The bearing tool is a must for me. I pack it right next to my skate tool.
@SheriffHortixoon6 жыл бұрын
What people should know is this tool is, [EDIT - useless] kind of pointless, if you using bearing spacers. the chamfer on the bearing and spacer are too fine to allow the puller bearing ball to lock behind the bearing to pull it OUT....
@brendan60934 жыл бұрын
Correct i didnt no this at the time. To bad mine broke after a few days the steel insert with the balls in it slipped out the white T handle.
@malcolmandfeliciabiles58293 жыл бұрын
Not useless, but rather only 50% effective when removing a bearing if you use spacers. You pull out one bearing by some other means, then use the bearing tool to pull out the other. It is also still effective when inserting a bearing.
@SheriffHortixoon3 жыл бұрын
@@malcolmandfeliciabiles5829 I did mention 'if you using bearing spacers.' ;)... ...sure, but then you may as well pull the 2nd bearing out with the same method as the 1st... no point.. Make no mistake, it is a gorgeous looking tool man, I (still) have 2. ( men n' their tools aye.. )
@chilli-iceolive-abode24473 жыл бұрын
@@SheriffHortixoon I'm glad I read this! I'll just carry on using an Allen key to push bearings out like I have for years. I spose this should still help for fitting bearings which isn't usually an issue, but I'm thinking of trying out some new aluminium core wheels and I've heard they're a pain in the backside. Thanks!
@zaekindaday8 жыл бұрын
This is so helpful. Thanks man.
@Sl4sK3toRzK3 жыл бұрын
The thing is , if you use your axles to pull out the bearings - it can (sometimes) wear out the threads on the axle. But i’m currently also using my axles.. And if you’re using spacers it can be quite hard to get them out, to say the least.
@the_gyaani_sunny2 жыл бұрын
From where we can buy this? I am from Ahmedabad, India
@palleh7742 Жыл бұрын
Can the big bearing tool remove bearings when spacers is used?
@DerbyWarehouse Жыл бұрын
Yes, just be careful for the spacer
@idmhead0160 Жыл бұрын
For pushing the bearings in, it seems like the design of the tool isn't the greatest. One would think it would be better to push the bearing in using the outer piece of metal, rather than the inner one. I use a 5/8" socket with a socket wrench, which happens to be just the right size. I set the wheel on the floor. I get the bearing started. Then, line up the socket on top of it and push it in with that.
@wild_nugget43293 жыл бұрын
You know you can just use your trucks to take them off
@idmhead0160 Жыл бұрын
Yeah, and possibly damage the bearing in the process because you need to pry it an an angle
@idoscoveredbass97293 жыл бұрын
but why bro just use the trucks
@mikepancake7432 жыл бұрын
This pulls bearings and pushes them back in. Your truck threads get all fucked up doing this. The bearings have hardened steel races. The truck isn't hardened on thr threads. Put side load on the threads and you mash them.. Why create new issues
@tncountryboy069 ай бұрын
Problem is. Bearings do NOT come out that easy, and the tool slips out of the bearing easily
@thetony19736 ай бұрын
This tool is useless if you have spacers fitted......the ball bearings cannot eject behind the inner bearing core when you push in cos the spacer is butted up against it.....rendering the tool useless, great if you don't rock spacers but you should be.....
@elonce014 ай бұрын
Man that thing sucks. Only works if your not using spacers. Waste of money, just use your truck
@ObtuseAcute110 ай бұрын
I would be scared if my bearing came out that easily of my wheel 😲