Dewalt DCF900 1/2 high torque vs: Milwaukee 1in impact round #1

Рет қаралды 73,060

jdogdiesel

Жыл бұрын

Пікірлер: 157

@juanarmendariz9943 8 ай бұрын

These power tools are getting better and better. I hope this rivalry keeps going.

@jdogdiesel7242 8 ай бұрын

Dewalt already released another new 1/2in drive impact even more power than this 900. The dcf921 , I pick mine up Friday. The 900 is killer. I've beat it to death and it never missed a beat. Can't wait for the 961

@juanarmendariz9943 8 ай бұрын

@jdogdiesel7242 can't wit for the review!

@saulcastellanos 5 ай бұрын

@@jdogdiesel7242Milwaukee it’s the best ,

@tdotw77 3 ай бұрын

The dcf921 is an Atomic version not a full size high torque. It is very powerful, especially for it's small size. I'm still using my 899 but the 921 is very close to it. The dcf961 is on another level for sure. It's definitely pushing the limits on a 1/2" drive anvil, and should be a 3/4 with that torque. It just beats the f'k out of a 1/2” sockets socket! Needs the extra material of a bigger anvil for sure. But I do love them all, DeWalt ftw!. DeWalt seems to be a lil slow but definitely makes up for it with their machines! Between @TorqueTestChannel & @deandohertygreaser (amazing repair tech in Ireland), & a few others videos\analysation, I'm happy I went with the yellow team years(decades) ago! Don't get me wrong, Milwaukee definitely has some nice tools, especially some of the more specialized tools they make. 🤔🤷🏻‍♂️🛠️🔧🔩👍🏻👌🏻🔌🔋⚡⚠️🦺🚧

@92174164 Жыл бұрын

Got the new Dewalt,, it's a monster, no sweat removal wheels on kw t800

@saulcastellanos 5 ай бұрын

Cuál Dewalt es ?

@Stax0- Жыл бұрын

Every time Milwaukee tried to one up dewalt, Dewalt comes with something even more insane 🤣🤣🤣

@jsaction33 Жыл бұрын

Trighting torque and breakaway are completely different. You can usually take a nut off with something half as powerful as you need to tighten it.

@jordanalexander615 Жыл бұрын

@@jsaction33with road grime it's the opposite. And DCF 900 has more in forward anyways. It could easily over tighten it.

@AnontheGOAT Жыл бұрын

You realize Milwaukee has been dominating the impact game for a long time right? It’s about time DeWalt came into the foray.

@jordanalexander615 Жыл бұрын

@@AnontheGOAT well they were two years or so ago. But Bosch actually put out a high torque that beat Milwaukees a few years ago but you never hear about it. And so did Ridgid but it's the same company owner.

@AnontheGOAT Жыл бұрын

@@jordanalexander615 I’m talking about an entire lineup of these types of tools. All mechanics I know, both diesel and auto, all have been using Milwaukee for like the last 10 years because of their lineup.

@James-ut2ez Жыл бұрын

I love my DeWalt it was worth every penny

@Stax0- Жыл бұрын

Me too just picked up one today it’s a huge upgrade for me I was stuck on the ryobi impact wrench

@InChristAloneForever 10 ай бұрын

DCF961 is coming boys!!!!

@ia6980 8 ай бұрын

When

@TheTate182 7 ай бұрын

@@ia6980it’s already out and is an absolute monster

@daniellepage2923 7 ай бұрын

I have one DCF961B. It’s unreal. Kinda expected it to be a flex voltage 60v but it slaps.

@daniellepage2923 7 ай бұрын

@@ia6980it’s 569.99 on Amazon

@saluki417 6 ай бұрын

I'm scared to see what the dcf999 will do

@deanmoser8788 6 ай бұрын

i need that for customers drain pans, thanks!

@Oddman1980 2 ай бұрын

How is work at the Jiffy Lube?

@steveiliev8912 3 ай бұрын

And one more thing! You can handle all that power with one hand! DeWALT’s new commercial should be : “Even wimp can do it” 😂

@tristanmiller8852 Жыл бұрын

The better test would be tightening it with the Dewalt then see if the Milwaukee can tighten it more

@russellwatts4784 Жыл бұрын

Torque wrenches are primarily used to loosen/remove lugs/bolts. Their tightening power is an after thought.

@Willyd2758 Жыл бұрын

Of course it can tighten it more. It’s a 1” impact lmao.

@darrenhenderson7076 2 ай бұрын

That's both sad and amazing at the same time need to update that big Milwaukee gun with bigger springs and hammers

@chlesaxemini8840 4 ай бұрын

Wow. The old 2nd gen Milwaukee high torque can do that too

@ILikeToWatchTodai 10 ай бұрын

That 1" Milwaukee has speed and torque settings adjustable in the OneKey app. The one inch Milwaukee we had at the last shop I worked in was de-rated enough that my little 1/2" duralast gun from AutoZone could outpace the Milwaukee.

@Blu.86-te1pr 6 ай бұрын

Just picked up my DCF900. It’s an absolute beast!!

@Xv1p3rCr0 6 ай бұрын

How much $$$

@Blu.86-te1pr 6 ай бұрын

It was on sale at Home Depot for 275. Usually 350.

@JAMESYBOY. Жыл бұрын

Damn that is pretty strong

@Pokemonnostalgia1991 Жыл бұрын

Cant wait to get one

@420sippin 3 ай бұрын

Iv got DeWalt DCF900 I love it use it every day at work

@Bignardo18 9 ай бұрын

3 words ....torque test channel

@pjhall4380 8 ай бұрын

Absolutely. While that dewalt was the highest rated 1/2 inch high torque ** TTC uploaded a video a couple weeks ago testing big reds new 1/2 inch high impact and putting it against the dewalt** the dewalt does not in any way compare to the “Gatling Gun” this video is very misleading.

@jordanhinderliter3784 7 ай бұрын

@@pjhall4380and now dewalt has the 961 go watch that video

@jordanalexander615 Жыл бұрын

Only downside it destroys sockets. If it were 3/4 drive it would vibrate a lot less too. Hope they make one in the future.

@jdogdiesel7242 Жыл бұрын

I 100% agree! Thats its only flaw is it kills sockets. This with a 3/4in anvil would be perfect.

@williammcconville4967 11 ай бұрын

@@jdogdiesel7242 just buy lifetime guarantee sockets

@darrenhenderson7076 2 ай бұрын

3/4 inch's comes out this summer

@harisyoung4110 Жыл бұрын

This dewalt capability is so mind blowing.. but can you do another test but with the m18 d handle fastening at more than 20 second ?

@jdogdiesel7242 Жыл бұрын

Yes sir! Check my channel out , i have a few other videos of both impacts showing just that

@jdogdiesel7242 Жыл бұрын

kzfaq.info/get/bejne/pp1nmpqlr5jLf5c.html

@jordanalexander615 Жыл бұрын

Hopefully not 20 second on a truck but that will be roughly 1200 ft pounds. Wayyy over torqued.

@williammcconville4967 11 ай бұрын

@@jordanalexander615 tighten till slack and half a turn back is the rule

@jordanalexander615 11 ай бұрын

@@williammcconville4967 we just use a torque wrench. Or have someone with a torque gun do it if we're out on the road. Had enough studs stretched for my liking.

@David.. 11 ай бұрын

I have no idea why I watch these videos. I have a 1/2” Ryobi which is more than what I’ll ever need working on my own rust and corrosion free vehicles that I’m religious about maintaining but holy shit I’d love to have one of these.

@jdogdiesel7242 11 ай бұрын

Life's to short , get it and break some bolts. Maby crack a socket or two lol

@Techprep23 Жыл бұрын

The question would be how much torque did the Milwaukee D handle put on the fastener versus what the DeWalt can take off. And what is the proper torque specs for a semi lug nut

@jdogdiesel7242 Жыл бұрын

This is not meant to be a how to or educational video on tightening lug nuts on a truck. Simply showing a common impact used for truck lug nuts the Milwaukee 1in extended anvil, compared to a much smaller impact the dewalt 1/2in drive dcf900 which is not really intended for this. The torque spec for these is 500ftlbs There is more videos to come with both of these impacts and more! Thank you for the comment and watch for round #2 coming up next week

@chrisz1100 Жыл бұрын

450-500 ft lbs

@TheTinkle1 Жыл бұрын

450 ft pounds

@Lithium023 Жыл бұрын

I recently bought the dewalt mid tourqe that puts out some very good number but might buy this one soon for when I need extreme power. Might be a rare occurrence but I will be super happy I have it I'm sure.

@jdogdiesel7242 Жыл бұрын

Yes the 891 mid torq is super powerful for its size! Im looking to get that one soon to fill out my collection. This 900 works for everyday 1/2in impact jobs , doesint fit in everywhere as its pretty big. BUT It will eat up sockets and bolts without breaking a sweat. It beats the 3/4in dewalt and 3/4in Milwaukee by far! Its a wrist breakin bolt snappin animal. I cant say enough good things about it, even the bad things are still good lol

@jdogdiesel7242 Жыл бұрын

I have other videos of the dcf900 on my channel as well. Thanks for watching and the comment

@jordanalexander615 Жыл бұрын

Wait for the new one it's even more powerful. The torque test put it at 1000ft pounds and that's on a Dyno. It's a monster.

@loucifer4205 Жыл бұрын

Dewalt will be coming out with their 1inch impact wrench soon and its going to make the Milwaukee look like toy

@jdogdiesel7242 Жыл бұрын

Yeah , the dcf900 makes all of Milwaukee's 1/2in "high torq" and 3/4in impacts a joke too. Ill be happy to see a 1in drive dewalt. And id def have to get my hands on one as soon as they release here in the states.

@jordanalexander615 Жыл бұрын

@@jdogdiesel7242what stinks is Milwaukee 3/4 drive uses the same internals as the 1/2 inch. So basically just the same tool but isn't as hard on sockets.

@solomonshv Жыл бұрын

makita's 3/4" is even more insane. it beats this and puts up similar numbers to 1 inch impact wrenches while being a fraction of the size and weight. both are amazing tools. i personally went with the dewalt because i don't need 1000ft-lb working torque, nor do i want to spend crack prices on 3/4" impact sockets

@jordanalexander615 Жыл бұрын

@@solomonshv DeWalt has one with 1000ftlbs that's half inch drive now. But I don't think its available for public purchase yet.

@jnmc-vx4fw 9 ай бұрын

@@jordanalexander615 1050 tighten 1400 nut bust

@jcaaa5w837 10 ай бұрын

That’s insane

@russellwatts4784 Жыл бұрын

Dewalt fan here, so I’m biased. But having that extension on the Milwaukee lowers it’s torque output. Try it without the extension.

@jdogdiesel7242 Жыл бұрын

That is an integral part... Its the extended anvil 1in d-handle impact.

@williamsanders468 7 ай бұрын

That extension on it is there because it’s meant for big trucks like these, if you go to the rear wheels the lug nuts are much more recessed than say a normal car. But I believe Milwaukee does sell this tool that doesn’t have the extension.

@BenJamin-ou7kd Жыл бұрын

Can you take half the lug nuts of with each impact to see which one actually takes them off ??

@jdogdiesel7242 Жыл бұрын

Thats a good video idea! I have more videos of these two impacts vs truck lugs on my channel. Please check them out as well Thank you for the comment

@jordanalexander615 Жыл бұрын

I bought it at Lowe's in a kit before they even announced it lol

@krapeevids6992 Жыл бұрын

DEWALT !! Gotta get me that bad boy

@johnathangreay987 11 ай бұрын

DeWalt works in space too. On the international space station.

@MR70726 Жыл бұрын

I am waiting for the next video

@jdogdiesel7242 Жыл бұрын

New video uploaded today sir and more to come! Thanks for commenting

@jdogdiesel7242 Жыл бұрын

Another 1in Milwaukee vs dewalt 1/2in video uploaded today

@dariusstack Жыл бұрын

I got tthe same model worth every dollar spent 💪💪💪💪🤣🤣🤣🤣

@jdogdiesel7242 Жыл бұрын

I 100% agree!

@barrymonroy7138 8 ай бұрын

Nice!!

@Weldoholic 2 ай бұрын

Must have that one key setting turned down lmao

@beasyphone 8 ай бұрын

Can't believe this still has traction lol. I own the newer 961, and my little old 2864 is still my go to. I have the 2767 not the newest 2967 and it's great but in semis, why f- around, the 2864 is a end all be all and my 1" is air until I get the balls to invest in the IR platform . 900 was a good gun but more for normal car shops in my opinion AND personal xperience , same with the 906. Loud , violent, QUESTIONABLE reactions to whether it's going to function or just knock your wrist around. .no thanks- I brought all my yellow stuff home for toys. (Except the 961) I just got that sucker Wednesday. Gotta atvleast get it dirty lol

@bahadryldz2346 Жыл бұрын

Merhaba milwaukee onekey üzerinden hızı veya torku düşürülerekmi test yaptınız ?

@crazycajunman1992 7 ай бұрын

Torque test channel can give you all the info you need on what all the name brands can do and can’t do is suggest watching them because even the battery you are using causes a huge difference

@beckyhuertas 2 ай бұрын

What are you showing on reverse those tools have more torque

@CarlosHernandez-ng7ne 10 ай бұрын

Y x q la misma tuerca y no escogidos otra tuerca

@kimroyful 8 ай бұрын

I bought one today didn't brake the lugs

@PhillyRacer121 11 ай бұрын

Those Milwaukee 1” guns apply torque weird though. Try a 1” air gun with good air supply and then try it. Or maybe actually put the steer tire on the ground and then torque to spec 450-500ft lbs (we’ll just say 475 and split the difference).

@kylebrown8891 7 ай бұрын

Well assuming the Milwaukee is set to torque at 475 ft pounds before it shuts off I’m not impressed.

@eoghanhennessy443 Жыл бұрын

I want to know were to get the new batterys with rubber bottom any links please the standard are falling apart

@jdogdiesel7242 Жыл бұрын

Most all Mac brand 20v batteries are just like this. But dewalt has them as well. They are the grease/oil resistant packs. I believe you just add a - "G" at the end of the battery model number for dewalt

@jdogdiesel7242 Жыл бұрын

This 5 ah battery is model number - DCB205G Also they are available on amazon and other retailers online After running these on my 20v stuff and getting the 3ah and 5ah versions for my 12v stuff as well , I'll never go back to the regular packs. These are super rugged and are sealed up really well. Perfect for mechanic work or outside work

@dalebassett6119 10 ай бұрын

I have the dewalt dcf900 the 18v cannot find the 20v version anywhere is there much ft lb torque difference? Mine has 1898 nm breakaway torque

@jdogdiesel7242 10 ай бұрын

Same. In the usa its 20v or 60v , outside the states its pretty much 18v or 54v for dewalt packs

@dalebassett6119 10 ай бұрын

@jdogdiesel7242 one wonders in what country would the 20v version be available if its not in the us either 🤔

@jdogdiesel7242 10 ай бұрын

@@dalebassett6119 the 20v lithium packs are the same as the 18v lithium packs outside the us. And the 60v packs or flex volt are the same as the 54v packs outside the us. Now , the old male connector style 18v packs inside the us do not interchange onto the newer 20v/18v lithium tools.

@dalebassett6119 10 ай бұрын

@@jdogdiesel7242 makes sense

@memphis6694 6 ай бұрын

This literally proves nothing 😳. I wouldn’t be surprised if a 3/8 Impact (with a little more time), took that back off.

@Mr_Gabbles Жыл бұрын

This isn’t even a comparison. A freshly torqued lug isn’t one that’s been on there for a season or more of road salt and more

@jdogdiesel7242 Жыл бұрын

I have a few videos of this impact vs: truck lug nuts. Some were very rusty and had been sitting for years. All 33mm semi lugs. 1 video of the white freightliner fld steer , the last lug was damaged bad and threads were ate up. It still pulled them off.

@jdogdiesel7242 Жыл бұрын

kzfaq.info/get/bejne/qpedm6aUnb6ypZs.html

@jdogdiesel7242 Жыл бұрын

The video above is of the freightliner steer lugs. This video that ive copied into this reply down below is one of the most viewed i have , and the 1/2in dewalt goes behind the Milwaukee 1in on some painted rusty lugs , the Milwaukee was on tighten and i made sure to hammer on em more than previously. kzfaq.info/get/bejne/pp1nmpqlr5jLf5c.html

@Lynxhmob702 9 ай бұрын

Hold that one inch on there for 10 seconds then see how she does

@jdogdiesel7242 9 ай бұрын

I have a video of doing that on my list. Check it out!

@biglazi8243 6 ай бұрын

Me and my coworker both bought a DCF900 at the same time. Mine started cutting off while using often. So i warrantied it. A week before I got mine back. My coworkers started doing the same thing. I’ve never had an issue with a milwaukee

@dewalttools3569 10 ай бұрын

👍

@SimonElenor Жыл бұрын

And the point being?

@jdogdiesel7242 Жыл бұрын

Just showing the new dewalt 1/2in is no slouch . Anything ive put on with the Milwaukee 1in gun this dewalt will remove with no issues. I have more videos with both of these impacts on my channel . Thanks for the comment

@DABEAST691 Жыл бұрын

Fyi that Milwaukee puts out 1900ftlbs and the DeWalt is only rated for 1600ftlbs

@solomonshv Жыл бұрын

"rating" numbers are trash. that 2868 1" wrench only puts out 1200 foot pounds forward, 1400 reverse. the dewalt's actual numbers are 800/1000. makita's 3/4" gwt01 does 1000 in both directions, it's 3 times smaller and lighter than the milwaukee. unless you're working on railroads or something, the milwaukee seems pointless these days. if for some unlikely reason you do need insane power, there is a 1" ingersoll-rand at about the same at the milwaukee that completely shits on it. the ingersoll is "rated" for 3000 foot pounds, which is obviously nonsense. but it can actually do 1800.

@DABEAST691 Жыл бұрын

@@solomonshv "actual" ratings are trash. I just watched a video where a guy loosened a 1800ftlbs nut with the dcf900

@joshuafigueroa6 8 ай бұрын

Now finish up two or three more, than check out the battery.

@didyougetem 10 ай бұрын

Milwaukee loosen it for Dewalt

@jdogdiesel7242 10 ай бұрын

The milwacky was set on tighten. I have more videos of the dcf900 dewalt going behind the milwacky 1in gun and pulling off anything it tightened.

@justinshannon-wangler6229 Жыл бұрын

Do it all day

@angelrojas5444 Жыл бұрын

DeWalt better

@daniellepage2923 7 ай бұрын

So this is clearly a shit test. With very few stable variables. And that cordless wheel gun will trash that 900. But the 961 is on par with it for 25% the cost and 1/2 the size.

@Gtbie_ 6 ай бұрын

Def 961

@WathiChafoo Жыл бұрын

What is the point of this demonstration?????

@jdogdiesel7242 Жыл бұрын

Just showing a common truck wheel lug impact - the Milwaukee 1in extended anvil , and showing a much smaller impact the new 1/2in dewalt high torque thats not really meant for truck wheel lugs , remove them with no issues. I have an even better video on an old abandoned truck with rusty lugs its now up on my channel. Thanks for commenting and there will be much more content coming up

@jwanilpatel3223 Жыл бұрын

Sale chutiye tu bhikari hai tuhje is baat se kya lena dena .

@andreb6175 Жыл бұрын

🗑

@jdogdiesel7242 Жыл бұрын

I have more videos on both impacts , and alot more on my channel. Thanks for the comment.

@HarleySLA Жыл бұрын

Im guessing the implication is the video is trash by the emoji posted but fuck it, if you enjoyed making it and it's not click bait then keep em coming. By far not the worst video I've seen, has substance to it at least. No one is ever happy on the Internet.