DIY Easy Adding a Second Battery-Two Battery Switch and Fuse Block to Yamaha Jet Boat Take 2

Рет қаралды 44,733

3 жыл бұрын

2 Batter switch www.westmarine.com/buy/blue-s...
Awesome battery cable www.batterycablesusa.com
Bus Bars www.amazon.com/gp/product/B07...
Fuse Block
www.amazon.com/gp/product/B08...
Breaker
www.amazon.com/gp/product/B00...

Пікірлер: 17

@JamesGouda 2 жыл бұрын

Very clean work 👏👏👏

@JohnDoe50207 2 жыл бұрын

Thanks so much doing this video, doing the same to my 2021 ar 210 over this winter

@A5JDZK 4 ай бұрын

Good vid. Thanks for the info.

@jaimegomez7100 2 жыл бұрын

so the switch is always on 1 and you switch over to 2 whenever boat is off while using the stereo?

@Channel-About-Nothing 2 жыл бұрын

In my case I run the boat off one and when anchored I use battery 2. If I had identical batteries I would just use whichever.

@lamlam225 2 жыл бұрын

Is the first and second positive wire connected to the engine starter?

@Channel-About-Nothing 2 жыл бұрын

The two red wires connected to the single battery switch (1:30 ) go to the starters. When adding a second battery you don't change the wire's endpoints, just how the batteries connect.

@albertogarnelo6537 2 жыл бұрын

What size you use for battery wiring?

@Channel-About-Nothing 2 жыл бұрын

4 Gauge for the batteries

@stefcooper2424 Жыл бұрын

Are you gonna add an ACR? to keep from having to switch between batteries?

@Channel-About-Nothing Жыл бұрын

No, at least not anytime soon. I am perfectly happy with my Noco shore charger.

@serenitynoobosity5905 2 жыл бұрын

Does the negative bus bar need to be grounded or bonded to the metal on the boat (mine is fiberglass, so it will be hard to find a spot), or is the fact that it is connected to both negative batteries terminals enough to create an acceptable ground?

@Channel-About-Nothing Жыл бұрын

Sorry for the very late reply, it is grounded to the engines which is basically the only ground in this boat.