How to Setup a DeWalt Table Saw

Рет қаралды 101,817

Күн бұрын

In this video I’m going to show you how to setup a DeWalt table saw along with recommended upgrades. This is model DWE7491RS, however it will cover others as well.
Upgrades:
Precision Miter Gauge: amzn.to/3HqU52A
Diablo blade: amzn.to/3Hr0GKa
Digital Angle Finder: amzn.to/3NrINPo
Table Saw Pushblock: amzn.to/49nIg8j
Taper Straight Line Jig: amzn.to/4bCbwuH
Feather Board: amzn.to/3PvG4Vn
Push Stick: amzn.to/3IPlBXQ
Allen Wrenchs: amzn.to/4ak2KjT
Table Saw: amzn.to/3L4Hcwh
Speed Square: amzn.to/44gg8mb
Adjustable Square: amzn.to/3Vman2E
*DISCLAIMER: The above links are Amazon affiliate links. This costs you absolutely nothing, but pays me a small commission and helps me continue to create this FREE content.

Пікірлер: 319

@inspiringbuilds 9 ай бұрын

Recommended Upgrades: Precision Miter Gauge: amzn.to/3HqU52A Diablo blade: amzn.to/3Hr0GKa Digital Angle Finder: amzn.to/3NrINPo Table Saw Pushblock: amzn.to/49nIg8j Taper Straight Line Jig: amzn.to/4bCbwuH Feather Board: amzn.to/3PvG4Vn Push Stick: amzn.to/3IPlBXQ $120 OFF & Free S&H on the table saw: amzn.to/3L4Hcwh Allen Wrenchs: amzn.to/4ak2KjT Speed Square: amzn.to/44gg8mb Adjustable Square: amzn.to/3Vman2E

@In_Libris_Libertas 6 ай бұрын

I bought one of these saws and I think your video is far superior to the owners manual. You leave nothing out and explain everything so nicely. I am so glad I came across your video and I want to say great job and thank you very much! Dewalt should be sponsoring you.

@inspiringbuilds 6 ай бұрын

Thank you, I appreciate the comment and welcome to the channel. Congrats on the new saw as well. Don’t forget to check out some recommended upgrades if you haven’t already (links are in the description if needed). I just released this video that is a nice jig for our table saw and will make additional jig videos soon. 👍 Table Saw Taper Straight Line Jig kzfaq.info/get/bejne/brmTktWfy5mtaZc.html

@oh.ok_woodwork 5 ай бұрын

Seriously +1, and thanks!! The owner's manual explains nothing 😢 I'm noticing some differences with my one (UK), the blocker of which is that the mitre gauge slot is obstructed by a screw. It looks like it can be moved but I have to find a tiny screwdriver to undo it first 🕵️

@miketony2069 Ай бұрын

Your tutorial was pure gold. I have this saw and my cuts have been off and it’s due to not properly calibrating. You spent a great deal of time on the production quality and clarity and it’s very much appreciated. A new subscriber.

@inspiringbuilds Ай бұрын

Thank you Mike, welcome to the family! I appreciate you watching and the feedback. I put together a playlist that you may find helpful too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@dini1046 3 күн бұрын

This is thorough, You should be on Dewalts payroll. I apreciate this video as i had to do all this without the manual. I had trouble with those bolts on the back that pivot the saw. I subbed to your channel, Thank you.💪💪👍👍

@inspiringbuilds Күн бұрын

Thank you, welcome to the family! I appreciate you watching and the feedback. I put together a playlist that you may find helpful too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@eliporter3980 28 күн бұрын

I just bought my first saw and this series was extremely helpful. You helped me put it together way faster than the manual would and you explained all of the features of the saw. Thanks for making these videos.

@inspiringbuilds 28 күн бұрын

Congrats Eli and thanks for the comment, it makes it all worth the effort! Did you by chance happen to check out the jigs? The crosscut sled is something I use almost daily. 👍

@eliporter3980 27 күн бұрын

@@inspiringbuilds it's on my list of things to make. I'm first going to start with making some shaker cabinet doors for my bathroom vanity. If I can survive that project, the crosscut sled is next.

@inspiringbuilds 27 күн бұрын

@@eliporter3980 You got this! Have a great day.

@a9ball1 3 ай бұрын

Just wanted to say that I think you are the first one to show how to adjust the riving knife. Also really liked the shot of taking the cover off to make it easier to get to.

@inspiringbuilds 3 ай бұрын

Great to hear, I’d be happy to have you as a subscriber. I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@_SYDNA_ 8 ай бұрын

Thanks. You've reduced a task that could have been intimidating into something that is clear, straight forward and doable.

@inspiringbuilds 8 ай бұрын

Thank you, I appreciate the feedback! Congrats on your new saw. I will be releasing new videos for this table saw/helpful jigs soon!

@inspiringbuilds 8 ай бұрын

Also, if you didn't get a chance to watch all the way through I recommend these upgrades for the saw: Precision Miter Guage: amzn.to/3HqU52A Diablo blade: amzn.to/3Hr0GKa Digital Angle Finder: amzn.to/3NrINPo

@TonyFromarty 9 ай бұрын

Just bought one of these here in New Zealand. Your video has saved me so much time in setup and looking for accessories, thanks! Subscribed.

@inspiringbuilds 9 ай бұрын

Congrats on the new saw Tony. Thanks for your feedback and welcome to the channel.

@SirAbacusFinch Жыл бұрын

100% beginner here and I have this saw coming in the mail tomorrow. What a lucky day, I can't wait to watch this video!

@inspiringbuilds Жыл бұрын

That's exciting! I put together this assembly video first. I would watch this one and then the setup video. Here is the link: kzfaq.info/get/bejne/d7SAgNqnudvYZX0.html

@inspiringbuilds 8 ай бұрын

Did the video help? How are you liking your new table saw?

@Zuddybuddy 8 ай бұрын

I just got my saw - EVERYTHING was way-off - your video was so much easier than going off the manual!!! 👍😊

@inspiringbuilds 8 ай бұрын

Thanks for the comment and I’m glad you were able to get everything setup correctly. Congrats on the new saw. I will be creating more table saw videos soon. 👍

@2inchesoffun172 9 ай бұрын

I hate to get comments off 69 replies but here i am, number 70. This video helped me adjust my fence and check my saw for the first time since i set it up. I was too excited the first day i got it. Thank you so much for such a thorough walk-through.

@inspiringbuilds 9 ай бұрын

Thank you, I really appreciate the comment and welcome to the channel. I’m glad it helped and don’t hesitate if you have any questions. 👍

@miketolson2915 8 ай бұрын

Man…. Couldn’t have asked for a better video. You nailed this perfectly. My saw works perfect now. Thank you.

@inspiringbuilds 8 ай бұрын

Thank you Mike, I appreciate it! I’m glad I could help and your saw is perfect. I will be creating additional content soon for this table saw. 👍

@emanon321 14 күн бұрын

Well done sir.your clear presentation is excellent and very helpful.

@inspiringbuilds 14 күн бұрын

Thank you so much. You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist that you may find useful too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@christianderweduwen7744 21 күн бұрын

I don’t speak a very good english, but i have understand your explanations. Lot of thanks.

@inspiringbuilds 21 күн бұрын

Thank you Christian. You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist that you may find useful too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@_wamii 2 ай бұрын

god i wish this video existed when i bought this saw. i didn't even know there was a miter guage holder. You're amazing!

@inspiringbuilds 2 ай бұрын

Thank you, glad it helped! I appreciate you watching and the feedback. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@henrylopez7010 29 күн бұрын

Great job really enjoyed and I’m one step closer to purchasing this table saw.

@inspiringbuilds 28 күн бұрын

Thanks Henry, you will be well prepared. What’s holding you back if I may ask? If you want almost 20% off here is a link: amzn.to/3L4Hcwh

@OZheathen 11 ай бұрын

Saved me sooooo much hassle The manual is sub par so this video was a god sent, I’m more of a visual learner. Thank you

@inspiringbuilds 11 ай бұрын

I thought the same of the manual. You’re welcome and thanks so much. Your comment makes all the time it took worth it making the video and is much appreciated.

@trueblue8463 Ай бұрын

Thanks for link to the ‘Fulton Precision Miter Gauge with Aluminum Miter Fence’. Mine arrived today, and it’s an impressive piece of engineering. Once adjusted there is no rocking side to side at all. So much better than the one that comes with the saw. Thanks again👍

@inspiringbuilds Ай бұрын

Great to hear and thanks for the feedback! What project are you working on next?

@trueblue8463 Ай бұрын

@@inspiringbuilds Making a rolling workbench/cabinet for the table saw.

@inspiringbuilds Ай бұрын

@@trueblue8463Awesome, are you thinking with a built in outfeed table? Mobile is the way to go. 👍

@DesiGoatFarmer Ай бұрын

Thnx man. Both your assembly and tuning video helped saved hours. Didn't even look at the manual Was up and running in a couple of hours and made the first cut so quickly You earned a sub from me ♥️ From Canada

@inspiringbuilds Ай бұрын

You’re very welcome, I’m glad it helped and congrats on your new saw. I appreciate you watching and the sub. It’s awesome having you all the way in Canada. I put together a playlist that you may find helpful too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@scotlawrence3231 2 ай бұрын

I used your video today to tune up and calibrate my new DeWalt table saw, and it was extremely helpful and user-friendly. I even switched out the DeWalt blade with the Diablo blade you recommended. I am planning to make your table saw crosscut sled soon. Looking forward to more helpful videos on your channel. Thanks again!

@inspiringbuilds 2 ай бұрын

Awesome to hear Scot and congrats on the new saw, I know it’ll work out great for you. I find myself using the crosscut sled almost daily, definitely a must have in the shop. Have a great day!

@trueblue8463 Ай бұрын

Thank you for providing a very detailed video on how to set the saw correctly. Saved me a great deal of frustration. Definitely subscribing. Thanks for adding the links for the accessories.

@inspiringbuilds Ай бұрын

You’re very welcome, I appreciate you watching and the feedback. Do you happen to have a business? I ask as the True Blue logo is awesome! Thanks for subscribing, I’m looking forward to having you as part of the Inspiring Builds family. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@trueblue8463 Ай бұрын

@@inspiringbuilds Thanks for the playlist. Don’t have a business, just a retired teacher that loves working with wood. I mainly do routed signs and artwork, but now doing more varied projects. Just upgraded my table saw from an old triton work centre I had for 20 years.

@inspiringbuilds Ай бұрын

@@trueblue8463 I bet you’re enjoying the new table saw! A wood worker, previous teacher, and already have the logo seems like a good combo for a KZfaq channel. 👍

@RaisingWolvesBBQ 8 ай бұрын

That was as exciting as hearing that song for the first time when the record came out. Excellent work!

@inspiringbuilds 8 ай бұрын

Thank you, I appreciate you watching. I will have more videos soon for this table saw. 👍

@silver60618 3 ай бұрын

Excellent Video! New to woodworking, and almost sprained my hand trying to turn the fence knob, not realizing it had a lock position 😅But watched the entire thing to familiarize myself with the saw. thanks bunch!

@inspiringbuilds 3 ай бұрын

Thank you and congrats on the new saw! I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@jc-crafford 11 ай бұрын

More thorough than anything else I watched. Thanks.

@inspiringbuilds 11 ай бұрын

Thanks so much for watching and providing the feedback. Welcome to the channel and I hope you find additional videos that are helpful. 👍

@nicolasbusse 2 ай бұрын

Excellent walkthrough. Short and to the point.

@inspiringbuilds 2 ай бұрын

Thank you Nicolas! I appreciate you watching and the feedback. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@NoLumberLeftBehind Ай бұрын

Thank you! Just got my saw yesterday.

@inspiringbuilds Ай бұрын

You’re welcome and congrats on your new saw. I appreciate you watching and the feedback. I put together a playlist that you may find helpful too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@brucefaria6464 3 ай бұрын

Super great job on explaining the set up of the saw.

@inspiringbuilds 3 ай бұрын

Thank you Bruce! I appreciate you watching and the feedback as it means a lot and happy to have you as part of my channel. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@FixItFrench Жыл бұрын

This video is packed full of knowledge! There were several times I thought “will that work on my table saw too?” Great video 👍🏼

@inspiringbuilds Жыл бұрын

Thank you! You’re right a lot of the info will apply to all saws. It’s always good to periodically check as well to ensure it stays in alignment. 👍

@ArthurvanRooij 3 ай бұрын

So I am the umptieth in line to say thank you, but then again you fully deserve it! I just bought a 7492 and this video definitely helped me way better than the manual that came with it, so there: Many thanks!

@inspiringbuilds 3 ай бұрын

Great to hear and congrats on your new table saw. I’d be happy to have you as a subscriber. I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@mr.p9882 3 ай бұрын

Had my saw for a while, but had forgotten some of the tuneup stuff...thanks!! I LOVE my saw!!!

@inspiringbuilds 3 ай бұрын

I appreciate you watching and I agree, it’s an awesome saw. It’s easy to forget as we don’t tune them every day, like the video and you can always come back to it as I like to tune mine yearly at minimal. I also put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@86mielcarek Ай бұрын

Świetny materiał. Faktycznie powinien to być film instruktażowy załączony do urządzenia. Brawo.

@inspiringbuilds Ай бұрын

You’re very welcome, I appreciate you watching and the feedback. Where are you from if I may ask? I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@aldenpines 7 ай бұрын

Excellent video. Just got my saw assembled today and will follow your instructions to calibrate everything. Thanks!

@inspiringbuilds 7 ай бұрын

@CraigHilt Ай бұрын

Nicely done video. Made things quite clear. Thanks

@inspiringbuilds Ай бұрын

You’re welcome and thank you! I appreciate you watching and the feedback. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@smokey1972 9 ай бұрын

I thought I had mine adjusted perfectly. Not quite. Thank you for the best instructions I've seen.

@inspiringbuilds 9 ай бұрын

Awesome, I’m glad it helped! You’re welcome and I appreciate the comment. Hopefully future videos will help as well. I’d like to build a outfeed table and some other extras for this saw.

@bazajow 7 ай бұрын

I can now start thinking of buying one as I feel confident of making any adjustments that will be needed for accurate cutting. Thank you for explaining in very simple terms.

@inspiringbuilds 7 ай бұрын

Thank you for watching and the comment. When you’re ready I have the links to the saw and recommended upgrades. I also have a video to make assembly easy and just released a nice jig to make tapered and angled cuts as well as rip straight lines on rough cut lumber without the need of a jointer.

@ukr4ever 9 ай бұрын

Nice, thank you, exactly the tutorial I was looking for to calibrate my new dewalt table saw, as my fence is 4 mm off on one side LOL

@inspiringbuilds 9 ай бұрын

I’m glad it helped! Mine was off a similar amount. Thanks for watching and your comment. Hopefully future videos help as well. 👍

@edmundnyamupepema 3 ай бұрын

Thank you so much Sir! Your video is far better than the included owner's manual and many other KZfaq videos. It will be my go to reference guide hence forth. Consider me one of your ardent followers. I wish I could like this video 10k times. Once more, THANK YOU SIR!💯/💯

@inspiringbuilds 3 ай бұрын

Thank you Ed! I appreciate you watching and the feedback as it means a lot and happy to have you as part of my channel. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@youngbriks 6 ай бұрын

Just got this saw in the mail today and your video was absolutely perfect. Thank you for your service 🫡

@inspiringbuilds 6 ай бұрын

Thank you, I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@realprojecttools3543 2 ай бұрын

Fantastic video and guide! love it especially the fence part. thank you,

@inspiringbuilds 2 ай бұрын

@glensiu2315 6 ай бұрын

Thank you for the tips and pointers, I look forward to your other videos

@inspiringbuilds 6 ай бұрын

@davidsalas6271 3 ай бұрын

I’m still too scared to use my table saw haha. This video is giving me confidence though, thanks

@inspiringbuilds 3 ай бұрын

You got this, we were all beginners once! I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@nevinleiby 5 ай бұрын

Wow. I’ve been using my saw now for the past few months often on, and I learned so much from this video. Great job!

@inspiringbuilds 5 ай бұрын

Great to hear and thank you, I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@thornelson7201 2 ай бұрын

Very, very good job. I found the adjustment instructions clear and very helpful.

@inspiringbuilds 2 ай бұрын

@justinassirvidas1169 9 ай бұрын

I bought dewalt 7492 table saw and this video will help me to get everything good with adjusting. Thanks in advance!!!🎉

@inspiringbuilds 9 ай бұрын

You’re welcome and congrats on the saw! Thanks for the comment and welcome to the channel. 👍

@r55rhea 5 ай бұрын

Excellent video. I just purchased this saw yesterday, saw your video which made installation very easy. I subscribed to your channel because if your other videos are as well thought out and presented as this one, they will be very useful.

@inspiringbuilds 5 ай бұрын

Thank you and congrats on your new saw! I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@bradmiles129 9 ай бұрын

This video is outstanding! Full of information and delivered with excellent presentation skills.

@inspiringbuilds 9 ай бұрын

Thank you Brad, you’re the man! Videos like this takes a ton of time so your comment means a lot. I’m also still growing my presentation skills and appreciate the feedback. Have a great day!

@kingrico1989 3 ай бұрын

Thank you. Very detailed videos for this saw. You saved me a lot of time and headache.

@inspiringbuilds 3 ай бұрын

@jirdesteva 3 ай бұрын

Great video. I would like to add that the saw I purchased need slightly more work to get the blade parallel to the miter slots. There are four bolts on the underside of the table that allow for the blade to move laterally. I also found that the angle adjustment lever must be unlocked to allow the front of the blade to be adjusted.

@inspiringbuilds 3 ай бұрын

@florinsgondea6124 6 ай бұрын

Bravo ! This is one of the best table sae tutorial. Congratulations.

@inspiringbuilds 6 ай бұрын

@gryshie100 6 ай бұрын

Wow. Well done sir. Very helpfull video ! Greetings from Poland !

@inspiringbuilds 6 ай бұрын

Thank you, I appreciate the comment and welcome to the channel and awesome to have you from Poland! Congrats on the new saw as well. Don’t forget to check out some recommended upgrades if you haven’t already (links are in the description if needed). I just released this video that is a nice jig for our table saw and will make additional jig videos soon. 👍 Table Saw Taper Straight Line Jig kzfaq.info/get/bejne/brmTktWfy5mtaZc.html

@danandrus7190 3 ай бұрын

Wow, I am so glad I discovered your channel. Excellent video, leaves nothing out. When I unboxed my saw and opened the manual I the was in big trouble

@inspiringbuilds 3 ай бұрын

Thank you Dan! I appreciate you watching and the feedback as it means a lot and happy to have you as part of my channel. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@shoefanatic7076 6 ай бұрын

Another great video. All meat and no fillet.

@inspiringbuilds 6 ай бұрын

@thaisfranca5015 Ай бұрын

What a fantastic video!!! I’ve already bought one and I’ll calibrate using your video. Obrigada ☺️

@inspiringbuilds Ай бұрын

Thank you, I appreciate you watching and the feedback. I put together a playlist that you may find helpful too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@angelomanzara6600 2 ай бұрын

Great video and the un-boxing one was good as well. I am buying this saw today and the person at Rona was no help. They couldn't figure out how to move the rip fence. Great video!

@inspiringbuilds 2 ай бұрын

Thanks Angelo, I appreciate it. You won’t regret the new table saw. How much are you getting it for if I may ask?

@angelomanzara6600 2 ай бұрын

@inspiringbuilds $699 Cdn. Reg price is 919.00. I also have a 10 dollar coupon, and I get a 5% contractor discount. Only issue is that my local store doesn't have any, but the next town over has 4.

@inspiringbuilds 2 ай бұрын

@@angelomanzara6600 Great deal! It’s about $50 less total that my option and I just wanted to ensure you were getting a good price on it. 👍

@kathrynnewton8721 22 күн бұрын

Brilliant tutorial!

@inspiringbuilds 21 күн бұрын

Thank you Kathryn, I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist that you may find useful too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@fogm5697 10 ай бұрын

Excellent video sir! Heading to the garage tomorrow with your video to set mine up. Thank you 🙏 Your assembly video of this saw was a life saver too!

@inspiringbuilds 10 ай бұрын

Congrats on your new saw! Glad to have you on the channel and appreciate your feedback. Both videos took quite a bit of time so it’s good to hear they are helpful!

@OverOut Жыл бұрын

awesome walkthrough 👍🏼! never thought to use the square to check that the blade is straight and the painter's tape on the miter gauge for a better fit - great tips! thank you.

@inspiringbuilds Жыл бұрын

Thank you sir, appreciate it!

@PierreRoussin Ай бұрын

Thank you so much, what a fantastic video !

@inspiringbuilds Ай бұрын

Thank you Pierre. You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist that you may find useful too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@walterfigueroa2425 Ай бұрын

Your videos are awesome! Thank you for the advice and information.

@inspiringbuilds Ай бұрын

You’re very welcome, I appreciate you watching and the feedback. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@PaulMarlmountWoodcrafts 7 ай бұрын

Great presentation, I have just acquired a dewalt 7492. I’m glad you clarified the issue of fence not at 90 degrees or perpendicular to saw table. Good advice, leave very well alone. Keep us inspired. Thank you.

@inspiringbuilds 7 ай бұрын

Thanks Paul, I appreciate the comment and welcome to the channel. Congrats on the new saw as well. Don’t forget to check out some recommended upgrades. I’ll have new video out soon for helpful jigs to use on table saws. 👍

@PaulMarlmountWoodcrafts 7 ай бұрын

@@inspiringbuilds Thank you fir response, appreciated, look forward to your upcoming presentations, Regards, Paul

@billymacmakes Жыл бұрын

Nice thorough review! It's been so long since I set up my DeWalt saw, I think I should go back and check some of those angles!

@inspiringbuilds Жыл бұрын

Thank you! I agree as things go out of alignment over time and some may have been missed. I’m looking forward to seeing some more of your builds. 👍

@jamestolfree7607 8 ай бұрын

Excellent video. Very helpful. Thanks for taking the time to make this, it’s saved me a bunch of time 👍

@inspiringbuilds 8 ай бұрын

Thank you James, I appreciate the comment as it makes it worth taking the time to make the video. I will have additional table saw/jig videos coming soon. 👍

@robertgibbs5022 7 ай бұрын

Thank you so much for this video! Best video on this topic out there.

@inspiringbuilds 7 ай бұрын

Thanks Robert, I appreciate the comment and welcome to the channel. Congrats on the new saw as well. Don’t forget to check out some recommended upgrades if you haven’t already. I’ll have a new video out soon for helpful jigs to use on table saws. 👍

@nickpedersen6450 7 ай бұрын

Thank you. Much clearer than the instruction manual.

@inspiringbuilds 7 ай бұрын

Thank you, I appreciate the comment. Congrats on the new saw! I will be releasing new add ons such as helpful jigs videos soon for this table saw. 👍

@inspiringbuilds 7 ай бұрын

@bradleyprentice2359 Жыл бұрын

I followed along with your awesome great video on how to diy to set my table saw. Thank you. Now I have new knowledge that i didn't have before on how to set up and align my new dewalt table saw . I never knew how to set and align any table saw the correct way before until now. 👍

@inspiringbuilds Жыл бұрын

Thank you Bradley, great to hear! Congrats on your new saw. 👍

@paulcooper9187 11 ай бұрын

Thanks, Exactly what I needed, mine has just been delivered here in the UK

@inspiringbuilds 11 ай бұрын

Awesome to hear and congrats on your new saw Paul. It’s cool having subscribers from around the world and your comment makes all the time putting the video together worth it. 👍 Hopefully you get a chance to check out some upgrades too!

@davidpotts3121 10 ай бұрын

Thanks!! I watched a few of these on the DeWalt DWE7491 and this was the best I have seen! Thanks!!

@inspiringbuilds 10 ай бұрын

Wow thank you for the feedback. I appreciate you watching David and welcome to the channel!

@naz8885 7 ай бұрын

This is a great, concise video.

@inspiringbuilds 7 ай бұрын

Thank you, I appreciate the comment. Congrats on the new saw! I will be releasing new add ons such as helpful jigs videos soon for this table saw. 👍

@inspiringbuilds 7 ай бұрын

@lauriepaddles 8 ай бұрын

Great video. Clear and easy to follow

@inspiringbuilds 8 ай бұрын

Thank you for watching and providing feedback, I’m glad it was helpful! I will be creating more table saw videos soon. 👍

@ugonow69 7 ай бұрын

Big thanks for this vid, very helpful! My saw appears to have a third position for the fence on the left side of the blade, as well as the two on the right.

@inspiringbuilds 7 ай бұрын

@gavinmaloney6773 6 ай бұрын

Fantastic video & happy I came across this, as I'm about to set up my DeWalt table saw ;)

@inspiringbuilds 6 ай бұрын

Thank you Gavin, I appreciate the comment and welcome to the channel. Congrats on the new saw as well. Don’t forget to check out some recommended upgrades if you haven’t already (links are in the description if needed). I just released this video that is a nice jig for our table saw and will make additional jig videos soon. 👍 Table Saw Taper Straight Line Jig kzfaq.info/get/bejne/brmTktWfy5mtaZc.html

@antoniovazquez8934 4 ай бұрын

Excellent info, thank you so much!! 👍

@inspiringbuilds 4 ай бұрын

Thank you Antonio, I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@rvscootin3457 9 ай бұрын

Excellent setup video - Thanks!

@inspiringbuilds 9 ай бұрын

Thank you and I appreciate the comment. Hopefully future videos will help as well. I’d like to build a outfeed table and some other extras for this saw. 👍

@aldrindulam 11 ай бұрын

Thanks for some invaluable knowledge...

@inspiringbuilds 11 ай бұрын

Thank you for taking the time to comment and help the algorithm. For people like you or I we may not need the additional knowledge, but it is extremely helpful to others as you can see from the comments below.

@anthonyhenderson7241 9 ай бұрын

Best setup video on the net! Nice work.

@inspiringbuilds 9 ай бұрын

Thanks, I appreciate it!

@MjPersonal 7 ай бұрын

What a great help with setup! Thanks.

@inspiringbuilds 7 ай бұрын

Thank you MJ, I appreciate the comment and welcome to the channel. Congrats on the new saw as well. Don’t forget to check out some recommended upgrades if you haven’t already (links are in the description if needed). I just released this video that is a nice jig for our table saw and will make additional jig videos soon. 👍 Table Saw Taper Straight Line Jig kzfaq.info/get/bejne/brmTktWfy5mtaZc.html

@mgpvii Жыл бұрын

Excellent video. Thank you.

@inspiringbuilds Жыл бұрын

Thanks so much, glad it was helpful and welcome to the channel. Cool Led Zepplin song. 👍

@Bluuuz Ай бұрын

Really good setup guide. Dewalt should give you a job or at least, some free kit.

@inspiringbuilds Ай бұрын

Thank you, I do it for my subscribers and to help inspire others. I’ve never received anything from DeWalt. I appreciate you watching and the feedback. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@leeewsichek7934 Ай бұрын

Dan, thanks for an excellent video on the setup of this saw. Really appreciate the help. Thanks for the stand setup also. Instructions were not very helpful. 1 Thes 5:11

@inspiringbuilds Ай бұрын

You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I appreciate the scripture too, I’m not familiar with that verse, would you mind sharing it? I put together a playlist with a couple of jigs that you may find useful too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@leeewsichek7934 29 күн бұрын

Therefore encourage one another and build each other up, just as in fact you are doing. 1Thes 5:11

@essjay9836 6 ай бұрын

Nice, easy vid to follow that's more in-depth than most ... the only suggestion I have to make it the one stop shop is how to adjust and correctly set the 90/45 mitre angle guide and stop cam and, like pretty much every other set-up video I've watched on this saw, you didn't mention the anti kick back attachment that comes with it (stored underneath behind front cover on right) ... but apart from that I have this vid saved and it's the one I followed in setting mine up 👍

@inspiringbuilds 6 ай бұрын

Thanks for watching and leaving feedback. I did cover both items mentioned at 1:48 and 9:12. I’m glad the video helped with your setup. I put together this playlist that you may find helpful jigs or a sled to expand your projects while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@mrbarton20101 22 күн бұрын

Great video, very helpful. With a digital gauge I've noticed some inconsistency that seems to be slop with my fence. I belive it may be causing snipe at the end of some cuts. I square the fence with a gauge on the miter slot within .0001, and a few cuts later it seems out again. Minor amounts but enough to bug me. I like how you explain checking for a the squareness of the fence to the table, but don't mention adjustment (because there isn't any simple way to adjust it that im aware of), which I think it would benefit from). Thank you for making this.

@inspiringbuilds 21 күн бұрын

Thank you Dillon. You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist that you may find useful too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@houch7640 4 ай бұрын

Great Video, way better than the manual! Can you please do one with the Dewalt DWS 779....I just can't get mine to cut 90 degree cuts

@inspiringbuilds 4 ай бұрын

Thank you, I appreciate you watching and the feedback. I will do another video if I run across that model, but a lot of these steps can be used on any table saw. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@DIYBuilt Жыл бұрын

Thanks, a lot of great info here.

@inspiringbuilds Жыл бұрын

Thank you! I tried it to make it a one stop vs having to watch a dozen or so videos for all the setup and adjustments needed. 👍

@jordanmoretti297 6 ай бұрын

Thank you sir! Fantastic video.

@inspiringbuilds 6 ай бұрын

@geomax3465 Жыл бұрын

Amazing Video! Thanks!

@inspiringbuilds Жыл бұрын

Thank you, I appreciate you watching and commenting. 👍

@tobbe7907 3 ай бұрын

Thank you for this! 🙏🙏

@inspiringbuilds 3 ай бұрын

You’re welcome and I’d be happy to have you as a subscriber. I appreciate you watching and the feedback. I put together a playlist that you may like too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@liberalman7745 3 ай бұрын

amazing introduction

@inspiringbuilds 3 ай бұрын

Thank you, I appreciate the comment and you watching. Was the fingers part your favorite part of the introduction? 😂

@mikealmeida6074 2 ай бұрын

Thanks for the video. I just bought this yesterday, but my fence will not slide freely. It seems like the knob that adjusts the fence is way too tight and will not budge. Any ideas to get it loosened up? I've tried loosening with a wrench but it won't move.

@inspiringbuilds 2 ай бұрын

Thank you, I appreciate you watching and the comment. I know it may sound silly, but did you unlock the fence lock lever? This can be found at 1:38 in the video.

@williamaugustus3296 6 ай бұрын

I'd love to know about your dust collection upgrade for the Dewalt miter saw in the background. I have the same model and bought an aftermarket port on Etsy that only offers a slight improvement.

@inspiringbuilds 6 ай бұрын

Hi William, thanks for watching and welcome to the channel. To be honest many have tried to solve for poor dust collection and there isn’t a perfect solution. Here I used a tool drawer liner and have it cut like a scoop to cover a larger area and fastened it using the stock screws (a strong magnet may work too). I then used an adapter to fasten a 2.5” dust collection tube to.

@EdwardHeavrin Жыл бұрын

Great video. Thanks

@inspiringbuilds Жыл бұрын

Hi Edward, thanks for the feedback and great to hear! Welcome to the channel and congrats on your new saw. 👍

@dustinballard3821 8 ай бұрын

Awesome video and very helpful. I do have one question if the fence is not 90 degrees to the top of the table is there an adjustment to fine tune that or not

@inspiringbuilds 8 ай бұрын

Hi Dustin, thank you for watching. With the issue you mention that is one design flaw with this table saw. If it’s with intolerance I personally would not recommend to mess with it. There are methods people have tried such as with spacers, but I would only go that route if absolutely necessary.

@dustinballard3821 8 ай бұрын

Ok thank u very much it really isn't bad enough to cause issue but if there was a way to adjust I was going to thank u so much for getting back to me and again love the video very helpful

@inspiringbuilds 8 ай бұрын

You're welcome and congrats on the new saw. If you didn't get a chance to watch all the way through I recommend these upgrades for the saw: Precision Miter Guage: amzn.to/3HqU52A Diablo blade: amzn.to/3Hr0GKa Digital Angle Finder: amzn.to/3NrINPo

@dallo8055 7 ай бұрын

Great video! Thanks for the time!

@inspiringbuilds 7 ай бұрын

Thank you, I appreciate the comment. Congrats on the new saw! I will be releasing new add ons such as helpful jigs videos soon for this table saw. 👍

@inspiringbuilds 7 ай бұрын

@TF-uk2gn 8 ай бұрын

Thank you! Great video

@inspiringbuilds 8 ай бұрын

Thanks so much, I appreciate you watching and leaving a comment. Hopefully future videos help as well, have a great weekend!

@rexcampbell3137 9 күн бұрын

WOW!!! Thanks!!!

@inspiringbuilds 7 күн бұрын

Thank you Rex! I appreciate you watching and the feedback. I put together a playlist that you may like too (I will continue to add to it) that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@user51109 11 ай бұрын

I have had this saw for a few years now. Made lots of things with it. My deck dips slightly around the throat plate which makes getting a true 90 degree blade extremely hard. Other than that, I love it.

@inspiringbuilds 11 ай бұрын

Agreed, it’s a great saw. For trying to square it up in your situation would a larger square help? I’ve also found that you want to do the steps in the video after owning the saw for a while as well. 👍

@user51109 11 ай бұрын

@@inspiringbuilds I have thought of using the larger square. It is worth a shot. I will be working on the saw tomorrow and will give it a try. Thanks

@mikegrier2829 8 ай бұрын

I’ve had my Dewalt saw for a few months now. I went through a setup process initially, but this video clarified a few points that I didn’t quite grasp the first time around. Others may have eluded to the fence not being 90° to the table. I have that issue. When placing a square on the table and then upright against the fence I get contact between the square and the fence at the top of the fence but not at the bottom. I tried a different square and it was very close to 90°. Who’s to say if my squares are actually square? At any rate, I don’t feel that this will affect my work accuracy enough to matter, but it would be nice to know if there’s an adjustment for that. I have not found one.

@inspiringbuilds 8 ай бұрын

Thanks for watching and welcome to the channel. I’m glad the video helped! With the issue you mention that is one design flaw with this table saw. If it’s with intolerance I personally would not recommend to mess with it. There are methods people have tried such as with spacers, but I would only go that route if absolutely necessary.

@mehulpgajjar4901 12 күн бұрын

Thank you sir

@inspiringbuilds 11 күн бұрын

You’re welcome and I’m glad it was helpful! I appreciate you watching and the feedback. I put together a playlist that you may find useful too that will expand the range of projects you can take on with your table saw while adding safety, accuracy, and efficiency. kzfaq.info/sun/PLxLuwzp7QVPS1GH8p9VvVB-n92f6GCm7e

@mehulpgajjar4901 8 күн бұрын

@@inspiringbuilds Thankyou Again, i m from India.

@inspiringbuilds 8 күн бұрын

@@mehulpgajjar4901 You’re very welcome and awesome, I love having subscribers from all over the world and being able to help and inspire!

@user-no6sy1pc2t 2 ай бұрын

looks like you installed 254 blade? uk it states 250, are the uk us models different? thanks for your video.

@inspiringbuilds 2 ай бұрын

Thank you for watching and glad it was helpful. For the blade I used the one in the link below that should work for both of us. Diablo blade: amzn.to/3Hr0GKa

@danielwoods5316 Ай бұрын

How do you adjust the fence if it leans in towards the blade at the top, or out from the blade at the bottom? It's the one adjustment that I haven't been able to find a good answer for. Thank you for this wonderful video!

@inspiringbuilds Ай бұрын

Hi Daniel, thank you for watching. With the issue you mention that is one design flaw with this table saw. If it’s with intolerance I personally would not recommend to mess with it. There are methods people have tried such as with spacers, but I would only go that route if absolutely necessary.

@milinratanasen6228 8 ай бұрын

Can you clarify at 10:13 about placing a straight edge on the table touching the 2 blade tips? The riving knife should not touch the straight edge? If I place a straight edge parallel to the blade and knife, it should touch the blade but not the knife?

@inspiringbuilds 8 ай бұрын

Good question and thank you for watching. The tips of the blade are slightly wider than the riving knife so take a straight edge and have it flush against a tooth towards the front of the blade and the other end flush against a tooth on the back of the blade. Doing so you want to ensure equal spacing and that the riving knife does not touch. 👍