I'm impressed! I didn't spot any toes missing! The work is exceptional regarding the primitive conditions through!!! Thumbs up!

My heart is in my mouth when I see work like this being done in sandals. I was helping a work colleague lift a truck crankshaft from a bench into a cradle so it could be put in the cleaning bath. I was an apprentice and he was the mechanic and did not want to go to the other end of the workshop and get the mobile crane. It slipped from his hands and I let go and jumped back but he was not quick enough and it landed on his foot. The steel cap saved his toes but he still had broken bones that took months to heal with several operations needed. It was over a year before he could walk without pain.

You do realize that the O.D is hard chrome plated. Any bending creates micro cracks all along the surface the seals ride on. Also they’re pushing down directly on the shaft with the press ram….I’m sure there’s a nice big divot there now. Leaks, leaks and more leaks….this is a dumpster fire!

We tried to straighten a hydraulic shaft to test a new press we got. We put enough pressure on it so that it was about straight when it broke. Two pieces flew around the shop like shrapnel. How the shaft got bent without it being bent back is something a metal expert would understand, but we could have been killed. That was the end of that. When you are stressing something with that much pressure you have to have all your ducks in a row. Ours were not even in the same pond.

Notice how they covered the eye with a red rag when they put it in the press. This was so you didn't notice they swapped the unit with a good one when it mysteriously changed color after becoming straight. Hey, with 3.4 million views and counting, they're getting paid for the content regardless of what they're actually accomplishing in the shop. Where's Funk FPV when we need him?!?

Это волшебные сандали , без них не чего не получится.

Que liquido fue sumergido y cuanto tiempo?

Fascinating! I know when they taped the ends with yellow tape that they were re-chroming the shaft. What was that process (other than 'electrolytic plating')? It looked like they were dipping it into rocks.

These videos always amaze me. I have to say they look like the most comfortable safety shoes I've ever seen. 👍

I like how they use floor dirt to clean and lubricate sensitive machinery.

Thats what I love about these guys just do whatever they want and get away with it somehow working

Che spettacolo vederli lavorare,dei maestri!

A verdadeira arte da mecânica clássica. 👏👏👏👏🇧🇷🇧🇷🇧🇷🇧🇷

Is that an old fan belt they are using as a lifting strap?

Proof that if it doesn't fit you keep hitting it with a sledgehammer until it does...

I love the oversized wrench and Allen keys to make it work!

First class operation . Not even a slugging wrench that fits . Quality control . Appreciate the flash shield for welder in back ground .

Каждый раз, когда смотрю подобные ролики, меня поражает мастерство и профессионализм таких ребят. Без должного оборудования они умудряются проводить довольно таки сложные ремонты. Молодцы! Наилучшие пожелания из Беларуси!

How did you bend it?

If it is used locally after the repairs it should hold up if it is not perfect it may leak at top cap.

5:00 Да ладно! Оказывается у них в стране есть часовые индикаторы? Я всю жизнь думал, что они проволокой всегда биения измеряют 😮

Superbe travail beaucoup de savoir faire bravo je suis admiratif

C'est incroyable de voir ce qu'il sont capables de faire ils sont très courageux avec peu de moyens beaucoup d'intelligence vraiment bravo

What did they dip it into?

Are they re-hardening the surface with liquid cyanide when they dip it into the tank?

Another good job from We Bodge It And Scarper brothers. Wouldn't like to be near that ram when it bends next time. 😢

Amazing!! Ingenuity of that part of the world where people make do with tools they got and still achieve results like this? Simply Wow!!

This isn’t their first rodeo. Great job!

Aside from the cancer chrome dip, the finish on that rod was pretty nice. So good for them.

Техника безопасности на высшем уровне…..👍

Aqui no Brasil e difícil desempenar uma haste dessa geralmente elas partem ou se quebram parabéns usem um compressor de ar

Well done,, You entertained me for 23.27 minutes 👍👍👍👍👍👍

Good to see they have safety sandals

Dedicated Team work, communications & passion are the key factors... Hats off to you boys.

Yo trabaje hasta. Abril. De este año.023..x que me' jubile. Trabaje.30. Años..asiendo hudraulica. Que trabajo lindo. X su presicion .como van las piezas. Lis repuestos. Sellos. Etc...felisitaciones. x. El vidio. Sigan pasando. Me' encanta. Son muy entretenidos. Y didacticos. Gracias y sigan asi. Gracias. Hasta. Siempre....

How long has it been since they changed the oil in those clothes?

Amazing work! Ive done this myself, but my shaft was bent just a little bit. It took a lot of pressure to bend it back, and it wasnt perfect but good enough and works well. Its just amazing skills what theese guys do here

second nickel coating to make it look as it was replaced, great

Leather seals?

Me encanta ver sus videos son mecánicos de berraquera de maquinaria pesada y muy cumplidos con sus trabajos y todos saben lo que hacen felicitaciones un fuerte abrazo y un lak

oi,gostaria que vocês acompanhasse o equipamento até o destino final,ou seja sua montagem na máquina, e ele funcionando sem vazamentos.. obrigado,eu amo meu Brasil.

This is ONE(1) REPAIR YOU WILL NEVER SEE DONE AT C.E.E IN AUSTRAILA

Amazing work 👏👏❤😊😊

Everything in these shops comes out with a nice coating of break-in dirt to insure plenty of running clearance.

7:10 that's the same tape my ali express packager is using extensively.

Здорово. Молодцы!🎉❤

I love the sandals and dirt floor so dank

En el momento ponen la barra en la prensa ponen un trapo rojo, el ojo de la barra no es mismo quitan el trapo. El video entretiene 100% no pelien si esta buena o no la reparacion.

I like how they clean the tube like a baby😊

How long dose it take to rebuild one of those? Nice work. I learned a couple new tricks from this.

Complimenti ragazzi siete bravissimi onore a voi 💪💪💪💪👏👏👏👏🇮🇹🇮🇹🇮🇹

Are they steel toe capped sandals

There not just mechanics but magicians too haha they completely changed the cylinder

No pude dejar de verlo hasta que terminó. No se porqué me llaman tanto la atención éste tipo de videos Y me parece un buen ambiente laboral algo así como agradable.

When Churka works, it’s so nice to watch!

Another reason to like YT. These guys bust their asses every day for thousands of years with no appreciation. Now, thanks to YT over 2 million people are watching them & giving them compliments. BTW, let's not forget to give them props for wearing sandals to work. I couldn't imagine dropping any of that stuff on my foot wearing steel-toed boots nevermind sandals.

I like to see this work and how long it will last. Hammering on bolts to insert them is never a good sign...

Let .....me........guess........ they overloaded like they do everything else ?

parabéns pelo vídeo, excelente!!!

Скажите ,когда вал погружали в ванну я понял ,что это гальваника ? Хромирование?

This is what they do when they're not trying to scam you on social media.

OK now I understand why we have OSHA… 😂

What is the run out tolerance? .005?

Excelente trabajo 👏👏👍👍

Did the colour of the yoke on that shaft change when it was placed in the press? It looked very different after it was "straightened"...

They take bodging to a new level

How are foot related injuries over there? Are the men super aware of their feet and everything around them or do 30% of them have deformed feet or missing toes?

ADIMIRO MUITO O TRABALHO DESSES PROFISSIONAIS , PARABÉNS 👏🏾👏🏾👏🏾👍🏾👍🏾👍🏾🇧🇷🇧🇷

These guys work hard......💪

What was that tank they dipped it in with the yellow tape? I want to think its a chrome tank but I wasn't seeing any power supply and it was far to shiny when it came out for it to have been freshly chromed.

Trabalho arcaico. Muito strazafo. Deveria ter uma falha elétrica em monovia, ora favilitar a operação

Please stop hitting the casting with the sledge hammer without a protective piece of wood. That sets up a future crack in that critical high stress area. Did they check/clean/measure the bore ?

Все понятно - но что это за вертикальная ванна с какими то щепками ? После такой рихтовке на прессе разве хром на штоке не разрушен ?

Was this filmed in Toronto?

It seems to me it should have been heat treated to prevent this from happening again. It has already been weakened in the spot that it was bent, I have worked with large valves and steel in the ship yards...

A melhor parte foi cortada aos 4:37...

رغم أنه عمل رائع و جبار واحي هؤلاء الرجال على ذلك ، لكن لا اعتقد أن العملية ستنجح إلى حد كبير ،لأن مثل هذه القطع التي تعمل بجهد أكبر إن تعرضت لصدمة بالغة لن تعود مثلما كانت ابدا وستعيد الكرة ثانية ! على كل حال كما يقول المثل الواشك على السقوط يمسك في الأشواك

i dont know about you guys safty gear, it is a bit lacking, but i love that purple caps, it gives some contrast 🙂

I’d like to see if the rod or the seals failed first when it broke down.

What about the flat spots from being in that press?

The cylinder rod is straightened indeed, but it’s metal structure is demolished twice by the overload and the resetting. The metal’s memory will lead to a sudden fatigue’s breakdown.

There is no precision with these guys but they get the job done!!!

Why do they cut the video during the first drop of that hidraulic jack? After that…that rod look different

I have straightened Two ram shafts, but did not pull them apart, that makes work, and the risk of more damage.. A drilling rig support ram, 40mm ram 1.2mtr shaft was easy and done in about an hour, then back onto the rig mast and working fine... . The second was a 60mm dia 1mtr stroke, was not removed, but was straightened useing One of the other rams... Care is needed to be sure to press on the high spot, otherwise you get a corkscrew in the shaft and you can never get that out...cheers from New Zealand ...

The force required to bend a rod like in the first place, that is impressive.

They didn't replace the seals or put hydrolic fluid on any of the seals

Amazing!

If you ever watch crane accidents, this is where they come. Live to tip over another day

The molecules are stretched on one side and compressed on the other. It would have to be reforged to fix it.

The barfoot on the shaft really puts that personal touch on it

Must be soft high tensile steel?

Качественно делают, даж часовой индикатор и микрометр есть. И хромирование сделали даже. Молодцы эти парни👍

если измерять микрометром кривой и прямой штоки, то показания будут одинаковыми. тогда зачем мерить? и вообще, на трещины шток не проверяли, испытаний после сборки не делали. блестит да и ладно😅

Согнутый потом под прессом под давлением равняет и место где прижимает останется мятина и ямки. Просто они ещё восстановили зеркальность и собрали. Это во время работы дасть о себе знать. Масла из выемки будет пропускать и сальники не поможет.

These indian engineers work miracles daily with the least equipment and technology..they are excellent general engineers. They just get the job done and will work 24/7 if they have to

This is a bad idea. The danger this puts on the user of the machine that gets this ram and those around it is astronomical. That rod is ruined. It has fatigued and is useless for the intended purpose. Re-chroming it to make it look new is nothing more than misleading asthetics. The internal crystaline structure of that rod is shot. There was no attempt at even trying to normalize the iron to even attempt to repair the internal damage. That rod is a ticking time bomb. If I was the poor sucker that got sucked into buying that piece as a "refurb", I would be pissed to the max. Proper repair would have been to remove the eye and replace the rod machine a new rod. It's sketchy ass shit like this that gives some shops bad names. Next time it may not just bend but actually break causing catastrophic failure of the machine.

Excellent travailleurs ! Chapeau les gars !

these guys. job security for sure with these repairs

Ez a krómozás valóban kopásálló? :)

Anybody else notice they switch rods in the press? The original bent rod was not the same as the straight one. Notice the different colors of paint on the eye end.