DEWALT DWE7492 Table Saw Unboxing and Review

No video

DEWALT DWE7492 Table Saw Unboxing and Review

Рет қаралды 140,660

4 жыл бұрын

Unboxing and Review of DEWALT DWE7492 Table Saw.
The DWE7492 has a 2000W brushed motor for high performance in all applications. With a Max. Ripping Capacity [right] 825mm and Max. Ripping Capacity [left] 558 mm. max. depth of cut at 90º 77mm and max. depth of cut at 45º 55mm. With 26.6 kg unit weight and optimised footprint make this the most portable saw in its class. Steel roll cage protects saw against jobsite drops and
mpacts. Rack and pinion fence system, front and rear fence lock and large, clear scales combine to give an extremely accurate and easy to use saw. Fence system provides 825mm of rip capacity in a portable design for cutting large sheet materials to size. Split design clear saw guard for improved visibility. Airlock compatible dust extraction connection. Cast table top design ensures accuracy and precision, table Size 556x669mm. Overload protection system ensures powerful performance in hard, wet or frozen woods. Quick bevel lock with large scale for easy, accurate adjustments. ON/OFF switch comes with a bump-pad for quick shut-off. Can also immobilize the ON/OFF switch with a padlock. Blade Diameter 250 mm, Blade Bore 30 mm and Blade Speed 4800 rpm. It is supplied with: 24 tooth SERIES 30® saw blade, Mitre fence, 2 blade spanners, Parallel fence, Dust port reducer, Push stick.
More info here: productos.dewa...
or here: www.dewalt.com...
More DEWALT Power Tools reviews:
- DEWALT DWP611PK Router Combo: • DEWALT Router Combo DW...
- DEWALT DCG414T2 Flexvolt Angle Grinder: • DEWALT DCG414T2 Angle ...
- DEWALT DCF887 Brushless Impact Driver: • DEWALT DCF887 Brushles...
- DEWALT DWE6423 Random Orbit Sander: • DEWALT DWE6423 Random ...
My main KZfaq channel: / woodworkingbarcelona
Support me on patreon: / wwb
Follow me on my social media:
/ woodworkingbarcelona
/ woodworkingbarcelona

Пікірлер: 250

@DJAguitars Жыл бұрын

Brilliant video... no drinking coffee, no vlog on the way to the shop to collect the saw, no dog playing with the packaging. Perfect 👌

@andyjame1971 Жыл бұрын

You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzfaq.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

@TheAwesomeLegacy 4 жыл бұрын

This is just about the best review I've seen, got all the information I wanted without talk (that can sometimes be biased) or unneccesary background music.

@woodworkingbarcelonaii9413 4 жыл бұрын

Thank you very much! I appreciate that.

@fmcclellanjr 3 жыл бұрын

Amen!

@richardduncan8343 3 жыл бұрын

Agree completely, the accuracy tests at the end of the vid definitely worth sticking around for if precision is an important factor in your decision making process

@misteralcide 3 жыл бұрын

I just received my DWE7492 today, how lucky to see your video ! The VERY VERY best video on "how to start with DEWALT DWE7492 Table Saw" by far ! It's rare to see videos on this subject so beautiful and intelligently made. Thank you so much !

@inayat21189 3 жыл бұрын

This is easily the best review of a DeWalt table saw in my opinion. Kudos and thanks so much for making this so clear, clean, smooth and to the effin point. No talk, no bullshit, just the machine and its working!! love it brother!

@pironi2405 Жыл бұрын

True

@ronniekotler9265 4 жыл бұрын

After having this saw for a few months I am absolutely satisfied with it. For the price point it can’t be any better!

@woodworkingbarcelonaii9413 4 жыл бұрын

Overall it's unbeatable on its price range.

@dekaOsiris 4 жыл бұрын

This review has sold the Dewalt for me. Thanks for the time and effort it would have taken to do this, very much appreciated!

@WillfredJM 4 жыл бұрын

After watching this vid. I ordered me one. Just got it today. Same experience. Unbelievable perfect accuracy out of the box. Sooo happy I spent a bit extra for this solid tool.

@woodworkingbarcelonaii9413 4 жыл бұрын

I'm glad it helped you to make your choice and also that your experience with the tool is nearly the same as mine. Good luck and happy woodworking!

@rihis007 4 жыл бұрын

Thanks for vid;)tomorrow i will get mine;)

@woodworkingbarcelonaii9413 4 жыл бұрын

I'm glad to hard that too Janis!

@CaseySexton 4 жыл бұрын

How the hell did I get more information from this video than I do with videos with people who won't shut up about the features lol. Quality over quantity! Awesome stuff.

@woodworkingbarcelonaii9413 4 жыл бұрын

Haha, I appreciate that. I hate blablabla reviews. The tools explain itself.

@alexwolf8019 2 жыл бұрын

Not a word said, but I understood everything covered. Thank You! Just so everyone knows, you will probably have to calibrate this saw after shipping.

@mikew151Manhattan 4 жыл бұрын

such an effective review without words.., i've now seen enough to go and buy my own, thanks for that mate!!

@woodworkingbarcelonaii9413 4 жыл бұрын

Thank you Mike. I'm glad my review "style" liked you. This is a very good tablesaw, the best of the three I've owned so far. Regards!

@robmcmahon6782 4 жыл бұрын

Same! I think I'm gonna upgrade to this. I've had a cheap Titan table saw for a few years, worked great but through my own fault I may have ruined it. Great review👍🏻

@WoodworkingBarcelona 4 жыл бұрын

@@robmcmahon6782 Thank you Rob! It's better that you've learned how to use a cheap table saw before jump to a better one. ;)

@craighatch3221 4 жыл бұрын

Best table saw I’ve ever owned and I’ve been through a lot.

@woodworkingbarcelonaii9413 4 жыл бұрын

Agreed

@JayOfBurn 2 жыл бұрын

I've been researching new saws, and this just sold me on the DeWalt.

@Nuno.Soares.GeoTagXplorer 4 жыл бұрын

My friend! You're review of this table saw was superb! I have made a decision and you sure helped allot. Thanks for sharing. Greetings from Portugal.

@woodworkingbarcelonaii9413 4 жыл бұрын

I'm glad it helped you on your choice. Good luck!

@marcopollo1392 4 жыл бұрын

One of the bests reviews , with all miter and rip cuts👍 good job 😎

@woodworkingbarcelonaii9413 4 жыл бұрын

Thank you mate! I'm glad you found it interesting. Regards!

@tribsat100 4 жыл бұрын

Thankyou for taking the time to do this review so thoroughly 👍

@woodworkingbarcelonaii9413 4 жыл бұрын

I'm glad it was useful for you. Expect more reviews soon.

@KissKume 3 жыл бұрын

I have been using and loving it for a year and a half!

@virgiauskas 2 жыл бұрын

Not a single word said, but more informative than most of similar "review" videos. Good job!

@marcopollo1392 4 жыл бұрын

Best review i've ever seen about this saw . Good job 👍

@woodworkingbarcelonaii9413 4 жыл бұрын

Thank you!

@keto4life197 3 жыл бұрын

I have not regret one second that i bought this and thrown much of the tools out i bought the first year.

@paulpesciatini8440 4 жыл бұрын

Awesome review!!! It convinced me which saw to get. I compared with Makita and Bosch blue..Now I go with the Dewalt. Thank´s for your effort It helped me alot!

@woodworkingbarcelonaii9413 3 жыл бұрын

Thank you. My pleasure!

@moelmakrani7116 3 жыл бұрын

Very nice review, I like how you payed attention to the fence precision...

@woodworkingbarcelonaii9413 3 жыл бұрын

Much appreciated

@jelleelly 2 жыл бұрын

Appreciate this. So glad I didn’t consider the new-fangled cordless variety, where the blade speed drops on contact. I love my 7492.

@davidstanden480 4 жыл бұрын

The accuracy out of the box looks very impressive.

@woodworkingbarcelonaii9413 4 жыл бұрын

Yes indeed. By far this is the best tablesaw I've ever own. Before that I've owned 2 other and this is way more accurate and easy to adjust. I need to stard making sleds for it. Will show in other video. Regards.

@zigis900 4 жыл бұрын

lucky WB II ! i had to adjust a lot (or was expected too much :)) : - table top slots paralell to blade, fence to blade, some free side movement of blade. Everything is easy to adjust. But that lucky feeling is not so high more :)

@Test-bi5rg Жыл бұрын

Much better than the assembly instruction on the manual. DeWalt always makes the manual hard to read. (Like diagrams separate from the texts.)

@MichaelUt 3 жыл бұрын

Awesome video, everything i wanted to know

@woodworkingbarcelonaii9413 3 жыл бұрын

I'm glad to hear that

@buddymac1392 2 жыл бұрын

SWEET! I gotta have one! Thanks!

@NIK516 4 жыл бұрын

Keep it up this is amazing , great camera work as well.

@woodworkingbarcelonaii9413 4 жыл бұрын

Thank you nik!

@tonytbone5826 4 жыл бұрын

Excellent Review Awesome detail to accuracy Well done

@woodworkingbarcelonaii9413 4 жыл бұрын

Thank you Tony

@mulisakbulisak6099 3 жыл бұрын

Thank you for the video, i was looking for how to change the guard👍

@maxscull8816 4 жыл бұрын

Can anyone please confirm or not that the DWE7492 arbour is long enough to take a dado ? Dewalt won’t answer as they do not recommend using dados. I also asked DeWalt if the dwe74911 rolling stand is compatible with the DWE7492 - they said no but I’ve since found out that you only have to drill one hole in the stand to a-line the forth hole.

@woodworkingbarcelonaii9413 4 жыл бұрын

Sorry, I cannot bring you an answer to that question. Regards.

@rihis007 4 жыл бұрын

Here on youtube i found one video ussing dado but on dwe7491 but i think there is no difference from dwe7491-dwe7492...if i find that video i will paste link here

@woodworkingbarcelonaii9413 4 жыл бұрын

I'll appreciate too if you share that video link. Regards!

@spy2778 4 жыл бұрын

Dewalt Europe has no mention of Dado's. However the Dewalt US site says that 13/16" Dado's can be used on the 7491 & 7492. I guess it's a matter of safety regulations between the countries?

@krill80cri 4 жыл бұрын

I’m interested in the dwe74911 stand for the dwe7492 myself. Is its incompatibility ascertained? And if that’s the case, will just drilling a single hole in the stand allow for the table saw to be mounted firmly and safely?

@afmaa7676 3 жыл бұрын

Thanks pro

@Oracloid 4 жыл бұрын

Сегодня тоже приобрел себе такую. Пока еще не распаковывал, стоит в коробке.

@woodworkingbarcelonaii9413 4 жыл бұрын

Вам наверняка понравится!

@tomfull6637 2 жыл бұрын

Thx for a concise presentation!

@pepeibz21 2 жыл бұрын

Muy buen video. Estoy por comprarme esta sierra, ¿ sabes si se pueden usar hojas de sierra tipo DADO? Y gracias!

@TrevorDennis100 4 жыл бұрын

I am wondering about that test of the mitre gauge. A number of people are commenting on how loosely it fits the t-slot, so it surely wouldn't have achieved that beautifully square cut unless something was done to combat that loose fit. Even if it was a just a matter of pushing the runner hard up against one side of the T-slot, it would have only been fair to show that.

@woodworkingbarcelonaii9413 4 жыл бұрын

Just a one minute small tweak to solve that, putting some masking tape on the runner. It works like a charm.

@ionescurazvan913 4 ай бұрын

can I still use the blade guard when I'm cutting at a 45 degrees angle?

@jackhadji2263 4 жыл бұрын

Hi man I am from Barcelona as well, I have this saw about 1 year. For hobby is the best table saw. I was searching information 1 year before until buy, comparing 7491 and 7492 the main difference is that the table of 7492 is more flatness of than 7491. For this reason they built the new one 7492, But this critical information is really hard to find sow I share in this comment to help you're friends. Best Regards Jack

@scottmartin7717 4 жыл бұрын

@Jack hadji Can you elaborate or give a source on the flatness claim? I ask because I own the 7491 and can't find a damn explaining the difference. Thanks in advance bud

@harleyhawk7959 3 жыл бұрын

I have the 7491, I put my straight edge all over the table top its flat with no gapes left to right, front to back. only thing I had to do was adjust the throat plate alittle

@premyslhruby9095 2 жыл бұрын

Hi, I have the same table. 100% satisfied with that only croscutting with original miter gauge is not as per my expectation. Can you please advice how did you solve the miter gauge play? Thank you.

@tomatengarage5608 3 жыл бұрын

Good review. In the beginning it felt strange: no talk, no music...,hm. But now as I have watched the full Clip I feel good. Quite relaxing to have a lot of information without being overloaded by useless talk or awful music. Thumbs up, man!!! Question: Do you have any experience with using INCRA-Miters on this saw? Greetings from Germany. Michael

@woodworkingbarcelonaii9413 3 жыл бұрын

Thanks for your thoughts Michael.

@blahdiblah2169 3 жыл бұрын

My understanding is it looks like this saw is capable of some degree of precision.

@MrAbdulhaq786 4 жыл бұрын

Thank you great video now i am going to buy one

@woodworkingbarcelonaii9413 4 жыл бұрын

Thank you Abdul

@leogarcia3575 3 жыл бұрын

The best review...table saw

@woodworkingbarcelonaii9413 3 жыл бұрын

Thank you Leo!

@florinelr8154 Жыл бұрын

Hello sir, this table saw is better than 7485? Do you recomand this or dwe 7485? Thank yoi 🙏

@saiiiiiii1 3 жыл бұрын

Does the parallel fence need support from below when extended? Can it go below 0° and above 45°? Like -1° or 46°

@woodworkingbarcelonaii9413 3 жыл бұрын

The fence has a moving part that you place as a floating bed when it is extended far from the table. The blade can be adjusted from - 1 to 46 indeed

@hamilton3901 3 жыл бұрын

Hi great video! I got one myself, too. Does the motor on your saw make a bright flash when turning on/off? Mine does and it smelled like burned plastic the first time I started it, not sure wether that is supposed to happen... I see the light through the ventilation holes in the motor. Thank you!

@woodworkingbarcelonaii9413 3 жыл бұрын

That's because of the brushed motor. It's normal to happen.

@Aryakumawat2121 2 жыл бұрын

Sir/Mem es mashin se Grenite bhi cutting kiya ja sakta h kya? Pls.reply 🙏🙏

@stevenwaibel6856 4 жыл бұрын

Good job! Nice video, very well done!

@woodworkingbarcelonaii9413 4 жыл бұрын

Thanks Steven!

@mr.9workshop492 2 жыл бұрын

Soo, the miter gage on this model is not useless like the one in the DW745 ?

@simonetofani6357 4 жыл бұрын

Excellent review thanks. What’s your opinion about te lack of a Soft Start? Somebody think it’s a usefull feature for delay trasmisdion parts wear, others boesn’t bother.

@woodworkingbarcelonaii9413 4 жыл бұрын

I would appreciate it but the lack of it does not bother me.

@gerhardzimmer1237 4 жыл бұрын

Thanks for this great video. Does this saw have standard t-slots for i.e. a incra miter gauge? or are the slots Dewalt only?

@woodworkingbarcelonaii9413 4 жыл бұрын

I guess they're standard but i would check on the manual.

@adrianburghelea9353 3 жыл бұрын

Hi Mr Zimmer ! You was in visit in Romania ?

@kamhaq 3 жыл бұрын

My junk Makita MLT100 has to go into trash, this is looking very promising. Thanks for review

@giuseppecastaldo644 3 жыл бұрын

good morning. i'd like your advice, between the table saw, Triton Bosch Gts11xc and Dewalt 7492, which is better?

@JT_India 3 жыл бұрын

Great video and review. Thanks for not speaking. Your actions speak louder than voice.

@pepeibz21 2 жыл бұрын

Gracias!

@janschatteman3873 4 жыл бұрын

Great review! I'm still looking around and doubting between the bosch gts 10 xc and this one. Main difference seems to be better dewalt appreciation on fence and accuracy out of the box, but then, currently it's also quite a bit pricier than the Bosch ... I'm also from BCN, so I was wondering if you could perhaps recommend a good tool buying site, and also this being Europe, buying decent wood if you're not a professional is a bit of an (expensive) adventure. An recommendations there? Thanks!

@woodworkingbarcelonaii9413 4 жыл бұрын

Both tablesaws are great. Choose the one fits better your expectations. I would buy it online as most of my tools. In BCN capital I bought wood on a local supplier when I lived there. But I don't know if they still open. It's call Fustes Garriga. They are a bit on the expensive side but they have species I would never see on other suppliers.

@MoFo_London 4 жыл бұрын

I’ve been looking at the same 2 models as you. I very nearly went for the Bosch but found one too many forums with owners complaining about the same things. Too much play in the mitre track seems to be a common complaint, also fence not parallel to blade for some. WTF?!! A £600+ pro saw that has accuracy issues! I’ve seen enough, going with the DWE 7492

@Presbiter 4 жыл бұрын

@@MoFo_London there are 3rd party tools that get rid of all the problems the bosch has. Getting rid of play of the mitre track for good fe will cost you 8 eur, the fence has to be calibrated if the saw had a rough transport...but thats something many users arent able to figure out or just never read the manual. The Dewalt has similar problems fe with play of the mitre track...and there are no 3rd party tools to get rid of that yet^^

@jackwebb2425 3 жыл бұрын

Excellent review on the DWE7492. This model is not available near me nor is it even listed on DeWalts website. I really can't even tell what the latest Dewalt table saw is quite frankly. There is a DeWalt DWE7492RS & a DeWalt DWE7491RS listed on random websites but you can't find, buy or discern the exact differences. Any help from the informed community would be much appreciated. Thanks...and great review once again. LOL just don't know where to buy it!

@doisneau 3 жыл бұрын

Do you know the differences with the DWE7485, other than the rip capacity and motor power? It’s a bit hard to buy this saw over here; easier to get a hold of the cheaper version. Do you think I’ll lose some important features? Thanks for the video! Very helpful :)

@woodworkingbarcelonaii9413 3 жыл бұрын

Hi! I think that question was solved in earlier comment. I recommend to search it. But overall I think there are small changes. Regards.

@user-ih4hc3gh6j 4 жыл бұрын

Good job. Thank you. 👍👍👍

@woodworkingbarcelonaii9413 3 жыл бұрын

Thanks

@lesliekho8970 10 ай бұрын

Can it use dado saw blades??

@massimocalisti1416 4 жыл бұрын

hello I have the 7492 but on the institutions I have not found anything to put 90? I put the digital protractor cmt on the counter top I reset and then I put it on the side guide and it gives me 89.4😡😁 how do you put it at 90 °? Thanks

@woodworkingbarcelonaii9413 4 жыл бұрын

You can tweak adding really thin shims like paper.

@whoDatBeDare 3 жыл бұрын

Well done. Thanks heaps.

@woodworkingbarcelonaii9413 3 жыл бұрын

Thanks! I'm glad you like it. Please remember to thumbs up and subscribe to support my work. Regards!

@BarrySumpter 3 жыл бұрын

@@woodworkingbarcelonaii9413 Thanks for the reminder. Have done.

@woodworkingbarcelonaii9413 3 жыл бұрын

Much appreciated!

@jinkswheeler 4 жыл бұрын

This is strangely ASMR-ish I must say. Great video, thanks!

@roselucas2760 4 жыл бұрын

What does that even mean? ASMR? Is that an acronym?

@woodworkingbarcelonaii9413 4 жыл бұрын

Thanks haha, that was not the intention

@woodworkingbarcelonaii9413 4 жыл бұрын

en.wikipedia.org/wiki/ASMR

@anderslysoekleven 4 жыл бұрын

How is the flatness of the table top?

@woodworkingbarcelonaii9413 4 жыл бұрын

I would not say dead flat but flat enough for a fairly precise work. Anyway I believe flatness on a tablesaw is bit overrated. It is more critical, for example, on a jointer. Regards.

@chevyimp5857 4 жыл бұрын

Thanks

@woodworkingbarcelonaii9413 4 жыл бұрын

I'm glad you liked it!

@Pal_Nahal 3 жыл бұрын

Does this model accept a dado stack?

@moelmakrani7116 3 жыл бұрын

I received mine yesterday but it is not as good as yours, the top is a bit warped on the right end and front left side, and has also a bump near the insert on the left side so I can't get the blade perfectly square on both sides. The top is about About 0.2 a 0.3 mm off on these spots. How is the flatness of the top on yours? The fence is not square at all to the top, I don't know if I can align that or not. Being a pro-Dewalt guy this is quite disappointing, I will run some test cuts and see how that goes... And contact Dewalt for their input.

@woodworkingbarcelonaii9413 3 жыл бұрын

If that problem concerns you and it compromises the precision of your cuts you may need to ask for replacement. Mine is not perfect, little wrap and I needed to tweak the fence to get perfect 90deg. But all in all, for its price and for a job site saw you can't ask for more. It's the best of its range.

@moelmakrani7116 3 жыл бұрын

@@woodworkingbarcelonaii9413 Thanks for that suggestion. How did you tweak the fence? I've put some blue tape to raise it a bit where it is sitting on the slide. I've been looking for a better solution by unscrewing the fence and do something that kind but I hesitated because of not screwing it completely :-)

@ChickenDinnerz 4 жыл бұрын

Hi, can you help me? My fence is not parallel to the table top when I butt my square up like you do. Can you tell me how to adjust my fence ?

@woodworkingbarcelonaii9413 4 жыл бұрын

There's a set of screws to adjust parallelism. Check your manual.

@stevereed5776 4 жыл бұрын

Great video, I actually purchased one based on this video. However, I have a question, when you show the alignments using the square, was this right out of the box or did you have to do some adjustments? Mine seems to be all over the place.

@woodworkingbarcelonaii9413 4 жыл бұрын

It depends on every unit. I made little adjustments to leave it dead square.

@stevereed5776 4 жыл бұрын

@@woodworkingbarcelonaii9413 Hi, could you do a video on the adjustments you made? I sent mine back to Dewalt and it has come back exactly the same (actually worse as they have damaged my fence). Any help appreciated. Thanks

@ElAnvaBar 4 жыл бұрын

Tables saws look scary as hell. But i do really want one for woodworking. I'll keep the gaurd on. I'll keep the fear to prevent me from doing stupid things.

@woodworkingbarcelonaii9413 4 жыл бұрын

Of course. It's basic to feel safe during any operation on your workshop.

@lastorianostra8173 3 жыл бұрын

7:45 7:46 the image stops and restart by showing the identical measurement into the display of the first measurement. I'm not criticizing Dewalt quality, quite the opposite. Just a technical detail that came to my eye!

@woodworkingbarcelonaii9413 3 жыл бұрын

I believe my edit cut may confuse you. Also blown out lights don't help. But, if you reference on the wood grain you'll see that both measurements are form the two ends of the board. Besides 0.02mm difference of measurement. Regards.

@lastorianostra8173 3 жыл бұрын

@@woodworkingbarcelonaii9413 exactly!!! You did an amazing job and DW performs as no other job-site table saw! thanks for your answer and for this amazing video!!! Regards from Roma, Italia ♥

@woodworkingbarcelonaii9413 3 жыл бұрын

My pleasure. Regards!

@MrKockabilly 3 жыл бұрын

I heard you cannot use 10" blades in it because its capable only of 250mm (not 254mm) so good luck it you would like to replace the blade with a real 10 inch like Diablo or most other brand.

@woodworkingbarcelonaii9413 3 жыл бұрын

If I'm not wrong I've mounted crosscut blade from my old makita tablesaw and I think the blade was 10". Will confirm that soon. Regards

@Nehbur 4 жыл бұрын

I'm currently very much in doubt whether to buy the Makita 2704N or this Dewalt one. I really like the fact that Makita can cut 16mm deeper than the Dewalt and the Makita has a bigger table. However, I like the fact that Dewalt has a rack and pinion adjustment and its a bit cheaper. Do you think it is a problem that the Dewalt cuts less deep and the table is smaller? Or is that not a disadvantage at all?

@woodworkingbarcelonaii9413 4 жыл бұрын

I would go with dewalt. If you need more cutting capacity you can flip over the wood piece and cut it from the other side. I prefere the accuracy from dewalt. I've owned a Makita tablesaw before (MLT100) and the fence is crap. I modified myself but never was going to work as good as a fence with rack&pinion system. If you need a bigger table you can make a sawstand with more working surface and you solve that problem. Regards

@Nehbur 4 жыл бұрын

@@woodworkingbarcelonaii9413 Thank you. I have the Dewalt now for more than a week. It's a fantastic machine. The fence is very good and I love the rack and pinion as said. Couldn't be happier. I would have liked an extension feature for longer boards, but I will make a big table around it and a big sliding table.

@umbraexsanguis 4 жыл бұрын

can you make rabbet cuts/dados/groves etc with the riving knife installed? I heard the dw745 has a non-retractable riving knife - so you can't do that with that one. thanks for your answer

@woodworkingbarcelonaii9413 4 жыл бұрын

You are able to do so with dwe7492 without any trouble.

@umbraexsanguis 4 жыл бұрын

@@woodworkingbarcelonaii9413 thank you very much! because of your review I bought the saw just 2 days ago. i think the accuracy speak for itself if you compare it to a bosch gts 10 xc or any other portable table saw within that price range. my budget simply wont allow any felder or festool tks 80 ;) thank you for your reply.

@woodworkingbarcelonaii9413 4 жыл бұрын

I'm glad you're happy with your tablesaw. I've enjoyed a lot

@HappyFamilyMakers 4 жыл бұрын

thanks a lot for review .. I have just a more question .. which is the model of your camera ? I loved it

@woodworkingbarcelonaii9413 4 жыл бұрын

Thanks! I film with a Sony A6300 with a Sigma 30mm F1.4

@tomatengarage5608 3 жыл бұрын

Question: Does anyone have experiences with using INCRA-Miters on this saw?

@woodworkingbarcelonaii9413 3 жыл бұрын

I do not. Maybe some other folks can add some light to the question. Regards.

@neco777777 4 жыл бұрын

Firstly thanks for the review. Would it be possible to use 254mmx30mm (bore) blades with this table saw, that are 3,2mm thick? After having ordered the 7492QS version in Germany I noticed the difference in diameter in the specs sheet/manual. I thought that 10'' saws are 254 mm but the specs say 250mm. Seems as if I can't use my older blades :( Many thanks in advance!

@woodworkingbarcelonaii9413 4 жыл бұрын

I tried with 260mm blade and it didn't fit at all. I did not tried with 254mm (10') blade sorry.

@neco777777 4 жыл бұрын

@@woodworkingbarcelonaii9413 Well, will have to wait and see. I'll let you know as soon as it's delivered. Thanks for the reply, much appreciated!

@saiiiiiii1 4 жыл бұрын

@@neco777777 so? 254 fits?

@bgolfy 3 жыл бұрын

Hi, nice review! I’m a new woodworker, I’ve just received mine, I have 2 troubles with my fence: the fence extension is not flat as yours in 3:27 and the fence itself is not vertically square as in 6:03, there s a thin light at the top. There is no mention on how to fix these 2 things in the manual. Does anyone can help me on how to fix this? Many thanks ...

@woodworkingbarcelonaii9413 3 жыл бұрын

I needed for small adjustment in paralel fence but I solve it with paper shims.

@bgolfy 3 жыл бұрын

Woodworking Barcelona II Thanks ... I finally solved it by pressing it carefully from behind. Everything is perfect now !

@woodworkingbarcelonaii9413 3 жыл бұрын

I'm glad you solve it mate 👍👍

@saiiiiiii1 4 жыл бұрын

Do the Incra mitre gauges fit?

@woodworkingbarcelonaii9413 3 жыл бұрын

I cannot assure you that but I think the t slots are common size.

@ravenmooore 3 жыл бұрын

hi! Are the T-slots standard? I can buy aftermarket Miter gauges?

@woodworkingbarcelonaii9413 3 жыл бұрын

I think they are standard

@TheLayla33 4 жыл бұрын

Hello friends, a week ago I bought the DEWALT 7492, can anyone recommend me to DADO SET for this saw

@woodworkingbarcelonaii9413 4 жыл бұрын

I can recommend a dado set, I prefere to use router or router table for dadoes.

@TheLayla33 4 жыл бұрын

@@woodworkingbarcelonaii9413 Thanks'

@jonathangaliano2617 4 жыл бұрын

What is the difference between this and the DWE7491 ??

@woodworkingbarcelonaii9413 4 жыл бұрын

As far as I've searched they are are nearly the same table saw. If someone can bring more details about the differences about those two, we'll be glad to hear from you.

@spy2778 4 жыл бұрын

According to the UK sales team, the difference is mainly cosmetic. The 7492 is slightly smaller in dimensions, & is 2kg lighter. Higher blade RPM on the 7492. I still wonder why the price for the 7491 is so much higher!?

@woodworkingbarcelonaii9413 4 жыл бұрын

Thanks for your comment. Interesting info.

@Hapotecario 4 жыл бұрын

7491 does not appear in 2020 dewalt product catalog. I compared the specs on both manuals. there are a number of differences. Output power, size, weight. Noise. I do not know why 7491 is about 200 euros more expensive because in all these aspects the 7492 has better specs. It is very likely i am buying the new 7492.

@SzymonMalanski 4 жыл бұрын

@@Hapotecario I noticed exactly the same thing here in Poland - the older 7491 is significantly more expensive. The 7491 is marked as discontinued and it is harder to find it in stores, so maybe the price is a consequence of higher demand/supply ratio? People often buy what is already popular and tested by others - you can find multiple forum threads discussing the 7491 but almost none about the 7492. I guess many woodworkers out there are trying to get their hands on the 7491 while they still can.

@MrDuessay 3 жыл бұрын

Hola. Tengo esta misma sierra y cada vez que la apago las escobillas del motor pegan un fogonazo. Mientras funciona también sale alguna chispa. A alguien más le sucede? En otra review vi que también le ocurría. Saludos!

@woodworkingbarcelonaii9413 3 жыл бұрын

En el apagado me ocurre y es algo normal en los motores con escobillas. Nada de qué preocuparse. Un saludo

@MrDuessay 3 жыл бұрын

@@woodworkingbarcelonaii9413 Gracias por contestar, te acabas de ganar un suscriptor por tu cortesía! Saludos y felices fiestas!

@jvmusicph 3 жыл бұрын

why should i choose this over bosh gts 10 j?

@woodworkingbarcelonaii9413 3 жыл бұрын

The competitor of Dwe7492 is the GTS XC 10, not the 10 J which is on a lower rate.

@drs-Rigo-Reus 4 жыл бұрын

this is the heaviest table saw by dewalt no? The dwe7485 is its smaller brother?

@woodworkingbarcelonaii9413 4 жыл бұрын

I think this is the top one.

@manubushcraftbushsend4439 3 жыл бұрын

hola buenas tardes,acabo de comprar este mismo modelo de sierra,una pregunta ati te pasa lo mismo que a la mia que hace mucho ruido?gracias un saludo

@woodworkingbarcelonaii9413 3 жыл бұрын

Buenas, es tan ruidosa como otras sierra de mesa de motor con escobillas. Un saludo!

@manubushcraftbushsend4439 3 жыл бұрын

@@woodworkingbarcelonaii9413 EL CASO es que la compre modelo qs pero en la caja solo ponia 8492,nada de qs ,no he encontrado diferencia en internet,pero pense que qs significaba menor sonido,ok gracias un saludo

@woodworkingbarcelonaii9413 3 жыл бұрын

Para nada. El ruido es el mismo.

@edmilsonfilhocontrucaocivi4078 Жыл бұрын

Essa é uma senhorita máquina de serra muito boa mesmo ela promete os

@joelmachado3692 2 жыл бұрын

parabéns, muito bom o unboxing

@laychester4360 4 жыл бұрын

Have anybody noticed how flat that table really is? On my dwe 7485, its like a small bumb on the middlenof table. When placing long ruler it rocks on table no matter which way you put it. About 1mm gap each side. Really annoying, probably gonna send it back

@woodworkingbarcelonaii9413 4 жыл бұрын

Of course, it's not dead flat because it's not a solid steel top. I would say flat enough to work precisely for my needs. I have owned three tablesaws and this is way better that the other.

@jedrickenriquez8977 3 жыл бұрын

Is this soft start motor?

@woodworkingbarcelonaii9413 3 жыл бұрын

Nope

@harleyhawk7959 3 жыл бұрын

I just purchased the 7491, I'm guessing its similar to this one.

@woodworkingbarcelonaii9413 3 жыл бұрын

Yes indeed.

@JamesCheloCordova2 3 жыл бұрын

7491 110v. 7492. 220v

@killboy010 3 жыл бұрын

I'm thinking of uying that chainsaw. Are you satisfied? Do you know any other better to suggest. Thanks.

@woodworkingbarcelonaii9413 3 жыл бұрын

That's a table saw, not a chain saw. I recommend it for sure.

@killboy010 3 жыл бұрын

@@woodworkingbarcelonaii9413 sorry my mistake. I just purchase it and i m waiting for the delivery. Thank you very much.

@Presbiter 4 жыл бұрын

Only thing I really hate about my dewalt is the play of the miter track...I mean the upgraded from plastic to metal...isnt it to much to ask for a good fitting of the track without wobbeling? I really dont get it, why they produce it without the correct measurement. Wouldnt cost them a simple dime more to produce it correctly. Everything else is satisfying

@woodworkingbarcelonaii9413 4 жыл бұрын

Just add one layer of blue tape to eliminate the excessive play on the track. It works like charm.

@Presbiter 4 жыл бұрын

@@woodworkingbarcelonaii9413 thanks I will try it. One thing I can recommend for tuning the maschine is to built a softstart into it. You can get it fe as spare part from bosch for around 20 eur. its easy to built in, there a quite a few vids on how to put one into a table saw on yt. Thats how I eliminated the other big negativ that the saw has out of the box.

@BarrySumpter 3 жыл бұрын

@@Presbiter I've added a soft start from the electronics shop.

@ronniekotler9265 4 жыл бұрын

Just order this saw

@woodworkingbarcelonaii9413 4 жыл бұрын

Sweet

@mrsmith5320 4 жыл бұрын

From where?? I can't seem to find it online

@WoodworkingBarcelona 4 жыл бұрын

Where are you from?

@ronniekotler9265 4 жыл бұрын

Marcus Smith , sorry I just saw you comment. I ordered it on Amazon. I don’t get excited about tools but for the money this saw is great!

@jonnyk9392 4 жыл бұрын

What price are you getting?

@MixingGBP 4 жыл бұрын

What brand is that 90 degree gage?

@gunterwijnants8174 4 жыл бұрын

Thanks for the great review, this answered a lot of my questions! I'm looking for a table saw to do woodworking projects and I am hesitating between the Dewalt DWE7492 or the Bosch GTS 10 XC. I would really appreciate you opinion. Thanks in advance!

@woodworkingbarcelonaii9413 4 жыл бұрын

Sincerely, I couldn't say because I didn't tested the Bosch GTS 10 XC. I believe those are rivals from the same segment of prices.

@gunterwijnants8174 4 жыл бұрын

@@woodworkingbarcelonaii9413 Thanks for the reply, much appreciated!

@ondrejkolbl 3 жыл бұрын

Hi, does your saw has perfect flat fence from buttom to top? I just get one and I am disappointed because of it is not perfectly flat. . Also squarness of fence vs table is not what I would expect . 🤔 Would be possible to send me a photo of your fence flatness? Thanks mate.

@woodworkingbarcelonaii9413 3 жыл бұрын

That's a jobsite saw, so you can expect some irregularities due sheet (not casting) top. I can live with that.

@ondrejkolbl 3 жыл бұрын

@@woodworkingbarcelonaii9413 Hi. Thanks for replay. Yes i understand thats job saw but on your video your fence is perfect. If you would see mine you would agree. 😄 Any way, i get 2nd one with same problem so i again returned back. . Than Dewalt support here in Czech give me message that there was problem in production during short period. So i will se if 3rd one will be better.

@woodworkingbarcelonaii9413 3 жыл бұрын

@@ondrejkolbl I hope the 3rd one will be all right ;)