Yep 100% that rifle would give me the shits.

I heard that said also and rolled my eyes! I have since 1978 been a professional hunting guide with work in Alaska offering Brown bear hunts & Yukon Moose hunts. If I had such a garbage rifle as that 303 I would be dead today. I build to sell custom rifles and my AR 10s do not get handed over to the buyer into they have been shot repeatedly to check functioning. Even my AR 10 rifles in the WSM magnum chambers do not fail. My own AR 10 I hunt with is chambered in 375-300WSM and all the bugs are worked out so as fast as you can stand to pull the trigger it cycles those Hugh 375-300WSM cartridges,

@@Lure-Bensonthat’s not a 303 it a 308 made by a company called AIA they were built copying the no4 action, I’ve used Enfield rifles for years never had issues like that, never used a AIA so not sure what’s going with his rifle

@@vasilisouris4853 You need to take a closer look at the PPU loaded ammo because those aren't 308-win ammo. Those are long round nose bullets and even the 303 cartridge is apparent from the rim and tapered case. If you want to insist those are 308 cartridges from your gun experiences from playing video war games have at it.

😂😂 hell I have issues with my new ones ... But old guns hold up to a good beating.... Theses new ones will break at the plastic stock ot shake so hard the optic fudges up 😂😂

Cats are all over Australia these days doing so much damage. They can survive some of the harshest places.

Check out the Cat Man of Australia.

Well spotted! You are the first to pick it! Would you like a Jack Out The Back hat?

@@jack_out_the_back lol I noticed that little trip as well. Was concerned your rifle had gotten full of sand. I actually thought that camel might kick you when you fired from your position right behind him. I'm in the US and just found your channel. It looks like the 7.62/308 is doing just fine on the camels. I thought the Springfield M1A SOCOM in 308 would be nice for this type of shooting but it may be a tad heavier than your AIA. I use the Vortex Crossfire II Scout 2-7x32 on mine for Coyotes here in Colorado. Another scope I use is the Leupold VX -Freedom 1.5-4x28mm Scout. Enjoyed the video.

I believe he has a new rifle coming and another in the shop for repairs. This is the backup. And to prove a point that WA needs better gun laws for pest control.

Yeah I'm tentative to file the feed ramp, but I have ID'd it as a problem. New magazines for this platform are tricky here, being an M1a/M14 type. I'll take them apart and see what I can do. Yep, round nose would feed a lot better.

Some tweaking of the feed lips to change the presentation can help a lot to. The answer isn't always feed ramp. My old .22 pistol has no feed ramp. The magazine feed lips control the cartridge presentation. That was a good learning experience. I don't file lips, just bend them.

More like super Mario LOL

As a custom rifle builder and since 1978 a professional Alaskan hunting guide you make the same ignorant mistake as all others who are ignorant about firearms. Accuracy isn't made by the cartridge and the 308 isn't any more accurate than any other cartridges. It takes quality made barrels - ridged actions - quality machining to make barrels and precises made actions to get accuracy. It also takes quality bullets - brass - primers and types of powders that make good accuracy or bad accuracy. For example, people like you with about zero experiences in quality guns and ammo like to say the 7.62x39 Cartridge is a bad accurate cartridge but when fired from rifles like the CZ carbine or the Ruger bolt rifle or from one of my AR 15s using a Pac Nor super match barrel the 7.62x39 cartridge becomes accurate to win shooting matches. Another cartridge if talked about by ignorant fools like you who would call it an inaccurate bad cartridge would be the 6.5x50 Jap but I am chambering Pac Nor super match barrels in 6.5x50 Jap for the AR 10 that if I ever shot in a match shoot I would either win the match or be in the top shooters. With factory Norma or PPU ammunition my AR 10s I chambered in 6.5x50 jap can easy shoot at 200 yards 1/4 inch groups. Another factor in accuracy is High end chamber reamer I get from Pacific Tool & Guage. Using one of the AR 10s in a 300 WSM or 325 WSM on those Camels would be total hell on them! The AR 10 - 20 round magazine holds 9 WSM magnum cartridges. When hunting with my own AR 10 in 375 - 300 WSM magnum I am loading 6 cartridges in a 20-round magazine and that is way more than needed with the 375 - 300 WSM is an identical match to the 375 H&H magnums for power.

​@@Lure-Bensonfuck me, then it's true, everything is bigger and better in 'merca, even the replies

​@@Lure-Benson I think you are the one who is ignorant about what is being done here, it is culling, it is about numbers, no one is using match rifles with custom reamers, or shooting WSM cartridges. Most culling is done with a 308 because it does the job and is relatively cheap to run when you are shooting hundreds of animals per day not guiding hunters to one animal a day.

@@ntdanny Well Ghee what else you want to tell me I already know this is culling not hunting and not guiding! If you knew anything about actual firearms not what you learned from playing those Video war games - you would know something about reloading ammunition that is cheaper than buying loaded ammo. with you Not having any at all hands-on experiences with firearms I have to tell you those Camels far out there looking back at the sounds of shooting they would be dead meat using a well-made rifle in 7 mm WSM - 300 WSM - 325 WSM - 7 mm Rem mag - 7 mm RUM - 300 RUM - 300 Wby mag - 338 win mag would be lights out on any Camel. Not only I am a professional hunting guide from back in 1978 I also build and sell custom rifles and have my own line to sell of AR 10 uppers in WSM chamberings and wildcat cartridges for the AR 10. Also, for in the US today's ammunition prices don't differ from Magnum cartridge to standard non magnum cartridges proving again you have Zero experiences with firearms. I just seen at a Cabalas store PPU 8 mm Mauser & PPU 308 ammo side by side on the shelf per box was $42.00 the Box of Hornaday 300-win mag ammo was $35.00 so tell me again how non magnum ammo is cheaper than magnum ammo.

@@Lure-BensonSuch superb in depth knowledge should be treasured, along with the game management, knowledge etc wisdom around pest control so prevalent among guides. The few exceptions do earn respect, incidentally. However if being cheap, nasty but effective find out what the professional pest control workers who are well experienced & effective use, and what they'd buy again. And who their favourite gunsmiths are. Might need to be diplomatic how to get that information, as many will have all sorts of fun providing information to those that haven't earned respect.

From the time I was a little boy my elders and I have used Leupold scopes then Leupold got nasty with me at the factory so then I start looking for another brand of scopes then I bought really cost wise cheap the Sig buck master scopes 3 of them then to my surprise all of them are holding up very well. I haven't put any of them on a large magnum rifle but on AR 10s in 308 - 6.5-284 Norma -6mm - 284 win they work fine so far.

G'day Butch, I'm running a Vortex Crossfire (CF-RD2) so 2 MOA It's the Chace/Helicopter configuration.

She's reliable!! And does the job! Took out a few donkeys today 😂

Beauty 😁😁

​@@jack_out_the_backreliable as in you can rely on it to give you a hard time? 😂

@@jack_out_the_backhow in hell can you call that PoS reliable?, with a decent rifle/scope combo you wouldn’t need to be chasing wounded animals around like that 🤦🏼

The rifle gets cleaned weekly. The magazine with the rust on it probably dodged a clean or 5. I wish I could have the L1A1, we aren't allowed semi automatic centerfire rifles in Western Australia. The feed issues are magazine related, the rounds slip just a bit forward with the recoil and catch, with FMJ's it would feed better, but the soft points are more effective.

@@jack_out_the_back Jack you need to slip in some shim material into the front of the mag and fold the bottom of the shim under the feed spring to stop it moving.

This is an Australian international arms M10B which is modelled off the Enfield, but it takes the M14/M1a magazines as it's chambered in 7.62NATO I don't reload my ammo anymore.

​@@jack_out_the_backlack of primers or powder availability?

They also banned .338 here because they said there was nothing big enough to justify it! Effectively they banned everything over a 30 cal (I think a 338WM is still allowed though) I am a fan of my 3-9x optics

Yeah they would be great out here! But we aren't allowed semi-automatic centerfire rifles in Western Australia because there is no "genuine need" for them.

Yeah the eye relief is all set too short, mainly made for flat top rifles. I have one sitting on the shelf 😥

I assume it's for legal reasons. Australia is crazy with it's laws

@@JasonBrinkley-ef4zgThe safety on the lee enfield action has a couple of issues, & the half bolt position isn't secure like a mauser. But they work in dirty/sandy conditions when the mauser will stick.

Could be, like me and many other Aussies, we grew up with an empty chamber Is safe. It cant accidentally fire no matter what happens. A safety catch is, "it Should be ok" but there is no guarantee it wont fire. No matter how good the factory safety is, I Never use one. I just dont trust it with my or other's life. Open bolt, lever etc or visibly checked empty chamber.

It's big enough that the bike would run out of fuel getting to where I was. It's roughly 1 million acres

DJI osmo action 3, in my video with the speedline I have the horizon lock, Rocksteady, turned on and it's a lot better

@@jack_out_the_back Thanks a million 🙏

That's the least of the optics worries! The impact from the clearance is minimal compared to that it's rated for.

Jack you don’t re load your own Amo

its actually a AIA 308 with a enfield action

​@seanfrazer4589 7.62×39 ..... correct me if I'm wrong but it's not a 308

308

Ok I thought it was a 30.-06

@@scottdittel5121Mann? Many in these comments can’t tell calibers, they range from .303 to 6.5x55. What is your thought process? I must study you for science.

I had strongly considered the magnifier, especially since I have the 2moa dot, but I went over to the full optic for the extra reach

For sure ! Sometimes I trip over mine !

Thanks Ian

He is using a AIA lee enfield in .308

Thanks so it’s an Aussie made Lee enfield in 308. I’m a 30-06 fan myself but nothing wrong with a 308@@cameronlamb7274

@@user-ec3om5bk5d yes they were still making them not long ago. I remember eyeing them up wanting one in 7.62x39 back when surplus was more available up here in Canada. The Canadian government was also looking into issuing these to the Canadian rangers in .308 as a replacement for their old .303 lee enfields but they went with a more modern design instead.

@@cameronlamb7274 Up here in Canada ??? Lol I’m in Canada too! Small world

aia

Nope, a no.4 clone. Turned a pretty reliable action into a garbage rod

His issues are mag related.