I made the mistake of using their video for the actual install. Yours was much clearer with close-ups. Theirs was filmed from 200 feet up and you could not make out any detail especially running the Black wire next to the guard and making that neutral connection. I may go back and add tape to mine since I didn't like the way the connectors stuck out of the vinyl covering.

I did my upgrade three years ago and it's been awesome ever since, I've recommended this upgrade to those with the DWS779 saw, I think the upgrade kit is the only thing that distinct the difference between the 779 and 780.

Nice video, thank you. I have this light on my other chop saw and you will never go back once you use it. You can even see the individual teeth on the shadow for even more fine cutting. My terminals on the wiring harness were tough too. I stuck a straight bladed screwdriver in to twist the female end open just a little and voila, easy peasy.

Great mod. I think now I might actually go for the 779. I do wish the light was triggered by the saw trigger rather than having a dedicated switch, but it's one minor extra step.

Love how in-depth you went on this install! Thanks!!! Although I am kinda shocked that a saw at this price-point doesn't already have that light built in, haha

Just got the 779 definitely getting this upgrade !

Thank you so much for the video. Upgrade went smooth!

Thank You for the video...This is a must to have.

Thanks' for the video, I just got my upgrade kit and the little piece of paper that has the link to the website for the install video goes nowhere. I Googled it and found your video; works like a charm. FYI: you don't need to replace the bottom yellow piece of the handle, the old one is an exact match. Unfortunately you can't buy just the top part of the handle. Thanks again.

Just got mine today! Cant wait to light it up.

Sweet upgrade man, that definitely makes a huge difference 💡

This answered some questions for me. Thank you for your video!

Great video!!! Appreciate the detail you did on the product. Great job!!!!

Awesome video. I just ordered my light kit

Cool vid...i just got this saw..so thnk you for the info!

Great video. You rock dude.👍

I installed one. Very easy and a great mod!

Just installed mine I love it

Great video. Thanks for sharing

I just bought the 779 but only because the 780's were not in stock at the big box stores around my area. My 12-year-old slider seized the motor bearing on the belt side mid cut and I had to get an immediate replacement in order to resume work. I have been cutting on the 799 for a couple of days now and don't in any regret this purchase, especially considering the relative low cost I paid of $399+tax. For the most part It has the same specifications as the 800. After watching this video I'll be satisfied adding this light kit and calling it a day feeling like I got something close to the 800 and for around 50 bucks less once the smoke clears. Besides the 800 having a cast aluminum knob for the bevel setting lock rather than 799's plastic one, what are the other differences between the two? DeWalt may be able to justify the extra cost after all.

Great job with the video. It definitely helps!

Just installed the light and everything went smoothly. Yes, the piggyback wire connection was a pain in the neck, but it came out alright and amazingly enough, every screw that I took out went back where it belonged, so no duct tape or wire ties were used...

Great video, I think you have me sold on what miter saw to purchase.

How much did the light cost?

Oh man, another thing I absolutely need ! Alas, I have the DWS 709 and the kit is not compatible.

Judging by some of the comments it appears that as far as the handle goes you should use the new upper and keep the old lower part of the handle. Can anyone else confirm this?

Beautiful.

Might want to check the other screws on the power switch while you’re there. The other 3 connections on mine were not tight. I got 2+ full turns on each, getting them good and snug (no, not vein-popping tight). The red wire I got almost 4 full turns. I’ve only had the saw ~ 2 months, so seems strange that the connections wouldn’t be tight.

The laser for me is to bright and the glare makes seeing the marked line difficult when used on other tools I used in the past.

Nice, did you ever determine if you need to purchase the actual handle with the upgrade kit, or can the stock handle be used?

Dewalt missed the opportunity to make these as upgrades. That would be cool if dewalt would release little part upgrades to stationary tools. Just so you don't have to upgrade the entire tool. I understand that is not how business works, but it would still be neat. Lol

Any idea on where to find this attachment, clicked on your link but it gave me an “OOPS” link?

What’s the name of the system u used on Amazon

Will it work on the 💩 💩 type 22 model?

Tried purchasing one through your link but it's broken (404)

Steep price for added upgrade. It should be $39.99.

Any idea if this can be retro-fitted to the DWS773 model?

Who makes cuts at night, hence the need of a useless light! If you can’t see your cut, you should refrain from using power tools.

I'm not a fan of this pot-metal that mostly makes up the saw parts.