Disaster! My RC Tank Arrived Damaged! Bodging A Repair. Tongde 1:16th M60

Рет қаралды 12,275

Күн бұрын

In this video, I unbox an RC tank sent to me for review from the manufacturer Tongde, only to discover that the barrel was damaged, the power switch was broken, and the tank had no forward and reverse drive as well as a load of other issues. After a few hours of tinkering and repair work, I was able to fix almost all the issues and take the tank out for a test drive.
Watch as I review the tank's features and performance, including its speed, maneuverability, and driving capabilities. I'll also provide some tips on how to fix common issues with RC tanks and how to make the most of your own tank-driving experience.
So sit back, relax, and join me for this exciting ride as I put this RC tank to the test and share my thoughts on its overall quality and value. Don't forget to like and subscribe for more reviews and tutorials on RC tanks and other awesome gadgets!"
You can find way more content from RCKicks on the below links as well as help support the RCKicks channel by becoming a Patreon:
Patreon: / rckicks
Or
Buy RCKicks A Coffee: www.buymeacoffee.com/RCKicks
Or
A Direct RCKicks channel support tip via Paypal: GavinEvans@RCKicks.com
More RC content from RCKicks.
RCKicks Facebook Page: / www.rckicks.co.uk
RCKicks Group Page: / 449280332477997
RCKicks Instagram: / rckickscom
#RCTank #RCKICKS #TongdeM60

Пікірлер: 99

@wadeskelton7585 Жыл бұрын

Kudos to you for hanging with it and getting it working Gavin it’s a looker when it’s all put together & running 👍

@xw1978 Жыл бұрын

Shocking quality. Never heard of this brand in china tho. Heng Long tends to be the more popular brand.

@AddamsPlayground Жыл бұрын

Wow, that poor thing got drop kicked around a few times! I got two of the Heng Long tanks in February and I lover them! Very similar but I can test you the internal construction is a good bit better! I only had on minor thing where the magnet for the IR sensor popped loose and I had to tear it apart and re-glue it into place. Otherwise they are both great. Each was $200 USD and came with the metal drivetrain and metal tracks. I am saving up for one of the full metal tanks from Torro, lots more detail metal chassis, they weigh in between 10-15 pounds!

@traxxasfans Жыл бұрын

They should either give you a refund or send you a new tank

@michaeldorich4485 Жыл бұрын

You have so much patience. I would've been ready to throw it against the wall. You did a great job! It looks great, but it's a definite no for me. Thank you for showing is everything. You did a lot of great work!

@nic.25 Жыл бұрын

Amazed that it would be sent out to anyone in that condition. Obviously no quality control with that company.

@BlackoutZ169 10 ай бұрын

Love the M60 and Magach series of tanks

@wolfiecrawlsrc58 Жыл бұрын

I have a Heng Long tank, but paid extra for metal tracks and steel gears, and so far, apart from a very small part breaking on assembly, but probably because I was impatient and trying to get it to fit. I’d love a proper tamiya tank but cost cant be justified. However it will be getting some teigen upgrades in the future…. It’s a great base for upgrading.

@aac993 Жыл бұрын

Had Tamiya tanks. Meh. They are just ok. Not great. I think Heng Long tanks smoke Tamiya tanks at a fraction of the cost. I have 4 so far and have no regrets.

@SuperSavage35 Жыл бұрын

In my experience you very much get what you pay for with tanks. I had a entry level Heng long and it was awful, I then got a full metal and full option one from Taigen and it was sooo much better. Still my dream would be to one day own one from Armortek 😍

@garyrafferty8653 Жыл бұрын

I was fortunate enough to get an Armortek panther g after years of waiting. They are something else.

@robambrose4199 Жыл бұрын

Yes. I have been looking at Armortek tanks. I'd really like the Universal Carrier but those cost nearly £2k just for the kit. I have got some little Tamiya tanks to try and motorise or make rc though. Until I win the lottery.

@johnwilson4970 7 ай бұрын

a friend bought the M60 as well. had issues like weak torsion bars, cracked wheels around the bushings, gear box and the barrel as we'll. I would never buy one. I work on RC tanks have 46 tanks Heng Long, Mato, Haya and Tamiya. the M60 does look good

@dawnmarshall8336 10 ай бұрын

If you rotate the turret all the way facing rear seems to work best for me. Sucks you got a beat up tank. Because they are pretty sweet. I have two of the three.

@richardinman748 Жыл бұрын

I purchased mine from a reputable dealer in Hong Kong. There were none of these issues. Tongde, is a relatively new startup. I think the owner used to work with HengLong. Tongde is making an effort to release tanks like the M60 that no one has done. Looks like someone purchased your tank with a goal of gutting it, messed it up, boxed it up and sent it back. Mine works great and the seller was outstanding to work with. Mine was sent to the states with no breakage.

@RCKickschannel Жыл бұрын

It was a bit of a strange one

@rcigv5422 Жыл бұрын

Dang! Gavin, if they sent it to you for review, you should have just sent it back, but nice job on fixing most of it. Now you have documented all that was wrong so the manufacturer can see it. I just think they sent it like that after a customer return or similar, maybe not their intentions to send it in that condition and not damaged during shipping due that the box looked pretty much in one piece. Thank you for the great content sir!

@Grundag 5 ай бұрын

Good Afternoon! That's sort of what we have to do with shipped Tanks of all cost levels. We have to be Modelers to fix them just so we can enjoy running them. Don't get me started on detailing and upgrading them for realism. :o) Great job on getting this Tank to run and function! ( Never use the BB Shot that ships with these tanks. It's hardly ever completely round. Get a Premium Grade bottle of Airsoft BBs. Your BB cannon will be much happier. ;0)

@lael1236 Жыл бұрын

Oh Man that looked like soome one actually tried to destroy it, I'm glad you took It nicely and were able to fix It, just before you said It I was thinking mmmm i wouldnt Buy It 😅 hope they send you a new one, I would be very mad about all this!!

@EM-do9em Жыл бұрын

That's was a fun video. Great job.

@gosseriestepan7631 Жыл бұрын

I have bought 2 years ago 2 heng long tanks ( m1 Abram and a challenger II) for very little money. Really impress by these 2. Should check for it, really good price for what it is

@mrtankalotrctankschannel Жыл бұрын

Hi! the interesting thing is , that tognde tk board has 2 servo ports, one for recoil and one for servo elevation, (you can easily slap a servo onto the side of the bb unit, open up the mantlet hole and put a wire linkage to the barrel, i think the barrels are all metal and push fit, there is a video on someones channel to show how its done... 🙂)a pain it was trashed a bit in shipping, but the motor wires were not put in in the factory!. i was looking into one of these, but its just a bit too toy like, but a company called DKLMRC are coming up with a detail up kit for them. i think there will soon be a uk stockist for these, so they will be checked before delivery, and they haven't been used as a rugby ball, but a few thing you had were not built right at at the factory, must have been a Friday!! enjoyed watching your journey 😀 and i love the tamiya stuff, i miss my old falcon.

@RCKickschannel Жыл бұрын

I’ll check that out 👍🏻

@davidf2281 Жыл бұрын

7:17 Blimey, that is one expensive professional-grade mess.

@peterjohnson9243 Жыл бұрын

PoS that Gav. Good video though oppo.

@2Geek2bChic Жыл бұрын

I want to buy a rc tank but it's a real minefield out there..... I wish there were more brands to choose from because Heng Long seems like the only real option for RTR but I'd love to see more reviews...... sadly I think we've seen more than enough from Tongde! Every major part/feature on the tank you reviewed was damaged/broken. If that was a brand new tank (maybe it was a returned item?) I want nothing to do with Tongde. The interesting part is that the Tongde tank looks exactly the same as the Heng Long tanks with all the same features. I think that might even be the same radio but with a giant Tongde badge on it.

@goldenmanuever1176 Жыл бұрын

Heng Long is the lowest of the pack. Heng Long (cheap, low-end), then Taigen (above average, very nice) and then Torro (the best, Mercedes). They are pretty much made in the same factory, but quality and options levels is what sets the brands apart. There are tons of tanks RTR to choose from, you just have to look in the right places.

@2Geek2bChic Жыл бұрын

@@goldenmanuever1176 That may be true but as far as I can tell Heng Long is the only one that offers both IR combat and Airsoft bb's in the same tank and I'd prefer both. I'm not sure why the two "better" brands can't offer the same. The biggest difference is the all metal lower haul so I'm trying to figure out if it's worth it because it more than doubles the price of a fully upgraded Heng Long.

@BobWetBlanketWilkins Жыл бұрын

@@2Geek2bChic You can fit an Infrared kit in an Airsoft tank and have both.

@scottfordbrewer4380 Жыл бұрын

Finally a M60 tank and it's garbage....never would have left Tamiya like that. The person who assembled it and the QC needs to find a job somewhere else is is reputation damage. Good build recover!

@andyp6699 Жыл бұрын

Hi Gav. that is a load of sxxt. Try the HENG LONG tanks .They are as good as the Tamiya tanks.

@RCKickschannel Жыл бұрын

I like the full metal ones. I’ll get one at some point for the show 👍🏻

@BobWetBlanketWilkins Жыл бұрын

How do you work that one out? Heng Long are nowhere near the quality of Tamiya.

@mikeymike3240 Жыл бұрын

Hey there Gav, that was a momentous task you had to sort out so kudos for sticking with it, buuuuut , I think you should have got the Heng long tanks, i have the Sherman tank and just love it to bits, no damage and everything worked out of the box and it has every function that you’re one has, if your one is the Challenger it was definitely a challenge for you to get sorted lol 😝 Niiiiiiiiiiice video Gav

@RCKickschannel Жыл бұрын

I’ll try and get a Heng Long on the show at some point

@blitzrc4713 Жыл бұрын

This tank is made by a person who used to work for Heng long looks like they have serious quality issues if not built correctly they can have troubles great when working. Not to hard to work on once you learn.

@paulrobinson9355 Жыл бұрын

You need a refund or replacement! Kudos to you for at least making good content out of it 👍👍

@marresjepie1887 Жыл бұрын

WOW.. as badly broken as Heng Long tanks often were about 15 years ago... It looks like someone dropped/threw it several meters. Shame, though, that Heng Long doesn't make an M60 yet. PS. Fixing the pivots should be done with a hard epoxy, like Stabilit Express. Clean it, scruff the surface for a bit and stick it together. Epoxy weld meant for metal works too on that nylon-like material. With just glue, it'll snap again if something hits the barrel.

@OliversAviationvideo Жыл бұрын

Thats alot of work, id have hoped the supplier would replace something clearly damaged in transit

@RCKickschannel Жыл бұрын

Talking with them now.

@bobaddonizio9476 6 ай бұрын

Great job getting it going. I don't know why everyone dumps on heng long. I own 12 and not one issue on any of them. Everything works great. Guess I'm lucky.

@RCKickschannel 6 ай бұрын

This is not Heng Long

@bobaddonizio9476 6 ай бұрын

I know I was referring to some of the comments.

@RCKickschannel 6 ай бұрын

@@bobaddonizio9476OK got you 👍🏻👍🏻

@lo2713 Жыл бұрын

You have to impressed with what you get for your money, bot so with the state it arrived in, guess the delivery of it wasnt smooth 🤔

@AMAZINGRC Жыл бұрын

Ok, so you fixed it and that's really great... But how was so much wrong to begin with.?! EVERYTHING was wrong with it.!! Excellent fixing it though. 😊

@jasonwilliams74 Жыл бұрын

Man they should have to pay you for that pile of rubbish. That’s ridiculous. Great work fixing it up

@jamesdash1906 Жыл бұрын

I wouldn't waste my time fixing it !!!!! I have 2 Hong Nor tanks and have no problems

@derekblake9385 Жыл бұрын

Use some epoxy resin to glue the turret buddy

@benjamincranch6931 Жыл бұрын

Tanks are fun ! Wish I still had mine. I think there’s an issue with BB firing in Australia mine was permanently disabled 😢and I don’t think you can buy the BB’s still a lot of fun anyway.

@RCKickschannel Жыл бұрын

Yep. I would love a full metal tank, now that looks cool

@aut0bahn Жыл бұрын

What a mess! Safe to say the manufacturer doesn’t have a quality control process? How can there be that many issues? You should make a bullet list of all the things that were broke and send it to the seller and post it in the comments. Damn.

@RCKickschannel Жыл бұрын

I have passed on all the information and this video link to the manufacturer so hopefully this will help them with making a few changes.

@normandixon4571 Жыл бұрын

i got the m60 magach 3 version and I have the same breaks as this 1 so quality control id say or just bad plastic

@garyrafferty8653 Жыл бұрын

It's very similar to the heng long entry level tanks. The electronics suspiciously similar. That is pretty trashed. Because they are plastic they bounce around, when they are fitted with metal parts they drive far more realisticly rather than a racing car when all plastic. Still plenty of fun if you're not worried about that. I've just started building a 1/6 Armortek pretty much like the real thing.

@helenmailey7123 Жыл бұрын

show off !

@garyrafferty8653 Жыл бұрын

@Helen Mailey it's taken me Almost 20 years to be in a position to get one, sorry if it comes across as being a show off.

@helenmailey7123 Жыл бұрын

@@garyrafferty8653 made down the road from me , too pricey tho.

@cliffcampbell8827 Жыл бұрын

Someone was new to the production line, made a few mistakes, didn't tell anybody, boxed your tank up and shipped it off.

@taskforce3833 7 ай бұрын

when i got my M60 it was a flipping mess, broken cables, everything inside loose, several functions would not work and then the suspension started falling apart, so they offered me new plastic suspension arms but i had to pay shipping... i ended up buying the metal tracks/wheels/suspension arms but have already made it very clear that i will never buy a Tong-de tank again, the quality control is a joke, the material strength is way below requirements and you pay premium price for a tank without bearings, plastic gearboxes and basically no customer support unless you want to pay for it.

@alphawlff Жыл бұрын

It is common to get broken things from Banggood

@he214abc 11 ай бұрын

thx for reviewing , i wont consider this brand anymore.

@vincenthawke3049 Жыл бұрын

I've never heard of that manufacturer. Heng long are better made, removable 7.2 V stick pack easily upgradable and much more models and colour options in their range..

@Luke-en2tk Жыл бұрын

Heng Long are same sort of money, some are actually cheaper depending on spec but they are better quality than this probably because they have been doing it for a while

@tm5123 Жыл бұрын

Buy cheap, get cheap. 😂

@bigyin.7710 Жыл бұрын

The damage to that tank can't have just happened in transit. For all those components to be loose and every bullet connector separated, to me, someone has already been in there. I've got a Heng Long Tiger 1, with metal tracks, gearbox and drive sprockets and has most of the features as yours, except the smoke, and cost less than half the price. Glad you did this video, I won't be buying that product.

@bowi73 Жыл бұрын

i have a heng-long 1:16 m1 tank rtr same price olso from china , works perfeckt and is bid stronger and robust

@melvingreene7936 10 ай бұрын

They need to pay u for your labor and send you a new tank

@Mrtrc33 Жыл бұрын

Wow did they play football with box 🤬

@brucelevall2925 Жыл бұрын

What about replacement parts for it are they available for it

@RCKickschannel Жыл бұрын

Some yes as well as upgrades. I haven’t been able to find the gun support part but I’m talking with the supplier

@dangrady2938 Жыл бұрын

how does the smoke work

@RCKickschannel Жыл бұрын

I think it's a little motor with a fan that flows air across some substance that also has some voltage directed onto it. I'm guessing as I didn't dismantle the unit yet but it looks something like that.

@websitesthatneedanem Жыл бұрын

Your Best review of the year! ... so far anyway! 😁

@RyanSantos-cn5ij Жыл бұрын

I bet thats more expensive than Henglong.

@pendragon640 Жыл бұрын

Try heng long tanks

@PieAndChips Жыл бұрын

Thats awful mate. Epoxy a length of aluminium tube over the pivot for the main gun, it'll add a lot of strength.

@diamond66ist Жыл бұрын

Bin it !

@louisrodriguez6499 Жыл бұрын

Damn this is worse than Heng Long qc. I have a heng long sherman and the only thing that doesn't work is the smoke, other than that it's great. I really want a M48 patton rc tank though but don't know if anyone makes one

@RCKickschannel Жыл бұрын

I really want a full metal tank, that would be cool

@ClickClacksRcs Жыл бұрын

😮😢

@maxpaul11 Жыл бұрын

I bet that kit was handled very poorly during shipping! Also looks like some of the electronics are loosely placed. So during shipping loose parts inside damaged things! Who knows? You fixed it and now super cool! awesome video!

@kevinjhonson5925 Жыл бұрын

I always wanted a quality rc tank but they cost way to much

@RCKickschannel Жыл бұрын

Yep, loads

@chrisprice6405 Жыл бұрын

Shame about that Gavin, love rc tanks! I got a sherman , then added stuff based a bit from Film ...Fury.👍🏻 Sherman tank M4A3 heng long ,with more added detail and some weathering / Chris price kzfaq.info/get/bejne/Zrqhi7BnmbaVeok.html Sherman tank M4A3..heng long... lights and sounds / Chris price kzfaq.info/get/bejne/mL5iqMhq08eadqM.html

@soma_rc Жыл бұрын

What a disaster 😢

@jefftroxell4923 Жыл бұрын

That was a certified rats nest of wires in the belly of that beast. Nice looking tank, just piss poor quality.

@RCKickschannel Жыл бұрын

Inside needs some work for sure but it can be improved

@Pablo668 Жыл бұрын

That's a fail. Accidents in transit notwhitstanding. You were awfully restrained.

@insiainutorrt259 Жыл бұрын

Insides epecialy but overall quality of rc tanks looks quite bad on most ive seen thats why ive not got one... its not that complicated a design for an rc... cant justify those prices to me...

@smellurfingerrcdejesus9176 Жыл бұрын

😊 talk about tickling the fancy imma call you miss Nancy you fancy guy sounds like my life how I feel a junk old 🗝️ hey good thing I paid attention hey Gavin fix everything supposed to be

@hardyotremba9153 10 ай бұрын

So schön wie das Modell ist, aber solcher Schrott dürfte nicht in den kommen !!!!☹😖☹😖☹😖

@yodadarksideGreenHawksRC Жыл бұрын

Made in China Gavin?!! 🤔

@RCKickschannel Жыл бұрын

Loads of great stuff is made in China. That’s too broad a statement these days. You can get amazing stuff and total junk. Just look at the Cougar carbon chassis that I just received from China, that’s amazing quality.

@yodadarksideGreenHawksRC Жыл бұрын

@@RCKickschannel Fair point mate..... And well done for fixing her up anyway, made an enjoyable video to. Great job! 👍 👍 👍