The Most Powerful OptiPlex Ever

Рет қаралды 367,358

2 жыл бұрын

I built a top of the line OptiPlex gaming sleeper and it turned out awesome.
Thanks Microcenter for sending the motherboard:
New Customers Exclusive - Get a free 240gb SSD at Micro Center: micro.center/94bb37
Motherboard link: ASUS Z690-G ROG Strix Gaming WiFi DDR5 Intel LGA 1700 microATX Motherboard: micro.center/8324ef
Full Specs List:
CPU: Intel i9 12900K
RAM: 64 Gb Of Corsair Dom Plats DDR5 @ 5200Mhz
GPU: Nvidia RTX 3080 Ti
Mobo: Asus Strix Z690M
PSU: 1000w ThermalTake Toughpower G1
SSD: 1Tb Patriot Viper VPN110
Cooler: Noctua NH-U9
Get some AWESOME Dawid merch here: dawiddoesmerch.com
-Here is a link to my Patreon page, it would be awesome if you check it out: / dawiddoestechstuff
Follow me on whichever Social media you don't hate
Discord: / discord
Twitch: / dawiddoestechstuff
Twitch shorts channel: / @dawiddoestwitchstuff1128
KZfaq: / dawiddoestechstuff

Пікірлер: 1 000

@WayStedYou 2 жыл бұрын

Weird OptiFlex, but okay.

@voduz999 2 жыл бұрын

This ratio is weird, but okay.

@leftturnsmatter7555 2 жыл бұрын

Love that lmfao

@alexmaldonado2804 2 жыл бұрын

Damn, nice one

@PingoPiper 2 жыл бұрын

😍😍😊😊😖😖

@4xbuu 2 жыл бұрын

@@voduz999 L

@OzTalksHW 2 жыл бұрын

The internals stink, but man can that seller mod an office PC haha. One of the blessings of these optiplexes was that they supported standard mATX form factors. Great for, and I quote, "Linus-ing the crap out of it" 😄

@losingmyfavoritegame8752 2 жыл бұрын

Hey, Oz! :D

@richardbrown8452 2 жыл бұрын

love your channel Oz you make great content man gave me the courage to build my own 800 dollar pc lol

@AlcyoneHere 2 жыл бұрын

2 Legends

@leafyclass 2 жыл бұрын

oz :D

@adil-blue-blood7626 2 жыл бұрын

Mr oz we are the budget pc people and Mr Dawid trying to put the hulk and the skin of Justin Bieber

@asandberg6 2 жыл бұрын

Placing a 120mm fan where you removed the HDD cage will vastly improve temps.

@MeddyMurphy 2 жыл бұрын

i was thinking exactly the same!

@tagesvaterpatrick8780 2 жыл бұрын

A nice NFS 12 might suffice 😉

@hellooperator6639 2 жыл бұрын

I saw in another video where the front can fit a 140mm fan. Also, there's a small vent on the side panel that might fit a 92mm fan. There's no way to mount it though without either drilling or praying tape will hold it. I wonder what the temps would be with both of them added and what configuration of push and/or pull would be best.

@professorjack2099 2 жыл бұрын

@@hellooperator6639 I went the hackjob route and hammered a hole through the front. That sheet metal is some flimsy warpy stuff that will cut you easily. I regret my decisions :( technically the easiest route would be a pcie fan card or a reference cooler gpu

@WanderfalkeAT Жыл бұрын

A 120 Watercooler Solution would probably help much more for the boiling CPU!

@Pekeliini 2 жыл бұрын

Would be really interesting to see how temps could be improved with some dremeling the fan grill at the back and dremeling some of the metal away in the front and putting a 120mm fan to push air in.

@EthanH1 2 жыл бұрын

@jackthegamer I doubt that would fit. If it did a better cooler would be possible, but Dawid is saying it’s not.

@alherch 2 жыл бұрын

I was thinking the same thing, get that dremel going and cut some more of the case!

@baroncalamityplus 2 жыл бұрын

Agreed. The right fans would make a world of difference for the thermals in that case.

@Ji-oo1tt 2 жыл бұрын

@jackthegamer that's the setup i have, although my mobo is stock with a 4790 and 3060

@yorchli3152 2 жыл бұрын

There is a video from The Game Bench channel where he shows how to add a 140mm fan to the front, very detailed and informative. It's called Adding some airflow to a dell optiPlex

@cookie7993 2 жыл бұрын

I like how micro center is so good that people honestly don’t even need to be sponsored by them to recommend them. They’re just great.

@Majima_Nowhere 2 жыл бұрын

It just sucks that they're not more widespread. The nearest one to me is 110 miles away, 2.5 hours + Boston traffic lol

@DaltonTk423 Жыл бұрын

Micro Center shines where Fry's Electronics failed. I hope they take over the old Fry's locations on the west coast.

@pandemicneetbux2110 Жыл бұрын

@@Majima_Nowhere Came here to say this. In USA it's a more West Coast thing and obviously not everywhere in Europ--hey. What do you Euros do for PCs? Because I seen some funny s&%$ in German. Outrageously priced office PCs, literally dell optiplex tiers for crazy prices I just didn't know if those sites were like, mainstream, or it was some weird slumming experience. When you're new to the area you tend not to know which streets to go down and which ones to avoid, so you tend to find things completely at random that are hidden gems or being knifed and robbed by a GT 450 wearing a "1060" mask.

@thundershadow Жыл бұрын

I miss compusa and I miss fry's. There is no micro center here in Nashboonies. And I miss javanco (the old one).

@desktopstu4145 11 ай бұрын

This comment is sponsored by Microcentre

@TheStarkster90 2 жыл бұрын

I've had to remove the HDD cage from an OptiPlex before, and it's just easier to remove the side and front panels and drill out the rivets to be honest. No dremeling required.

@davidsnyder2068 2 жыл бұрын

Agreed. Titanium bit with high torque to drill out the rivets

@Incommensurabilities 2 жыл бұрын

@@davidsnyder2068 I managed it with a cheapo drill that had a worn out battery, so it's totally doable with a basic drill 😅

@DawidDoesTechStuff 2 жыл бұрын

I did drill out all the rivets but the the cage was attached to the frame with glue or solder. 😁

@TheStarkster90 2 жыл бұрын

@@DawidDoesTechStuff I feel like you might be right. It's been a year since I did my OptiPlex case mod (should do a sleeper build with it to be honest), so you could be right that Dell pulled a Dell. I just feel like I did something that ended up easier than dremeling or going HULK SMASH on it (I don't have a dremel, so that's why I say that. 😂)

@DawidDoesTechStuff 2 жыл бұрын

@@TheStarkster90 To be fair, I do default to hulk smashing faster than most people. I wouldn’t be surprised if there was a way to do it more gracefully. 😂 All I can say is I definitely got all the rivets.

@Ruisu4 2 жыл бұрын

You should make a reverse sleeper build where you put dell parts in an awesome case with cool rgb

@SSJfraz 2 жыл бұрын

Or alternatively, you could just buy a Dell "gamer" PC.

@joefish6091 2 жыл бұрын

Who pays for the waste of time and resources ? wally world or BB PC

@Ruisu4 2 жыл бұрын

What? I just think it would be an intresting video to see how far you can push a dell system with good cooling and to see if he could fit a strange motherboard into a standard case

@DawidDoesTechStuff 2 жыл бұрын

That’s already happened. Check out the Alienware video. 😂

@yourforeignlocal 2 жыл бұрын

6:48 The way it lights up is magic

@Obie327 2 жыл бұрын

Dawid!, Very nice sleeper pc! I was very excited to see you get this done! I find cramming new parts in pedestrian boxes to be pretty cool. Thanks man for fun build!

@ahmed-0775 2 жыл бұрын

The reason for the high temps is not the cooler itself but the airflow, you habe no fans for intake at all. I would've tried to fit 2 fans in the front to prevent the airflow suffocation.

@kyles8524 2 жыл бұрын

i got one of the new hp pavilions gaming computers and it only had an exhaust fan and was causing the gpu to get hot.luckily on those the grill on the side sits right over the gpu and i was able to install a fan that blows air directly at the gpu.

@ahmed-0775 2 жыл бұрын

@@kyles8524 wp on that! Most of these Dell prebuilts dont even have intake fans at all

@jamesgodfrey1322 2 жыл бұрын

yes look at case you could very easy add in a intake fan or two and I like to see that

@Robemcla 2 жыл бұрын

While air flow is definitely an issue, he is using an NH-U9S chromax.black. If he was going to use an air cooler he really should be using an u12s/u12a. That is about the largest you can go with that board.

@taunteratwill1787 2 жыл бұрын

Airflow? The side of the case was open! How much airflow do you want? 😃

@abqalhamairi 2 жыл бұрын

I have no idea why your channel is not exploding! You are such an underrated top-notch content creator. I hope people start realizing soon your true worth.

@pandemicneetbux2110 Жыл бұрын

I thought it did explode??? Dawid is one of the most well known tech channels isn't he? I think of him as being like just under Jayztwocents, Linus, and HWUB for the tech channels. 863k views is not "underrated" ?

@surfx4804 2 жыл бұрын

Tip: Use tinsnips where you can rather than a dremel. Putting tiny metal dust inside a PC case is not a good idea.

@DawidDoesTechStuff 2 жыл бұрын

That’s a good idea. I’ll get a pair of those.

@RichieBlaze1 2 жыл бұрын

Finally, a proper build that matches the case's aesthetic! 👍

@DeepDownInTheOcean 2 жыл бұрын

Bruh, I went and fixed something to drink and as soon as I left a video was posted (11 mins ago for me). TY for the content Dawid!

@sadc3623 2 жыл бұрын

BRUH IKR, lol.

@jamescartez9969 2 жыл бұрын

I love dawids vids, it so like Christmas came early when he uploads often.

@timalexander746 2 жыл бұрын

Love the video as always Dawid! Do a quick mod and get a 120 / 140 fan on the front of the case pulling some more air in to aid cooling! As we would say in the uk "jobs a goodin" :)

@wilsondavenport6939 2 жыл бұрын

i did a sleeper build in the same case and i used jumper cables for bread bords on the power connector to make it work

@zzzlamont 2 жыл бұрын

Dawid your content has improve substantially good job!

@richardirvine2220 2 жыл бұрын

What A beast config. That was fun to watch. Thanks man.

@CESAR_H_ARIAS 2 жыл бұрын

Dawid Build expectations at the start of the video: High! Expectations after seen his splicing, soldering finishing skills: way downtown!!! After the specs reveal after looking at that CPU cooler I said: really? Lol, after temps imo it need some Dremel, a noctua industrial 3000 rpm fan placed into that front and a better cooler

@NoobSniper 2 жыл бұрын

Awesome upgrade! I would be curious to know how much of a difference 2 fans in the front as intake would make, temperature wise 🤔

@gavinendsley 2 жыл бұрын

2 won't fit, but you can fit 1 140mm.

@BelowAmbient 2 жыл бұрын

LOVE THIS VIDEO... its been decades since I've seen anyone bust out a drill and dremel for any pc mod... KEEP IT UP!!

@Doggo_Norse 2 жыл бұрын

These videos are so addictive, keep up the great work man 👍👍

@samhicks7430 2 жыл бұрын

This was the best. Love the sleeper. The hard drive cage removal was fantastic!

@reikisano4542 2 жыл бұрын

Oh man, I wonder how would the temperature be if Dawid added a couple of intake fans and swapped out the crappy stock fan in the back with a good one. That should alleviate the temperature a bit, even before replacing the Noctua cooler for a stronger one.

@zeroturn7091 Жыл бұрын

I thought about replacing my rear fan, but I read somewhere that you want to build up positive pressure. A exhaust fan may bring the cabinet to equilibrium or negative pressure.

@losingmyfavoritegame8752 2 жыл бұрын

The internals look great! I love the look of this sleeper. :-)

@2LoudTech 2 жыл бұрын

Super dope idea. I am surprised that the internals did not reach the temperature of the sun.

@AnnaDoes 2 жыл бұрын

Haha same here!

@eviljohn 2 жыл бұрын

It looks a 120mm AIO would fit in there. It might fix that CPU heat problem. Love the build, great job!

@zalankhan5743 2 жыл бұрын

Or just using a 12600k or 12700k

@JobeStroud 2 жыл бұрын

Those are 80MM fans.

@eviljohn 2 жыл бұрын

@@JobeStroud i mean, he still has the dremel.

@budgetbiker7 2 жыл бұрын

Air coolers are actually better in most situations than an AIO, mostly when it comes to sustained thermals

@ggesdsdsdsd 2 жыл бұрын

@@JobeStroud 92mm

@fazlymawlarafi9331 2 жыл бұрын

Next, do it with a SFF Optiplex and fit a RTX A2000 GPU into it, the only low-profile, slot-powered card from Nvidia that has RT cores in it.

@Cytro 2 жыл бұрын

yes please

@gavinendsley 2 жыл бұрын

I would love to see this in an SFF case.

@oldguy9051 2 жыл бұрын

You have to check first if the Optiplex MB support RTX-cards which not all do.

@Arthur_Lake 2 жыл бұрын

your youtube has helped me so much in the passed in what to buy in pre builds and honestly any computer things things you for the content

@busterscrugs 2 жыл бұрын

Sleeper PC's are the move. This has to be the most gangster OptiPlex on the planet.

@dabmaster2311 2 жыл бұрын

love the videos dawid keep doing your thing!

@Stelio_Contos 2 жыл бұрын

I did the same thing, but I actually put a 120mm intake fan in the front to keep temps down. The temps are in the 60/70's °C.

@Pratik_Sanyal 2 жыл бұрын

It's like writing the same age-old answer but adding bulletins to get extra marks for good presentation, but then the home tutor added some points by himself and made it outstanding.

@techjgboy8878 2 жыл бұрын

Awsome video and love the build you did how you did it

@mruczyslaw50 2 жыл бұрын

Back in the days when dell parts were actually replacable instead of having one single mobo and power supply model on the planet that would work

@SyntaxTurtle 2 жыл бұрын

Those Optiplex mobos and PSUs are proprietary though. They use a smaller (12? 16?) pin power so you need a matched set. Though you can get a new PSU and buy a third party adapter for $15 or so which is what I had to do to put a GTX 1080 into my kid's system.

@mruczyslaw50 2 жыл бұрын

@@SyntaxTurtle 1:18 you can see that this mobo has standard 24pin ATX connector

@bigdog6286 2 жыл бұрын

That looked like a lot of fun. I would love a setup like that.

@Rpground 2 жыл бұрын

Honestly, just the case alone is sexy enough that I'd consider buying it. Wish you could just get the case by itself.

@BikersandBags 2 жыл бұрын

I absolutely love this PC! New subscriber and really enjoying the videos!

@increasewill4254 2 жыл бұрын

Investing in crypto now should be in every wise individuals list, in some months time you'll be ecstatic with the decision you made today.

@eviefrye5804 2 жыл бұрын

Yeah, My first investment with Mr Luis Victor earned me profit of over $25,530 US dollars, and ever since then he has been delivering

@daisy.p8160 2 жыл бұрын

He has really made a good name for himself

@user-yd8jq5dy2w 2 жыл бұрын

Luis Victor has been managing my trade for months and I keep making profits every week, I made $9,130 last week

@zadockqr.....427 2 жыл бұрын

😷😷†𝟏𝟐𝟑𝟏𝟕𝟒𝟓𝟓𝟑𝟖𝟓

@zadockqr.....427 2 жыл бұрын

His availability is on WhatsApp👍

@paulschottke948 2 жыл бұрын

I've just bought this same Optiplex case and will do this myself because this is awsome. Thanks for showing how to do it and giving this great Idea.

@scrumpadooshes Жыл бұрын

how did it come along?

@joechen7887 2 жыл бұрын

5:37 the fact that Dawid mounted the heatsink upside down, is just a face palm moment. But then I remember the whole computer was a facepalm worthy piece of junk beforehand and I'm ok with the heatsink.

@airhumidifier1235 2 жыл бұрын

the top m.2 slot on that motherboard is in the opposite direction from what is usually seen on motherboards, the ssd heatsink was preinstalled so its not his fault but yeah still hillarious

@thephoenixking1086 2 жыл бұрын

I mean he may have done it as a joke hah

@DawidDoesTechStuff 2 жыл бұрын

Have you never used an M.2 slot before? 😅

@thephoenixking1086 2 жыл бұрын

@@DawidDoesTechStuff I never thought about that, I thought it may have been a joke hah

@DawidDoesTechStuff 2 жыл бұрын

@@thephoenixking1086 Haha!! To be fair, I didn’t even realize it was upside down.

@InfectedChris 2 жыл бұрын

That stripping around 4 minutes in really had the best music to get any techie into the mood.

@janekk916 2 жыл бұрын

please more videos like this, its awesome!

@thealandude9146 2 жыл бұрын

I friggin love seeing sleeper builds

@TheMike90a 2 жыл бұрын

I love sleeper builds! More please!

@rodrigoferreiramaciel4815 Жыл бұрын

What a beautiful case

@robot5663 2 жыл бұрын

I love that this case got pimped, I really hope you are keeping this bad boy like this too

@ericcardinal4788 2 жыл бұрын

I really like that case for some reason. I can not explain why I like that case so much. Great content as usual

@georgerr335 2 жыл бұрын

been a sub since around 120k... really good to see you going after half mill. akwats knew from the first day I found out your channel you would get half a mill subs soon... I bet by 2023 you will be around 800k going for the mill.

@heistbmx4904 2 жыл бұрын

Love the sleeper pc good vid

@davidjdunham Жыл бұрын

i LOVE the look of this thing.

@Bass_therapy_ 2 жыл бұрын

Yessss I’ve been waiting for this video.

@TheDodgeAZ 2 жыл бұрын

My fav cpu channel, I love doing stuff like this too

@JPPRODUCTIONSYT 2 жыл бұрын

I always love watching these videos. It's entertaining and I always come back for new uploads or watch old ones. Keep it up! Think this is my first comment on the channel. Ive been subbed for about a year now.

@WELSHYTECH 2 жыл бұрын

Awesome keep the videos coming

@802Garage 2 жыл бұрын

Dawid, feel free to ignore me if you know all of this, but you could get some depinning tools or get created with home solutions. Basically, you could remove each pin from that Dell connector and hook them up one by one like a lot of cases come with individual breakout pins. You could also either buy the individual pin sleeves or just put some heat shrink tubing around them for protection from accidentally touching. Really fun build!

@DonaldMolter 2 жыл бұрын

Dawid flexing his muscle by ripping that drive cage out 💪🏻

@AnnaDoes 2 жыл бұрын

My man 🤣

@Daves-Corner 2 жыл бұрын

Its always a good day when Dawid puts out a new video!

@Gen3DTech 2 жыл бұрын

Dawid you are my Hero!

@OhNoItsDad88 2 жыл бұрын

Love this!!

@perrymcclusky4695 2 жыл бұрын

The computer didn't explode and Dawid didn't die = successful video. Thanks for doing this OptiPlex gaming sleeper build. I appreciate it.

@bm1066 2 ай бұрын

Thats a cool little case

@DizzyBoi915 2 жыл бұрын

Dawid's analogies are always top notch. I can't even begin to think of any of them LMAO

@hellooperator6639 2 жыл бұрын

I'm going to be doing the exact same thing and was wondering if that Noctua CPU cooler would fit in an Optiplex case. I couldn't find any examples, so I gave up looking. Then I stumbled on this video and you've confirmed that it does. Thanks! I'll never be tired of seeing Dell and HP office computers being recycled into gaming PCs.

@andrewsgarage796 2 жыл бұрын

Wow awesome mate, gotta love my Dell Andrew

@NightMotorcyclist 2 жыл бұрын

Them putting a Micro Center 10 minutes (by public transit, less when driving) away from me was a blessing and a curse. I find myself going there one to two times a month just to pick up stuff or browse any new releases.

@MrMorphix13 2 жыл бұрын

I saw one of these things in the wild, when a customer brought one in for servicing. Its SSD was dead less than a week after purchase. People were definitely loving the mirror and RGB lights, at least

@HappyBeezerStudios 2 жыл бұрын

personally I'd prefer having a status display instead of the mirror. they used to sell them combined with fan controllers.

@corneliusantonius3108 2 жыл бұрын

I am glad you joined the Optiplex Master Race 😁

@DavidAshwell 2 жыл бұрын

When you rip the front drive cage out, you can fit a 140 in the front - I let mine site at a slight angle upward with Noctua rubber feet.

@ZachDxn 2 жыл бұрын

These chassis were actually fantastic for an everyday work PC. I kinda miss these.

@OptimalMayhem 2 жыл бұрын

This is a pretty awesome computer now, lol. Unique in absolute absurdity but legitimately badass. I love it. Would love an update with a better CPU cooler to unlock its full potential. I'm sure you often tear these down to reuse parts for future content but this thing is daily driver worthy :p

@Fly_By_Gaming 2 жыл бұрын

Dawid and his nice opti checks out!

@MisterResistance101 2 жыл бұрын

Man I would seriously love to buy that OptiPlex wow.

@iireflexii7756 2 жыл бұрын

The way you word your sentences is amazing! :)

@jkorotkiewicz 2 жыл бұрын

Please try the Igor's lab "lga1700 washer mod" onto the motherboard and check if temperatures will drop a bit!

@tilen3266 2 жыл бұрын

What makes the day better then some dawid content

@Wigglythegreat2 2 жыл бұрын

That cpu cooler is quite good despite it's size. It saved many a small case from thermal throttling the CPU. I used one myself in an Omen case and that was the best cooler that would fit. It made a huge difference over the stock cooler. It was able to cool an i7 in a cramped case, but asking for it to cool a new i9 is asking a bit too much of it. I do love your ambitious approach though. 😃

@hoopla5502 2 жыл бұрын

Ive been waiting for this video since the first video with that gloriously goofy case

@fadedplague3198 2 жыл бұрын

So freaking clean. I love the look of this one and all that power. My computer can't keep up lol 🙃

@deterlanglytone Жыл бұрын

I got this model optiplex. Had it with the same CPU set up as it started out. I did not get a graphics card mind you but still. I actually just really liked the look of the case, so now its a Ryzen 5 build. After a few years I just swapped out the motherboard and it was my first time doing any of that. I ran into the same power button connector issue. Just brought a new cable with a little button attached and used a 3d printed area in the second expansion bay for a new power button to set. Which I wouldn't do again but still. It was pretty easy.

@zeroturn7091 Жыл бұрын

The power button is an easy issue to solve. I also did a Ryzenplex, it’s on my channel.

@BuzzKiller23 2 жыл бұрын

I'm genuinely excited to see a new high end mATX board.

@DawidDoesTechStuff 2 жыл бұрын

I know right!

@matasa7463 2 жыл бұрын

Whoa, and Micro Center sponsorship, what a flex!

@blackviper7797 2 жыл бұрын

"Why are you so strong?!" Optiplex hard drive cage: My powers are beyond your comprehension.

@tj71520 2 жыл бұрын

Very nice OptiPlex

@GeeboatsCollects 2 жыл бұрын

"Linusing the crap of it" was by far the best line in this video! Systems pretty fun too

@ekroopsingh7045 2 жыл бұрын

I like the way when dawid said it would be a nice little upgrade🤣🤣🤣

@christopherbickell3258 2 жыл бұрын

Literally 2 words into the video - “trouser-tightening”. Classic Dawid.

@indridcold2840 2 жыл бұрын

This is the _David Carradine_ of Dell Optiplex, looks ok on the outside but is secretly in constant danger of fatally choking itself out.

@ShawnJonesHellion 2 жыл бұрын

I grew up in the 90s going into microcenter unable to afford anything but feeling like a kid in a candy store. When people ask about where I'm from I forget to tell them we created the world's best technology store.

@matthewmcsparren7534 2 жыл бұрын

I want to see a whole series on the romancing of Dawid and Micro Center!

@JoeeeBoyPlays 2 жыл бұрын

Dang, I want to buy myself that sleeper. It looks really nice for working on spreadsheets.

@justinbouchard 2 жыл бұрын

That cooler blows my mind. I run my 4790 at around 115 watts, peaks at 128 ish sometimes with a liquid freezer 280 on it. My temps are about mid 70's peak with. You running at 140 watts and 80-90 celsius freaking amazing to me!!!!!!!!!!!!!!

@DeathlyPrice 2 жыл бұрын

Sure, the Optiplex is Old enough to not have Proprietary Motherboard Disease, but it's also NEW enough to not suffer from having Dell's BTX Motherboard Disease from the mid 00's.

@neto9217 2 жыл бұрын

I mean honestly, for basic gaming. These OptiPlex machines kick butt. I still recommend these to people starting out because it is the whole package for around $200-300. I definitely wouldn't label these as gaming PC's but they are definitely capable of gaming.

@darionerdmann6928 2 жыл бұрын

i have an optiplex sleeper myself, with a 3800X and a Titan X in it and modded it to fit a 120mm fan in the front. Works really well, it does make a great sleeper. and the temps on my system are fine

@zeroturn7091 Жыл бұрын

How are you cooling your CPU? My 5600X is a volcano.

@darionerdmann6928 Жыл бұрын

@@zeroturn7091 with an Noctuha NH-U9L, works great

@the4xgamer765 2 жыл бұрын

So this is Dawid Tech Tips

@cloak679 2 жыл бұрын

your vids never failed to entertain me, i would love to see you trying to find a wish prebuilt, so you will be done finding all your prebuilt sites

@jurajkovac1770 2 жыл бұрын

Dawid should put 1 or 2 fans behind front panel ventilation and dremel out the metal mesh to further improve airflow, that could be topic for next video

@d.r.1402 2 жыл бұрын

I have the same case, you can get the aftermarket power supply out, but it takes a bit of finagling with the side case lock. You have to slightly unclamp it from the slide rail at an angle carefully so you don't break the plastic.