Shaft of the Havey Stone Crusher is Stuck into Hammer || We Repair in Very Strange Way |Bearing Size

Рет қаралды 8,471,852

Жыл бұрын

Shaft of the Havey Stone Crusher is Stuck into Hammer || We repair in very strange way |Bearing size
On manual lathe , boring process on local workshop ,
#stonecrushershaft #bearingsize #cuttingedge #machinist #machineshop #pakistanitruck #amazingtechnology #manufacturing

Пікірлер: 1 900

@RetroDeltaDave 8 ай бұрын

Hats off to all of the men involved, if ever there was a film to show people about not giving up, no matter how much effort you need to put in to complete a task, this is it.

@batman1169 Ай бұрын

This job in North America would not exist. They would complain about job not available for women, LGTBAlphabet soup people. 😂

@batman1169 Ай бұрын

This job in North America would not exist. They would complain about job not available for women, LGTBAlphabet soup people. 😂

@jamesrobertson9597 Ай бұрын

When people's labor and safety have virtually no value, it makes sense to do things this way, i guess.

@andimakai6739 5 күн бұрын

Embri érték,nem számit? Csak Dolgoz? Szörnyu ahogy dolgoznnak.❤❤❤

@jlloyd423 11 ай бұрын

Never give up, never give up, never give up. Kudos to these hard working men. Total respect!

@brenohighland1168 8 ай бұрын

agreed

@user-zd4jx4tg9d Ай бұрын

agreed, these dudes are like, I may not get this axel off in my own lifetime but ...my children or grandchildren will certainly finish the job

@ActiveJoe 7 ай бұрын

As someone watching from the US • Watching your videos is most relaxing even at 2 x speed. Hope your community appreciates this very important and risky job • It’s good to see how well these workers are able to use whats available to get the job done • Hope that everyone stays safe and starts thinking more about using safety equipment (gloves / goggles / steel toe shoes, etc) • Thanks so very much for posting and sharing! All the best and God Bless. 🙏❤🇺🇸

@ak_g7117 6 ай бұрын

Based on the background this is somewhere in northern pakistan, in all of which workplace safety or management is non existent, no proper qualifications are needed for such positions by law, its a divine miracle how these places keep going and are in buisness

@user-wl8kh4ov9k 6 ай бұрын

try dreamscape 009 in the background thank me later

@annoyingbstard9407 5 ай бұрын

Cheaper to get another worker than pay for gloves.

@schizy 5 ай бұрын

Steel toed open sandals are in early development.

@WarsiTV Ай бұрын

Unbelievable these guys are doing really really hard work. We need to apprciate them

@andrewgruzdev9631 9 ай бұрын

Обожаю этих чуваков. ))) Всё проварили, отфрезеровали. Отмыли... Потом опять всё в песок и с песком запихивают. Я даже не говорю про затраченное время. Но, через неделю работы этой штуковины, у парней опять появится работа и всё по новой. 😀

@user-sw7rw4os9t 9 ай бұрын

А-ХА-ХА

@bokundagaue5035 9 ай бұрын

я на 47:34 чуть не кончил. когда свежесваренная шпонка забилась в паз.

@_Michael_737 9 ай бұрын

Сумрачный арабский гений😮😉

@paulmontand8364 9 ай бұрын

Штож. Чисто, красиво. Всё по технологии ))))

@user-ir4yf8ci8e 9 ай бұрын

@@_Michael_737 Пакистанский😉

@madbiker1989 Жыл бұрын

Я думал они щас не смогут выбить вторую сторону и тупо с самолета скинут эту ось)))))))))

@user-si8bi6ns3o Жыл бұрын

у них нету съемников а самолёт появился , ну ты сказанул

@user-oz4sg7tw1j Жыл бұрын

шпонка умилила своей точностью. Люфта не будет 105 пудов - ведь кувалдой забили. Не показывайте этот ролик армянам в автосервисах работающих. Умоляю не надо.

@buritos72 Жыл бұрын

@@user-oz4sg7tw1j а мы уже посмотрели 🤣🤣🤣🤣🤝👍🔥

@SCANIA730 Жыл бұрын

@@user-oz4sg7tw1j на шпонке во как крепко держалось, пока резаком её не срезали🤣🤣🤣

@user-uz1yx4wb2t Жыл бұрын

Вот, что такое практика, и Образование 😀. А сколько человек было задействовано из-за Клина 🤣😂. Хотя может просто видос специально , но лица у всех серьезные 😂....

@richardmessenger9474 Жыл бұрын

Fantastic old school skills...greatest respect to them...

@wq6737 9 ай бұрын

Das sind noch Handwerker, mit Leib und Seele ! Solche Leute fehlen uns !!

@Oddl1 Ай бұрын

Du bist sicher kein Handwerker...

@ipadize 21 күн бұрын

so wie die arbeiten würde ich die nicht als Kollegen haben wollen.

@Improveng1 9 ай бұрын

Full credit to these guys for doing fantastic repairs in appalling working conditions.

@WhiskeyGulf71 9 ай бұрын

The conditions are what they made for themselves, if you want better surroundings then you have to make them better.

@off2u4ea99 Ай бұрын

Is there a reason these people don't have real shoes?

@user-kb7ij6ye8u Ай бұрын

@@off2u4ea99 LMAO they all got smart phones, but somehow just cant bother to get proper work boots.

@brentbarnhart5827 21 күн бұрын

What is wrong with the working conditions? Where, and how else would you do this type of work? Even in the USA. It's down, dirty, brute force type of work.

@mikekahotea8148 15 күн бұрын

@brentbarnhart5827 yup I still do this kind of work . In ice stormy weather , burning heat . Yup miss this kinda farm work on machinary . Was brought up that way 50+ yrs ago . Now a days young people are into computer's ... still learning about those

@darklordojeda Жыл бұрын

Safety inspector: "Are those sandals?" Machine Repair Man: "Yes, but I have steel toes."

@timothygeiger8271 11 ай бұрын

They don't believe in safety! They believe since some of them have been doing those jobs for 30+ years, they don't need to worry about accidents

@scowell 11 ай бұрын

Actually I've seen worse... I saw real boots on some. Didn't notice any flip-flops.

@1stFlyingeagle 10 ай бұрын

Sir, don't you know a pair of safety sandals when you see them. Lmao. Did you notice all the workers had all their fingers, Just amazing.

@gordhardy7138 10 ай бұрын

@@scowell😊😊😊😊

@mcspikes1 9 ай бұрын

They’re actually wearing the new OSHA approved open toed safety sandals.

@Sarbet888 10 ай бұрын

Very labor-intensive work; I got tired just watching these guys. You earned every penny for the job!

@KingCoCo 10 ай бұрын

Literally 20c a day

@redneckjones4182 7 ай бұрын

@@KingCoCo How do you know that it is just 20 cents a day?

@JonathanGillies 6 ай бұрын

They'll probably have made about $6000 on this upload alone, regardless of what they earn from their employer.

@bluephoenix8470 Ай бұрын

These guys are the real deal! This is real man's work. These guys aren't working in a nice air conditioned office with a lot snacks and Zoom meetings. Bravo.

@deardrhello4191 8 ай бұрын

First of all, I want to give all my respect and salute to these hard-working men out there for going through battles and war in our daily lives doing for their families and the world...... This is the reason we don't need any more Wars around the world. This is what we needed the MOST in our lives, peoples with skills and help extended ancestor knowledge to passing on to the new generation over and over.

@leecowell8165 Ай бұрын

Yeah well they were hiding Bin Laden for a dozen years. however these guys probably did not know that.

@shafluky Жыл бұрын

I have deep respect for these hard working men ( May Allah bless you Brothers)

@WiseOwl_1408 2 ай бұрын

Moe married a child. World knows it. World thinks little of you because of it.

@PD-uc5st 11 ай бұрын

I am full of admiration for their determination and commitment. BUT the safety. Is non-existent. Thier blind faith amazing. Loved the video.

@bcom9389 20 күн бұрын

What a great video! I love how they never gave up and the 100yo technology they were using to get things done! It's hard to find men that have to work hard like this anymore in America unless they're on an oil rig or pouring cement for construction. Our technology and safety standards have made us lazy and we are forgetting how easy we have it now because of it. Good work guys! Thumbs up from America👍🇺🇸

@michaelrutledge7048 7 ай бұрын

This was bordering on the hilarious! Like watching an episode of the Keystone Kops. But,, in the end they got the job done... using what seemed to be stone knives and axes!!

@honestspirit56 Жыл бұрын

Wow…..and I thought my week was hard. May God bless these people with health and safety while earning their living. I’m humbled…..

@abrantessemeador 10 ай бұрын

I am truly amazed by the professionalism of these Men, without any modern tool to help them be faster and more accurate, they manage to masterfully perform any type of work. You have my respect and admiration, my fraternal hug directly from Brazil!!

@ElectricalExistence 10 ай бұрын

lol what are you talking about? all those tools were modern, just the wrong tools for the job lol. this is what a nation of 80 average iq people looks like.

@Myxa-caH 9 ай бұрын

Смотрел как художественный фильм. Спасибо сценаристу и режиссеру.

@cherrypicker8897 5 ай бұрын

In heavy engineering it's about getting the job done. They succeeded and did a great job with antiquated equipment. In the UK we would have to go back over a 100 years and more and we would probably have far better equipment even then. These guys work very hard, probably just scratching a living. To be admired. Great work.

@cessealbeach 11 ай бұрын

I am an Industrial Engineer in USA, I dont know where to Start..Much Respect for these men, Please stay Safe

@user-pl5in9qc6q Жыл бұрын

Ей богу, не перестаю удивляться их самоотверженности и трудолюбию

@rjyjgkby Жыл бұрын

У нас на заводе тоже БШД есть такая же херня со сборкой закалебешся выбивать

@user-lg9dc3cc2d Жыл бұрын

И техника безопасности на уравнение транснефть отдыхает

@VovkaVolk Жыл бұрын

я бы сказал беднота и безвыходность 🤣

@user-st7cr2tt4w Жыл бұрын

Эту нацию не победить.

@krasngorec73 11 ай бұрын

передай привет инкам

@billtodd6509 8 ай бұрын

Outstanding results on an impossible job. You men are to be commended. Hello from Arkansas in the USA. Be well, my fellow workers. Bill

@DUNCECAPCHILLITO 10 ай бұрын

I wish people here in the us had that much determination and work ethics. The stuff these people do with less is amazing....

@warrenjones744 Жыл бұрын

Repair in a strange way does not even begin to describe what I just saw!

@megatabdulhalim7760 Жыл бұрын

Work which flying sand !

@wasdaletimelapse7658 Жыл бұрын

12 out of 10 for perseverance! You have to imagine that assembly must cost a whole lot of money and be as rare as hens teeth for them to spend so much time and effort to repair it. There is no stopping these guys, well done.

@danhard8440 Жыл бұрын

a little planned maintenance would have went a long way to prevent this issue

@premsuryawanshi5461 Жыл бұрын

@@danhard8440 and

@indiecritic3164 Жыл бұрын

i never thought of the rarity factor! good observation.

@gordonwelcher9598 11 ай бұрын

The repaired assembly will not last as long as it should unless proper lubrication and cleaning is performed.

@mightandbelightnr2290 10 ай бұрын

Or 12 out of 10 in perverty.

@JH-ws6lr 7 ай бұрын

THAT SHAFT WENT ON A JOURNEY ONLY SOME COULD EVER DREAM OF.

@jaymacgee_A_Bawbag_Blethering 10 ай бұрын

Sometimes you gotta stand back in awe and just respect the fk outta what these guys are doing without the right tools but getting the same results with brute strength and ingenuity … total respect ✊ 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@GrantJohnston-dr9rt 10 ай бұрын

And in barefeet!

@jaymacgee_A_Bawbag_Blethering 10 ай бұрын

@@GrantJohnston-dr9rt somewhere in that city there’s a bullet ridden health and safety at work supervisors body stuffed in the boot of his car …👀 It’s pure old school “ fk it let’s just get this done by any means “ and I for one can only admire that Can Do attitude 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@The_DuMont_Network 9 ай бұрын

Brute strength perhaps. But a total ignorance of Newton's Law. Physics can be a bitch.

@jaymacgee_A_Bawbag_Blethering 9 ай бұрын

@@The_DuMont_Network that reply of yours tells me you n I just wouldn’t get along , your one of those glass half empty guys .. pffff, why do you exist ? Beyond me 👍🏴󠁧󠁢󠁳󠁣󠁴󠁿

@wrongfullyaccused7139 9 ай бұрын

They do NOT get the same results as a fully trained and equipped machine shop.

@sabhig Жыл бұрын

They are my Pakistani hardworking brothers and they do this hard work every day for living Masallah

@nikolaiturva 10 ай бұрын

Amazing! What are they get payd by month?

@sabhig 10 ай бұрын

@@nikolaiturva well 10000.00 PKR which is equal to 35 USD

@jamestew5075 3 ай бұрын

Full credit to the chipmunks

@user-uz1yx4wb2t Жыл бұрын

Добра. Вы же ребята клин не вытащили 😂! Нужно было просверлить его если он сломался 😅 Дааа знания , практика это Всё ! ! ! Лайк за труды ✊ .

@k1rundel Жыл бұрын

Да у них такая закись что и клин приклеился. Не могут же они быть настолько несведущими.

@r0id465 11 ай бұрын

Это не клин, это шпонка, втулка на которой колесо сидело сгнило и заблокировало посадку.

@JawwadHafeez Ай бұрын

These are the men who built Pyramids of Egypt. Still using the same tools.

@Bucephalus84 25 күн бұрын

No they aren't.

@Sobitiya_ 9 ай бұрын

6:50 когда ударил по рукам😂 дальше клещами стал держать😂😂😂

@joegomes1352 Жыл бұрын

U guys are very skillful and creative with limited tools,I've already used techniques I got from watching, thanks

@barryrollins2728 Жыл бұрын

Such blows these men are giving this shaft it's really hard to see why it won't separate! All these processes are a credit to determination! North Carolina USA

@elNenio Жыл бұрын

Yes they give a deep blow on that shaft.. must be really thirsty after all that hard work..

@supersabrosinho Жыл бұрын

Tf was that sign off about? "North Carolina USA" ok there Mr reporter

@pavelmanzhikov4131 11 ай бұрын

В России это могут отремонтировать при минус 40

@pavelmanzhikov4131 11 ай бұрын

Зря вы на Украину полезли

@nikjames2965 10 ай бұрын

None of these deadly processes would be necessary if the factory owners gave a stuff for their workers

@user-sg6eo8jc5l 8 ай бұрын

Великая слава таким людям, людям труда!!!! 💪🙏обратите внимание, у них нет никаких защитных средств, такие люди презирают смерть и плюют ей в лицн

@mikec3260 9 ай бұрын

Workmanship at its finest. I appreciate those who work hard, these gentlemen crushed it. It did not look easy, I am guessing that thing has been refurbished a few times. Subbed!

@Giitzerland 9 ай бұрын

I'm going to assume you're being sarcastic, know these guys, or you're blind.

@renetr6771 Жыл бұрын

My mechanic heart makes a jump always when i see u using a steel hammer on bearings and bearing rolls. Otherwise, u did a great job, and it was unbelievable how hard this shaft was stucking.

@user-oz4sg7tw1j Жыл бұрын

И это только часть машинки допотопной цивилизации. Представляю как бы разбирали линкоры 1 мировой войны в японии. А ещё самый смешной вопрос в голове у меня - а откуда они там взялись и кто их собирал ? Там калибр стволов только больше 700 мм. Плавку и токарку столь массивного и легированного ствола люди в лаптях и с самурайскими мечами сделать не могли.

@leonptr Жыл бұрын

Yeah. I'm betting it was too big when it was originally assembled and they thought, fuck it, we'll MAKE it fit.

@renetr6771 Жыл бұрын

@@leonptr Something like this, or..maybe, in pakistan (??) they have found the strongest metal glue ever.

@gordonwelcher9598 11 ай бұрын

The repaired assembly will not last as long as it should unless proper lubrication and cleaning is performed.

@Hengst. Жыл бұрын

Переживал за ребят больше чем за свою личную жизнь! Съёмник Hitachi даже не помог!

@DiscoveringSkills Жыл бұрын

Thanks

@gopnik2394 Жыл бұрын

Там где станки ставят даже крыши нету .!!!! Мне тоже этот канал нравится .!!!!

@user-yh6dr9jn4x Жыл бұрын

@@gopnik2394 Дождей нет

@user-yh6dr9jn4x Жыл бұрын

Это еванестическая операция должна попасть в учебники ☝️

@me_xd6815 Жыл бұрын

@@user-yh6dr9jn4x там вал соржавел пока собирали...

@ahmedaalmaryme942 Ай бұрын

Pakistanis are strong and tough, they reform and work miracles. Greetings from Libya 🇱🇾🎉🎉

@PeteThecurious100 9 ай бұрын

I love hard work... I can watch it all day. ;) Not held back by Health & Safety. She was a piece of art that ute.

@jn1lfd 11 ай бұрын

I was blown away by the fact that the work was already too sloppy in so many ways. The workpiece was hit against the core-press machine as hard as possible, and the slinging was super sloppy. The shaft was pulled out with a rock drill without fixing the workpiece, and the ground was sand for handling bearings. There are plenty of other things to be picky about. What is safety awareness? (LOL)

@sonnyjs15 5 ай бұрын

Go fly a kite

@Endoplasmic-Reticulum 9 ай бұрын

In case anyone was wondering, the efforts boiled down to saving and repairing the non concentric shaft which is extremely difficult to make let alone replace. The 1/3 decimeter offset is what leverages the crushing plate.

@orangmakan 9 ай бұрын

@24:44 i doubt that they reach that goal, then

@chiro-quack-tor2108 9 ай бұрын

My cousin elon has a gigapress just down the street maybe that would do it.

@adamromanak7605 9 ай бұрын

@@orangmakan 37:24 - 42:13 they did pretty well considering what they have.

@1Patient 9 ай бұрын

I was thinking when I seen that 🤔that's odd, did they mess up the machine work. I also found it humorous when they used a piece of power equipment to load the shaft into the housing but used the block and tackle to bring it over to the lathe, lift it up onto the lathe etc.. That's a lot of man hrs servicing that stone crusher,

@rbtgmnstcs 8 ай бұрын

Did anyone notice any change of condition for the flywheel, before and after the repair? Let's at least say that they destroyed it and did a very sloppy repair job? What if someone got the idea of using inserted hydraulic oil pressure into the flywheel hub? Simply drill a hole in to the shaft and put a hydraulic fitting on the hub, pump, pull and voila, bobs your uncle and so on!

@peterbogner1675 8 ай бұрын

Biggest respect to these very hard working men.

@richwaight 10 ай бұрын

Love this! Really well edited together!

@supersabrosinho Жыл бұрын

This video was amazing to watch. Very hard-working men,Thank you!

@kostass.4941 Жыл бұрын

В этом видео наглядно продемонстрировали все возможные и не возможные способы выпресовки и творческую смекалку :-)) рабочих.

@frtp3691 10 ай бұрын

возня с гидромолотом...простой кусок трубы не додумались поставить

@user-ul7qd4ev9s 10 ай бұрын

Они быстрее бы сдали эту херню в металлолом, и выточили новую в соседнем дворе

@jrbaeronz9840 9 ай бұрын

That drive pulley needed serious rebuilding as well,- going to chew through belts. They really butchered the rim getting it off. Big job but they got it done in the end. Could do with a giant press for this work. Not a good idea to hammer expensive bearings directly, could have made a frame and jacked them in.

@bradbergman3673 Ай бұрын

Yes, I couldn't believe it when they started pounding on the edge of the pulley. I would have been fired for that.

@jonathandcc23 2 күн бұрын

i was looking for this comment honestly. i wonder if its possible to remachine the pulley or maybe they need a new one 🙄

@reioXyhi 9 ай бұрын

Not our western style to " buy a new one " 100% respect from 🇫🇮👍

@johncamp7679 11 ай бұрын

Years ago, I watched a similar video. One that was in a different country. And, I made the typical comment about safety. Since, then I have been to different countries and became more enlightened. Just enjoy the work, the ability to adapt and overcome. They have been doing this far longer than you have been listening to your safety guy.

@bama1ama 10 ай бұрын

Completely disagree with you! Safety regulations are written in the blood of workers! And we have no right not to pay attention to this! The fact that these poor fellows are still alive is nothing but very strong luck!

@Den-ml7zg 10 ай бұрын

@@bama1ama Safety, we dont need no stinkin safety!

@bama1ama 10 ай бұрын

@@Den-ml7zg I am an atheist, but I will go to light a candle in the nearest church for your health🤣🤣🤣

@nikjames2965 10 ай бұрын

@@bama1ama These deadly working conditions are a product of a nation that doesn't give a damn about the ordinary working guy. That workshop needs a bulldozer driving through it - with the management underneath it.

@manikpanday9540 9 ай бұрын

😅😅😅😅

@ar1701 10 ай бұрын

Chief engineer comes to diagnose a particularly. difficult job an says to his team "Well boys time ta get out the big hammer " and walks away hour later the job is done!!!! seriously! these guys are my heroes !!

@nikjames2965 10 ай бұрын

They should down tools and picket the gate

@armandofrancogarcia1217 9 ай бұрын

Buenas noches, excelente trabajo, ingenio y esfuerzo. ¡Cuando se quiere, se puede! Felicidades.

@ratanlalbirha9335 7 ай бұрын

LAZAWAB,,👍👍 BAHUT KHOOB,👍👆

@WilyTuber Жыл бұрын

Where there's a will there's a way even under primitive circumstances. Amazing.

@dimajulyabin3482 Жыл бұрын

Молодцы,терпение и труд все перетрут. О чего интересно этот механизм? Титанический труд.

@DiscoveringSkills Жыл бұрын

Thanks 🙏

@user-dh4bz4ek4h Жыл бұрын

Камнедробилка

@maxim_kh Жыл бұрын

Для такой дробилки kzfaq.info/get/bejne/nrZgpNCcnsqWm4U.html Вал с эксцентриком, на видео это хорошо видно.

@ng_bn Ай бұрын

Those are balls of steel... 💯

@haraldpettersen3649 Жыл бұрын

It's amazing that they can do what they do with the equipment they have at their disposal.

@wthorwirth Жыл бұрын

It's more amazing that they could do with the equipment they would have at disposal... hydraulic press? manpower is much more cheaper for the boss...

@grzegorzgnich5213 11 ай бұрын

Tylko tyle mają, plus chęci do pracy...

@haraldpettersen3649 11 ай бұрын

@@grzegorzgnich5213 - That`s tru 👍

@sirlayorn7355 Жыл бұрын

Дед бил-бил - не разбил. Бабка колотила-колотила - не расколотила… Мимо экскаватор "Кировец" пробегал, ковшиком махнул - и все дела ;)

@matthewt88 Ай бұрын

Red Loctite.

@tomdonnell814 9 ай бұрын

Once again, the age old adage applies- "Necessity is the mother of invention." Kudos guys! GREAT WORK"

@CON10NDOR 6 ай бұрын

WHO IN THIS FIELD OF WORK USES "KUDOS". KINDA GAY DON'T YOU THINK ?

@serenidadypaciencia 11 ай бұрын

I will never ever complain about the bearings in my GMC truck being hard to replace.....

@MsBuba2009 Жыл бұрын

просто молодцы!!!!!! это огромный адский труд!!!!!!!! Постине халялные заработанные деньги !!!!!!!!!!

@rjyjgkby Жыл бұрын

У нас на заводе такая же стоит но так её не запускаем до такой степени но тоже все через резак 😃

@ericolivomartinez3674 9 ай бұрын

estos son trabajo que no tienen precio y estos laboriosos hombres son admirable ojalá y tengan muchos seguidores que se dediquen a realizarlo

@user-hi3bw3nv7x 6 ай бұрын

this is best Pakistani suspense movie 🍿 i ever seen 😎

@uttaradit2 11 ай бұрын

6 months working with these guys and you return home and YOU CAN do ANYTHING !!!

@hugoplaceres 10 ай бұрын

only with a torch and a big hammer

@Someguy6571 10 ай бұрын

Anything that doesn’t need hands, feet, fingers or toes.

@wirefeed3419 9 ай бұрын

The basic need of getting something done, over looking the many employment standards and safety issues it is a great display of if there is a need there is a way. Interesting to watch an almost Ant like work force, everyone works and all ages, when someone tires or more strength is needed someone steps in without being asked and no anger, resentment or frustration.

@andrslnks4804 9 ай бұрын

Yes, making a camshaft from a axle

@kimienick6721 Ай бұрын

Huh? On my 15 I handle two quarry building in same times, all workers not big talk and alot not UNDERSTAND what they do... I think only my KNOW HOW IT'S WORKING PERFECTLY🤣🤣😅 two became LEADER here you must have B4 from level 7-10, Troubleshooting skills, driving (operator) heavy machinery, OVERHAUL heavy machinery, WELDING and CUTTING, and maintenance ALL from A to the Z quarry system... and the most important is Quality product from quarry must qualify for HOUSING, BUILDING, ROAD and CONSTRUCTION INDUSTRY... so I tell you how much SALARY YOU CAN ME IF YOU WANNA ME BE YOUR MEGA QUARRY ROUND DEPARTMENT CHARGER&CHARGEMAN😝😝😝😝😝

@peterparsons7141 Жыл бұрын

I understand that you guys do this often. However friction fitting like this, the two pieces are one. The pulley needs to be 100+, shaft cooler. But it was a fantastic vid.

@gabrielalvarez329 2 ай бұрын

Cierto con baja temperatura también es posible

@rmaltbie1 10 ай бұрын

Really liking the ornamentation on the loaders. Hmm, guess they didn’t use anti seize on install 200 years ago😂. Great video. And again the OSHA approved protective gear is spot on. God blessem.

@user-ud7fo8no8l 9 ай бұрын

Didnt see them apply antiseize this time either😂😂😂

@SergeyPRKL 9 ай бұрын

Probably they haven't heard about your god.

@firethorn9799 8 ай бұрын

@SergeyPRKL By golly, I had to get the thing off, my grandchild should have to too!😈

@JonathanGillies 6 ай бұрын

@@SergeyPRKL They sure will have........

@johnhenrick2298 9 ай бұрын

Those guys were very resourceful, and had to work with such antiquated machinery. Great job! The endless chain hoist reminded me of my first job, sixty-two years ago, in a country machine shop in the UK. At lunchtime I removed my work boots and put on my shoes to go to lunch. When I got back, someone had hooked my boots to the hoist and raised them up sixteen feet in the air. Very funny, for them.

@Gerval 8 ай бұрын

🙈

@user-kh2yl6nn3l 11 ай бұрын

Well, this takes recycling to WHOLE new levels . lol But what it does show is pure DETERMINATION .

@sergey_averyan Жыл бұрын

Весь фильм восхищался невероятному упорству этих людей. Но так и не увидел, для чего это предназначено.

@rjyjgkby Жыл бұрын

БШД-большая щековая дробилка эта подвижная щека у нас на заводе такая же разбирать тоже трудно но не атакой же степени запускать или это из разряда какой мудак подгонял шпону

@maxim_kh Жыл бұрын

Вот такая дробилка kzfaq.info/get/bejne/nrZgpNCcnsqWm4U.html

@100ich5 2 ай бұрын

Das ist ein Steinbrecher.

@emmetmyers 9 ай бұрын

Pressure variance definitely watching the bend in that boring-bar was traumatic to me. Imagine what these guys could do with some proper welders and a shop that wasn't just dirt.

@ghraydon Ай бұрын

I watched the whole thing. It is Inspirational and Educational. The intelligence, ingenuity, hard work, and resolve of this team and their good natured grit put me in the mood to work. You Brothers are the Best.

@derekstocker6661 Жыл бұрын

Heavy engineering at it very best. Well done guys.

@user-xw7lk5hy9q Жыл бұрын

Напомнило эпизод из Острова Сокровищ, где Сквайр Трелони картину вместо окна выбивал.

@sirlayorn7355 Жыл бұрын

Надо было вставить этот эпизод прямо в видео, да)))

@trailblazer1047 10 ай бұрын

Way to go Yeah!! Persaverance always works Outstanding work!!Nothing is to tough for you guys!Your boss owes you all a drink,or diner

@Draxindustries1 9 ай бұрын

Heavy engineering at its very best! Here in the UK any engineering shop wouldn't even want to try, they'd say it was scrap and to 'buy a new one'. Comments by those citing Health & Safety should be ignored , these guys know what they're doing. Great work by very hard working guys❤

@IanLee-cb5tx 7 ай бұрын

Excellent comment could'nt agree more !

@redneckjones4182 7 ай бұрын

Yep, great comment!

@gurjeetsingh3860 6 ай бұрын

🇺🇸 same. We call them fitter not mechanic

@francoisharua9070 11 ай бұрын

J admir tout ce que vous êtes capable de réaliser avec votre cœur et votre savoir-faire respect à vous tous ❤❤❤❤❤❤

@Exnay777 Жыл бұрын

We use heat and dry ice. We also use rosebud heaters in place of the oxygen torches...little surprised they didn't clean the shaft before welding. seen plenty of porosity...but all things being equal they doing what they can...

@michaeldec698 Жыл бұрын

Yup boil bearings in oil and dry ice the shaft..did many 500s powerscreens

@user-yb2qd7hx9l 10 ай бұрын

대단합니다. 49분 영상 하나도 빠짐없이 보게 되네요. 좋은 영상 감사합니다~!

@RossD8 10 ай бұрын

The improvisation and ingenuity alone are simply astounding.

@davkilldav211 Жыл бұрын

When the repairs were actually started, so did my non stop cringing, wow, so many no no's and they did them all. Hard work isn't always smart work...I'm still stunned and trying to grasp what I saw

@mybleachhouse 11 ай бұрын

I was worried for their limbs and fingers so many times haha. This is how it works when the budget for the repair is $34.

@marcelojavierbruno 10 ай бұрын

@@mybleachhouse A lot more only in welding electrodes !!! 😄

@Bert_de_Wit 10 ай бұрын

They are able to do so much with so little. Practical and inventive thinking. Quite impressive.

@gabrielalvarez329 2 ай бұрын

Le echaron bola para sacar esa polea de ese eje ,,aunque lo fuesen sacado rápido si dilataban el material en un horno con mucha leña ,,su constancia y empeño merece un like ..saludos desde Venezuela.

@fikretturkoglu7363 Жыл бұрын

👋👋👋👋👍👍 Allah yardımcınız olsun. zor iş,ancak başarı müthiş.

@petervorobieff6822 8 ай бұрын

14:47 - love the way the load is secured in that pickup truck and it only gets better from there nicely done

@charlesballiet7074 7 ай бұрын

just one pothole from total disaster

@jonwills9160 8 ай бұрын

You are so resourceful - incredible ingenuity!!

@johng8473 Жыл бұрын

HEAT would go a long way to loosen the hub. Of course grease would also be a essential part of putting it back together.

@sammyupload6245 Жыл бұрын

I like when people put in more efforts to make things work.

@manuelrios7991 9 ай бұрын

Muy buenos trabajadores de verdad, los admiro mucho , saludos desde centroamerica, panama 💪💪 🇵🇦🇵🇦🇵🇦.

@screwsnutsandbolts 7 ай бұрын

Excellent skills ! 👍

@sergiosantos4584 Жыл бұрын

GOSTEI DE VER ESSE TRABALHO, INCRÍVEL A EQUIPE AJUDANDO, UM COMANDA E NINGUEM FICA DANDO PIADA ERRADA. UMA CERTEZA ELES TEM, O TRABALHO SERA FEITO. O IMPOSSÍVEL NÃO EXISTE PARA ELES.

@vladi_g Жыл бұрын

Это было эпично. Захватывающие зрелище.

@dougalexander7204 8 ай бұрын

Much respect. I wonder if the crushing and screening plant was down until the primary jaw crusher was repaired?

@jeffreykreft5442 3 ай бұрын

I will never again take for granted the equipment I have here in the states. Watching these guys work on this and all the time thinking we would have this apart in a couple hours with the tools and machines we have here. Much respect for these guys for not giving up, I know everyone here would have thrown in the towel after 1 day!

@ganjalfcreamcorn8438 Ай бұрын

everyone where? in America?

@gharker55 Жыл бұрын

This is the team of guys that work big Ben's hourly chime

@christopherfothergil 2 ай бұрын

I am full of admiration for these guys. We in the UK are bogged down by to many rules regarding health and safety. These lads have to be very careful not to lose fingers toes or eyesight.

@arielramirez5630 8 ай бұрын

Cuanto esfuerzo la verdad me gusto Excelente trabajo

@toendramist Жыл бұрын

And again putting it together without copper/ceramic grease. They never learn.

@darrylmarbut47 Жыл бұрын

Some things I'm sure are hard to come by,they don't have an O'Reilly right around the corner..😆

@darrylmarbut47 Жыл бұрын

They're quit ingenious..

@ZloySok Жыл бұрын

0:15 "Белоснежка и 7 гномов". Наглядное пособие))

@zddmsmify 9 ай бұрын

Que Dios os bendiga por el trabajo

@darryl2460 10 ай бұрын

can anybody give me an estimate of how much a worker like this would make and how much safety glasses and gloves cost in that country. Why aren't they wearing protective gear? A lot of it is made in this part of the world so I would expect it to be somewhat affordable. Shocking that they are allowed to work with heavy steel with sandals on.