Repairing a Sack of Makita, Bosch and Hitachi powertools.

Рет қаралды 45,107

5 ай бұрын

Another lump of tools sent in for repair. This lot was sent in from a company who make garden ornaments out of concreat.
Only the grinders repaired in this lot, the hitachi impactor was not worth fixing.
No shortage of grinders needing repaired I this game. They are one of the most used and abused tools out there, so your bound to see a lot.
#makita #hitachi #bosch #tools #repair #longplay #longvideo #powertools #repairs #teardown #toolrestoration #toolrepair #toolfix #grinder #grinderrepair

Пікірлер: 96

@boberson83 5 ай бұрын

Who needs fancy tool boxes when you've got a dusty burlap sack

@C_Productions 5 ай бұрын

Just imagine showing up with your tools in a sack like this on a construction site. Umm no... they are NOT stolen...😂😂

@ProfaneGod 5 ай бұрын

You can tell the cut of a man by the size of his sack. lmao@@C_Productions

@rodpatient9 5 ай бұрын

Spurred on by your videos Dean, I stripped, replaced the firing pin and reassembled a little 18g brad nailer yesterday. I had to chuckle to my self as I tested it out and said "that's her". Keep doing what you're doing - entertaining and very informative!

@deandohertygreaser 5 ай бұрын

Nice one, no better feeling.

@Celtic-jr9cn 5 ай бұрын

A mean who would of thought it would be this good to watch tools getting stripped and rebuilt. My favourite channel for ages. When you find one you where not expecting turns out to be a hidden gem. Well done deano

@davidworsley7969 5 ай бұрын

Not far off 100,000 subscribers! Not bad for a modest tool repairer from Ireland-Well deserved.

@deandohertygreaser 5 ай бұрын

thanks, hopefully ill get there.

@sabitiskoglu1268 5 ай бұрын

For me,that quality of contents 1 million subscribers not an utopia .

@richardfife8192 5 ай бұрын

It's a big ask but I would love a quick video on your recommendation of tools... You see more about a tool than 99% of us. You see the insides and what fails etc. Thank you for your great channel and work!

@robinbeckford 5 ай бұрын

I think he did a video on the tools he uses.

@sabitiskoglu1268 5 ай бұрын

...Wiha screwdrivers etc.

@pablovasquez4827 3 ай бұрын

You are without a doubt a professional, excellent video

@ferndog1461 4 ай бұрын

Drinking coffee. Watching tech do magic on dead power tools. Toast to Mr Doherty.

@justinmcquaide4862 4 ай бұрын

Brilliant video if you were ever going to start buying tools this is the man you need to ask his knowledge is amazing !

@nguyenhaianh8070 5 ай бұрын

The 755 motor in that Hitachi is actually very cheap. You can take it from Ryobi and replace the teeth. I did it for my hitachi impact and it work just fine

@shifty277 5 ай бұрын

Ryobi are few and far between in the UK and Ireland.... From a liability standpoint I can't see ya man wanting to do that either. €100 would probably get you a new bare impact from Hikoki with a 3 year warranty.

@troubleis5271 5 ай бұрын

Another tool bonanza from the legend Dean- Classic!. Greetings from the Netherlands

@deandohertygreaser 5 ай бұрын

Many thanks!

@theshemullet 5 ай бұрын

Always great to watch. Was actually up in Letterkenny last weekend and was tempted to drop into the shop just to see.

@henryrossouw930 5 ай бұрын

Another great video.Learnt a lot.

@deandohertygreaser 5 ай бұрын

Glad you enjoyed it

@butchergonemad6520 5 ай бұрын

Nice one from Sydney

@jcoul1sc 5 ай бұрын

Thanks Dean I have a leftie grinder, going to rotate today

@austenj4539 5 ай бұрын

Nice one from Catford, London SE6!

@michaelfairchild 5 ай бұрын

Im going to have something to watch on my break at work.

@83glacius 5 ай бұрын

i ve repaired by green bosch anglegrinder some gws 7 115 ..thanks to you ! a friend had a bad one also..but i used his armature...enjoyin your vids every night before i go to bed..love the accent btw .remainds me of a old friend..😊

@dannyedwards592 5 ай бұрын

After 8 months of watching, I might know how to change brushes, but I'm always missing that screw.

@Bekim8310 5 ай бұрын

Of course he starts off with the Makita haha.

@jasonbuckler190 5 ай бұрын

Good job!

@38skippers 5 ай бұрын

Nice one from Perth😏

@kevingodsave8893 5 ай бұрын

Great videos, Dean. It looked like the brush spring at 30:03 did not return to its normal postion.

@doctorlefthandthread 5 ай бұрын

I never got tools in a sack to fix usually a bucket for some unknown reason

@getur99 5 ай бұрын

Impressively low cost for a replacement gear set. Was thinking it was a right off at the start

@bannzai 5 ай бұрын

Bish bash Bosch, us Doherty's don't take any shortcuts. If a jobs worth doing, it's worth doing well as my old daddy used to say as he was brewing his poteen lol. Love, health and respect from Scotland UK. Up Belmullet, Up Mayo

@ElMariachi1337 5 ай бұрын

I'm not familiar with English electricty and repairs, but in the Netherlands it's a no go to put an earthed plug on a double isolated machine used for professional work. It's labeled as a false sense of security since the earth leakage circuit breaker won't work on this machine (especially worth when working in a wet environment and not getting electrocuted)

@GRamerDim 5 ай бұрын

Hi Dean, loved the video. What light are you using at 19:27 ?

@mmingle57 4 ай бұрын

Wow! You can tell how many tools you’ve pulled apart! Nice job! A video well worth it! Great VALUE HERE!!

@KarenTookTheKids364 5 ай бұрын

Do any of the lads who drop off these tools ask for suggestions on purchases or maintenance because I would 😂

@jackmccallum3835 4 ай бұрын

These videos are so therapeutic for me. On the second Bosch grinder - what did you do to the tips of the stripped lead wires before screwing then in? 35:02

@henrycatt5844 5 ай бұрын

Nice one from Dubai.

@jeffers2923 5 ай бұрын

Morning Dean ,can you tell me what lead you use as a replacement.thx

@TheDarkKl342 5 ай бұрын

16:11 this screw sounded like slowed down sponge bob laugh

@DarkMetaOFFICIAL 5 ай бұрын

that was the most Irish possible way to store tools 😂

@Diablo-jt4tv 5 ай бұрын

I love to see a proper Irish man working with his hands, cheers from Latvia. In my work place, we repair our tools till they fall apart, I have so many hours of experience. The only difference in my work is that, if the company doesn't provide parts, like a simple switch, we buy them from China. It's not a legit part but for 2 euros I can replace a switch and give a machine a couple of hundred extra hours. It's like a mafia, some tools are meant to be thrown out, even the problem is a simple switch.

@Diablo-jt4tv 5 ай бұрын

There is no excuse that the switch doesn't come separately from the motor or the brains of the machine.

@doctorlefthandthread 5 ай бұрын

@@Diablo-jt4tv I know it's not good companies should be made to make modular replacement possible

@Diablo-jt4tv 5 ай бұрын

It's such a shame sometimes. I would prefer to use original parts but when something as simple as a switch comes in an assembly of parts with a manufactures tag of 50 euros in machine that cost 80 euros, its just extortion, a mafia. I can clip off and replacer any switch with a 2 euro Chinese switch. It's not as pretty as a original part but it keeps the tool running, as I see it it's the fault of manufacture to not provide modular parts for their tools. @@doctorlefthandthread

@doctorlefthandthread 5 ай бұрын

@@Diablo-jt4tv I agree totally

@jernejloknar8011 5 ай бұрын

Brushes in the hitachi impact driver - mabuchi 755 motor can be replaced for cheaps but it takes a whole lot of annoying work to open and re-seal the motor plus a 2 months wait for brushes from china.

@pauric1991 5 ай бұрын

Hi Dean what grease do u recommend for the milwaukee k540s when changing out piston and striker orings

@jcoul1sc 5 ай бұрын

Suggest a vacuum cleaner first so dust catches inside, before blowing, can be done in place too

@jcoul1sc 5 ай бұрын

Was thinking you can buy cabinets for blowing things out too, I think

@user-lp7dd7dz9m 5 ай бұрын

@@jcoul1scyou can make your own too cheap and easy

@djsahilremixi4520 5 ай бұрын

Your Bearing Pullers link?

@michaelflynn6178 5 ай бұрын

There’s the problem T shirts 😊

@robinbeckford 5 ай бұрын

Or 'That's her done' |-)

@tnbspotter5360 4 ай бұрын

So in Ireland, things show up randomly in potato sacks.

@darkness7250 3 ай бұрын

Bosch Grinder's brushes are new, but there is still flame coming out of the collector. why ?

@bustr4063 5 ай бұрын

Question. How do you get your hands on these broken tools?

@bayadere8308 5 ай бұрын

It's his job. He has a small but healthy business doing tool repair. Therefore, people bring the tools to him.

@fredholmes6284 5 ай бұрын

It's his job..but it isn't his business..he works at his local hardware shop doing repairs..he was asked this question before 👍

@shanepowers7566 5 ай бұрын

Hello, from midwest Oklahoma.

@deandohertygreaser 5 ай бұрын

Hello there!

@andygardiner6526 5 ай бұрын

The last grinder is a 700w unit so, if I stuck a PAT on it, I would normally fail it and replace the 13A fuse with a 5A. Do you leave it at 13A as that's what was fitted by the customer, does it get a PAT before collection and changed, or does that grinder blow 5A too often under surge loads so it gets a 13A anyway?

@deandohertygreaser 5 ай бұрын

Startup amps are to high. 13amp fuse is needed on these.

@AndrewStrydomBRP 5 ай бұрын

@@deandohertygreaser Worth looking up the breaking curve/envelope for a BS1362 fuse (what is fitted in plugs) A 3a will let you pull 10a for about 5 seconds before blowing, a 5a will give you about 10a for good 10 seconds. (approx 2x the rating for 10 seconds), and a significant amount more for just a 1 second startup time. Probably would have fitted 7 or 10a myself, lower is always better even if the fuse is just meant to protect the lead and not the device, a well selected fuse can pull double duty.

@markskeels8132 5 ай бұрын

What diy impact driver would you recommend. I'm looking at cordless just don't want to get a lemon or massively expensive.

@fredholmes6284 5 ай бұрын

Can't go wrong with erbauer ext 18v brushless motor (Screwfix/b&q) trade rated as well..👍

@markskeels8132 5 ай бұрын

@@fredholmes6284thank you

@UnCoolDad 5 ай бұрын

No ground wire on these tools?

@deandohertygreaser 5 ай бұрын

No these are class 2 electrical appliances, they have no exposed metal components that could contact live of neutral. insulated cables and plastic casings. No need for an earth lead.

@chanceb9092 5 ай бұрын

i work with you in my ears. any commentary on makita CXT? i haven’t seen one in a video

@tempestnz1 5 ай бұрын

Your phillips bit on your drill slips because japanese tools, vehicles etc dont use phillips theyre JIS and slightly different than phillips although look the same. File the tip of the bit down a touch

@robinbeckford 5 ай бұрын

I just use JIS bits for Philips as well.

@KennyMinigun 5 ай бұрын

29:55 it almost looks you forgot to put the spring in place.

@tommcl8548 5 ай бұрын

👊👍

@irvanhadi1312 5 ай бұрын

ins that u sale what u fix??

@jameshill2412 5 ай бұрын

Mesmerizing!

@SantaClaw 5 ай бұрын

Weirdly, sound seems to alternate between mostly coming out of either the right or left speaker depending on what segment you are on.

@deandohertygreaser 5 ай бұрын

That is because I could be standing to either side of the camera. When filming the camera is directly in front of my face

@SantaClaw 5 ай бұрын

@@deandohertygreaser Makes sense. Might wanna invest in a wireless mic of sorts to clip onto your jacket.

@venenareligioest410 5 ай бұрын

Dean, the last job, how come no earth on it ? 😱

@deandohertygreaser 5 ай бұрын

most modern power tools and most old ones are class 2 double insulated. the motor is enclosed in plastic so no need for a earth lead.

@venenareligioest410 5 ай бұрын

@@deandohertygreaser Thanks 👍 that must be why Chinese crap has no earth wire, and if it does they don’t connect it 😱

@nathanguerin546 5 ай бұрын

Hi dean I a 16 year old apprentice what you be the best power tool brand to be Not Hilti anyway

@shifty277 5 ай бұрын

Deans opinion is Makita. 3 year warranty if you register on the site within 30 days of buying and the vast majority of their machines can have individual parts replaced as opposed to having to replace the whole machine if it konks out like a lot of Milwaukee. DeWalt and Bosch too. DeWalt have a better 18v line than Bosch imo

@raytalbot5890 5 ай бұрын

What happens to the tools that die?? 🇬🇧🇬🇧👍👍

@AphexTwinII 5 ай бұрын

Do you keep the no fix tools or give them back to the customer? P.S. The last hammer was a counterfeit. Probably found a 75% off Amazon deal. Amazon is rife with very convincing fake tools.