One of the most detailed trailer builds on youtube. Especially the the attachment point. Been looking for ideas like this for a long time but no one seems to explain how the trailers attach. Very well done! 😁

Very nice project. It may have one or two flaws, but for a DIY it is absolutely great. I built a cargo tricycle myself and it has some flaws too, so I know what I'm talking about. Be proud of your achievement, you did what few others have done 👍

I have made two of these 3 years ago it's been very useful and hauled many loads with this. It have well over 1000 miles on it and still is holding up well. Good job the issue I had when weight was applied to my basket it would sway when I got above 10mph but I have solved that problem no sway even at 20mph with the electric bike

first of all i just wanna say one thing, mistakes are how we learn. with that being said you really helped me with my project trailer , mine has a larger rear wheel, 26", to match my bike tires. but seeing how you overcame the obstacles during the process and came out with a really nice light weight trailer got me fired to do my own! thx brother! great job!

Amazing built! You have inspired me for making mine🙂 well done 👏🏻👌🏻

Yes, inspiration for sure.....

Work well

Great build! Thanks for showing the whole process-including screw-ups and recovery.

VERY nicely done (the build AND the vid) and very well explained. I have been looking for a DIY axle-height hitch answer for awhile. Glad I found this. THANK YOU!

I think I’ll just cut the whole rear triangle off my donor bike and attach the dropouts onto my axle for the bike end of the hitch

Awesome trailer. I hope you don't encounter too many speed bumps. It's still pretty low. Oh wait, there's a part 3!

I like the way you work, I too work the same until the final goal is achieved.

Greetings from Romania! Just started building my own trailer this morning!!!!! Thank you very much for your tutorial!! I learned a lot from your mistakes! I think tomorrow the trailer it's ready!I hope! Thank you again for all the good work you do:*

So impressive. Great job.

I have been building my own one wheel bike trailer for a while now and been thinking the way to attaching the trailer to the bike. This might be the way I will do mine too.

Great job thanks for sharing

So is that Physics law? that your speaking about in your video? I enjoyed watching your video b/c I enjoy watching your skill of putting your cart together.

The bounce means it's flexing..it needs another piece of tubing or 2 going from the hitch to the bottom of the trailer

Very cool release pin idea for the trailer. 👌 I bet you’re proud of that. I’d be pretty proud of it lol

Nice trailer, one wheel is good for cornering road 😀👍🏼

Nice and much better, Bravo

Great concept would have tried to make it a bit bigger but hey I like seeing how you and others do it and combine the ideas a little see how mine comes out soon it's in the design phase mine will be bolt together tho lol

great work, thanx for sharing!

Sitting home watching this because I’m off work from scratching my eyeball Thursday morning (fluke accident, I was pulling wire) and I’m able to watch because I’m starting to feel better. Good on you for the respirator and the ear muffs. May I recommend you get some better safety glasses?

Nice work

Thanks fore shareing great information! 👍

Well done, building one for me plse?

That's going to bend with a single hitch tube coming up from the trailer, should have another running parallel with it up to the top of the bike head tube you have for reinforcement.

How have the eyelets (intended for rack/fender mounting) held up to the strain of the trailer pushing and pulling on them as you accelerate and turn? I have been thinking about doing a similar build, but wasn't confident that the braze-ons would hold up.

Well done! So much easier for the beer 😂

Me gustó, buen diseño que medidas tiene el área de carga

Is it Aluminium frame ? Which material grade used in this project . What is the weight of this Trailer

No issues with assembly for me kzfaq.infoUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L but I could see where some might benefit from using an experienced bike assembler/mechanic. I'm an older rider starting back after a 10 year break. This bike exceeds my capabilities and has been easy to get comfortable riding. I'm mostly on easy trails with almost no street riding and have not been disappointed with the performance of the bike. My fitness level is far below what I previously rode with and because of that the mileage is going on the bike slowly. While I'm losing weight slowly, the bike seems to tolerate my 220 pounds just fine. The bike has been used by several family members ranging from 5'5" - 5'9".

An interesting answer to carting stuff around. A query or two, why such a small wheel on the back as a 20" is less resistance with better tire choices ? Your trailer is gonna hit speed bumps in the parking lot of the grocery store as it is very low. Just how much does your trailer weigh? I wish i could learn TIG welding but all the classes around here are for people who want to weld for a living not us who weld for ourselves.

Fantastic man - really enjoyed that. You ever take it off any sweet jumps?

very good, apart from he fact that it is a bit too low..

Дмитрий Иванов?

What was the finished weight of the trailer?

One can tell you are not a natural engineer