This guy deserves way more views for putting in a legit 100 deck screws just to entertain and inform us.

I appreciate that you drove 100 screws into wood to test it out for real.

Damn you covered every corner of questions.. Appreciate the content.

Nice to watch a well paced video from someone knowledgeable and articulate who did his homework ahead of time !

Handy adapter for someone who has a 1/2" impact and no 1/4" impact. Great review.

seriously its one of the best tool review i ever seen.. covers almost all aspect if a tool and genuinely spot the light to the goods and bads.. thanx alot

Before I ever buy a new tool, I look here first to see if you've tested it. Apprentice iron Worker here, I need my tools to be tested tough. Keep it up sir. Make my life a HEAVEN WALKER

Nice simple review highlighting the pros and the cons. Thank you and keep up the good work.

Finally got me one of these love it on the DeWalt 894 the slower rpm makes it really effective hardly impacts when setting 3" screws!

These are pretty awesome. Set your impact wrenches down to speed 1 or the lowest setting and you will be good for years. I’m debating about dumping my impact driver and just using this instead. I rarely use a driver so it makes sense for me.

Rated 167 ft-lb. That's what I was looking for. Thanks. Great video.

I use one from Irwin on my makita dtw281, at speed 1 (weakest), and no problem at all. The point of using this adaptor at full power is not breaking the adapter but at full power/speed I have no control over the little philips screws. So using in speed one is not only good for the adapter but for the work you are doing. 2600 rpm and 280nm of torque on a philips head is very easy to mess everething the screw the wood the adapter :). Very good video

Thanks for the review man I've been looking for this adapter for a whole day xp

I have owned that adapter for a few years and it's still working fine. I have both the Ryobi 1500 in lb driver and 200 ft lb 1/2" and the use of the adapter for me is when I am installing several long torx head lag bolts such as when connecting beams or securing trusses.

Wow!!! What a review! Thank you so much for all that effort! I'm been working on getting one.... But I read all the reviews and they say the same thing...they don't last. Now I know exactly what to get the Milwaukee, it says that it last 15 times more... And I'm just going to use it when I really need it... Thank you once again!!!

I've had this adapter for nearly a year now, It works really well at taking off rusty brake rotor screws, and as you know the reverse torque is higher than forward torque, so i'm not sure why people would not think it's not a durable tool, I used it to drive 4 inch screws into our deck to secure a ladder for our pool, also no problem. I will say it's probably not a good idea to use on drywall though.

You addressed everything I was looking for

currently been using this for my dewalt high torque 899 impact wrench to drive 150mm batten screws into 100x200 hardwood posts soo much faster then a standard impact driver

Exactly the review I needed to see!

Saw this at Lowes for dirt cheap. Picked one up and rewatched this video. Thanks for the warning about how much torque it can handle. I'm using it with my Ryobi cordless 1/2" impact later. On setting three, it would break the adapter. I'm going to be using this adapter with a Forstner style bit, and my impact driver for driving screws. It's nice not having to switch bits all the time. It's also nice not having my screw driver bits shoot out across the room and get lost.

Best video I've found so far. However as a contractor what I'm really interested in is how the impact wrench works with long structural screws. None of my impact drivers can drive a 10" GRK without numerous "run ups!" Thanks.

Thanks for your time and effort. Great work

awesome review I was looking for this adapter for a long time I have drills but that is a perfect adapter .. thank you .. and by any chance can you make a review milwaukee fuel vs ridgid x5 brushless? to see which perform best I have fuel but I heard ridgid is more powerful

Thank You for this video! 💪 My solution will be to buy an Impact Driver since I work in roof installation 🏠

Thanks for the detailed review

Very informative video! Thank you.

Really amazing review

Nice video. My impact driver broke, and I have to buy a new one to finish my shed build project. However, I usually work on cars and sometimes I do woodworking. So I thought buying new impact wrench is more cost effective.

Damn, bro,,,,,u honestly,sincerely,do a good friggin job.on your vid's. and I've been replacing all Dewalt,and Porter Cable with Milwaukee !!!! first cordless impact, a Dewalt DW059 hog ring, was O.K. but my Milwaukee 2763, wow, ,,, hope u get special deal's. up to 4 model's of Milwaukee impact's. alone.

Great review, Thanks.

Great video mate - for those brothers in Australia also consider the 'Kango HYPERTORQUE ½” TO ¼” IMPACT WRENCH ADAPTOR' ~ $25 AUD from Bunnings

Great video

The bit breaker 5000

thanks for the info , i have two did not know it like that

i have a dewalt dc925 and i want to know can i turn that into an impact drill

I know this vid is 5 years old, but its great! I can only afford one tool right now and I want something that I can use for automotive work but also general DIY and basic home repair. Would you recommend I use an impact wrench with this adapter, or an impact driver with a socket adapter???

So I have a question that I can't find the answer to.. I'm a contractor and have the fuel one key impact driver I use daily. I also do some light duty mechanic work on my cars and trucks in the form of wheels and tires, suspension work, ect. I own the fuel 2763 impact and use it for lag bolts, structural bolts in steel, ect. I'm wanting to get a compact impact wrench for the small mechanic stuff (tires, smaller bolts ect) but not sure if I should get an adapter for my one key impact driver, or get the one key 1/2 impact wrench. What is your recommendation knowing I already have the 2763? Thanks so much

Well-done video!

Excelent review

Thank you !!! 🙌

Great review 👍

Right at the end I was thinking throw this on a air impact driver and have a beast deck screw driver but limited to 100ft/lbs sorta ruins that idea

As an “occasional user” of both an impact driver and wrench, this was the best option for me.

Can you hold the collar while screwing down anything?

Is there a video reviewing a 3/8 to 1/4 hex adapter?

So this adapter is no good for the heavy duty impact wrench?

A DeWalt adapter that my DeWalt DCF899 will shred in an instant...perfect!

Any adapters that make a impact driver like a Bosch freak?

I have the Ryobi P261 impact wrench, rated at 300 ft/lb at high setting (high, mid, and low). I am thinking about getting the adapter and use at lowest setting which probably means less torque, will this adapter be destroyed?

درود بر شما متشکرم اقا

Thanks Danny-------

Will this work with DeWalt DCF809 20V Impact driver? I want to use the Impact driver as a drill. Thank you.

Thanks

do you if something like midtorque impact wrench like milwaukee 2861 can be used with this adapter on very low rpms. according to manual its documents.milwaukeetool.com/58-14-2860d1.pdf does only 0-510 rpms on first speed,hence the torque should be lower and ok for this adapter?

Daniel gracias por el video, una pregunta que modelo es la herramienta de impacto por favor..

thanks

great review

I wondered when someone was going to come out with something like this. The only problem I see is the wobble at the bit. Starting screws is more difficult. I'd get one but I have an impact driver that I just put a socket adapter on and it does just fine for me.

I like good envencion.

another nice job

I like this adapter but I think I would get the milwaukee 3/8" drive to 1/4" hex

I wish he had put that into the Skidmore with and without the adapter to measure torque loss.

I need a 1/2" female "square" to a 3/8" female "square" adaptor for impact wrench know of one?

Thx for nice review Thumb up n sub Keep gd work

Only use it under 150ft/lb torque. Lowest power is most sufficient for driver bits.

I used it to predrill holes for fences for screws. It drilled in great, but every once in a while when reversing the drill out, the adapter would come off. A bit annoying

Hi any one help me I have a 3/8 impact gun how can I use bits? I can’t get any where the 3/8 adaptor please

would you use the impact wrench adapter with an air impact wrench?

First time watching yr video,me subscribe 😀

Yes! The adapter is cool. But don't make it a habit. Otherwise too much torque can shred the screws. Nice tho if you're in a pinch

Does Dewalt has a 3/8 to 1/4 hex adapter? I know milwaukee has it, but I can not find one from Dewalt

Dewalt accessories on a red Milwaukee :)

The next thing to do is review using a 3/8 th keyless chuck adapter on an impact driver

This would be one of those things that I would buy and then two months down the line I would forget that I had it. If I needed to use an impact driver, I would probably reach for the driver rather than the adapter. I try and avoid adapters at all cost. Just my own personal preference.

I love gripe rite screws

12$ is a good price for this adapter, considering you can buy a new bare impact drill for like 60$.

can you do a review on the new dewalt Bluetooth batteries with the app?

And you could always use a quarter inch impact socket instead

Would this adapter be great on IR W7150?

Time for a comparison between gen 2 fuel 1/2 compact impact and the Makita xwt02z.

it's gonna have more power more practical all time use.

WOOT WOOT ONLY LOVED COMMENT HAHA. Have you done the ridgid gen 5 brushless impact wrench???

I would get the impact driver and socket adapters

Dewalt: makes this Him: puts it on a milwaukee

I have a Milwaukee version from 3/8" square drive to 1/4" he adapter and my bits get stick constatlyy..

: I purchase one. It appeared to be a little dry. Would you suggest some type of lightweight lubricant? 🐢 ⚒️ 🐢 👍

if you are using small 1 inch bit and this 12v wrench (the link below) it will be even shorter and more accurate then regular impact driver. The regular impact driver's socket is deep and cannot use 1 inch PH2 bits for example. sydneytools.com.au/product/milwaukee-m12fiwf12-0-12v-li-ion-cordless-fuel-stubby-1-2-impact-wrench-skin-only

The short bits do not work here. You don’t mention that.

Deadpool voice

a

Or if you're broke, use a used drill for everything. And a 120v walmart impact wrench for anything lower than the engine block lol

Fortunately, I bought a Bosch impact that is a 1/2" drive with 1/4" hex built in. No adapter needed.

2000 in-lbs = 226Nm

Wobbling is the deal breaker on the adapter!

$7.00 sign me up

is it bad that i'm an mek a nik and i have a impact driver, a 1/2 inch cordless impact, and a cordless screw gun? haha