DIY ELECTRIC SKATEBOARD/ For Students/ Tutorial

Рет қаралды 312,145

Күн бұрын

This is my first video about a very cool DIY project of mine: an electric skateboard.
It has a top speed of 30 km/h and small hills are no problem for the gear. It´s perfect for going to university or college, because of its small size: ~60cm long.
The battery is easy to change on the go and lasts for about 1 hour.
links:
Motor: hobbyking.com/en_us/turnigy-a...
Esc: www.ebay.com/p/FVT-120a-Brushl...
Motor Mount + wheels + trucks: www.enertionboards.com/diy-ele...
Remote: hobbyking.com/en_us/quanum-2-...
Pulley: 5M12T-Synchronous-Timing-Belt-Pulley (found on ebay)
Charger:www.amazon.com/Professional-D...
Lipo: hobbyking.com/en_us/zippy-com...
Programming card: www.ebay.com/itm/FVT-120A-elec...
If you enjoyed the video pls hit the thumbs up.
For any questions about the project, feel free to ask.

Пікірлер: 592

@jimmythegent9190 7 жыл бұрын

i would most definitely get shot by NYPD skating around with that controller. I'll pass on that type of controller.

@teamnova5671 7 жыл бұрын

COMET212 paint it orange or something

@vabien3268 7 жыл бұрын

COMET212 It could probably be interchanged with a more traditional electric skateboard controller

@MattCarl 8 жыл бұрын

Nice dude, this is awesome!

@HTB567 7 жыл бұрын

first time watcher and loved your videos dude keep it and thanks for the inspection to build one of these my self

@adrienswayofdoingit8360 7 жыл бұрын

Thanks

@lakshmidurga1558 6 жыл бұрын

Wat will be the ampere rating of esc if we want to used 400kv/rpm motor?

@samuelfilipe6493 7 жыл бұрын

Very nice video by the way!

@MakingithappenVlog 7 жыл бұрын

I enjoyed this! Keep up the awesome work you are doing here! I definitely will subscribe to your channel! 👌

@adrienswayofdoingit8360 7 жыл бұрын

Thank you

@camerons9677 6 жыл бұрын

Dude, Awesome build

@adrienswayofdoingit8360 6 жыл бұрын

+Cameron S Thank you bro

@mariobeltramegarcia7727 7 жыл бұрын

you are a pro! i bought all the stuff and maded it and is awesome

@noonewillnoo 7 жыл бұрын

Mario Beltrame Garcia still working?

@aayushkafle2382 7 жыл бұрын

Li Sp V DIY's are easy to fix

@max7234 7 жыл бұрын

Mario Beltrame Garcia I

@matthewfishman517 6 жыл бұрын

How much did all of the parts cost

@snoiny3730 6 жыл бұрын

How much does it cost in all

@RGBFreak 7 жыл бұрын

great video man. I subbed

@adrienswayofdoingit8360 7 жыл бұрын

Thanks

@KieranEboard 6 жыл бұрын

Nice Job, congrats.

@adrienswayofdoingit8360 6 жыл бұрын

+Kieran E-board Thanks Kieran, (I just ordered the meepo parts🖒).

@daneolson429 7 жыл бұрын

This is dope good job

@adrienswayofdoingit8360 7 жыл бұрын

Thanks

@NewKnowledge0 7 жыл бұрын

What MM Motor Pulley did u buy thanks. Secondly is there anything cheaper u can buy to lower the price? thanks!

@benji376 7 жыл бұрын

Parts list?

@Lc-or5ef 7 жыл бұрын

Dude that's sick 😝

@abrory9117 6 жыл бұрын

What tooth width and bore should i pick?

@cjtac5077 7 жыл бұрын

this is really awesome though. especially for your first video

@jonnywaselectric 7 жыл бұрын

if you heat heatshrink from the top you don't get flame marks, I do the top then flip it over, or use a jet lighter and it doesn't matter. nice build

@adrienswayofdoingit8360 7 жыл бұрын

thanks

@tannergrimes5746 7 жыл бұрын

links to everything you need for this?

@adrienswayofdoingit8360 7 жыл бұрын

Look in the comment section

@lukashamrin5689 7 жыл бұрын

lol your inspired by electric skateboard builder huh? lol

@Chickey 7 жыл бұрын

Would have been nicer to have them listed in the description rather than having to pick through 112 comments...

@lukashamrin5689 7 жыл бұрын

just go to enertition.com or something like that, there are all the items you need

@D.Cooper420 7 жыл бұрын

enertionboards.com

@human8903 6 жыл бұрын

From where you shipped the item

@EmmettOHanlon 7 жыл бұрын

Could one just order the enertion RC romote and VESC? Sorry, new to this so that might be a stupid question... GREAT VID!!!

@FK-yb1ml 7 жыл бұрын

sure you can do that, apart from the bundles they sell you can also buy parts seperately from their website

@yanivdor1 7 жыл бұрын

I cant decide what esc to buy for my e-longboard. I know the Vesc will not be the one because it support only 50A and is very weak compering to RC esc's. Help me decide, does the FVT have soft cut off or sudden stop ? what are the cons ?

@adrienswayofdoingit8360 7 жыл бұрын

FVT is more like a sudden stop, you can program it not to. But it is still hard to break when you are driving around with 30 km/h. (But due to the momentum, it is a total normal break with some low speed ~15km/h) : )

@thomasherbst4683 7 жыл бұрын

U should really make more videos cause this was really good

@johannlopez4524 7 жыл бұрын

If i just wanted the motor mount kit without the trucks or wheels, is there a cheaper alternative. that single drive mount kit is kind of pricey

@adrienswayofdoingit8360 7 жыл бұрын

you could try to build your own motor mount for your own skateboard/ or maybe you can find something on aliendrivesystems.com ... : )

@williamphipps8548 7 жыл бұрын

That being a 6s lipo esc are u only hooking up 1 and keeping the other one in the box for a backup battery

@adrienswayofdoingit8360 7 жыл бұрын

+William Phipps Yes, I always have a backup battery on me

@sinaebrahimzadeh7700 6 жыл бұрын

how can I buy this stuffs. I'm iranian

@Facepalmsareus 7 жыл бұрын

I have the same remote and i cant get it to hook up to the receiver. How did you get it to work?

@adrienswayofdoingit8360 7 жыл бұрын

I followed the manual, (I plugged the esc wire in channel Nr. 2 of the receiver).

@rae6261 6 жыл бұрын

Can u pls link the tricks cuz I can’t find em.

@salahaljitawi9237 5 жыл бұрын

what size are the connectors

@icepagey7351 7 жыл бұрын

Can you link the different supplies, motors, batteries ect. used?

@adrienswayofdoingit8360 7 жыл бұрын

I posted them in the comments, but search the names of the products on (google)/ hobbyking/ enertion and ebay

@jhnrckdeleon6651 6 жыл бұрын

how much did it all cost? thank you

@redsebas123 7 жыл бұрын

Does anyone know around how much he spent on this project?

@joshuagreenway5158 7 жыл бұрын

Where did you get the carbon fiber piece and the bolts to go through the wheel at 2:00??Do they come in the kit?? I would greatly appreciate the help!

@adrienswayofdoingit8360 7 жыл бұрын

Yes, everything comes in the kit

@dedead76 7 жыл бұрын

hi, are you using a homemade brushless cam stabilizer ? can you tell me more about this set up ?

@adrienswayofdoingit8360 7 жыл бұрын

yes, it is the zhiyun smooth c stabilizer for smartphones : )

@cjtac5077 7 жыл бұрын

for the futre, it always helps to link the websites to places you got your gear from

@adrienswayofdoingit8360 7 жыл бұрын

Thanks

@elliotbruce4774 7 жыл бұрын

Have you put the trucks on something to rise them, its not too clear in the video?

@adrienswayofdoingit8360 7 жыл бұрын

Yes, I think it´s always like this, it was all in the set from enertion. ( You can see it in the picture at 1:03 )min

@dany128955 6 жыл бұрын

Hi, i see using deck 60x20. Can you tell me how long are trucks (total)? and is this 83mm wheels? Thank you.

@adrienswayofdoingit8360 6 жыл бұрын

the trucks are 26cm wide and these are 83mm wheels : )

@iwi3434 7 жыл бұрын

Can anyone find the motor mount? I can't and the link in the description doesn't work.

@adrienswayofdoingit8360 7 жыл бұрын

Seems to have disappeared... Maybe you can contact the support from enertionboards

@Cooldudeyus1 7 жыл бұрын

can you kick push normally with this, some people say you can't kick push with belt driven ones?

@adrienswayofdoingit8360 7 жыл бұрын

+yusuf Misbah you can do it, but there is a small resistance

@samuelfilipe6493 7 жыл бұрын

Hello Adrien I wonder if it is possible for 2 engines equal to this working togetherfor the 2 back wheels? I wait for reply and thank you

@adrienswayofdoingit8360 7 жыл бұрын

It is totally possible, but not with these motors: They are to big to put 2 in line for the back wheels. If you want two motors you have two options: - take smaller motors so that they fit. - Or take the same motor, but put one in the back and one in the front. (Search in google or youtube: Electric longboard dual motor)

@samuelfilipe6493 7 жыл бұрын

Thanks for the help!

@seandejong7654 7 жыл бұрын

On enertion I could only find a set with a motor... Where did you get yours?

@adrienswayofdoingit8360 7 жыл бұрын

I bought it at hobbyking.com

@WORLD-OF-MERLIN 6 жыл бұрын

Can a Nano remote control handle 4 VESC's or what do I need to make a 4 wheel electric skateboard?

@adrienswayofdoingit8360 6 жыл бұрын

+ELLIOTT MORIARTY Two electric wheels are more than enough, Also there is the dual vesc which can handle two motors so you don t have to 4 vesc

@WORLD-OF-MERLIN 6 жыл бұрын

I know, but I just want to over engineer my board so that each motor only has to carry 25% load of everything, so that they are not ever stressed going steep up hills, run cooler, and etc....

@NewKnowledge0 7 жыл бұрын

I don't think that web site sells the motor mount anymore, also you can't buy the trucks. If you could find something that would work please give the me the link that would be great. Sorry I am new to it and I want to build an electric skate board. Thank you

@adrienswayofdoingit8360 7 жыл бұрын

+majestic vids Before buying a motor mount, Think about buying some Hub motors (motors which are in the wheels, so you don t have to buy the motor, motor mount, pulley, trucks and wheels separately.)

@ColeBender 7 жыл бұрын

Hey, awesome video! I was wondering what the braking was like on your board. I have a similar ESC in my board the the breaking is super sharp.

@adrienswayofdoingit8360 7 жыл бұрын

The braking is good ( not very good) but you can program it with the esc card. If I am faster than 20-25 km/h and I want to brake, it is very sharp! But if I have a speed of 10-15 Km/h, the braking is pretty good: you need a few meters before standing and it´s pretty smooth. Thanks : )

@rasenmaher7666 7 жыл бұрын

From where did u get the gear and the motormount? Have a nice motor and a batterypack already at home, so just need the mount

@rasenmaher7666 7 жыл бұрын

dont think about it, watched the whole video now. sry xDDDD

@johannlopez4524 7 жыл бұрын

How could you bring the price down to around 350

@freshbranches 7 жыл бұрын

Can you send me the link to where you got your motor pulley

@adrienb4158 7 жыл бұрын

www.ebay.com/itm/5M12T-Synchronous-Timing-Belt-Pulley-Gear-Wheel-Sprocket-Bore-5-6-6-35-8-10mm-/161911421445

@diywithpapo4576 7 жыл бұрын

how did you get regenerative braking

@adrienswayofdoingit8360 7 жыл бұрын

+DYI WITH PAPO It is preprogrammed in the esc I used.

@EmmettOHanlon 7 жыл бұрын

also, did you build the casing?? Casing dimensions?

@adrienswayofdoingit8360 7 жыл бұрын

Yes I built it, but I would recommend you, to order first the electronic and then to make your own custom-made enclosure

@Lampickagaming 7 жыл бұрын

Great tutorial! I love your build and I am wondering about doing something similar. I have a few questions: 1) How do you charge the battery? Do you have to unplug the whole thing and connect it to a power source at home? 2) Also when the charging is finished, does the charging stop automatically or do you have to unplug it to prevent overcharging? 3) How far can you go with one battery? You said it lasts one hour so is my estimate of ~ 25 km range correct?

@adrienswayofdoingit8360 7 жыл бұрын

So I have my small lipo charger which works with a normal 12V cable (laptop cable/ If you don´t have such a cable, it only costs 10 bugs); the charging process takes about 2 hours and stop by itself, but I would recommend to charge it only ~95% and not 100% ( it´s better for the battery). And the range depends, but it should be around 20 km.

@yannick1250 6 жыл бұрын

How do you use the programming board and is it hard?

@adrienswayofdoingit8360 6 жыл бұрын

It is very easy to use, In three days I am going to release a new tutorial much better

@yannick1250 6 жыл бұрын

Adrien ́s way of doing it ok, thank u!

@rodrivh 7 жыл бұрын

Can this be included by myself in a Penny Board or all the stuff is to big for it?..

@adrienswayofdoingit8360 7 жыл бұрын

I think it should be ok

@akisakis9397 7 жыл бұрын

hello i have a broblem i make a homemade electric skateboard i bought a fvt esc 120A when i was connected the old 18650 battery (old battery ) the motor running but a few minute (old battery ) i bought a new 16850 2800mah samsung but when i was connected the fvt esc show-off maybe the new battery the A its to high but i dont no please help me thanks

@adrienswayofdoingit8360 7 жыл бұрын

+akis akis How much volt does your new battery have?

@akisakis9397 7 жыл бұрын

i make a battery pack from the old battery and the ne battery pack from the new battery the volt its the same 22.2v

@akisakis9397 7 жыл бұрын

i make of the old battery laptop battery pack and same second batery pack of the new battery the battery pack its 22.2v of the 6cells each maybe the A of the new battry its too high so when i was connect the battery withesc the esc power off maybe my solution to buy the external esc stable power 6v/3A or to buy bms protection board ?

@abrory9117 6 жыл бұрын

Link for motor mount wheels and truck are expired can you give another one

@adrienswayofdoingit8360 6 жыл бұрын

In one week i am going to post a new video with a new e-skate build, which is going to be cheaper

@AlexandreJennison 7 жыл бұрын

Good video could you please tell my how to program regen braking and is their any way of building it for cheaper thanks

@adrienswayofdoingit8360 7 жыл бұрын

The regen braking is pre-programed on the esc. Do a little bit of research and maybe you are going to find something cheaper.

@AlexandreJennison 7 жыл бұрын

thanks so much i meant to say that i love your video but i was in a rush

@adrienswayofdoingit8360 7 жыл бұрын

Thanks

@TheDimaSomov 6 жыл бұрын

Does it really have regenerative braking? I thought only VESC controller can do that

@adrienswayofdoingit8360 6 жыл бұрын

+TheDimaSomov No, most Esc have regenerative braking

@adrienswayofdoingit8360 6 жыл бұрын

+TheDimaSomov So yes, it does have regenerative braking

@justanamethatiknow 7 жыл бұрын

Can you link all the products you used please? And how do you brake? Also does the board have to be made out of wood or do you think this can be done on a pennyboard?

@adrienswayofdoingit8360 7 жыл бұрын

Hi, The esc has a regenerative braking function which you can program (very easily) high or low with the programming card (you could even drive backwards). I think that with all the electronic, a normal pennyboard would not be perfect because it is so flexible; so I would recommend to take a material like wood (which is more stiff). For the link of the products, just search in the comment section.

@I.S.electric 7 жыл бұрын

can you please tell me why you put the ESC in the box because it has air cooling so isn't that kinda bad?

@adrienswayofdoingit8360 7 жыл бұрын

The ESC has no overheating problems in the box. There are a lot of small holes and gaps in the box to let some air in, but even during a very hot summer I had no problems with it.

@adrienswayofdoingit8360 7 жыл бұрын

And it just looks a lot better like this : )

@davidmarcus4277 7 жыл бұрын

Est-ce que t'on moteur est plutôt chaud (a pas pouvoir le garder trop en main) juste apres utilisation?

@adrienswayofdoingit8360 7 жыл бұрын

il est chaud, mais tu peux le garder en main.

@aerilfarshah6710 5 жыл бұрын

it is water resistant ? and the motor doesnt have cover why

@adrienswayofdoingit8360 5 жыл бұрын

Not totally, but it worked fine in rain and snow for me

@williamtrojel4658 7 жыл бұрын

Do you need to do any kind of programming to make this?

@adrienswayofdoingit8360 7 жыл бұрын

No, not at all- it is super easy

@joshninny 7 жыл бұрын

can you use a board that has concave?

@adrienswayofdoingit8360 7 жыл бұрын

+joshninny You could try, but it is risky

@chasingwaves11 7 жыл бұрын

that T connector you called that is a Deanz connector so you know .. and that out runner motor is a helicopter motor they use on 700 to 800 size heli's ... sorry I'm just an R/c nut lol been in the hobbie since the 90's lol .. nice build man

@adrienswayofdoingit8360 7 жыл бұрын

Thanks

@elliotbruce4774 7 жыл бұрын

Hi great video, just wondering a couple of things. What is the board dimensions and also what type of parts did you use like what type/model and motor or battery?

@adrienswayofdoingit8360 7 жыл бұрын

Hi, The board has a lenght of ~55 cm and for the parts: it´s all written in the video, just search them on following websites: - motor + lipo + transmitter/receiver + ... on hobbyking.com - esc (from svt) + programming card (from svt) + pulley on ebay.com - motor mount set... on enertionboards.com - lipo charger from amazon.com

@elliotbruce4774 7 жыл бұрын

Thanks You so much!

@othlun5541 7 жыл бұрын

How do u use the programming card?

@adrienswayofdoingit8360 7 жыл бұрын

just plug the esc into the card and choose between a few options: acceleration, brake system... it is really easy : )

@edinhojuniorful 7 жыл бұрын

gostei muito,vou fazer um igual aqui no brasil, ok

@wastecontainer4237 6 жыл бұрын

Thinking about building one. About how much does a setup like this cost?

@adrienswayofdoingit8360 6 жыл бұрын

+ThoseTeenGamers This cost 450€, but in 2 weeks I am going to post a video about a new one a lot cheaper

@nsfilms3589 7 жыл бұрын

Hey, everyone that is about to make and electric longboard. I have been following this exact tutorial and is a nice and cheap way to have your own longboard! But one word of advice... don't buy the ESC used in this video (from China). I invested in one of these and one day, it stopped generating voltage to the motor. PLEASE invest in a VESC. Great Tutorial though! It helped a lot!

@PeterMJensen27 7 жыл бұрын

NS FILMS people say a VESC needs programming? How do you do that?

@nsfilms3589 7 жыл бұрын

Peter Møller Jensen To program a VESC you must use an application on your computer called BLDC tool. There are tytorials on line but you coneect it using usb to your computer and connecting a mini usb to the VESC.

@jansvatos3208 7 жыл бұрын

Hi, I'd like to ask you about the esc, if is it still working. thanks

@adrienswayofdoingit8360 7 жыл бұрын

Yes, it is still working

@jansvatos3208 7 жыл бұрын

I will probably install a bigger heatsink on it, thanks for reply

@bayasgalanenkhbayar3024 7 жыл бұрын

can u give me the link of timing pulleys

@adrienswayofdoingit8360 7 жыл бұрын

it is in the comments (found the small one on ebay)

@rafaellibertini9240 7 жыл бұрын

Could a motor like this be used in a electric bycicle??

@adrienswayofdoingit8360 7 жыл бұрын

Maybe, I am not sure

@chris2944 7 жыл бұрын

Rafael Libertini buy a hub motor from AliExpress or Alibaba. all you need then is an esc and a battery which you can buy from the same place.

@yanivdor1 7 жыл бұрын

Hi Adrien, how would you rate the amount of torque of this setup ?

@adrienswayofdoingit8360 7 жыл бұрын

the torque is more than enough, I weigh 80kg and I get some very fast accelerations ! : )

@nigelngyuenyan 7 жыл бұрын

so what happens when the battery dies? Can you charge it?

@adrienswayofdoingit8360 7 жыл бұрын

Nigel Ng Sure (with a normal lipo charger)

@lakshmidurga1558 6 жыл бұрын

can we make the motor run without esc?

@adrienswayofdoingit8360 6 жыл бұрын

No, I don t think so

@ferminorte9246 7 жыл бұрын

I didnt see any motor of 213kv. Is valid a motor turnigy sk3 w/ 2830-1130 kV?

@adrienswayofdoingit8360 7 жыл бұрын

If you don´t find the 213kv, I would recommend the 190kv

@ferminorte9246 7 жыл бұрын

Adrien ́s way of doing it thanks

@simoneebasta6695 7 жыл бұрын

where you buy what sckateboard? what's his name? how much?

@adrienswayofdoingit8360 7 жыл бұрын

it is all in the video

@joecox6703 7 жыл бұрын

where did you get the pulleys i dont have enertion wheels so their pulleys wont work

@adrienswayofdoingit8360 7 жыл бұрын

www.ebay.com/itm/5M12T-Synchronous-Timing-Belt-Pulley-Gear-Wheel-Sprocket-Bore-5-6-6-35-8-10mm-/161911421445

@joecox6703 7 жыл бұрын

what about the larger pulley you attach to the wheel

@adrienswayofdoingit8360 7 жыл бұрын

That one was in the kit I bought from enertion.

@tristonwebber9982 7 жыл бұрын

did you fix the wobble on that wheel gear? , overall a great vid, someone somewhere will always complain, I'm working on a vid....actually a few vids now, one is of a longboard on a budget but not a frankin longboard, ocd makes me have to have it look great lol.....

@adrienswayofdoingit8360 7 жыл бұрын

Thanks, I am going to look out for your videos : )

@charafhero3944 5 жыл бұрын

Where did yu get tje box from

@adrienswayofdoingit8360 5 жыл бұрын

I built it

@bayarn781 7 жыл бұрын

What motor I you use an can you reply the link of motor

@adrienswayofdoingit8360 7 жыл бұрын

www.hobbyking.com/hobbyking/store/__18180__Turnigy_Aerodrive_SK3_6364_213kv_Brushless_Outrunner_Motor.html

@EmmettOHanlon 7 жыл бұрын

My Programming card (the one you have in the video) doesnt seem to be working. when i plug it in, it just says "ESC Model V1.00_121012". Is this a sign that its broken or do i need a firmware update??? Sorry for the noob question. New at all of this. Thanks!! P'S' GREAT VID!

@adrienswayofdoingit8360 7 жыл бұрын

I am not sure, but I would say that it maybe need a firmware update. Just try out some stuff, and if it really doesn´t work, send it back. Thanks

@EmmettOHanlon 7 жыл бұрын

Thanks for the reply!! Where would I find the firmware? (I have a mac**) Thanks for the help man

@shadowsfpv3561 7 жыл бұрын

hi really good video i was to order everything now... do you think it is worth it? does it go on hills to ? slow fast? and what is the programming card??

@adrienswayofdoingit8360 7 жыл бұрын

I build this board 1 year ago, so maybe (at this time) there are some cheaper alternatives out there... (Some hub motors would be cool : ) But this one is fast and small hills are no problem for the board. The esc programming card, is a lcd programming card from fvt.

@HB-jf6yq 7 жыл бұрын

Does enertion board ship to the UK? If so, is there tax we have to pay or is there a UK warehouse? If not, where else can i get wheels for electric skateboards

@adrienswayofdoingit8360 7 жыл бұрын

+HB Designs Enertion board ship from Australia. So you are going to have to pay a lot of taxes.

@HB-jf6yq 7 жыл бұрын

Adrien ́s way of doing it Is there any other way of getting these wheels? Any other brands on the UK amazon?

@adrienswayofdoingit8360 7 жыл бұрын

+HB Designs In the UK there is a company, something with alien (alienboard, alien electronics...) something like that : )

@adhamelsharkawy4601 6 жыл бұрын

Can you make it with hub motor wheels

@adrienswayofdoingit8360 6 жыл бұрын

+Adham Elsharkawy Yes, coming in February

@avahelm3154 7 жыл бұрын

Where did you get the board? I like the look of it.

@adrienswayofdoingit8360 7 жыл бұрын

+Ava Helm Thanks, I made it, I also did a video about it. : )

@moritzmiedler1396 7 жыл бұрын

where did you bought the set

@adrienswayofdoingit8360 7 жыл бұрын

enertionboards.com

@TheJopelletier 7 жыл бұрын

cool project!!! i subscribed to your channel !

@adrienswayofdoingit8360 7 жыл бұрын

Thanks

@kevwe_tech 5 жыл бұрын

I will like to have one of this

@pandagamingshaul2347 7 жыл бұрын

how can i cahrge the skateboard??

@adrienswayofdoingit8360 7 жыл бұрын

With a lipo charger ( I have the Imax b6 mini from sky rc)

@brandontheg8470 7 жыл бұрын

how did you make that box

@adrienswayofdoingit8360 7 жыл бұрын

I made it out of wood and put some cool stickers on it : )

@nanangmenyan4535 7 жыл бұрын

how can i get the pulleys??

@adrienswayofdoingit8360 7 жыл бұрын

+Nanang Menyan You can get some pulleys on ebay

@LuxxyHD 6 жыл бұрын

How come the esc can only take 6s but your running 12s

@adrienswayofdoingit8360 6 жыл бұрын

I only use a 6S battery

@LuxxyHD 6 жыл бұрын

Adrien ́s way of doing it sorry is that two 3s in series

@adrienswayofdoingit8360 6 жыл бұрын

No the second battery is only a backup battery if I run out of power. But when riding it, I am only using one 6S lipo

@EmmettOHanlon 7 жыл бұрын

Hey, what mm is the timing belt?? 12mm or 9 mm? Thanks Man

@adrienswayofdoingit8360 7 жыл бұрын

12mm

@djmaningas 7 жыл бұрын

How did you make the box?

@adrienswayofdoingit8360 7 жыл бұрын

I made it out of wood and put some cool stickers on it : )

@DuongNguyen-cg5tq 7 жыл бұрын

what is the Programming card for?

@adrienswayofdoingit8360 7 жыл бұрын

to setup the esc: -Strong/soft braking -strong/soft acceleration -should it be able to go backwards ...

@timbrown110 7 жыл бұрын

Song?

@sothun11 7 жыл бұрын

arent the trucks backwards?

@adrienswayofdoingit8360 7 жыл бұрын

No, these are longboard trucks

@davidkolb6807 7 жыл бұрын

what was the cost of all of this, not counting the board

@adrienswayofdoingit8360 7 жыл бұрын

The electronic was only 200€

@oliverfritsche3343 7 жыл бұрын

do u have a parts list

@adrienswayofdoingit8360 7 жыл бұрын

Not really, Search in the comments or in google, Sorry

@krish.sagar_ 6 жыл бұрын

How to charge battery

@adrienswayofdoingit8360 6 жыл бұрын

+Tech kingdom with a lipo charger (6s)

@yassinali8733 7 жыл бұрын

Where did you get the pulleys from?

@adrienswayofdoingit8360 7 жыл бұрын

ebay, I already send the links in the comment section