They make undersized router bits, but your solution is much more elegant.Those bins look super cool. Loved the video.

Very interesting how you create your dado's. I've always used a radial arm or table saw. It's always nice to see someone show you something that is so clever, that your left wondering "why didn't I think of that years ago"! And I actually have a router template kit that would do exactly that! Awesome job man!

I hate brass standard screws, but you made it work and it was the right choice for this. You the man Jimmy.

Reminds me of the parts bin my grandfather had set up. He used the old metal 1 gallon oil cans, cut off one side and rolled in the edges, and had a set of shelves on either side of the door into his shop that he set up specifically for those. Remember going through those cans for the odd nut or bolt for whatever project I was building under his supervision at the time.

It's always beautiful when something is hand built & yet has the uniformity & precision of a machine in the symmetry of the look.

Jimmy, I really like the one. I think it would be bad ass if you made one just like it, except with drawers that had the same steel band on the edges and the brass screws around the edges. I agree with someone else that said Diresta's cut is the only reason I subscribe to this channel. I love your work.

it's projects like these that remind me why Jimmy is the the best. That dado technique was simple and brilliant and it looks so bad ass!

Great one Jimmy...love saving things from the trash. Saving things for "future use" is a way of life.

that jig is brilliant! just a little pre-planning saves a lot of time.

Loving the dado slot tip. Good quick system!

BEEN DOING THE ROUTER MODS FOR YEARS >>> WHEN EVER I BUY A NEW ROUTER I GET A FEW EXTRA BASE PLATES >>> YOU CAN BUY ALL MATTER OF EXPENSIVE JIGS AN FIXTURES KEY WORD BEING EXPENSIVE >>> BACK IN THE DAY ALL YOU COULD REALLY GET WAS THE ROUTER THE REST WAS UP TO YOU >>> NECESSITY IS THE MOTHER OF >>> LOVE YOUR STUFF JIMMY D. THANKS FOR THE HARD WORK BROTHER >>>>>>>>>>>>>> BE BLESSED >>> ABC

Love it. I have a bunch of "Pullman" bread pans, four loaves, I'll now be doing something like this.

Diresta... The most thing i like in your vedios is this light speed yo do work with.... Well done Sie

Awesome dado jig and very nice work, Jimmy!

The bins were a great find. I have a feeling you would enjoy being a garbageman, like I used to be. I found lots of great stuff on the job. Too bad, these days it's all going to automated, and the guys don't even get out of the trucks anymore. Lotsa useful stuff going into the landfill. Nice job on the storage unit.

Right on! The brass screws are a nice touch.

Fantastic Jimmy! Love the edge banding - I've logged that one and will be using it somewhere for sure. The bins themselves are very cool and you've used them to great effect - what else would we expect! :)

That steel edge banding is rad! Like it!

Nice. I dig the steel, edge banding. Thank you for all that you share with the maker folks!

I like the steel face frame Jimmy. Fits the look of the bins well.

I like the dado jig. Learn something new everyday!

Your design style shines through brightly on this one. Love it jimmy

Love the look of the brass on steel

That dado jig is fantastic. I'll definitely put that one in my mental toolbox. Thanks Jimmy

Thanks JD! I picked up SEVERAL great Tips! I especially dig the Metal Edge Banding with Brass screws! Much Love Brother! Have A Super Week!.....Gus

this is one of my favourite things you have made jimmy ! there is just something so perfect about the form and function that does it for me . thanks for the share

loved that jig for the router! Awesome project!

I have some old metal cabinet draws i have been thinking of doing some like this with. Brilliant as ever.

Just beautiful! I'm blown away at everything you build! I'm really glad I found your channel along with the other channels you appear on. Thanks for all of the videos.

good job as usual. always enjoy watching you build

Man, i've watched a lot of your vids and let me tell you my man - you are a true talent!!!

After years of watching you ,this is the first time I've noticed your not using an old time radial arm saw ! You will have room for one in your new shop. :-)

I hit the like 20 seconds in! knew it was going to be awesome. Love when you do projects like this Jimmy!

I hesitate to critique in any way, but literally the only thing I don't absolutely love about this is the exposed screws on the outside plywood. I realize this is being used as shop furniture, but man, what a beautiful piece - could easily be sold for many thousands in some boutique furniture store. Excellent, excellent work!

Love that dado router jig trick!

loved this unit! nice work!

Awesome Jimmy! Those brass screws set it off.

Love all your work it’s very stress relieving to watch keep them coming thanks

Awesome as usual Jimmy...loved this piece man ☠️🎸🍻👍

Looks absolutely great!

Stunning. Great work as always!

Wow, it's cool to see how those screws really made that thing pop!

great video thanks for teaching me about metal blackener. used it on some brackets for a bed and turned out great.

Looks great! Thanks for sharing Jimmy! Love it :D

Very cool Jimmy....Nice job

Fantastic storage unit! Very inspiring!

I've been waiting on this video for the last few weeks. So good. I learned around 15 things here and will incorporate them into what I'm building. Thanks Jimmy.

Nice work. Brett even shows up in this one! Well done Jimmy!

After have seen a ton of his vids, I still learn some tricks.

It's great to see the way you go about your projects. I always learn something :-)

Diresta is the king!! :)

I love this project. I think that this and the tool drawer project would work well in my art studio. Your efficiency ratio fills my little O.C.D. heart with glee.

Great project . love the face frame and brass detailing

Very nice Jimmy!

JIMMY. ANOTHER GREAT JOB!!!!!!!!!

to hell with the ass biters Jimmy. I think the project turned out great you knew it would especially after holding on to those pans for 15 years LOL. I think it turned out awesome my friend keep on creating.

amazing idea to build the dado jig!!!

Nice build! Awesome idea gluing the router guide. I'll remember that one!

👏🏻👏🏻👏🏻👏🏻 wonderful work !!! My special congrats !!!

Great job Jimmy! It looks fantastic. I enjoy watching your videos. Some of the stuff that you build is an inspiration to a lot of people, myself included. I've used some of your designs with a little change to work for me. Thanks for sharing

Dig the dado guide idea, interesting approach that makes sense.

I like how the edge banding looks. Cool project.

Great tip regards the router jig. Cheers.

Great dado technique. Thank you. I will definitely use it. Your the Boss.

Awesome like usual.

That is so beautiful. I have about 500 plastic "TSA bins" (they're rubbermaid commercial plastic bins) that needs something like this, but less cool... they'd look silly with a steel front with brass screws...

nicely done Jimmy. ^^

good build sir! Bravo!

love it. looks great.

Like the way you produce your video's. Entertaining and informative. Thanks for the effort!

Every time Jimmy talks about that big steel Nut he calls it a Bolt :D

awesome look, didn't even know that "blackener" existed. and that was a lot of screws going into that metal banding. turned out nice though

Nice project, well explained, and great presentation.

Just freaking awesome.

Nicely done

your such an extraordinary builder, i'm so excited i am signed up for your class next year

You are awesome at what you do. Inspiring. Bad ass

Awesome look on the finished piece!

That router guide is great.

I always learn something from you... great video cheers

Awesome job well done,love it.

As always, it seems so easy when you make that....congrats

Envious of your skills my friend :) Looking great!

Awesome. I would totally buy that.

It's simple but amazing!!

Jimmy, you’re my idol. Not to be weird, but I love this stuff you do.

Very beautiful!

Excellent content!

She's beautiful Jimmy! I've been thinking about building something similar, I love the router idea!

Always classy in a Classic way Stay well my brother

hey, he used my pencil! haha thanks jimmy, and great vid!

i wish i would have seen this video a few months ago. That router jig was very interesting. I ruined a bushing for my 1/2 bit mid project and had to use guide rails. This jig would have been nice to use.

Love the look! Be interesting to see a tall rolling cabinet set into a steel tube fame.

Someday I can make my own. Great video. Keep inspiring on us thank you sir. Thumbs up. Godbless.

Nice job

This would look good under a work bench built in a similar style. My step dad built drawers to go under his discount store work benches "leg kits" as there were no add on options for these kits. In the industrial McMaster Carr work benches, there are a lot of choices like a drawer stack or a locking metal cabinets to hold large tools. Yes we can build these ourselves but I find that trying to work in time to demo a bench and build storage is hard because we use these work benches daily. I think that in my future life I will make the extra upfront effort to build out whole walls of upper and lower cabinet/benches on the walls of my shop area/garage. I would like to add "I don't want a water heater in my garage again" it needs to be outside I do want a sink with hot/cold running water and I want to be able to run a hose off the faucet to wash cars with hot water. On the subject of steel work benches someone needs to build a "leg kits" that you lay whole 2x4's inside the leg channel to keep the thin cheap steel from bending the wood adds mass making it a more Perfect Union of bench top, in to the legs and in to the concrete floor. When I hit something with a hammer I want it to feel like I'm using a 5# lead shot mallet even if it's a 4oz brass hammer. Peace through heavier hammers

Great build Jimmy! Its always fascinating to see you build stuff but the curiosity still remains as to how you came up with that idea. In this video you showed the sketch you came up with before building it. Could you please show your pre sketches in your future projects? As someone who sees you as a mentor I would like to know more about your though process through your sketches. Thankyou

Great Job! I can see someone request one of these for office mail boxes.

those are commercial roasting pans love the repurpose

Fantastic!!