DeWalt DCF682 vs DCF680 Gyroscopic Screwdriver comparison

Рет қаралды 74,858

allritythen

Күн бұрын

In this video I compare the differences between the DCF682 inline vs the DCF680 foldable screwdriver.

Пікірлер: 64

@dathaniel9403 Жыл бұрын

I really appreciate people like you, who put out short, informative videos on topics like this. I wanted to know what the differences were before I bought them and now I can make an informed purchase. Thanks!

@PBandJsandwich 3 жыл бұрын

Thanks for taking the time to make this. I don't care about the fold or torque feature, but I want the ring light. Wouldn't have known about that without your vid. Thanks again.

@leohiggins7737 4 жыл бұрын

Thank you for your fine demonstration.

@jacobsmithjr 3 жыл бұрын

Thanks for the explanation I'm definitely getting the foldable one now

@leohiggins7737 4 жыл бұрын

These are great, many screw guns don’t have the soft start and it I’d hard to start a small screw when it starts so fast. This gives you total control. I just ordered one, I do a lot of repairs etc and this should be perfect, it Also has the best batteries also.

@daveb7999 5 ай бұрын

Excellent review, thank you! I appreciate that your video is so detailed, I can now make an informed purchase.

@olafou 5 жыл бұрын

Needed this thanks! Wasnt sure if I should renew the 680 or just get the new 682..

@jeffk2481 4 жыл бұрын

I have them both and I'm kinda obsessed with them

@MaquinasDePalomitas 4 жыл бұрын

I’ve had the 82 for the longest time and I totally love it!!! About to order the 80 just to have another one.

@rick3301958 3 жыл бұрын

Excellent video. Just what I needed. Taking back straight one! Need foldable!

@JMWexperience 8 ай бұрын

Nice review! Thanks so much.

@roberthaines6409 3 жыл бұрын

Man, I have had the folding one for probably 4-5 years and just always thought it didn't work. Never occurred to me to turn my wrist. Unbelievable!!! Thanks for the video!

@roberthaines6409 3 жыл бұрын

I guess next time I'll read the manual.

@LongIslandicedteaaa 3 жыл бұрын

LOL

@martienpost2234 3 жыл бұрын

You joking right?

@roberthaines6409 3 жыл бұрын

Nope, true story. Only had one electric screw driver before and it didn't have a gyroscope in it.

@philmcclenaghan7056 3 жыл бұрын

I just can't begin to imagine what goes on inside other people's minds

@slothin21 Жыл бұрын

Thanks for this

@HerbanWarrior 6 ай бұрын

I get he doesn't have that many views, but serious how is there no comment about delicate screwing? 2:26

@AbangAbangan 3 жыл бұрын

amazing tools..

@AdultshopitCoUk 5 ай бұрын

Great video did not know it turns into a gun as well

@adolfosanchez1868 5 жыл бұрын

thanks!!

@Knapweed 4 жыл бұрын

Doctor Who would be proud. 😎 Good review!

@MrJoefoefrombuffalo 2 жыл бұрын

Please consider doing a review on the flashlight that uses the same battery

@N269 Жыл бұрын

I have one, but the palava to get one in UK is brain numbing... Dewalt US seems to have the toys and Dewalt UK seem to be the back-markers. Besides that, even though your great video is 4 years old, these little units, if you can find one, are twice the price you stated... in GBP numbers! UK/US trade is a joke. But, nice toy. Nice video.

@liononline84 3 жыл бұрын

Thanks for the review. That was really helpful, but you didn't say about the torque!! The right one is the torque power fixed on it?? Or how it works? Because the left one you can change it but the right one doesn't have a clutch!!

@thekoolkor3an 5 жыл бұрын

will that bit holder fit onto the dcf682n1 also?

@tuckermcneese239 3 жыл бұрын

Does the DCF680 and DCF682 have the same amount of torque? I can't find a comparison online. Thank you in advance.

@geefim2144 3 жыл бұрын

The adjustable handle says 60inch/lbs and other says 23inch/lbs. Though the adjustable handle says 1.3ah battery and the other says 4ah battery.

@sanchoancho6510 2 жыл бұрын

Will you come to tucson Arizona and fix interstate 10. Thx

@jonhill373 2 жыл бұрын

Quite possibly the only electric screw gun with variable speed and soft start and stop.

@culturehorse 2 жыл бұрын

Hi I have drill into hard surfaces to install a barrel bolt on awood door and the clamp housing it slides into to lock the door, on/into a hard metal door frame. Is this a power tool that you think this will do the job of drilling with a hard drill bit into the wood and the metal? If not what is a good recommendation for a under 50-100. drill tool. Thanks / great review / new sub > nyc

@allritythen 2 жыл бұрын

You might be able to get it done if you go slow and might have to recharge the battery. This tool was made mostly for small tasks around the house. Drywall screws and the like. Maybe an occasional hole in some thin wood. If you use some self tapping screws, you might be able to get it in the metal with ease.

@jerrysweany278 3 жыл бұрын

The foldable one appears to be a bit smaller? Need room in tool bag. Bought one but battery is not staying in properly so unless I put the heel of hand to hold it tight it won't work.

@philmcclenaghan7056 3 жыл бұрын

No, didn't you watch? The one on the left is larger. That one is foldable

@Angelo0chek 2 жыл бұрын

Did you compare, are they comparable in terms of torque?

@allritythen 2 жыл бұрын

Yes. They will both drive a three inch wood screw no problem. Only difference is folding or not.

@davidwiniger3799 4 жыл бұрын

Which has more torque?

@allritythen 4 жыл бұрын

I believe they are both the same. Only difference between the two is that one can switch to pistol grip.

@jimbrausky 5 жыл бұрын

I love the screw driver. But I still don't see the point why push a trigger and also you have to twist hand. Double work. I wish they had just a trigger version.

@Reflekt3D 5 жыл бұрын

if they only had a trigger (no hand twisting) then you would also need a forward/reverse switch, as found on many other guns.

@raymonddompfrank1789 5 жыл бұрын

When you pull the trigger, you fix the zero position from where you rotate. You have to give the starting orientation to the tool somehow.

@CF_Joel 4 жыл бұрын

I thought the same thing but Oh, it's great. So convenient.

@ROYteous 3 жыл бұрын

The way you use the 'trigger' is you basically just hold the tool, which you have to do anyways, with or without a trigger. This just allows for immediate changing between forward and reverse, without messing with an extra switch.

@carterscustomrods 6 ай бұрын

Great concept, but horrible manufacturing. I'm on my 4th one in 26 months. I'd happily pay 2x the price if they were made better. But that's been the sad case with Dewalt as a whole since 2018.

@piotrbiernat 4 жыл бұрын

Which is better?

@allritythen 4 жыл бұрын

all depends on what you are going to use it for. I would get the DCF 680. Light is better and you can fold it.

@piotrbiernat 4 жыл бұрын

@@allritythento montage furniture

@peacelesssam 5 жыл бұрын

Uh, the trigger is on "top" of the 680 but you know you can just turn it over right?

@SoldierMed68W 5 жыл бұрын

peacelesssam it’s molded to fit in your hand with it on top. If I got two left shoes I can just put one of them on my right foot, but it’s more comfortable to use them like they’re designed...

@htorres236 3 жыл бұрын

Hilarious

@jamessutton9476 4 жыл бұрын

If the inline had a clutch, it would be my first pick

@samkim8451 3 жыл бұрын

No power I have 1

@danmorgoshi7598 4 жыл бұрын

...uhmm....yea...everything sound"good"....Of course..I "want" it something like that..for a couple years...without any problems...but..at the end..when you need it..the "gyroscopic" doesnt work..and a lot of problems start.....and finally I have to throw it away...Better to use my old fashion tool ...they never fail..../.

@mdeamicis 3 жыл бұрын

Are you saying that yours failed you? Or are you theorizing?

@danmorgoshi7598 3 жыл бұрын

@@mdeamicis ...That tool ..is new..Personally before buying any tool I read many reviews...(as much as I can) I got a couple tools...different brands..but the one I trust is makita's tools (special the one made in japan.Never fail) I put my hands on fire (for makita), and I know I dont burn./.

@philmcclenaghan7056 3 жыл бұрын

@@danmorgoshi7598 that is just brand loyalty. You just picked a name and fell in love with it with no evidence. Also, why do you talk so weird with lots of dots? Very very strange.