DIY Breathing Grave Using Cheap Motors
Рет қаралды 374
Күн бұрынTwo ways DIY build breathing grave using cheap synchronous motors, wood, pvc, and bottles and cans.
Intro 00:00-00:31
Materials 00:32-00:51
Motors and placement 00:52-01:23
1’’ PVC caps placement 01:24-01:37
Frame build 01:38-01:52
2’ PVC build 01:53-02:53
How it looks 02:54-03:27
Solid PVC build 03:28-04:10
How it looks 04:11-04:26
Using 2’ PVC, cans, bottles 04:27-04:52
In dark (sorta) 04:53-06:22
Another example in dark 06:23
Materials
10 ft Pipe x2 (cheaper route)
www.homedepot.com/p/Charlotte...
2 ft pipe x7 (more $, more convenient)
www.homedepot.com/p/IPEX-3-4-...
3/4 pvc fittings x6 (more or less)
www.homedepot.com/p/Charlotte...
1 inch pvc cap x2
www.homedepot.com/p/Charlotte...
2x4x8 wood stud x2
www.homedepot.com/p/2-in-x-4-...
5-6 rpm motors x2
a.co/d/08uJkPWA
Brown bed sheet (try thrift store first)
LONAVA Twin Size Sheet Set -... www.amazon.com/dp/B0BYK9PBNC?...
#cheap #diy #halloween #mechanism #props #easy #motor #skeleton #synchronous
@brianbenson3091 25 күн бұрын
Couple ways to add pipes to motors kzfaq.info/get/bejne/mMxoZq1-0pqWeJs.htmlsi=BNyOGllKw0PF8nxA kzfaq.info/get/bejne/oZqWicSVx6ipZ5c.htmlsi=9sCKX3xYgsd-vqfT
@gafarm1963 7 күн бұрын
@brianbenson3091 thanks for the help I ordered the 7mm flanges also.
@UndeadLaboratory 6 күн бұрын
This is pretty awesome, I think there are a couple of places you can save a little more money. Extend the pipes or shorten the "grave" and hole cut into the wood you don't need the caps at the end. I also think you can cut this down to 1 motor if you run a rubber band from one PVC to the other (in a figure 8 style). I really like this build though, it is a great prop for dirt cheap. Def going to do this in the future.
@brianbenson3091 6 күн бұрын
I appreciate the info. This channel was created for this exact reason; to find easier and cheaper ways of doing things. I was going to make holes in wood for poles, but went other route. Thanks for sharing some other tips for build!
@UndeadLaboratory 5 күн бұрын
@@brianbenson3091 easier and cheaper is always appreciated! Can't wait for more vids as the season approaches!
@gafarm1963 9 күн бұрын
How do you wire up the synchronize motors so they will work ? Like supplying electricity to make them work ?
@brianbenson3091 9 күн бұрын
They “should” come with plugs. If they don’t, you can get it here: a.co/d/0iSS1YJi Connector a.co/d/0bqlKaiv
Scary Teacher 3D Gaming
Рет қаралды 38 МЛН
CREATIVE COUPLE
Рет қаралды 59 МЛН
Matthew Peech
Рет қаралды 71 М.
ЕвгенБро
Рет қаралды 502 М.