Video 1 of the Seplos Vertical DIY battery build. Case setup and cell installation video.
Пікірлер: 4
@alanslattery595413 күн бұрын
Hi Gary, the 3 battery videos are really good. Can you please share the cost of the Seplos 15 kwh unit? I'm considering adding an off grid system with Solis 6K and 10 -15 kwh batteries. Currently have a grid tied system and cannot expand it any more. Are you aware of many clients in Ireland that have already installed the Seplos battery?
@GaryMeatsFood12 күн бұрын
Hi Alan. As mentioned in the video, the kit was purchased from www.fogstar.co.uk for about €600. It cost me €50 for it to be dropped off in Northern Ireland where I collected from. The battery cells were from www.eu.nkon.nl and the 16 B Grade cells cost a little over €1200 delivered. If you already have the tools and don't need to buy anything else, I would put a round figure of €2,000 on it, because you will ultimately need to spend money on something else. Fogstar sell the Seplos pre-made for about €2,300 (depending on exchange rate) which is not bad when you consider that the WECO 5kWh battery is being sold for €2,000 for a third of the battery capacity. Pylontech have a slightly smaller rack battery for a little under €1,500. It can be a bit daunting building a battery, even with a kit supplied and you do take on the risk of damaging the battery, your inverter, or both, so caution is advised. I have spent hundreds more on tools and materials, but much of these are tools I wanted to buy anyway, such as hydraulic and RJ45 crimps. I needed. I spent a few hundred on wood for cabinets, but I have improved the part of my property the batteries will be located which is now dry and more pleasant to be in. I'll include these side details in the final video. I know DIY batteries are popular here amongst the enthusiasts, but I wouldn't say they are common, including the likes of the Seplos kits. I have a second one ordered which I will be collecting when I drive to Germany later this month. I plan to have a third battery before the end of the year. With the cabinets built, I might even sell the seplos kits and replace them with bare cells, BMS and balancers. Someone will be blessed with a bargain. I may even offer to hook the battery up if they are local enough to me. I'll see how things go. I'm enjoying the ride, challenging as it has been for a newbie.
@user-gz8fd8kl6g10 күн бұрын
Hi Gary. This is Hart from Seplos Technology company. I was browsing KZfaq when I was pushed to your video by chance. Thank you for sharing our company's products. It's a very good vedio! If you have any needs, you can contact me and we can exchange products and share experiences.
@GaryMeatsFood10 күн бұрын
Hello Hart. Thank you for your comment. I am happy to help the solar community, because they helped me. I do have some ideas and suggestions to help reduce the need for customers to reach out to Seplos or a solar forum after purchasing a kit if there is a problem. I also have a couple of practical product suggestions. What is the best email address to reach you directly?