HOW I BUILD MY EMULSION STYLE SHOCK | PRO TIPS BY DAVID RONNEFALK
Рет қаралды 18,242
4 жыл бұрынHEY THANKS FOR WATCHING! DONT FORGET TO LIKE, COMMENT AND TO HIT THAT SUBSCRIBE BUTTON!!!
ALSO SMASH THAT BELL BELLOW THE VIDEO AND YOU WILL BE NOTIFIED WHEN MY NEXT VIDEO IS UP!
BELOW YOU ALSO FIND THE LINKS TO MY OTHER SOCIAL MEDIA ACCOUNTS! SEE YOU IN THE NEXT ONE
HB Racing | Performa | Highest | Absolute Hobbyz | Arrowmax | XTR | Neobuggy.net |
Homepage: www.davidronnefalk.com
Facebook: / davidronnefalk
Instagram: / davidronnefalk
Twitter: / davidronnefalk
@krzysiekbazkow 3 жыл бұрын
Bardzo ciekawe ,wypróbuję ten sposób Dzięki i Pozdrawiam
@royarsey5429 3 жыл бұрын
i'm a fan after you won @ Las Vegas IFMAR nitro racing..then decided to get HB-truggy & buggy..good luck on coming racing event,
@ioandragulescu6063 Жыл бұрын
I have some external shock limiters on my very cheap losi plastic shocks :) Should I remove those before refilling and bleeding? I would think that with those on, I wouldn't be able to push the piston all the way in.
@OICU81B4-c8o 4 жыл бұрын
Finally a video!
@davidronnefalk 4 жыл бұрын
jason bucao Yeah right, it’s been too long!
@nyej25 3 жыл бұрын
What is the part number for these o-rings? I need them.
@TheRCNetwork 4 жыл бұрын
Looks good, DR!
@davidronnefalk 4 жыл бұрын
Thanks!
@CarlosDelaoGunEngraver Жыл бұрын
where did you get the shock oil?
@amongt2 3 жыл бұрын
Great video..have you got part Number? I Need to try emulsion on my new e819rs coming Next week and basing on your anither video i think they Will work on a track i have to run on September. Thanks
@joeemanuel6813 3 жыл бұрын
AMoN HB-204671 is the part number
@davidronnefalk 3 жыл бұрын
Joe helped you out on this matter I saw. Hope you enjoy the car👍
@Moto619films 4 жыл бұрын
Any update on d418 shock Owings for the caps
@davidronnefalk 4 жыл бұрын
Robert Romano They will be coming as well!
@redcoffee_ 4 жыл бұрын
What is the advantage and characteristic of emulsion style shock?
@davidronnefalk 4 жыл бұрын
I will make a separate video talking about this once I have published the Performa Cap video.
@stefanschneider7568 4 жыл бұрын
When you build emulsion shocks, do you let the air out of the oil before putting the cap on it?
@davidronnefalk 4 жыл бұрын
If I have time I let them sit so all the air goes out. Sometimes I'm in a hurry and then I don't bother making sure 100% of the air is out. However I want as much air as possible to be out of course for a more consistent feel on the track!
@stefanschneider7568 4 жыл бұрын
@@davidronnefalk thank you for your reply 😉👍🏻
@xxCusco 3 жыл бұрын
What emulsion shock caps do you run on the D418?
@davidronnefalk 3 жыл бұрын
I have used the plastic caps. We are working on some new aluminum caps for it too which will be similar to the volume of the plastic ones. I think the car handles better with those👌
@williamsing8975 4 жыл бұрын
When or why you change from the performa blader to the emulsion?
@davidronnefalk 4 жыл бұрын
William Sing I will post a separate video of that after I have posted my next video which is going to be building shocks with the Performa Caps👍
@williamsing8975 4 жыл бұрын
@@davidronnefalk thanks. You should do another video of the racetrack you were building.
@GOLDOPERFECTION 4 жыл бұрын
What's the o-ring size or any part number?
@davidronnefalk 4 жыл бұрын
They will be released shortly.
@nebaartur 4 жыл бұрын
I really missed you video. What dimension of O-Ring?
@davidronnefalk 4 жыл бұрын
Nebojsa I missed doing them! I don’t know what size they are, haven’t measured them. We are just testing some different ones to see which ones to produce👍
@joeemanuel6813 3 жыл бұрын
David Ronnefalk I’ve just got the emulsion o-rings from hb racing for my car 👍
@JosePerez-cw5rl 3 жыл бұрын
mas vidios de el e819 eco David
@daijoubu4529 4 ай бұрын
That's not how one uses an o-ring, it would have to sit at the bottom of the threads, what you'll want in this case is a flat washer at the top of the cap if you're not using a blader
@pimxgaming2568 3 жыл бұрын
the homepage you have dosen't working :(
@davidronnefalk 3 жыл бұрын
Try again, should be working again ;)
@nathanstrong4359 3 жыл бұрын
I’m still learning, so cut me some slack on this... It seems like other sources say you want rebound, yet you say you want NO rebound. I’m confused about the disparity here.
@joeemanuel6813 3 жыл бұрын
Nathan Strong on emulsion you don’t want any rebound the idea is on a bumpy track the shocks absorb the bumps better and the car rides smoother. Also on jumps the car won’t jump back up
@davidronnefalk 3 жыл бұрын
In my 20 years of driving 1/8 offroad I've never liked running with rebound in the shocks. Could be personal preference but the car is easier to drive like this👍
@davidronnefalk 3 жыл бұрын
Good points👍
David Ronnefalk
Рет қаралды 9 М.
Ryan Lutz
Рет қаралды 26 М.
ФуЖур (Футбольный журнал)
Рет қаралды 336 М.
Hardcore Fighting Reality Show
Рет қаралды 544 М.