DeLonghi Magnifica Evo bean to cup coffee machine review ECAM290.61.SB EX:2

Рет қаралды 16,935

8 ай бұрын

de'longhi magnifica evo bean to cup coffee machine review #delonghi #coffee #beantocup #magnificaEvo
Thank you to todays video sponsor, a leading manufacturer of PCB boards, CNC, 3D printing, SMD stencils, and much more with amazing value,Fast turnaround and low minimums.
check out the channel sponsor
www.pcbway.com
www.delonghi.com/en-gb/ecam29...
#delonghi #coffee #beantocup #magnificaEvo

Пікірлер: 44

@rinzevnrossum 14 күн бұрын

Nice instruction use video! I bought one last Saturday 6 July 2024. I returned it today, July 8, because the included instruction to set up the machine was a kind of Ikea pictures manual, imo totally unusable and the machine completely crashed after several attempts. The retailer will do their best to get the device working and deliver the machine to my home adress in working condition. What I miss outside of this beautiful video is an installation video (first use). That would be the icing on the cake!

@3DPUK-TECH-CHANNEL 14 күн бұрын

to be fair its fairly simple to setup.... it does request you too carry out a pre start descale. thats a little confusing... hope it works out for u

@rinzevnrossum 14 күн бұрын

@@3DPUK-TECH-CHANNEL Too complicated and confusing for me. The retailer will hopefully come up with a solution.

@Lc-is8vn 3 ай бұрын

Excellent demo 👍 got my machine arriving tomorrow, i cant wait 😊

@bwillzy 4 ай бұрын

Hey did you figure out how to just used the milk for hot chocolates ect?. Ty

@mikemichaels1490 6 ай бұрын

Great video, Joe. I went ahead and bought one on black Friday. I decided to get the one with the automatic frother, and I'm very happy with it. My only complaint is that the coffee (I usually make a cappuccino or a latte) does not get very hot - even on the highest setting. I just microwave it for about 30-45 seconds afterward, and it gets as hot as I like it. I also tried heating the cup beforehand - which also works fine.

@3DPUK-TECH-CHANNEL 6 ай бұрын

Hey thanks for watching you can adjust the temp of the machine. I post a how to guide this week if that helps

@MRAV-bu9ib 6 ай бұрын

Previously, I bought the Anycubic Kobra and found a few videos on your channel regarding 3-D printers and their tuning. Now, I thought, 'It's a great idea to buy a new coffee machine.' I thoroughly checked the technical descriptions of numerous machines, and I chose the Magnifica EVO before I saw your review. So, are you reading my mind? 😯

@3DPUK-TECH-CHANNEL 6 ай бұрын

😃

@nachrichtenausdeutschland4671 6 ай бұрын

god bless u

@mobileworldlimited5127 6 ай бұрын

@BuryAllRivals 6 ай бұрын

Espresso...other than that, great review 😂😂

@TheKevWig 5 ай бұрын

hi. Great vid. If you want a double shot in a drink you have to do it twice i guess which means you have to regrind more beans?ta

@3DPUK-TECH-CHANNEL 5 ай бұрын

I.yes you can press espresso I guess thanks for watching don't forget to like and subscribe 😉

@TheKevWig 5 ай бұрын

ok ta. is there a way of increasing the water temperature up and down? Sorry looking at loads of vids and cant remember if you covered it.@@3DPUK-TECH-CHANNEL

@3DPUK-TECH-CHANNEL 5 ай бұрын

@TheKevWig press cog with x2 next too it and the mylatte button once then the beans light up changed it to the full bean which I'm the hottest setting

@3DPUK-TECH-CHANNEL 5 ай бұрын

The press mylatte again to save setting

@ericdaozero 8 ай бұрын

We buy filtered water for drinking and cooking. So do we need to descale and use provided the filter?

@3DPUK-TECH-CHANNEL 8 ай бұрын

I think you would still need to descale every so often yes... the reason for this is the heating element within the machine will slowly scale up filtered or unfiltered water has the same affect 🤔 I believe. Thanks for watching don't forget too like and subscribe 😉

@ericdaozero 8 ай бұрын

Thank you. 🙏

@3DPUK-TECH-CHANNEL 8 ай бұрын

@@ericdaozero your very welcome 🙏

@iwom31 7 ай бұрын

Can you use vineger to descale rather than the descaler?

@3DPUK-TECH-CHANNEL 7 ай бұрын

This question I'm unsure about I'm afraid Thanks for watching don't forget to like and subscribe 😉

@iwom31 7 ай бұрын

@@3DPUK-TECH-CHANNEL Thank you for replying.

@mobileworldlimited5127 6 ай бұрын

I do all the steps right but my machine shows a red button so what should I do

@3DPUK-TECH-CHANNEL 6 ай бұрын

Can you explain what red button your receiving?

@erahughes 5 ай бұрын

Can l customise the size of the coffee without having the coffee stronger? Thanks

@3DPUK-TECH-CHANNEL 5 ай бұрын

If u press coffee beans to low .. then press coffee and it adds to cup if u press the coffee again it will.stop it at your chosen point

@erahughes 5 ай бұрын

Fantastic. Thank you.

@soneraslan3962 7 ай бұрын

I used nespresso and I found the milk to be a bit cold. I was wondering how warm the milk is this machine ? Thanks.

@3DPUK-TECH-CHANNEL 7 ай бұрын

Comes out really warm but perfect temp to drink you can also adjust the temp through the settings

@soneraslan3962 7 ай бұрын

@@3DPUK-TECH-CHANNEL Thanks 🙏

@3DPUK-TECH-CHANNEL 7 ай бұрын

@soneraslan3962 your welcome don't forget to like and subscribe 😉

@magdzia7580 8 ай бұрын

Hi Can I use sometimes only hot milk If I need more or for hot chocolate?

@3DPUK-TECH-CHANNEL 8 ай бұрын

To be honest I can't answer that one... I I have pressed the my latte and it then dispenses the coffee after, if I find out otherwise I'll reply

@watsonwatson7081 6 ай бұрын

Hi can you tell me how i get a whole cup of black coffee?

@3DPUK-TECH-CHANNEL 6 ай бұрын

If you press on the coffee function it will keep going until you press again

@watsonwatson7081 6 ай бұрын

Thanks I will try that

@jakloum4433 2 ай бұрын

I’m not sure why my machine does coffee first ?

@3DPUK-TECH-CHANNEL 2 ай бұрын

That's odd you press the mylatte yes?..

@grigoraslucian297 5 ай бұрын

Great video, thanks However, for 2 months I have had the same coffee machine, and for the last few weeks, I have noticed a pretty annoying error. At the first cappuccino in the morning not every day, after selecting the drink, the milk froth process starts and after one second suddenly stops with the red triangle warning light, the grounded coffee ready is dumped in the tray whiteout brewing. Once I see that, I turn off and on the machine, sometimes reconnecting the milk dispenser and the light disappears. I've tried to reach Delonghi Support over the phone, I explained to them everything also in an email with pictures, and no answer so far. Today I claimed the warranty and on Monday they will pick it up. Has anyone had any similar issues with this kind of machine?

@3DPUK-TECH-CHANNEL 5 ай бұрын

When you see a triangle with an exclamation mark inside it while selecting My Latte or Cappuccino on the DeLonghi Magnifica Evo ECAM290.61.SB coffee maker, it indicates a warning or error message. Follow these steps to solve the issue: 1. Check the display for any error message or accompanying code. These will provide more specific information about the encountered problem. 2. Make sure the coffee machine is correctly connected to the power source and turned on. 3. Check if the water tank has enough water and is properly inserted. 4. Check if the coffee bean container is filled with beans and closed correctly. 5. Check if the milk container is correctly attached and filled with milk. 6. Clean and descale the coffee machine for optimal performance. 7. If the problem persists, contact De'Longhi Customer Service for further assistance.