Live Stream Audio - Make It Sound Better - Part 2

Live Stream Audio - Make It Sound Better - Part 2 - Setup and Configuration

Рет қаралды 30,393

Жыл бұрын

In this video I'll walk you through the setup to create an isolated live stream mix in a DAW.
EQUIPMENT LINKS:
Console Dante Expansion Cards
Behringer X32: amzn.to/3MWduKx
Behringer WING: amzn.to/43NSlsR
Soundcraft Si: go.magik.ly/ml/1u2qu/
Allen & Heath SQ: go.magik.ly/ml/1a5s9/
Allen & Heath dLive: go.magik.ly/ml/1u1wy/
Dante Network Switch: amzn.to/3ClmfJa
Focusrite PCIe Dante Card: go.magik.ly/ml/bpfs/
Audinate AVIO Analog 2-CH Output: amzn.to/45SZRV6
Audinate AVIO AES/EBU Digial: go.magik.ly/ml/1u1wu/
Small Mixer: amzn.to/3WWnk3Z
Kali Audio LP-6 Monitor Speakers: amzn.to/3qx00O3
Audio to SDI Injector: amzn.to/43JeFUz
Ethernet Networking Cables: amzn.to/3MXUvzt
XLR Audio Cables: amzn.to/3qztyua
AES/EBU Cable: amzn.to/462QxOO
SDI Cable: amzn.to/45S1zpL
DOWNLOADS:
*** System Diagram & Equipment List PDF: bit.ly/43N9Sl5 ***
Dante Controller: www.audinate.com/products/sof...
Dante Virtual Soundcard: www.audinate.com/products/sof...
OTHER RESOURCES:
Amazon Computer Search: amzn.to/466QUIf
Source for acoustic treatment design: www.musiccityacoustics.com/fr...
MAKE MY LIVE STREAM SOUND BETTER
PART1: Why an isolated mix? - • Live Stream Audio - Ma...
PART2: System Setup - • Live Stream Audio - Ma...
PART3: Configure Reaper - • Make My Live Stream So...
PART4: Waves Plugins - • Make My Live Stream So...
PART5: Free Plugins - • Make My Live Stream So...
PART 6: Volume - • What VOLUME Should My ...
PART 7: Pitch Correction - • Make My Live Stream So...
PART 8: Hardware Faders - • Make My Live Stream So...
PART 9: Two outputs from Reaper - • Two Audio Device Outpu...
CONNECT WITH ME:
Subscribe: kzfaq.info_c...
Facebook: / stephenballastmedia
www.ballastmedia.com/consulting
*affiliate links

Пікірлер: 84

@BallastMedia Жыл бұрын

In this video I didn't talk about control surfaces, which I think is an important part of the overall setup. Should I do a video about setting up control surfaces? Nothing beats having fingers on faders!

@Muwanguzi. Жыл бұрын

Please do. It'd be a great resource for us.

@danielvelasquez1853 Жыл бұрын

Yes please would be great!

@wangadyarusten9012 Жыл бұрын

Eagerly waiting for it please

@gregghall2294 11 ай бұрын

Absolutely

@confidencedavid5956 5 ай бұрын

Yes please

@milesmcgraph Жыл бұрын

Great stuff. I've been wanting this clear and well thought through tutorial for a while now. It really helpful. I'll only add that you post more often. 😉

@michaelcyrus4398 3 ай бұрын

Truly, God bless you for taking the time to make these videos. Even with the appropriate budget to duplicate your suggestions, it will still be a challenge for many to achieve the end product. It will take much time and technical knowledge. Thank you!

@PeteNeria Жыл бұрын

Just so helpful. Thanks for these great videos!

@jdiwild 3 ай бұрын

Thank you for your work...really helpful and I really appreciate it.

@paulstubbs7678 Жыл бұрын

Wow, what a massive setup, at my church we're lucky to have one person to do the lot (me), AV slides, sound (analogue Yamaha MG20XU), two PTZ cams, and streaming (OBS), all done in the actual church, no side rooms etc. Most who walk up usually run the other way when asked to help. Luckily bands tend to be 4 mics and one guitar or keyboard.

@mtso1122 Жыл бұрын

May I have the link of your church?

@paulstubbs7678 Жыл бұрын

@@mtso1122 put "st francis xavier church frankston" in the KZfaq search bar

@mtso1122 Жыл бұрын

Thanks for the video. I am so eager for your audio template.

@adamjohnzon 7 ай бұрын

This is great! Thank you so much!!

@coldhardtruth333 8 ай бұрын

Came from Part one .. Thank You

@gamma5vega Жыл бұрын

Next level bro!😊😢

@cephaswesley7684 Жыл бұрын

Hi thanks for making these videos, you have been most generous with you time. It’s interesting that you have mentioned about the switcher unable to handle modern broadcast level audio (-10 to -14 LUFS short term and -14 LUFS long term). We use a Aja Ki pro Ultra 12G and feed it with analogue audio from broadcast console, when the stream is live on KZfaq the audio sounds ok but the recorded audio on the video changes the stereo image as well as tonal balance. Wanted to know if this is also a know issue on AJA Ki pro devices when feeding analogue audio. Usually the meters on the Ki Pro are in red when receiving broadcast level audio.

@ejwalker9054 Жыл бұрын

I've been following you for years and always appreciate your content!! We are in the process of putting all this into place. My one question is how would you solo a channel without the solo going into the live stream? We are using a PC

@BallastMedia Жыл бұрын

I'll cover that in the next video! Good question.

@vitorlorranoficial 4 ай бұрын

Congratulations on the content. It helped me a lot, but I can't download the PDF file in the video description. I'm waiting for a new link, please.

@renovxperts 11 ай бұрын

Thanks so much for an awesome & informative series. Please advise on specs for a budget Mac Mini or Windows alternative. We would recommend on a budget for a DAW that shall be used primarily live Live Steam Audio production. We are a small church with 2 keyboards, basic drum set & 7-10 vocals mics. Thanks again for all the great content.

@BallastMedia 11 ай бұрын

So, you're looking at about 24 channels. Look for an i7 with 32GB of ram. If you're willing to take a risk on a refurbished machine something like this should work well: amzn.to/3PjZugn

@WayneWatson1 9 ай бұрын

I use dante into the mac mini ethernet port and a usb sound card out (which also has a headphone for monitoring) to the encoder's (atem mini pro) line in. I'm playing with logic pro trial at the moment. Reaper too confusing

@donovansolomons1453 7 ай бұрын

Hi, can you maybe explain how you do the same thing via usb out from the mixer instead of the dante card.

@clintclayton7257 Жыл бұрын

Love your videos, and while I would love to be able to have a setup like this, my church just can’t afford this. Could I use VSTs on OBS to even get close to that second recording you showed? I’m new to this and didn’t know if you had a video on VSTs or not. Again, love your videos. Gives me something to shoot for in the future.

@mtso1122 Жыл бұрын

If you have a digital mixer, you will be able to connect to the computer through USB or Firewire instead of dante. If you use VST on OBS, you are applying the effects to just 2 channels (left/right). You can still add some effects for sure, but you will not have full control for all channels like a virtual mixer by using DAW.

@BallastMedia Жыл бұрын

Yes you can use VST plugins in OBS, but essentially, you're just inserting the plugins on your master bus/mix, which while is important, is only about 1/10th of crafting an overall mix. Like I say in the first video of this series, start a road map, what is one thing you can do to take a step in the right direction.

@SangeethKumar-xy6eq 9 ай бұрын

We have allen & heath qu16 how to expand multitrack signal which 60feet, where the live stream audio computer is placed.

@BallastMedia 9 ай бұрын

Unfortunately, the Qu16 doesn't have the capability to add an expansion card, so you'd have to use the USB connection to send audio out to a DAW. USB extenders (e.g. convert to cat cable, etc) are usually hit or miss in their ability to actually sustain data rates needed for audio. Most are made to extend keyboard and mouse, not transmit multi-channels of audio data reliably. *I have not used this product* but I have heard of people having success doing this with the Gefen EXT-USB2.0-LR (amzn.to/48O9jee). Otherwise, another approach would be to position the computer close to your mixer and remote into it for control and send long audio cables for monitoring.

@DbiPro Ай бұрын

If you’re mixing live for a broadcast mute the speakers and use some cellphones to hear what people are actually hearing. Use headphones. Use speakers last. If you use headphones use some ie500 in ear headphones and some cheaper Akg headphones to balance it better

@gregghall2294 11 ай бұрын

Can you elaborate on the "Known Quirk" of the ATEM switchers? Or maybe point me toward information about that? I'm with you on staying D-D rather than D-A and A-back-to-D.

@BallastMedia 11 ай бұрын

forum.blackmagicdesign.com/viewtopic.php?f=4&t=124529 And for some more info. forum.blackmagicdesign.com/viewtopic.php?f=4&t=18474

@curtedgerton 9 ай бұрын

Do you have any further resources or advise related to the content presented around time stamp 11:26? We are desperately fighting the audio volume of our church live stream. We are currently running out of an Allen and Heath SQ 5 into a Black Magic Atem Constellation.

@BallastMedia 9 ай бұрын

What exactly is the issue you are having? Most likely it's not a connection issue, but a mix issue. Have you watched my video on volume? kzfaq.info/get/bejne/fM9mlr2e2K7ae3U.htmlsi=lSO67K7Jgjid7N4U

@adamjohnzon 4 ай бұрын

I am have issues getting digital audio from the AES device into the audio to sdi injector. The analogue avio to my analogue mixer is working fine. Do you know how to trouble shoot this?

@joshuakukubor6575 6 ай бұрын

How do you setup a live stream when am using Wing for front of house and x32 for live streaming

@BallastMedia 5 ай бұрын

Usually you would bring audio in on an AES50 to the Wing from your stage box, and then route audio out one of the other Wing AES50 ports to go to your x32.

@christianpirlet5494 10 ай бұрын

Great video. Lots to think about. The Dante PCIe card is currently 1600. using a USB connection to the computer?

@BallastMedia 10 ай бұрын

How many channels are you running?

@christianpirlet5494 10 ай бұрын

@@BallastMedia About 24 on our X32. Thanks for the reply btw.

@BallastMedia 10 ай бұрын

@@christianpirlet5494 You shouldn't have any trouble running 24 channels through Dante Virtual Soundcard - meaning just over the computer's network card, no need for the Dante PCIe card.

@christianpirlet5494 10 ай бұрын

@@BallastMedia awesome thank you

@nathangoh834 7 күн бұрын

I have a few questions regarding injecting audio via AES. So it looks like you are injecting the program out. Which encoder do you guys use and how would you get that into OBS/Streamlabs? Secondly, is it possible to inject the audio into the converter and into an SDI input of the atem and would that cause a lost of audio quality?

@BallastMedia 7 күн бұрын

Take the SDI output of the audio embedder and run that to an SDI capture device (I like the AJA U-tap SDI: amzn.to/3SiNlJr) I don't think running it back to the ATEM would have the desired effect, because essentially you'd still have the same audio level issues on the output.

@IsaiahFitch 3 ай бұрын

The “enable sync to external” on my Yamaha TF1 is “N/A”. From what I understand it might be a limitation on the devices part. Any idea how to curve this? Is there something I’m missing?

@BallastMedia 3 ай бұрын

What are you using for your Dante switch? Sync issues have been reported if you use a wireless router as your main connection for Dante. Better setup is to connect all Dante devices to a dedicated gigabit switch, and then connect your wireless router to that if you need an access point for control of the mixer, etc.

@briannyamweya7224 3 ай бұрын

Hello ballast can i still attain such an end product with sending 16 audio channels from an analog sound board through a behringer um2 soundcard to a separate pc for daw. How would i go about setting up such a system with what i have

@BallastMedia 3 ай бұрын

Unfortunately, I've been looking at the solution for analog for a while, and every time I do, the math doesn't work out. It ends up being cheaper to purchase a new digital mixer that supports some way of getting audio into your computer/DAW, then trying to come up with a way to bring in a lot of audio channels from analog.

@adamjohnzon 4 ай бұрын

I am have issues getting digital audio from the AES device into the audio to sdi injector. The analogue avio to my analogue mixer is working fine. Do you know how to trouble shoot this?

@BallastMedia 4 ай бұрын

If you're using the BM audio embedder, first thing I would say is to check the switches on the side of the unit. They are very confusing what is actually on and off, and what they are meaning in the manual as on and off. But you'll want to get the AES channel 1&2 turned on to SDI channel 1&2. And make sure in Dante Control you have gone in through the Device Config tab of the AVIO AES and set its sample rate to whatever you're using for Dante's clock frequency.

@chmadhuri5235 6 ай бұрын

Hi , We use soundcraft uir24 which doesn't have Dante. Can you help with it

@BallastMedia 6 ай бұрын

Does it provide each channel output to the USB? You could use USB to send to your computer. That approach does have a few obstacles though. You are limited in the distance the DAW computer can be from the mixer. (USB doesn't do well over long distances) and you will need to figure out a different monitoring/routing solution then what I show in these videos because you can't route back out to Dante.

@Wolfy586 11 ай бұрын

Hello, would you be able to explain the quirk that happens with ATEM audio? This is my first time hearing of this issue.

@TerenceKearns 9 ай бұрын

its probably user error to do with you need to configure the audio input jacks on the minis to be line level instead of mic level (default). also user needs to understand things like audio follows video… also you cant use plugins on individual inputs.

@kevinshanks1434 10 ай бұрын

Is it possible to use Dante Virtual Sound card as your input for OBS on the same computer?

@BallastMedia 10 ай бұрын

Yes, but you need to install the ASIO plugin for OBS. (OBS doesn't support asio by default.)

@garyveazeymission1871 9 ай бұрын

on your diagram of the dante avio connecting to the BMD audio to sdi, is the Avio XLR converting from xlr to 1/4" to connect to it?

@BallastMedia 9 ай бұрын

If you look at my PDF diagram, cable J is an AES xlr to 1/4" cable.

@garyveazeymission1871 8 ай бұрын

we've got all the items in and connected according to the diagram. we're using ableton live. have Dante coming over from our A&H SQ6. I guess I'm wondering how is the output getting out to the BMD mini converter from our ableton mac? I was thinking it would come up in the Dante controller to route it, but it's not. I hope I'm making sense.

@garyveazeymission1871 8 ай бұрын

If this is more in depth, we're totally open to paying you to consult with our church.

@BallastMedia 8 ай бұрын

In Dante Controller, you won't see ableton, but only your Mac as the device. So just like you are routing your audio from the SQ to the Mac, you need to route output 1&2 from the mac to your Dante AES output device. (Then in Ableton route your master mix to Dante output 1&2.) Some people are confused by the fact that they route audio to input 1&2 of the Mac and then output to 1&2 as well. They are not the same thing, they are totally different audio paths. (If you'd like to do a consulting call, I can remote into your machine, I'd be happy to set that up with you sometime, just get in touch with me on my facebook page - linked up in the description of this video.)

@ManuelMartinezM2 4 ай бұрын

So the church I help out has a soundcraft si impact , is it possible to do a live mix on a daw and send it over by ndi from the mix computer to the stream computer?

@BallastMedia 4 ай бұрын

Potentially NDI could work. What DAW are you using? What are you streaming with on the streaming computer?

@ManuelMartinezM2 4 ай бұрын

@@BallastMedia I was going to use reaper, not currently using one. And I’m streaming with vmix

@gamingsanctuary1319 10 ай бұрын

can i just use an aux mix and send my sound through an audio interface to my computer and streamlabs?

@BallastMedia 10 ай бұрын

Yes, you can.

@Pastortonyvinasoficial Жыл бұрын

How I can get in contact with you to speak with you

@BallastMedia Жыл бұрын

Best way is to go to my ballasmedia Facebook page that is linked in the description of this video and send me a message there.

@microdoulo2250 Жыл бұрын

I saw this video and I but Dante Avio AES3 for digital but for some reason don’t work! How can I use adapter aes3 Dante how many I need?

@BallastMedia Жыл бұрын

Are you powering the AVIO with a POE switch?

@microdoulo2250 Жыл бұрын

Yes but I use only one Dante avio AES3 plus two analog and one use avio when I connect I don’t see how transmitted o receive audio. I use iMac Pro with Dante sound card to AES3, only the analog work! I don’t know why don’t work

@BallastMedia Жыл бұрын

@@microdoulo2250 What device are you connecting the AVIO AES device to?

@timjohnson8328 4 ай бұрын

Similar issue. I wanted to use 4 aes ebu channels to embed with the mini converter but can only get one channel to send audio.

@PeterVCook Жыл бұрын

How much of this could be done with MADI?

@BallastMedia Жыл бұрын

Sure, you could use MADI if you're console has that interface already, you could use something like this to bring your audio in to the DAW computer amzn.to/3J6V60B

@TerenceKearns 9 ай бұрын

reaper is a great choice because its cpu efficient, its windows, linux, and mac compatible, it’s inexpensive, and its not protools 😂

@ernomon9873 4 ай бұрын

Hey there. We don't have instruments. We only sing accapella. Our main issue is that we can't hear the audience singing, or when we have Bible class, our people on line can't hear people's questions that are asked or answered. 😢

@BallastMedia 4 ай бұрын

Do you have audience mics?

@ernomon9873 4 ай бұрын

@@BallastMedia not at the moment, we're just in the process of putting together so that we can accommodate audience mics. Any recommendations?

@BallastMedia 4 ай бұрын

@@ernomon9873I like the Rode NT5 (amzn.to/4cesUWj) but the M5 also works well for half the price. (amzn.to/4csm2VN). Check out my video on audience mics! kzfaq.info/get/bejne/qLWDdNyex93Xc40.htmlsi=Ogi19QkgGFF9g05l