Topcon Ls-b200w machine control receiver.

Рет қаралды 4,552

Digginok

Жыл бұрын

My first impression of topcons latest receiver. It’s kinda cool!

Пікірлер: 38

@trickmytractor7187 Жыл бұрын

Awesome setup

@Digginok Жыл бұрын

Thanks! I think I will enjoy using it.

@albertmcalister9066 Жыл бұрын

You made a comment at the end of your video about leaning on your tripod, as if it had thrown it out of level. I was working on a job once where they were setting concrete forms, and the ground was spongy, and it was pumping when you walked on it And they were having a heckuva time keeping the transit level. They finally figured out that the ground was moving every time somebody walk past the tripod. They dug three post holes about 2 1/2 feet deep and put sacrete in them to set the tripod on. Half the forms on the job were off grade.

@Digginok Жыл бұрын

Yeah I have talked to guys that do robotic layout, they say that if you set an instrument on asphalt the heating from the sun can move them too! Just gotta be aware.

@Buzz407- 3 ай бұрын

Fill your pole with some sand and weld a cap on. Should get rid of the vibration.

@RockCreekEnterprisesNM Жыл бұрын

Very cool Frank Frank. I definitely need to update my receiver. That is a supper nice one. I like the tripod too😍 You should have seen my set up today with the receiver post tie wired to the skid steer bucket 🤦‍♂️🤣🤣 but it worked

@Digginok Жыл бұрын

I would have liked to seen the setup, sounds like it works!

@RockCreekEnterprisesNM Жыл бұрын

@@Digginok it worked, but it was ugly. I'm trying to figure out a good way of mounting a pole to the skid steer bucket, it really needs to be at the cutting edge🤷🏻‍♂️

@Digginok Жыл бұрын

@@RockCreekEnterprisesNM I have seen some guys build an offset pole from the back of the bucket, maybe worth a try?

@lakepinesfarm1394 Жыл бұрын

That is some neat features on receiver, they have come a long way. You may be the only one in the world using that technology on a td8. Can’t wait to see the wife’s iPad mounted to rops. 😂

@Digginok Жыл бұрын

Yeah no doubt! Can’t wait to run it on the 930 and box blade, I gotta find a iPhone mount for a tractor! 😂

@scrotiemcboogerballs1981 Жыл бұрын

If you ever let that lazer stuff sit unused for a while or it gets rained on for sure take out the batteries and leave them out for the long unused and if it just gets wet before you can get it taken off the machine be sure to wipe out the battery area with some kind of electrical cleaner you don’t want to fight batteries giving you a bad connection I worked for a company that learned that the hard way I was ready to throw it away but they finally let me clean it and fixed the problem of it shutting off randomly

@waynevincent5448 Жыл бұрын

Really nice Frank, Lot's of features. I really like that stick plumb setting, would be really handy for the backhoe. With that single slope laser, when you set the slope, how far left or right can you be ?

@Digginok Жыл бұрын

I have used the slope off to the side a hundred feet or so, not sure what the limit is.. it’s usually close enough for drainage work parking lots and such.

@knoxmosby9776 Жыл бұрын

What’s up with the ole TD15? Looks major! Do you have a good source for undercarriages up there ? I’m hunting an used set of track groups for a td15-B.

@Digginok Жыл бұрын

We have a new set of bottom rollers, sprockets, rails and pads for it. The rails are pretty much done off this one. We may have some decent bottom rollers left over.

@leojunior7589 Жыл бұрын

First like frank😁here from Brasil🇧🇷 A curiosity Frank how much does this device cost🤔

@Digginok Жыл бұрын

Thanks! Around 2000$ us. There are a lot of different types and brands that are cheaper.

@FlanaganFarm Ай бұрын

Can u set a depth

@memyselfandifarmer Жыл бұрын

C cell? The only use of c cell is the wife.

@Digginok Жыл бұрын

That’s funny! 😂

@Jpaydirt Жыл бұрын

was this the ones we were looking at conexpo

@Digginok Жыл бұрын

No that was a gps. Not sure I even visited with topcon out there.

@diggerdave51 Жыл бұрын

Good video, Sir. I like my Topcon RL-H5 ! and i really like the new tripod who makes it ? Your friend from Michigan !!!

@Digginok Жыл бұрын

I bought this stuff from contractor tools in Texas. I think it’s a spectra product, I’ll check for sure when I get time. Thanks! Edit* it’s a site pro. www.contractors-tools.com/sitepro-fgc20-elevator-tripod-heavy-duty-composite-49-to-119-inches-extended/

@diggerdave51 Жыл бұрын

@@Digginok Thanks, I'll check them out !!!

@axe609 Жыл бұрын

Would a rubber or polyurethane pad under the pole mount help or worsen vibration?

@Digginok Жыл бұрын

Possible, I may try that

@13eckerlosmuerte 9 ай бұрын

Fill the pole with foam

@jimdorman1550 Жыл бұрын

You will love it. But, the main control, is still in you. And you can ignore the slope, just ajust to your light pattern. Run a simple one for years.

@Digginok Жыл бұрын

Hopefully it works out, I understand what you are saying. Tech is getting cheaper, fuel isn’t.

@jimdorman1550 Жыл бұрын

@@Digginok I gotcha. I was kinda saying, it is cool and you can simplify what you are doing with it. But it's still in the seat of your ass. Hahaha

@Digginok Жыл бұрын

This one having 360 degrees of pick up will make life easier for me, the old one I used took a lot of planning to use. I figured if I was gonna upgrade I’d get the latest stuff.