Repairing a Box of Makita and Bosch power tools

Рет қаралды 38,077

6 ай бұрын

This fish box of tools was dropped in from a local steel steel fabricator who builds steel frame buildings.
This is a common bunch of tools we get in from steel workshops, in pretty much the same condition. Only tool missing is a magnetic drill.
Grinders are going to be one of your bread and butter repairs. Everyone has one, and workshops amd fabricators will has several. So they are always coming in.
They are an easy tool to strip down and repair. And you can generally get through them quite quickly.
Nibblers you don't see as othen, as most of the time they simply don't break.
#tools #repairs #grinder #fixgrinder #grinderrepair #bosch #makita #boschgrinder #makitagrinder #toolrepairs #fixingtools #toolfix #mend #restoration #toolrestore #gws #jn1601 #nibbler #makitanibbler #nibblerrepair #sander #workshop #deandohertygreaser

Пікірлер: 40

@timtimtim5294 6 ай бұрын

The amount of spare parts he stocks is hard to fathom. Can’t believe he can keep track of them

@kennypeebles132 6 ай бұрын

I was looking for a video of yours with a makita sander a couple of weeks ago! I thought it was an issue with the brushes after watching your videos. Ended up being the armature was destroyed. Luckily my job had another one specifically for parts. Thanks to your videos I had the confidence to do a repair and fix it myself! All of this to say Thank you for all of the videos you put out! Incredibly helpful.

@Steve-vz3ud 6 ай бұрын

Nice Job

@derekadams729 6 ай бұрын

Love your videos. I fixed 2 of my 4 inch angle grinders thanks to you. 1 DeWalt new switch and bearings. 1 Bosch broken wire in the lead.

@andrewhorsburgh2549 6 ай бұрын

The thing like is, no painful, stupid music. Great work

@seanallen924 6 ай бұрын

Just a heads up I’d be warning people of not touching a live open tool, someone is going to give themselves a big shock one day. I grew up around this stuff as a kid my old man used to be a motor rewinder and I copped a few jolts as a kid messing around. You’re doing a fantastic job with the videos too, I look forward to them each day 👍

@krz8888888 6 ай бұрын

I don't know if you've done it before but since you're working with them all the time, a video with your hand tools recommendations / preferences would be useful

@dskirkpa55 6 ай бұрын

Again thanks Dean, for the very informative vid. 👌

@petegraham1458 6 ай бұрын

Looks like you have an endless supply of what appears to be Clan Fraser tartan you use as wipes! Lots of good fun watching your knowledgeable repair and comments about quality and serviceability of these tools. I have learned quite a lot from you already, thank you.

@lunatiy 6 ай бұрын

Thanks for another great vid Dean. That flashlight is coming in handy i see.

@jason-hh6lu 4 ай бұрын

My 2014 Festool ctl midi started to make a different noise then usual a few weeks ago. I took it apart and the brushes were badly worn. It took 3 weeks for new ones to turn up. I fitted them today and everything is working great. I can imagine how long different parts take to get to you for small repairs.

@jdmccorful 6 ай бұрын

Nice work and lots of suppositions. Thanks for your time.

@austenj4539 6 ай бұрын

Those Draper DEP1 pliers look fantastic - an 'all in one' angled plier for levering, a wire cutter with pattress screw cutter holes and a crimper! You should team up up with a shop sponsor to get commission from a linked recommendation. Great content again.

@deandohertygreaser 6 ай бұрын

they are one of my most used tools. but for some reason they have never sold all that well. I find all the ero plus with the angled head very good. nearly as good as knipix.

@foxconNI 6 ай бұрын

I bought one they are brilliant

@daverichmond2846 6 ай бұрын

Awesome !! 😁 Sitting at my kitchen table with a mug of real coffee,a packet of Tim Tams ( Aussie biscuits. Look them up.😉) and my eyes glued to “ Power Tool Adventures,with Dean D “! “ Watt” will he find today? Will something finally cause Dean to “ arc “ up? Will the fat rat make a “ shocking “ return? I’m sure there’s going to be “ amp”le tools to fix,as long as no one “hertz “ anyone . It shouldn’t happen cos he’s a bright “ spark “ with a lot of good “ connections “,. …… l’ll stop now cos’ this isn’t my “ Field” of expertise,… 😬 Ps. You really need a swivel chair ! 👍🏻

@jasonvandervalk3679 6 ай бұрын

Can of beer for me

@daverichmond2846 6 ай бұрын

Well,me too usually. 😉 Dunking Tim Tams in beer is not the best,…😬

@davidworsley7969 6 ай бұрын

Great video as usual, I like the idea of ferrules instead of tightening down on the bare wire, any idea where I could get the pliers you use?

@ilfordjedi 6 ай бұрын

Some nice easy fixes there Dean. I bet you felt like doing the Hikokikoki after sorting that lot? 😉 And nice to see your subs going up.

@deandohertygreaser 6 ай бұрын

Thanks 👍

@Robiscrapifixi 6 ай бұрын

Must be tricky with 110 and 240 here in Straya its only 240 single phase or 415 three phase for the big stuff Got the same bosch 9 inch combo old and new both fantastic

@brad9529 6 ай бұрын

Would be cool to see you detail one for resale

@franktrujillo9348 5 ай бұрын

Have you ever worked on a Bosstich Mlll nailer .?

@agnosticevolutionist3567 6 ай бұрын

I do wonder if the trades men who own these tools are as rough with there jobs as these tools

@kevinsturgess1475 6 ай бұрын

👍

@kyledavy5698 6 ай бұрын

I am from South Africa and looking for a Metabo grinder guard. Any idea where I can source them from as well as the grip handle?

@chucknorris2952 5 ай бұрын

Google the model number and what part you missing. Found parts for several 80's bosch tools (exploded diagram). They had everything for these old tools, got the parts sent from Germany

@daverichmond2846 6 ай бұрын

You’re def’ a Sherlock Holmes figuring out “ Watts “on with these thingos,.. You’ll be glad to get “ ohm” at the end of the day,.. Do you catch a bus home? Is it a long trip,you could always talk to the “ conductor” so you don’t get bored. I think he only works part time,..so l guess he’s a “ semi conductor “,.. He’s a nice Greek chap lve heard,…umm,..l think his name is Con,…yes,..” Con Duit”. Say gday for me next time you’re on the “ circuit”. 😬😉

@stuart6973 6 ай бұрын

I’ve no heard anyone say THRAN for years 😂

@deandohertygreaser 6 ай бұрын

we say it every day here

@Aghmoallem 6 ай бұрын

nice work 👍👍👍, by the way why some tools have piece of black tape on them?

@simes888 6 ай бұрын

Obscuring the owners name.

@Aghmoallem 6 ай бұрын

oh... thanks@@simes888

@kylehawk9055 6 ай бұрын

Bump 🫠

@garyallport18 6 ай бұрын

Dean the stuff that is not worth repairing,cant you use them for spare parts

@boberson83 6 ай бұрын

He often does, like with the brush holders in the Bosch grinder in this video.

@deandohertygreaser 6 ай бұрын

they all go back to the customers who owns them. what they do with them is up to them. sometime they ask me to keep them for spare parts and if they do, i will reuse what i can.