Edit: only thing I didn’t like was position of mix and volume knobs

Cool, good to hear it

Thanks for sharing Ronnie!

Great input to this discussion. The lack of xrl out is a big deal.

@@djhemirukahemisphere8893 Yes - I had EMI and I wasn't able to get rid of it completely until I got the gear that had XLR. My computer monitor was the culprit...

Ronnie, can i plug my deck in to this controller.

@@davetherave9222 I have the original FLX-6, which has the same in and outputs as the -GT. So if you meant to ask to plug in separate unit such as a CDJ or a vinyl player such as technics, then NO. This controller has four channels, but the 3rd and 4th channel can only be used via the buttons on the controller. The only input tot the controller is a 6.3mm jack microphone and a USB for connecting your laptop/pc. It also only has RCA outputs, but it does have a Master output and a Booth output.

What did you move to, and what did you find made it worth moving?

Traktor could NEVER be dead even WITHOUT trying to "keep up with the trends". In FACT, as a SOFTWARE, it's ALWAYS been light years ahead of the competition. Even with Stem Play. Only "difference" is VDJ and Serato have "built-in" extractors. And even THAT is limited to LIVE PLAY. They don't SAVE as a 4-Part file.

Thanks for sharing Evando.

One could remove the MFX mapping in RekordBox and MIDI map it to be CFX selector!

you're right

It was either the ns4 or this and I went with the flx6 cuz they have flight cases ns4 has little to no sort of cases available it seems

Yeah, what it lacks mainly is "pro" ins and outs, if you don't need them, you're right - you get four channels and excellent jogs.

@@digitaldjtips I’ve been looking at this controller vs the numark ns4fx It’s been difficult as hell to figure out which one is higher quality, got any opinions?

@@Wolvious Undoubtedly Pioneer DJ DDJ-FLX6-GT: 7

@@Wolvious in Numark or traktor s3 you get a much better sound card what is important if you are going to play outside of your bedroom

@@digitaldjtips can we solve that unprofessional ins and outs by adding audio mixers?

Thanks for sharing

👍

We agree, for this money we would have liked at least an Aux in and balanced outs.

Exactly

Just get adapters?

@@brayant152h "I wish this controller had better fx" "Just get an external fx unit"

@@lucasmaia8315 I will, you see? I didn't make an excuse.

Sadly we couldn't recommend the Gemini from experience, glad your mate is happy with it though.

I doubt it

@@digitaldjtips Sad times! The new Traktor Pro 4 looks neat, especially with the stems and flexible beat grids. Not that Serato (my current choice) is lacking tbh..

Yes.

yes it will

lol

No you’d have to map them to other controls

NS4FX doesn't unlock Serato DJ Pro, though...

FLX10, DDJ-RX3

yes

@@digitaldjtips Cool thank you

Bear in mind you don’t get Pitch’nTime for Serato with it, which we regard as essential for serious DJing and is officially very expensive to add.

Thanks for sharing

Nah, it's just a bog standard mapping, sadly not a very good one at that. Funnily enough, one of the very first controllers Pioneer DJ launched was for Traktor back in the day, I forget its name.

Yes :)

How do we find TSI mapping for traitor on FLX-6?

It would have been nice, but realise this is exactly the same hardware wise - it's firmware and paint job only where the changes have happened.

@@digitaldjtips Correct, that makes the Traktor kontrol s3 best in mid range 4 channel controller or m i missing some other good options ?

@@djshelin I totally agree with you, the s3 is still the best hardware in this class. value for money, excellent build quality. 480€ price,full traktor pro 3 license, XLR, external power supply .

@@spirosbulk Exactly, the reasons you mentioned are legit.

@@djstuc idk, the pro features you get in s3 are quite ahead of Numark controller i feel.

Love it!

All DJ controllers can do that, so you're good whatever you choose.

I personally have the FLX-6 and mix Drum & Bass, I rarely use any effects (especially not the large merge Fx buttons). I got one for 500 euro, right before the -GT version was released. So as I wanted to upgrade my older 2 channel ddj-400, This fitted within my price-range and satisfies my needs. (I mix at home for an online radio station, and play at small house raves with it. Here is works perfect, so issues there). As the controller is mostly plastic, it does have a nice feel to the buttons, faders and jock-wheels. For the price compared to other (more high end) 4 channel controllers, I do not regret buying it at all.

@AT1272 Sounds like you're trying to authorize something you bought 2nd hand? There's no reason the software shouldn't unlock with the native access app if you have a legit license. If this is the case, the person you bought from would have to deactivate the software from their account and transfer it to you. What exactly is your situation... did you buy from an authorized seller or off Ebay or something? Don't throw away the controller since it can be sold or donated!

@@slapopimp I never buy anything used. It was factory sealed and I bought it from Guitar Center. Its the biggest music store in the US. I can't sell it to someone because they will have the same problem I have.

@@AT-wl9yq I've bought plenty of merch from GC over the years, so I know about them. They also restock returns. The few times I returned a product, I returned it in pristine factory condition. Products that include software like maschine, where someone returned it, will likely have registered the device. Even if it's not a return, all someone needs is the serial number to the hardware to get a copy of the software. Someone could've dirty snatched your serial. Maschine doesn't need the controller to be used. FYI: You can sell the controller to someone that already owns the software that may want to upgrade from an older controller or lost theirs.

@@slapopimp The box was sealed, and I was the first one to open it. However, I did forget to mention GC did tell me there was no returning it once it left the store. I asked them could I bring it back if I got home and find something wrong with it. They said no, and we opened it right there in the store and tried it. Everything looked good. To be honest, I wasn't too concerned because NI is a well known company and I would be more concerned with GC. They haven't been doing well these last few years. What you said in your last post is all correct. Even if there was some issue with the serial number, I have a receipt and the product as proof. They could even verify it with GC. The problem is, you just can't contact NI. Its impossible. The closest thing you can get to customer service is automated troubleshooting on the website. I worked my way through all the menus until I got to a box that lets you type in the issue. I gave them all the information, several times. They simply won't make contact with me. I' m sure someone on their end could resolve the issue with the push of a button.

@@AT-wl9yq Ok... Lets see If I can assist. Just to be clear: You have native access installed- You used the Add a serial in the upper left hand corner in access to input your controller serial or product serial and what happens? What message do you receive?

The Traktor mapping is unfortunately underwhelming. You could make any controller do what this does by mapping it yourself to Traktor. The jogs sadly perform badly in Traktor, for instance.

This doesn't have illuminated jogs though? Except the central part, which is cool, yes.

Poorly as it turns out

@@digitaldjtips i figured 🤦🏽‍♂️‼️

yes

€649/£569/$649

yes, all TSI mappings work in TP2 TP3 features like mixerFX will not be there of course

Pretty standard on this type of controller

Yeah, sure!

So?

@@digitaldjtips not pleasant to listen to so letting you know

They say they are, but won't tell us anything else. Don't hold your breath.

It’s actually the controller audio but yeah

No

We are too!

Your audio settings will need fixing in Virtual DJ. Their forum should be able to help you. I think the rest is just a case of getting used to it.

For Traktor, the S3.

@@digitaldjtips thank you so much

JUST for playing at home and if you can cope with the build quality, this one is OK, but the DDJ-800 (although no longer made) is a much more accomplished controller.

It will

I am sure they are listening, but this may be seen as a stopgap, perhaps?

Probably, there is a page on their website (Algoriddim) with all supported hardware

As we say at the bottom of the piece, which for us too this isn't our favourite Pioneer DJ hardware by any means, we do approve of the direction, ie making all gear work with all systems.

@@digitaldjtips totally agree with you Phil!! thank you once again for the review and for what you have contributed to the dj community! maybe they could somehow save it if this controller was released with: 1) XLR 2) external power supply. p.s. sorry for my not good english.

The unit isn't stellar (never was). But I think the move for Pioneer DJ to even consider officially supporting more DJ software from other vendors (Native Instruments, Atomix Productions) for their hardware is somewhat a big deal! No more being locked-in to RekordBox, when there are a considerable size crowd that just love their Traktor or VDJ software. But what I am wondering or this is a one-time thing, or a policy change within the company; or at least for their future "FLX"-series.

Yup

No, you cannot plug turntables into this.

@@digitaldjtips I’m still buy it..that look dope that set up you got..

Yes

Yes, if you own it.

We agree.

I am currently looking for something like this but are quite new in this topic. What would you recommend for a beginner to start with? U seem to have some experience.

Thanks for the feedback Solaris.

We don't know but we guess so

May be not, they just painted the remaining stock. haha

That defeats the object of XLRs which are balanced cables, meaning they can run distortion-free audio over a longer distance, hence why they're added to pro gear.

6, not sure about 5.

$650

lmao what, its still trash

This isn't meant for playing out on in pro venues, you're right.

@Digital DJ Tips Respectfully' It's definitely a Solid Controller that offers a decent amount of features and performance to Satisfy most Dj's with Mixing & Recording, Demo's or If you are booked to Play a Set at a Nightclub / After-hours having your USB Adapters & Freshly burned CD's already made, You'll have the Crowd going all Night!

What do you mean? the hardware? No, it is not club quality equipment and clubs use "separates" (CDJS, DJMs). The software? Rekordbox/Pioneer DJ already is, arguably.

What would you recommend for the 600

@@DJLyncho I would recommend DDJ 800 if you have a bit more then 600$

@@olaf4487 But that's more. What about £600

@@DJLyncho that’s not that easy to tell. I need to know what are you looking for in controller. I recommended Ddj800 because it’s very similar to CDJs, Mixer section is also the same

@@olaf4487 Oki doke ☺️

No, but we will let you know when we do!

Well they never tried to claim it was "new"

According to their website it's "new" And of course we all know it's just the same controller wrapped differently (with the tractor exception). But this is why I'm personally not a fan of pioneer dj. It just feels like they're releasing more products for the sake of releasing more products.

@@Pokarookris It gives the appearances on the surface of staying relevant and in the news cycle and social media reviews. Some websites are still reviewing the DDJ-400 and DDJ-SB3 as if they were new. On the other hand: Traktor hasn't had any hardware updates, and only recently the software has gotten updates and NI doing subscription features for Traktor.

Hmmmm...

We tend to agree, unfortunately.

I agree that the FLX-6 feels a plasticy, like the entry controllers. However, it does feel more robust in my opinion than the ddj-400 for example. I bought the (non -GT) right before this one got on the market and got it on sale for 500 euro's. For that price I am very happy with the controller as I really needed a 3rd channel for my drum & bass mixes as my previous 2 channel controller was getting in the way of keeping the flow going in my mixes. For me, and what/where I use it (mostly at home for online radio, or at small house raves,) this controller performs great, however I do agree about the downside of not having an XLR output. I would say that 650 (which they sell for now) is a bit steep, I feel my discounted price makes it worth it though, as the FLX-4 is priced at 319 euro's, the extra 181 I spend to have 4 channels is definetly worth it for me. However, if anyone is looking for a better build quality controller with 4 channels from pioneer the DDJ-1000 is a good option. The -1000 is not really for sale at many places anymore though, as it is being relaced by the new FLX-10 (Basically the same controller, but some updated features opposed the the -1000). It does come with a steep price of 1649 euro, which is a bit crazy for me to spend. If I were do spend that type of money I would save up a but more and directly go for XDJ-XZ (4 channel, stand-alone controller) which comes at around 2500 euro.

So many people make a big deal over the XLR jacks for absolutely no reason. In order for XLR connectors to do what people think they do, 3 things need to be in place. The cable has to be balanced, and both components have to be balanced. Unless you have all that, using the XLR jacks are identical to using RCA cables. 95%+ of the time, this is the case. I have a DDJ1000 with XLR connectors and that's not balanced either. People just think it is. If you have a rare case where you actually need balanced outputs to make the unit compatible with something like a high end mixer that really does have balanced inputs, you still have nothing to worry about. Use a DI box. That's what they make them for. And its a better solution because the parts quality is much higher. Unbalanced XLR = RCA. When only 2 of the 3 pins are used, you have a single ended connection.

The vast majority of people DJing in their bedroom don’t need XLR.

@@Ronniezim That's true, but I wasn't really talking about people in their bedrooms. I was talking about everyone. The point I was trying to make is 99% of the time when people connect this type of equipment using the XLR jacks, its no different than using RCA cables. There's other requirements that have to be met in order to get the benefit you think you're getting.

In our view there are better reasons not to buy this controller, it hasn't turned out to be one of our favourites - but some do love it!

@digitaldjtips it would be cool to find something with 4 channels in the same price range with normal sized faders. The Numark looks nice, but it doesn't have gain LEDs...

Different type of unit though.

No, with hindsight the Traktor mapping for this is very poor - not recommended.

We're not fans

@@digitaldjtips and so much competition mixstream pro, ddj800, s4 mk3, hercules t7 so much in the range :)) and all of them better

В Opus Quad)) но я действительно не понимаю как можно пользоваться контроллерами Pioneer которые они делают сейчас. Это просто шлак. Я вот посмотрел на этот FLX6 и взял себе Traktor s3.

Jog on please 🙏

@@digitaldjtips jog ur mom