DIY: Electric Scooter Conversion With Hoverboard Parts

Рет қаралды 801,787

6 жыл бұрын

In this video I’ll convert regular kick scooter to electric one by using hover board parts.
36V 350W Brushless Motor Speed Controller + LCD Meter: goo.gl/dg1AGH
Thumb Throttle Handle: goo.gl/eWv2jB
0.15 x 8mm Nickel Plated Steel Strip: goo.gl/22c2of
10S 36V 16A BMS Board: goo.gl/Sf6vxz
High-temperature Resistant Tape: goo.gl/Yc7FA2
You could support me and my content creation by buying Well Done Tips official outfit: teespring.com/welldonetips
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips.

Пікірлер: 435

@HODYODesign 6 жыл бұрын

I'm not going to build such a scooter anytime soon, but I must confess, I'm really impressed by your skills! Impressive DIY project imo!

@fr33ourminds 6 жыл бұрын

HODYO Design I 2nd this. Well done

@neilbarbu 6 жыл бұрын

HODYO Design - No

@veluc6255 5 жыл бұрын

HODYO Design

@sagarevstore4524 3 жыл бұрын

you can try this one...kzfaq.info/get/bejne/fr9ngtCk28u1ZWQ.html

@arbusa_productions 3 жыл бұрын

@@sagarevstore4524 We took the same parts for our mini Wheelie bike video :D

@shaneellasdaicastrestorati3675 6 жыл бұрын

That is the best DIY electric scooter build I've seen on KZfaq great work.

@19janiboy96 6 жыл бұрын

You did a tremendously good job!

@nazrilhood582 4 жыл бұрын

Yup thx

@johnbeer4963 5 жыл бұрын

Usually when i watch youtube videos, people's battery work scares me. I like yours. Nice work.

@kaelking4470 5 жыл бұрын

I love how easily everything was for you mine will take me for ever to build and look nothing as good as this one great job

@stonedsavage7814 6 жыл бұрын

that was so neat a build that if i never watched this video and saw a photo of the scooter i would 100% believe it was bought from a shop! thats a testiment to your build skills right there!

@acer1633 5 жыл бұрын

I have never seen such an excellent job, I am impressed. truly. Genious!!

@odduser1634 5 жыл бұрын

Its a CLEAN DIY build, I have seen around.

@itsmewoodG 6 жыл бұрын

Great job, I love you attention to detail. I am currently doing a similar project, I am using a 10 inch hoverboard and using the motors, battery and charger to build an adult size trike.

@sunnyhillestate1 3 жыл бұрын

Great video! Very complete/detailed but not excessively long!

@no1slisteninganyway 6 жыл бұрын

Outstanding! A very nice piece of work.

@thecreaturefpv9295 5 жыл бұрын

Amazing video! Thank you for the detailed instructions. I am building one now and all I need to do is install the electronics and I will be on the road!

@ojonfpv 5 жыл бұрын

You look amazing, buddy. What a top design! Congratulations

@sriramayeshwanth9789 5 жыл бұрын

A video I've looking since many months 🙏

@hrishikeshb 6 жыл бұрын

This was an awesome build! Hope you enjoy the scooter :)

@MCsCreations 6 жыл бұрын

Really awesome work, dude. Really well done! 😀 BTW, I made a 10w LED flashlight inspired in your 100w one. I think it's going to be published in two weeks. 😊

@KennethTanFotografie 6 жыл бұрын

Fantastic build and excellently filmed.

@ivorygilyard2243 5 жыл бұрын

This was a very nice video, you did a great job and you explained everything really nicely. Thank you :)

@TheHayes32 6 жыл бұрын

Wow. That's awesome. Looks great.

@TheronGBurrough 6 жыл бұрын

Well done! Thanks for sharing your project.

@JoaoSilva22222 4 жыл бұрын

Man, you rock! I´ll follow your lesson and build one!

@AlexNijv 6 жыл бұрын

Impressive and clean build!

@fintelpen4225 6 жыл бұрын

Impressive clean wirings.

@zaromaco 5 жыл бұрын

Fantastic work my frend!! Best Regards from Spain!!!

@Fpvcrewgr 6 жыл бұрын

Very nice work !!! Good for you !!! I like your scouter!!!

@DiyEcoProjects 6 жыл бұрын

Sweet build, well done

@dcsensui 2 жыл бұрын

Thanks for sharing this. I’m thinking of doing something with my granddaughter’s hoverboard.

@88ElevenShop 3 жыл бұрын

Great, excellent, wonderfull ! Thanks for your dedication!

@UPLunko 6 жыл бұрын

Very clean build!

@olorb2618 4 жыл бұрын

Nice job! I like that its RWD

@christopherroberts22 4 жыл бұрын

I did a 350w conversion recently, I made the battery 250wh 7ah 2p10s Mj1 ... I split the pack and placed 4 batteries within each side hole of the chassis rail, as well as 12 batteries in the centre channel, there was also room in the centre channel for the controller ! I still have rear suspension too ! ;) I may copy your battery cover technique !

@lv7603 6 жыл бұрын

Nicely done and thanks for showing us.

@michalsosovec1722 6 жыл бұрын

Impressive build and also video production. Keep up, Jehu. Thanx

@Fridaynightmixtape 4 жыл бұрын

Im very impressed. Thank you for the video.

@aragorn318 6 жыл бұрын

wow, a genius with this stuff!!

@mygt8a4re 6 жыл бұрын

Very cool, nice work! I'm inspired to do a similar project now.

@johnny4498 6 жыл бұрын

What a great built, the best for a long time for me:)

@fletcher3913 6 жыл бұрын

Very nice conversion. Good work.

@jeremyplatt 4 жыл бұрын

Amazing. Thanks for making such an excellent video!!

@cholito1949 2 жыл бұрын

Congratulations !!! Very good work.

@VENKOwood 6 жыл бұрын

Nice work!

@medvedev2008 6 жыл бұрын

Красавчик, прямые руки, все очень аккуратно!

@dvvvideo 4 жыл бұрын

Ну мы тоже не плохо делаем kzfaq.info/get/bejne/e8WJopiamdS2pHU.html

@MrAsam317 Жыл бұрын

Epic mate thanks for making video

@y2leon 5 жыл бұрын

That bracket man, sweet...

@greg23842384 6 жыл бұрын

I did exactly the same project few months ago and scooter still going strong. I have overvolted this motor to 75 volts as i have found it was slow on hoverboard battery that is only 36volt nominal. Now it pulls like a horse and peak at 2000wats!!! You should make polyurethane tyre for back wheel as this solid rubber cause lots of rolling resistance and your motor will be hot after few miles. Mine after polyurethane mod runs cool and consume 50%less energy so its a mod worth doing

@pxl666 6 жыл бұрын

greg can u elaborate? Isn't easier to replace tire for pneumatic one ??

@greg23842384 6 жыл бұрын

Olga Piskorska you can't replace with pneumatic tyre as there is no space for tube valve you would have to drill thru hub motor and magnets and then motor stator would prevent wheel from spinning unless you would somehow mods this and route valve to come out on the side of motor. I basicly used polyurethane same material that skate wheels are made off. You can buy kit mix two part like resin and pour into mold and you get perfect low rolling resistance wheel. Please check my channel I have short video showing my scooter partially finished

@robroberts2064 6 жыл бұрын

You have quite a few videos. This one? kzfaq.info/get/bejne/g8p4qNl82825dXk.html

@greg23842384 6 жыл бұрын

Rob Roberts yes my friend

@batlin 6 жыл бұрын

Does the PU wheel wear down quickly though?

@Akon12399 5 жыл бұрын

Very impressed, I have a broken hoverboard just sitting around so I was gonna try and make something out of it, the only problem is that I lack some electronics knowledge. I would love to see you explain like what and why the electronics parts do, for instance that yellow connector, the different wires that stick out of that speed controller box.

@Nenea2a 5 жыл бұрын

Very nice work !!! I like your scouter!!! It would be great to have brakes. Brakes is important in crowded places. Maybe add breakes in another movie ;)

@JohnThornley 5 жыл бұрын

Great project. Well done.

@jamieogg3608 4 жыл бұрын

Very professional work

@letmefindout81 6 жыл бұрын

my respect to you sir, you are very creative.

@bahorized 6 жыл бұрын

Good job, looks awesome.

@rehankhan-dd3dc 6 жыл бұрын

Very nice perfection is your plus point. Keep it up have fun with your scooty.

@samayaraj7542 4 жыл бұрын

Nice work. Excellent explanation

@charltonteo1735 6 жыл бұрын

Really impress hope to see more electric scooter video

@MrCopcreator 6 жыл бұрын

Nice job, looks same as i did, but ur video is very detailed and looks more upgraded than mine version 🤗

@truelies77765 4 жыл бұрын

Good job, bro!

@Zlandres2 5 жыл бұрын

muy buen trabajo es usted un ingeniero,very good job.

@tommaestro7356 5 жыл бұрын

Nice work, my friend.

@dovydasvilcinskas3834 6 жыл бұрын

Looks very clean for diy :) gj

@ferjanyen 4 жыл бұрын

Nice work, With the hover board I will make a push unit to latch on the back of the scooter plus a steel cable to tilt the hover board to go forward or to stop. Cut and narrow the fibre glass stand on the hover board as it will not be needed. Presto!!

@anivarhain 5 жыл бұрын

Really nice build

@correaponce4251 4 жыл бұрын

Hell of a job. Wow impressive.. 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

@publicmail2 6 жыл бұрын

Good nice and neat job!

@deathwingelitegantz5264 6 жыл бұрын

Awesome Job

@Movieman1965 5 жыл бұрын

Nice job! Nice DIY video!

@777sgiles 3 жыл бұрын

Please do a diy video on converting a knee scooter into a seated electric scooter. Please pretty please! I’ll bet you’ll go viral!

@speedsterh 4 жыл бұрын

Excellent job, through and through. I can do all the steps you did, but not as cleanly as you ! Congratulations. In hindsighting, designing a covered place for the controller inside the brackt would have been the better option. Still, a great build

@gameboyprototype5046 Жыл бұрын

Very clean nice work. Great that you chould use a broken hooverboard to make this C😎😎L project.

@pterodox123 4 жыл бұрын

Very well done informative video!

@davidpotter3777 5 жыл бұрын

Mad skills! Build a simple car next. God bless , aloha

@niniliumify 6 жыл бұрын

Excellent Work

@Hitngan 3 жыл бұрын

So good really enjoyed that. Subbed.

@sarge27271 4 жыл бұрын

My friend, kudos on 1) The build. And 2) The Editing!! Superb. Succinct. Awesome!!!! You should make a video on "video editing".....Lol

@ProjektHeld 4 жыл бұрын

Wow not bad. I like your work! I build an electric longboard with hoverboard parts.

@S30Uploads Жыл бұрын

I'm so glad I save like three of these things but only the motors

@Love-u-forever. 6 жыл бұрын

awesome to build nice work

@BarryBlok730 6 жыл бұрын

Nice build

@Adam_Tilbrook 2 жыл бұрын

That's sick! Wish I could do that to my kick scooter but I don't have the skills necessary.

@MrTruecross 5 жыл бұрын

You did awesome dude

@digable007 6 жыл бұрын

You nailed it.... If you can point me in a direction of a Razor 300 type motor connected to a Yeddoo type scooter with a Shimano Alfine internal 11-speed hub with the electronic gearing. That should be your next project...that was freaking awesome...

@sandeshkhilare893 5 жыл бұрын

Good job I really impress 👌🏼👌🏼👍🏼

@SimplyAlteringMaterials 6 жыл бұрын

GREAT JOB!!!!!!!!! 😀👍

@dnagarjuna1610 4 жыл бұрын

Simply superb

@MuslimEng765 5 жыл бұрын

Very good craft !

@goldengamer8832 3 жыл бұрын

Congrats! Ur so good in tec bravo ❤️❤️👏👏👏

@andrewmarasek620 4 жыл бұрын

awesome build. i mean, you could buy a xiami scooter for basically the same price and have an app and mod the controller, but i like the idea of learning. things like this i want to do with my kids as they get older so they can learn to figure things out on their own as adults. fun video to watch regardless.

@Tyler.i.81 5 жыл бұрын

Your a clever guy wish I could make something like this.

@ibzanypava9863 5 жыл бұрын

Greetings, thank you for sharing excellent work, you would be so kind to tell me that you soldered or soldered in the back of the controller, thanks from Colombia

@avichainimni 6 жыл бұрын

Well done!

@CykasAppleTV 6 жыл бұрын

super cool!

@delightdevice 5 жыл бұрын

Great job!

@mrborland627 5 жыл бұрын

Good job bro. Nice scooter..!!

@srrtbb 5 жыл бұрын

That's awesome man. But I was thinking why not mod the stock rear suspension to accept the hover board wheel?! Either way amazing job on the built.

@christopherroberts22 4 жыл бұрын

Because he would have not enough space for the battery & controller ! (unless he copied my technique ;) --- "" did a 350w conversion recently, I made the battery 250wh 7ah 2p10s Mj1 ... I split the pack and placed 4 batteries within each side hole of the chassis rail, as well as 12 batteries in the centre channel, there was also room in the centre channel for the controller ! I still have rear suspension too ! ;) I may copy your battery cover technique !""

@daisukevideo 3 жыл бұрын

The video was great! In Japan, you can't easily ride an Electric scooters yet. The law is troublesome. I'm looking forward to the video! With love from Japan :)