the v6 99-04

@PowerByTheHourPerformance 4 жыл бұрын

Yes they could be used for that year. You would still need to wire in all the senders and lighting signals along with a pats delete flash to the pcm.

@dariusqualls1412 4 жыл бұрын

Power By The Hour Performance how do I do the pats delete

@hectormora60 3 жыл бұрын

What about the turn signals?

@PowerByTheHourPerformance 3 жыл бұрын

Hector, what are you asking? if they will still work?

@altoncelestine5226 2 жыл бұрын

95 gt cluster how much

@stanglife_chevygang00 3 жыл бұрын

Will it work with a v6 mustang

@PowerByTheHourPerformance 3 жыл бұрын

Bryson, yes it will. One thing you will have to do is have the Pats system turned off as this cluster does not have that module built into it.

@Scientists_dont_lie 4 жыл бұрын

Kills me I can't get these guages for my Honda..

@justinmccaffity6635 3 жыл бұрын

I just wish there was a way to hook up cruise control.

@PowerByTheHourPerformance 3 жыл бұрын

Look for aftermarket systems that plug into the fly by wire pedal. You could probably wire that into oem switches and controls too.

@justinmccaffity6635 3 жыл бұрын

@@PowerByTheHourPerformance I have. Only thing I have found is that dakota digital might be making one but thats it. You could go with a drive by cable throttle body and then try to mount a dakota digital universal kit but I am not sure if that would work with the gen 1 control pack.

@justinmccaffity6635 3 жыл бұрын

@@PowerByTheHourPerformance do y'all's control packs still have the dummy plugs for cruise control?

@SRobison1931 4 жыл бұрын

Finally...I can get rid of the Intellitronix set up in my Coyote swapped Cobra

@eclips8510 Жыл бұрын

I know this comment is older, but can I ask what you don't like about the intellitronix dash panel? Was looking to get 1, but I wanna hear from ppl who do or have owned 1 before I dump $400 onto a dash panel.

@SRobison1931 Жыл бұрын

@Eclips85 I actually still have it in the car, I don't drive it much. Just seems kinda dated to me. But intellitronix seems to be a good company. Any questions i sent them, they replied back quickly. They keep releasing dashes for other vehicles, so people must like them.

@eclips8510 Жыл бұрын

@@SRobison1931 thanks for replying! I'm looking to get 1 for my '00 Mustang, but I've recently been seeing comments that a lot, if not all, warning lights don't operate with theses dashes. Been eyeing 1 for 3 yrs now, was hoping they would come out in yellow, but have yet to so far. Was just gonna buy 1 and attempt changing the LED bulbs to yellow, but it's my DD and the lack of warning lights is really deterring me. I'd really like a digital dash, but I may just keep an eye out for potential other brands.

@NewEdgeDesigns 3 жыл бұрын

If ur going to coyote swap a bullit, Mach 1 or cobra why would u care if ur gauges were swapped out?? I think originality has jumped the shark at that point...

@PowerByTheHourPerformance 3 жыл бұрын

I could see why the Mach 1 and Bullit guys would want to keep their gauges, they were particular to the car. I think thats the only reason to fight to keep em.