Hit me up man. PreachAndPlay.com

Contact me

Thank you!

Yes, The Yamaha TIO 1608 is great. I'm planning to purchase two more for my church and my production trailer.

This works with any Dante stagebox - Yamaha, Tascam, Alleh&Heath, whatever... First Yamaha Rio should work because it's still Dante, so since like 2009 or longer... but it costs. Stagebox cost a lot of money and PCIe card costs also a lot of money. You can use Dante Virtual Soundcard which costs like $60, but it has too much latency for realtime monitoring so for mixing you would want PCIe card which has Ethernet input for Dante audio but is visible as regular sound card in software. Another problem with this solution is preamp control. Dante protocol specifies only how audio travels through the network. But all preamp configuration (gain, +48V, sometimes even analog Lowcut directly on preamp) is all propietary and you can't control Yamaha stageboxes from Alleh&Heath or any other console - works only with Yamaha, so you need Yamaha remote control software on your computer to setup gains/phantom power. That might not be much issue in studio (as many other audio interfaces has such software), but for live applications sitting with tablet and Yamaha app opened just to setup gains on gig is totally terrible user experience.

You’re welcome sister V. I’ve recorded a whole series on Dante Audio, and more. Releasing March 1. It’s going to be highly informative

@@PreachAndPlay Great!!!!

Google it

Exactly, which a totally different and bigger problem. But they want excellent audio. Haaaa. You can’t be scared of heights and want a ladder. Your need for the ladder demands you get over your fear of heights. “Metaphorically speaking”

Hey man. I’m updating the website. Goto learn.PreachAndPlay.com to see the new website. Contact info is there. Sorry about that. I’ll answer your question this week

I know that. Human moment. I didn’t mean to say that

No

This is the Presonus Studio Live AI 24.4 with a Dante Card Installed in it.

Yes

I’ll make another video. Short story, you must have. Presonus A.I model which will take a Dante expansion card.

Contact me thru preachandplay.com. Yes I offer further training

So you don’t understand how stage boxes work. The stage like a mixer has inputs. The difference is the stage box sends the information back to the mixer via cat5e or Cat6. The mixer can’t do that. At best the mixer can only be used on the stage as a true mixer with the output of the mixer connected to Dante Dongles. This will put the Mixer on the Dante Network. If you try to buy a bunch of Dante dongles it become and expensive imitation of a stage box

Let’s talk

I’m planning a series on this because there’s nothing brief about it

Standby. I’ll do an illustration later tonight. Around 8:30 pm Central standard time

I’ll try make this happen for you

@@PreachAndPlay 🙏 thank you

That’s only the mixer. What if you have other speakers, laptop, headphones amps, etc. Dante allows you to send or receive to multiple devices. The method you mention is limited and one dimensional. It works as you mentioned but eventually you may want to expand and do more than that configuration allows. With Dante you are future proof and way more flexible

@@PreachAndPlay I understand it better now. Thank you for your help. I subscribed to you today.

Only Dante enables devices allows you to connect all channels thru the network.

If you have a computer, Dante Virtual Sound card, and the Yamaha Tio, you don’t need a mixer. The mixer adds the value of zero latency Eq, Compression, etc The computer in theory, depending on software, will yield better eq, compression, etc. Only latency gets added more you use . I do it both ways. Each way has its value

Yes

Sorry I’m just seeing this. I’m not sure. I’d need more info but not sure what a Xfa te is. If you have a Behringer X32 set is as the clock master with internal sync. If you have other devices that are connected to it, connect them together and slave other devices to the Behringer. How they connect and sync depends on the device but if I have more info I can guide you further

Yamaha has software called “Remote”. It interferes with the Yamaha TIO1608. You can enable phantom power (+48), HPF and mic gain from that software remotely. If you use a non Yamaha mixer you can still control those features remotely via that software and still send the audio information via Dante. Dante and Remote then become two different solutions working together as a team. Hope you understand

@@PreachAndPlay I got it. I didn't know the remote app functionality. I am using on my church tio1608+TF3+dante to feed the DAW which we use to generate an independent mix to the live sound video stream. Vmix get the sound from the dante network. Its a great solution.

My in ears are Sennheiser

@@PreachAndPlay Thanks for the reply. May God bless you and your ministry? Will check your website for more information. I am trying to improve the video and audio in my church

I’ll do a video tomorrow about my in ear system for you. I don’t have that on the website yet. I’ll get it done after church

Budget friendly is way to subjective to give an answer. We need to figure out what you’re trying to accomplish. I’m a Mac user so I recommend Macs

Easy!!! Yamaha software called R Remote. All controls are there.

No I haven’t but auto tune will not effect anything. Auto tune will be applied before the signal gets to the Dante network. I don’t use auto tune in Ableton .

It’s on my website in those keys. Subscribe to preachandplay.com

Those videos are available on preachandplay.com. Consider subscribing to view. I don’t do this for free anymore. If you contact me privately, I can arrange sending you these videos for a small fee. Thank you for liking our videos

I would use Dante to get my audio in and out of a Computer. At that point yes. The only question is how are you getting audio into computer from the Midas. Dante? Audio interfaces? A Midas feature that outputs directly to a computer? Does your Daw accept 64 simultaneous inputs?

One that I’m not a huge fan of but it works. Presonus studio live AI 24.

@@PreachAndPlay Thanks for your prompt reply. Does that mean the unit in the rack is just a digital stage box since studiolive ai series is not a rack? Does the stage box have Dante as well?

Great question. I’ll do a quick video to help you understand. I’ll tag you in the video. Give 20-30 minutes

@@PreachAndPlay I'm pretty sure this follows under the same stuff that I am trying to figure out... Like will dante allow a computer to interface with other computers with their own USB interfaces? Also, I found out about something last night called "Dante Via" and the somebody said that "Via" has to be on one of the systems to set the clock between "Virtual Soundcards". Please clarify. BTW: To be clear, I truly appreciate your taking the time to clarify these things. I hope that nothing I am saying is coming across as though i'm arguing or anything. I am asking a lot of questions because i'm trying to understand and figure it out. And, it's a lot... LOL

@@sekritskworl-sekrit_studios long day. I’ll reply tomorrow. Probably by video

Great to have. Not necessary for small projects

Man I have no idea. I would search the forums.

So sorry I couldn’t help

@@PreachAndPlay No problem. Do you need to register the dante card when you setup and configure the dante network? Thank you

@@mtso1122 no

@@PreachAndPlay got it. Thanks again

I don’t have any NDI gear. I hear it’s good though

@@PreachAndPlay there is a free NDI plugin for OBS. Also NDI 5 is amazing,

@@melechhaarayot9273 I’ll have to check it out. Thanks

Hey Alex. I’m using many switches because my setup is interconnected between my entire operation. I have all netgear switches. I’ll give you model numbers once I get back. The important thing to remember is get a “managed switch”. Also, it good to get the extra feature of “POE”. (Power over Ethernet) If you use Dante Dongles, etc they will require power. If you have a switch the you can just get a power “wetter” for each device that needs power but getting POE is one thing I regret not doing. I recommend getting a Managed Switch with POE on a couple of ports. Trust me it’s worth it.

I’ve created a very affordable audio course on my website. I’m not familiar with what schools to goto because this is a career that I’ve entered that allows a measure of on the job training

Was Dante Via purchased?

Yes I purchased Dante Via but don't really use it

There are different subscriptions depending on if you are a musician or media person. Check out the website. Preach and Play.com

Yes. Dante is not proprietary. Yamaha shows up in Dante controller. Yamaha does too. You make the connections in there and Bam! Magic. I’ll do another video if you need.

@@PreachAndPlay yeah I’ll be grateful. We have a Studiolive 32 but the product was discontinued this year as well as their 32 channel stagebox. They’re selling 16 channels which are so expensive we can’t buy 2. I’ve been looking into other branded stageboxes but kept discovering that that protocols were different..

Also, I’ve done productions that have Behringer x32 mixers and Yamaha Tio1608 and Yamaha Rio. If your mixer is dante enabled then you can use a dante enabled stagebox. Period! Goodluck

So I’m thinking, with Dante software and a gigabit switch, our Studiolive 32 can use a Behringer stagebox and possible P16ms

Bro! The Tios are $1099 for 16 in and 8 out. They can be tricky getting setup “if” you try to use static ip. But worth it

Did you watch the video?

@@PreachAndPlay Did you cover the connection of the mixer (USB/Thunderbolt/Dante), etc?

Might do a video to answer the question you brought

Yes

@@PreachAndPlay But HOW? I "thought" that Presonus was absolutely committed to AVB and refused to interface to Dante networks? They don't even have any for sale or in their "legacy products" list that I can find.... which model is it?

@@sekritskworl-sekrit_studios did you watch the video? I have another video I want you to watch. Long story short, the Presonus Studio Live Ai is Dante capable via the option $500 expansion card. I use it daily and it works great. However, if you don’t already have this mixer, I would not recommend buying it over many other options. There’s only one advantage this mixer has. Only one!

Presonus 24.4.2 Ai. The optional Dante expansion card makes it Dante

It’s called marketing. You speak as if people don’t need convincing to spend money. Comments like yours are a waste of time. Just move on if you don’t like the content. You aren’t who I’m aiming for. Dummy