How to Turn Gnome Ornaments That Sell. By Dean's Woodworking

Рет қаралды 89,969

Күн бұрын

How to Turn Gnome Ornaments That Sell. In this video I show you how I turn a Gnome Ornament from a simple limb. These little guys are super popular right now and are in demand. They are simple and easy to turn and are great sellers plus your family and friends will love them.
Thanks for Watching
Website
www.deanswoodworking.com/
Facebook
/ deansfinewoodworking
Instagram
/ deans_woodworking
The following links are affiliate links to items that I use in my shop.
Any potential purchasing or even clicking on these links will help support the channel
Making it possible for me to continue to create more content for you.
Many of these items you have seen in use in the videos.
Fur for Beards amzn.to/3rlIXeD
Tools I use
3/8 Double end Ball Mill amzn.to/3mDhFie
CHUCKS AND MOUNTING
Bottle Stopper Chuck amzn.to/342ohjM
Nova G3 Chuck amzn.to/3zhBtgl
Nova Infinity quick change chuck amzn.to/3mEBKod
Oneway Talon Chuck amzn.to/3z1Jhm2
Oneway Stronghold Chuck amzn.to/3Hx4Q15
Oneway Live Center MT2 amzn.to/3quwu7N
Oneway Live Center MT3 amzn.to/3sThzXR
SHARPENING
Oneway Wolverine Jig amzn.to/3EABvAN
FINISHES
Min/Wax Antique oil finish amzn.to/3ExF36M
SUPPLIES
Bottle Stopper hardware Standing 10 pk amzn.to/3Jg4gGq
Bottle Stopper hardware Cone 6pk amzn.to/3HiqR3g
Ornament Hangers Silver amzn.to/31bwG3k
Ornament Hangers Gold amzn.to/32HcxCw
BOOKS
Book Classic Forms amzn.to/3z2AqQZ

Пікірлер: 216

@twoblacklabs 6 ай бұрын

@Deanswoodworking I have been “studying” quite a few gonk videos over the past few weeks and built a private library for my own reference (I have significant short term memory issues and rely on my KZfaq library for reference). THIS video is going to the very top of the playlist. I love this approach more than any of the others and I know I’ve watched at least 25 so far. Thanks for such a cool way to go about it.

@DeansWoodworking 23 күн бұрын

Thanks

@danamcmanus 2 жыл бұрын

These are adorable! Thank you! 💘

@DeansWoodworking 2 жыл бұрын

Thank you! 😊, and Thanks for Watching!!!

@AndrewR74 2 жыл бұрын

Very cool. Thanks for sharing.

@DeansWoodworking 2 жыл бұрын

Thanks for watching!

@skturnings7645 2 жыл бұрын

Awesome video! I never would have thought a gnome could be so easy! Thanks for another great lesson, Dean! You're killin it!

@DeansWoodworking 2 жыл бұрын

Glad you liked it Shawn, Thanks for Watching!!!

@jnol9009 2 жыл бұрын

Great job again. Thx for sharing

@DeansWoodworking 2 жыл бұрын

Thanks and Thanks for Watching!!!

@jackthompson8019 2 жыл бұрын

Dean, these gnomes are absolutely gorgeous.

@DeansWoodworking 2 жыл бұрын

Thanks Jack, and Thanks for Watching!!!

@royboggs3849 2 жыл бұрын

Dean, I just love how you utilize ordinary limbs to make cute stuff! 👍👌👏👏❤️

@DeansWoodworking 2 жыл бұрын

Thanks Roy, and Thanks for Watching!!!

@helenalmey6812 2 жыл бұрын

Thank you for a great demo - cannot wait to try making these!!

@DeansWoodworking 2 жыл бұрын

You are so welcome, have fun, and Thanks for Watching!!!

@bassplayer60 2 жыл бұрын

Very cute, Dean! Very interesting! And clever!

@DeansWoodworking 2 жыл бұрын

Thanks so much!

@andredupuis8497 8 ай бұрын

Very very nice & good idea❤

@veea.4936 Жыл бұрын

SO CUTE!!! I love them!

@veea.4936 Жыл бұрын

Is that your fur baby hollering at you 🤣

@DeansWoodworking Жыл бұрын

yes he wanted to be in the middle of the table.

@davidblair6454 2 жыл бұрын

Another great project...looking forward to trying these myself

@DeansWoodworking 2 жыл бұрын

Go for it! Thanks for Watching!!!

@DougMilleratWoodSpunRound 2 жыл бұрын

Another great project Dean. Well done.

@DeansWoodworking 2 жыл бұрын

Many thanks Doug!!!

@terryhooper9169 2 жыл бұрын

Thanks Dean 👍

@DeansWoodworking 2 жыл бұрын

My pleasure!! Thanks for Watching!!!

@LarryDMitchell 2 жыл бұрын

Good method and I love the live edge hats. Adds some uniqueness to the Gnome.

@DeansWoodworking 2 жыл бұрын

Thanks Larry, and Thanks for Watching!!!

@scotttague2729 2 жыл бұрын

Great job Dean they are awesome👍👍👍👍

@DeansWoodworking 2 жыл бұрын

Glad you like them Scott, Thanks for Watching!!!

@Susanjilek1953 2 жыл бұрын

Thanks Dean

@DeansWoodworking 2 жыл бұрын

Very welcome Susan, Thanks for Watching!!!

@KS-ts3le 2 жыл бұрын

What a great idea with the vinyl, keeping your workshop clean

@DeansWoodworking 2 жыл бұрын

Glad you like it! Thanks for Watching!!!

@johnnyhugheswoodworking595 Жыл бұрын

Thank you Dean, great video

@DeansWoodworking Жыл бұрын

Glad you enjoyed it

@jimhayes3225 2 жыл бұрын

Beautiful piece.

@DeansWoodworking 2 жыл бұрын

Many thanks!

@ian7583 2 жыл бұрын

Just love ❤️ these nice Dean 😍

@DeansWoodworking 2 жыл бұрын

Thanks so much 😊

@monopinion8799 2 жыл бұрын

Love your work. Great ideas. Keep it up!

@DeansWoodworking 2 жыл бұрын

Thank you Sylvie Will do!

@darylreinke2619 2 жыл бұрын

Thank you! Gnomes seem to be a popular item

@DeansWoodworking 2 жыл бұрын

Thanks Daryl, and Thanks for Watching!!!

@TheTacktishion 2 жыл бұрын

It helps to eliminate the "chatter" on a long limb like that if you bring the tailstock up for support. Good job Dean....!

@denniszlatkin4280 Жыл бұрын

I make Christmas ornaments every year for family members and was running out of ideas until I saw your video. Really cool and your tutorial was well done , as always. Thanks, Dean!

@DeansWoodworking Жыл бұрын

Thanks Dennis, and Thanks for Watching!!!

@tfwoodcraft Жыл бұрын

these are awesome!

@DeansWoodworking Жыл бұрын

Thanks Trevor!

@MrMaddawgg 2 жыл бұрын

Great video! Your work is amazing and what's more, you work at my speed! Love your slow methodical approach.

@DeansWoodworking 2 жыл бұрын

Thank you very much!

@dkheaton 2 жыл бұрын

I am really loving your videos. You show a lot of easy-to-make and different things. Thanks for sharing.

@DeansWoodworking 2 жыл бұрын

You are so welcome! Thanks for Watching!!!

@vernonabernethy3970 7 ай бұрын

Really great for learning how to use the lathe!

@DeansWoodworking 7 ай бұрын

Glad you liked it!

@AndysCornishCreations 2 жыл бұрын

Hi Dean... I love these little guys... I will definitely give them a go... Looks like this is going to be a popular video... well done... Take care...All the best.....Andy

@DeansWoodworking 2 жыл бұрын

Thanks Andy!!!

@keithkimsten5111 Жыл бұрын

I always enjoy your videos! Thanks, and Happy Holidays to you and yours!

@DeansWoodworking Жыл бұрын

Happy holidays!

@jackthompson5092 2 жыл бұрын

Nice gnomes Dean.

@DeansWoodworking 2 жыл бұрын

Thanks Jack and Thanks for Watching!!!

@randywood4782 2 жыл бұрын

Good job Dean I 👍

@DeansWoodworking 2 жыл бұрын

Thanks for the visit Randy!!!

@terrylay6034 Жыл бұрын

NICE

@DeansWoodworking Жыл бұрын

Thanks

@johnhartman8086 7 ай бұрын

Thank you very much!!! Well done!!!

@DeansWoodworking 7 ай бұрын

Thank you for watching

@ian7583 Жыл бұрын

Sweet

@DeansWoodworking Жыл бұрын

Thanks!

@30jamesnelson 2 жыл бұрын

DEAN,, I REALLY ENJOY WATCHING YOU WORK AND YOUR WHOLE SERIES OF ORNAMENTS HAS BEEN FUN AND INFORMATIVE. KEEP IT UP MY FRIEND

@DeansWoodworking 2 жыл бұрын

Thank you! Will do! Thanks for Watching!!!

@hans-joachimsteinitz993 2 жыл бұрын

The gnomes look pretty good. Thanks and best wishes from Germany

@DeansWoodworking 2 жыл бұрын

Thank you Hans best wishes to you! Thanks for Watching!!!

@suzetteedwards7956 2 жыл бұрын

Great video. You make it look easy.

@DeansWoodworking 2 жыл бұрын

Thanks 👍

@shastastan1935 10 ай бұрын

Thanks for video. I'm going to make some of these for our church boutique. I enjoyed watching your skill with the skew, too.

@DeansWoodworking 10 ай бұрын

Awesome Glad you liked it.

@josephwise485 2 жыл бұрын

My clubs challenge next month is turning a gnome, good timing for me. Compared to other videos I've watched, you seem to have simplified the process. Thanks for sharing.

@DeansWoodworking 2 жыл бұрын

Thanks Joseph, and Thanks for Watching!!! Good luck with the challenge.

@mikebadilla6970 2 жыл бұрын

Very Nice Thankyou.

@DeansWoodworking 2 жыл бұрын

Most welcome, Thanks for Watching!!!

@deforrestkeeling5782 2 жыл бұрын

Thank you Dean. Your pretty informative on your stuff and it's given me some good ideas. Hopefully after hip surgery I can go turn some of the things that I've seen.

@DeansWoodworking 2 жыл бұрын

Thanks, I hope your surgery goes well and wish you a speedy recovery. Thanks for Watching!!!

@franwilson2097 2 жыл бұрын

right on Dean,looking good my man,and by the by I got my lathe yesterday,setting up will try out today,it's beautiful and very big,I happy

@DeansWoodworking 2 жыл бұрын

Congrats Fran, Have fun and be safe!!!

@mountainbushcraftersallian8654 2 жыл бұрын

I just turned 36 snowmen and these are awesome! New follower here....Straight to the point...

@DeansWoodworking 2 жыл бұрын

Thank you, and Thanks for Watching!!!

@lesouco 2 жыл бұрын

Very good job

@DeansWoodworking 2 жыл бұрын

Thank you so much 😀 and Thanks for Watching!!!

@positiveandhealthy2728 2 жыл бұрын

I follow your all tips and really I feel change in my life 👌🏻

@DeansWoodworking 2 жыл бұрын

Thanks and Thanks for Watching!!!

@aggieturning5796 2 жыл бұрын

Great job Dean. Need to make some for Christmas this year.

@DeansWoodworking 2 жыл бұрын

You should! There a lot of fun and easy to make. Thanks for Watching!!!

@shivnathbhagyawan2791 11 ай бұрын

or rhythmic❤

@ianbedwell4871 2 жыл бұрын

I have made a bunch of free standing gnomes, never thought of doing them as hanging ones so thanks for the idea. In stead of cutting down the beard to go around the beard I use a leather punch from the back to make the hole for the nose, I found that helps me hold while all the glue cools etc

@DeansWoodworking 2 жыл бұрын

That's a great idea! Thanks for Watching!!!

@johng6018 2 жыл бұрын

Really like your teaching style. So much of KZfaq is filled with extra crap that's just not necessary. Thanks for that!

@DeansWoodworking 2 жыл бұрын

I appreciate that John, Thanks for Watching!!!

@jimphilpott902 2 жыл бұрын

Hot glue is great. I have made such a mess of gnome beards with CA glue. Good video presentation, as always.

@DeansWoodworking 2 жыл бұрын

Thanks Jim and Thanks for Watching!!!

@MrBill0523 2 жыл бұрын

Great Video Dean!! Going to make some for my grandchildren! God Bless! Merry Christmas!

@DeansWoodworking 2 жыл бұрын

Merry Christmas, have fun, and Thanks for Watching!!!

@stephanie09.11 9 ай бұрын

I would like this twice if I could. Hope all is well!

@im4dabirds 2 жыл бұрын

nice

@DeansWoodworking 2 жыл бұрын

Thanks, and thanks for Watching!!!

@richardschaffling9882 2 жыл бұрын

Very nice you did a great job on them

@DeansWoodworking 2 жыл бұрын

Thank you! Richard, Thanks for Watching!!!

@richardschaffling9882 2 жыл бұрын

@@DeansWoodworking I enjoy your videos

@DeansWoodworking 2 жыл бұрын

Thanks Richard!!!

@Jtsmith134 Жыл бұрын

I am thinking about taking up wood turning as a hobby. Your vids are great for a beginner :).

@DeansWoodworking Жыл бұрын

Thanks John.

@zaneclark3667 2 жыл бұрын

hello love your gnomes video, i think I'll make gnomes my first project! {I'm new to turning ! i just received my first lathe its a mini wen but a start}

@DeansWoodworking 2 жыл бұрын

Congrats on the new lathe Zane have fun and be safe. Thanks for Watching!!

@gregwilsonnaturephotography 11 ай бұрын

Hey Dean, i should have Gnome .... that you would come up with a great looking Gnome with character ! I gotta try it as well. Greg

@DeansWoodworking 10 ай бұрын

You should! Thanks for Watching!!

@gregwilsonnaturephotography 10 ай бұрын

I did, they are a fun project. I hope you are doing well and perhaps a new video soon? Greg

@stevefromlondon9175 2 жыл бұрын

What a fun little project they turned out so good going to find where to buy the hair Regards Steve UK London

@DeansWoodworking 2 жыл бұрын

Thanks Steve you can buy the fur at almost any craft or fabric store. Thanks for Watching!!!

@arlineastman 4 ай бұрын

Thanks Dean. Enjoyed it. See you are apart of AAW. I was for many years until I could not stand the politics anymore in it.

@rochellenowik9875 2 жыл бұрын

Lots of questions about the "fake fur". Amazon, JoAnn, Michaels and Hobby Lobby are your best bet for locating the fur if in the USA. Amazon has a good selection of the darker colors. When using hot glue and you want to get rid of those annoying glue strings you can hit them with a quick blast of hot air from a blow dryer. The gnomes are adorable. Gnomes are very big these days in the crafting world. I'm a paper crafter and have made many note cards with gnomes.

@DeansWoodworking 2 жыл бұрын

Great Tips Rochelle, Thanks for Watching!!!

@brianpoor763 9 ай бұрын

how are you? haven't seen you for awhile, sending prayers in case your not well, miss your videos

@jimhyslop Жыл бұрын

So simple! I hope you eventually paid attention to the poor kitty who was SO neglected 🤣

@DeansWoodworking Жыл бұрын

Yes, He wanted to be on the table (helping)

@MikePeaceWoodturning 2 жыл бұрын

Dean, your techniques are a bit different than mine but always good to see how others do it. I like the way you marked the fur cut with a felt tip pin and the heart shaped shape description is spot on. Stay safe my friend.

@DeansWoodworking 2 жыл бұрын

Thank you very much Mike, I have watched your videos for years. Thanks for all you do for the Turning comunity.

@richardkunicki5684 2 жыл бұрын

Absolutely fabulous, great turning. i assume beard is purchased at a hobby store. Thanks

@DeansWoodworking 2 жыл бұрын

Thank you yes you can get the fake fur at almost any craft or fabric store. Thanks for Watching!!!

@albertreed966 2 жыл бұрын

cute

@DeansWoodworking 2 жыл бұрын

Thank You Albert!!!

@wakelywanderer12 Жыл бұрын

This will be my Christmas ornaments this year. Thanks for the well done tutorial. As a side note, it’s hard to find a nose in a floor of shavings.😕

@DeansWoodworking Жыл бұрын

Glad it was helpful! it sure is lol.

@robertmiller-jones8952 6 ай бұрын

Cool video and neat process. Please tell me the diameter of the piece after truing up the branch and overall height of the finished piece. Thanks and have a Merry Christmas

@DeansWoodworking 23 күн бұрын

They Vary no two are the same.

@eternalhalflife 2 жыл бұрын

Love these -- Is there a reason to hollow out the body if you plan on sealing the top on?

@DeansWoodworking 2 жыл бұрын

only to reduce the weight since they will be hanging on a tree. Thanks for Watching!!!

@andredupuis8497 Жыл бұрын

Very Nice projet next projet christmas bell please thanks sir

@DeansWoodworking Жыл бұрын

Thank you! here is the link to bells kzfaq.info/get/bejne/n5eoZdx1mMy5mWQ.html

@gregj2647 2 жыл бұрын

Great project. Gnomes are the hot item right now. What are the rough dimensions of a typical gnome?

@DeansWoodworking 2 жыл бұрын

I am not sure I can answer that question. I make them all different sizes These are about 3 -4 inches half being the hat. Thanks for Watching!!!

@johncline3033 2 жыл бұрын

New guy here. I've been wondering what to do with the 200ft of cedar hurricane Ida left me. Now I know what to do with the smaller pieces. The tree was one my dad had planted a long time ago. I don't mind that it got blown down, I just wish it would have fallen ON the barn not AWAY from it lol.

@DeansWoodworking 2 жыл бұрын

LOL I understand, Thanks for Watching!!!

@charleskallay5484 2 жыл бұрын

If you don't mind small suggestions, drill the hole while it's on the lathe with more wood. Then turn the wood down to the size you want. This takes care of tear-out.

@DeansWoodworking 2 жыл бұрын

Thanks for the tip, and Thanks for Watching!!!

@inspectr1949 Жыл бұрын

Cute, can't help but wonder if the green branch wood splits with time?

@DeansWoodworking Жыл бұрын

I have not had a problem as long as I finish them as soon as i turn them when using green wood. Thanks for Watching!!!

@masjabrikdiy8422 2 жыл бұрын

Selamat malam.teman.pekerjaan yang bagus.#masjabrikdiy

@DeansWoodworking 2 жыл бұрын

Thank You, and Thanks for Watching!!!

@DaveBellStickermetimbers 2 жыл бұрын

Nice project. I don't understand why you wouldn't support the piece with your tailstock whenever possible.

@DeansWoodworking 2 жыл бұрын

Good point! use it if you can. Thanks for Watching!!!

@gregdagg9305 2 жыл бұрын

Looks just like a little neighbour I had when I lived over by the holler.. Nice job.. Did you get that cat fed?

@DeansWoodworking 2 жыл бұрын

The cat was not happy because he wanted to be on the table helping. Thanks for Watching!!!

@gregwilsonnaturephotography Жыл бұрын

@Dean's Woodworking I thought thecat was nervous that it was going to have give up its fur for a beard... lol

@trurex007lee7 2 жыл бұрын

Sweet project! Where did you buy the pin vise that fits into your drill?

@DeansWoodworking 2 жыл бұрын

I bought it off Amazon its just a regular pin vise but I took the collet off one end. That will let it fit into the drill chuck. Thanks for Watching!!!

@sebastianmacduck2222 2 жыл бұрын

The gnomes are very cute. I just don't understand why you're sticking your the hats on with glue. I will make them as small containers, then you can put coins or objects in them. The hat serves as a lid. Thanks for the great idea and the great video! Greetings from Germany

@DeansWoodworking 2 жыл бұрын

Thank you! 😊 I only glue them on for the ornaments because they are hanging on a tree. See the Gnome with a Secret Video kzfaq.info/get/bejne/bauFZKmpts3NfoE.html Thanks for Watching!!!

@sandyfox8723 Жыл бұрын

Hi. Lovely little objects. Could I ask why you hollow out the body if you intend to glue the hat on, please ? 🤔😌

@DeansWoodworking Жыл бұрын

To make it lighter since it’s an ornament hanging on the tree. Thanks for watching!

@sandyfox8723 Жыл бұрын

Thanks for that. You probably did say why, on the video, but I haven’t any sound on the computer 😡Much appreciated.

@DeansWoodworking Жыл бұрын

@@sandyfox8723 no problem Sandy, Thanks for watching!!!

@douglasgoddard7579 2 жыл бұрын

Good Morning Dean. Greeting from Northern Ireland. Just to say I have been enjoying you videos for the past few months. One simple question. Where or what do you use for the beards on the gnomes? Good wishes

@DeansWoodworking 2 жыл бұрын

Thank you Douglas the beards are fake fur you can get it at almost any craft or fabric store thanks for watching!!!

@rochellenowik9875 2 жыл бұрын

Amazon also sells the fake fur in several different colors (grey, brown, white).

@douglasgoddard7579 2 жыл бұрын

@@rochellenowik9875 many thanks. I visited Amazon

@DeansWoodworking 2 жыл бұрын

Great tip Thanks rochelle

@kandiecandelaria3134 2 жыл бұрын

Really cute! Where do you get your “fur”?

@DeansWoodworking 2 жыл бұрын

you can get it at any craft or fabric store. Thanks for Watching!!!

@charleswilliams4517 2 жыл бұрын

Dean, great job! However don’t understand why you drilled out the body. Why not keep it solid?

@DeansWoodworking 2 жыл бұрын

Charles It was just to make it lighter since it hangs on a tree limb. Thanks for Watching!!!

@chrismorgan6898 2 жыл бұрын

What do you use for the beard? Great videos

@DeansWoodworking 2 жыл бұрын

The beard is fake fur you can get it at almost any craft or fabric store. Thanks, and Thanks for Watching!!!

@maxkangen 2 жыл бұрын

Hello mate. I`m looking for a new sander and would like to ask you which one you use.

@DeansWoodworking 2 жыл бұрын

here is a link to the one I use It's from Woodturners wonders. woodturnerswonders.com/collections/unique-tools/products/angle-drill

@unclehornet5122 2 жыл бұрын

Is there a reason you don’t use a live centre in the tailstock to minimise vibrations?

@DeansWoodworking 2 жыл бұрын

I do when I can

@williamwodrich2430 2 жыл бұрын

wjere do you purchase the hair material? How do you fine finish the wood?

@DeansWoodworking 2 жыл бұрын

Fake fur you can get it and almost any craft or fabric store. I use spray laquer.

@claudeelliott3993 2 жыл бұрын

Just out of curiosity, what do you sell your gnomes for?? If you don't mind??

@DeansWoodworking 2 жыл бұрын

I belive those sold for $35

@claudeelliott3993 2 жыл бұрын

@@DeansWoodworking Thank you.

@EricRush 2 жыл бұрын

What is the beard fur?

@DeansWoodworking 2 жыл бұрын

Fake Fur you can get it at any craft or fabric store. Thanks for Watching!!!

@anthonymassey4222 2 жыл бұрын

Are you still able to find that 3M sandpaper on sale? I've just used my last and can't find it anywhere.

@DeansWoodworking 2 жыл бұрын

I have not seen any in some time now.

@anthonymassey4222 2 жыл бұрын

@@DeansWoodworking thanks for the reply. I guess I should have loaded up on it the last time I saw it but was hoping you knew of someone on your side of town that had it.

@DeansWoodworking 2 жыл бұрын

I sure wish I did, and like you I wish I had bought more when I had the chance.

@garyfestarini9608 2 жыл бұрын

I like the method. I am however always nervous when I see a turner wearing a watch or a ring while turning. I have seen people get caught

@DeansWoodworking 2 жыл бұрын

Thanks for Watching!!!

@williamrusher9974 2 жыл бұрын

You did not say where and what the beard is . Where can you purchase the beard material?

@DeansWoodworking 2 жыл бұрын

The Beard is fake fur and you can get it at almost any craft or fabric store it is also available on amazon. Thanks for Watching!!

@donaldosborn1892 2 жыл бұрын

Looks great but it sounds like you were killing the cat

@DeansWoodworking 2 жыл бұрын

He was upset because I would not let him on the table to help. Thanks for Watching!!!

@jackwagon4313 2 жыл бұрын

Dean what state do you live in?

@DeansWoodworking 2 жыл бұрын

Texas

@jackdurning8637 2 жыл бұрын

Where did you get the fur for the Beard?

@DeansWoodworking 2 жыл бұрын

you can get it at almost any craft or fabric store or on amazon. Thanks for Watching!!!

@jackdurning8637 2 жыл бұрын

@@DeansWoodworking thank you. I am new to this and love your videos I have done lots of snowmen/icicles and the bird hous. Not as good as yours. But still learning. LOL Have a Merry Christmas.

@jackdurning8637 2 жыл бұрын

What did you use for the finish on the Gnomes?

@DeansWoodworking 2 жыл бұрын

@@jackdurning8637 rattle can lacquer