No video
DIY Electric Skateboard
Рет қаралды 120,233
Күн бұрынElectric skateboard is something I always wanted to build after watching Casey Neistat riding it :) So here it is! Those 4 days of building this DIY project were quite long but I got it working really nicely. There are still things to improve especially the battery, soon I will make a video about building your own DIY battery for an electric skateboard with 18650 cells. Keep in mind that I am really terrible at skateboarding or longboarding, so even this speed of 24km/h is really super fast for me, I need to practice riding it a little bit more :)
Brushless Motor: bit.ly/2x9GQP2
ESC Substitute: bit.ly/2L4uWys
Pulley And Belt: bit.ly/2Kr4LSV
Battery Connector: bit.ly/2Rq5NPG
LiPo Batteries: bit.ly/2IsOc6M
18650 Batteries: bit.ly/2FmTY8d
Ender 3: bit.ly/3huQu4u
Dremel CNC: bit.ly/2IrKYk1
Instagram: nikodembartnik
#electricskateboard #diy
@nikodembartnik 5 жыл бұрын
Support my work on Patreon: www.patreon.com/nikodembartnik Thanks!
@Not-C-418 5 жыл бұрын
8:30 There is a liqued called thred locker you can find it in amazon it's cheap and very helpful for the screws www.amazon.com/dp/B07RWPVWGY/ref=cm_sw_r_cp_awdb_t1_3KWlDbQX7JHAQ
@reptiloidx8942 5 жыл бұрын
HEY LAD . I NEED LIL ADVICE HERE ON ESCs AND VESCs . WELL I ORDERED 4600W 4x MOTORS AND I HEARD TO REACH THE MAXIMUM POWER I NEED SUPPLY THEM WITH 48V ........ WELL IS THERE ANY WAY I CAN FUK THE PEDAL TO HEAT THEM UP TO MAX WITH 22V-28V ??? BIG THANK YOU
@daytonrowen4515 3 жыл бұрын
You all prolly dont give a damn but does someone know of a method to get back into an instagram account? I somehow lost the account password. I love any help you can give me!
@corykylen5763 3 жыл бұрын
@Dayton Rowen instablaster =)
@daytonrowen4515 3 жыл бұрын
@Cory Kylen i really appreciate your reply. I got to the site on google and I'm waiting for the hacking stuff now. Takes a while so I will get back to you later when my account password hopefully is recovered.
@siniorgolazo 5 жыл бұрын
"It's like 35 degrees Celsius almost every single day for a week. It's terrible right here." [Laughs, then cries in spanish]
@CAPTONBEAST 5 жыл бұрын
I watched the whole video because it was actually entertaining and I think you did a really good job at managing your project while you made a video that is interesting enough to watch all the way through. Keep up the good work and I hope you can make more awesome videos!
@Timon2200 5 жыл бұрын
Very nice work. Not only on the project but filming was SUPERB! Congrats keep it up!
@nikodembartnik 5 жыл бұрын
Thank you :)
@sibonisomakhanya3797 3 жыл бұрын
Yah man pruvo
@palomaaguilar1589 4 жыл бұрын
This whole corona virus really making me wanna make a longboard
@leifv 4 жыл бұрын
Me too
@TijmenvdP 5 жыл бұрын
Your belt is slipping when you slow down because you probably have a cheap pulley kit from china which is usually 3m. You need a 5m belt and pulley setup. Also wider belt and pulleys is better since there is more contact area for the belt. Good luck!
@jakebozz7677 5 жыл бұрын
Superb, as always! It always amazes me how diverse your interests are and how your creations seem to have no limits on subject matter! Nice job again, Nikodem!
@michal199011 5 жыл бұрын
Ten projekt jest najlepszy ze wszystkich Twoich dotychczas zrobionych. Dzięki za podpięcie linków z częściami. Fajnie że regularnie coś wrzucasz :)
@darkkevind 5 жыл бұрын
Great effort! Well done indeed. One thing... your belt, not sure if you're using 3M or 5M (it looked like 5M), but it's skipping loads! So maybe just tighten the belt a little to stop that.
@nikodembartnik 5 жыл бұрын
Thanks! Yeah, I fixed it now, didn't had a screwdriver while testing :)
@MrBrunakis 5 жыл бұрын
Damn, you did a really good job
@isaaclyonsf1 5 жыл бұрын
Nice, I used similar electronics for my build, only I used a keda 190kv 6364 motor from hobbyking and two 3000mah 3s lipos in series. It has plenty of torque, and I have climbed 20% hills on it, and the top speed is limited by the esc to 20mph. It cost me about £200 to build.
@marlowerecoing-tallen3385 5 жыл бұрын
Probably the best looking eboard IV seen
@thomasandreatta2989 5 жыл бұрын
Hope you can read this comment. I was having same problems with an mpcnc, i was losing steps on y and x. I just solved by adding a bigger fan that blows on stepper motor drivers. With this solution i've also added 0.2V on vref on each motor. And now they work really good
@christophergrove4876 5 жыл бұрын
I'm building the MPCNC now and am planning on building the Dremel CNC as well. (for smaller projects at another location) This is nice to know!
@thomasandreatta2989 5 жыл бұрын
@@christophergrove4876 i just went crazy to understand where the problem was, so i hope this will be helpful to you and maybe also nikodem
@athermaqsood8309 3 жыл бұрын
Your projects are always cool :))))
@nikodembartnik 3 жыл бұрын
Thanks!
@tomgray7049 5 жыл бұрын
That was great. You did a fantastic job, as always. Love your creativity.
@redrob9561 4 жыл бұрын
for the ESC Substitute, did you use the 24 volt or the 36 volt? anyone know?
@arkanandrei6127 4 жыл бұрын
24v for the motor he's using
@LeviJanssen 5 жыл бұрын
Have you considered using a BLDC motor comparable to the one you use for the longboard as a 1 kilowatt CNC spindle? I've been contemplating the practicality of such a system, and would love to here your input. It seems like it would offer higher power with higher torque potentially for cheaper.
@Irwined 4 жыл бұрын
Can't wait to see more information on this project - spring and Covid have my family wanting to make one together. :-) Love your videos!
5 жыл бұрын
That's great how you tell story in this video - thanks to it this video isn't only a DIY instruction :-)
@nikodembartnik 5 жыл бұрын
I am happy that someone noticed that, I put a lot of work to go beyond making in my videos and that's how I would like all my videos to look like. It's really rewarding for me maybe not when it comes to views but it gives me a lot of satisfaction :) Thanks!
@rolfjunior 5 жыл бұрын
True! Maybe you need a bigger drive pulley, that avoids belt skipping and increases the maximum speed.
@AlpakaAntifa 4 жыл бұрын
I knew you were polish from the first second - very nice video! Nice editing skills!!!
@rklauco 5 жыл бұрын
I really like the music selection :)
@nikodembartnik 5 жыл бұрын
I wasn't sure if this kind of music would match this kind of video on KZfaq. Happy to hear that you like it, I love classical music!
@chalepeaddict 3 жыл бұрын
Holy shit... When I found the video on the INstructables, what I was expecting was faaaaaar different from what I saw. The project is absolutely stunning. We have to collaborate on a similar project sometime!
@guitarwi3rdo 3 жыл бұрын
Would have been nice to see how you made the pulley support for the wheel. Most eskate wheels have a core you insert the pulley into
@sealightube333 5 жыл бұрын
Great build! :) My advice to tighten more the belt, with this you can eliminated the annoying noise of the belt slipping and it will have better break force... :)
@nikodembartnik 5 жыл бұрын
Thank you! Yes that's true, I was really impatient, I wanted to test it as soon as I could so belt wasn't properly tightened
@cuel 5 жыл бұрын
Hey Niko, not sure if you familiar with Loctite, you should definitely check it out. its a liquid that hardens and prevents the nut going loose from the bolt. There are 3 or 4 types of strengths, the standard one is the blue. I use it in all my vibrations prone assemblies and it helps a lot.
@PracticalProjects 5 жыл бұрын
Really nice build mate, love the enclosure you've made there!
@nikodembartnik 5 жыл бұрын
Thanks!
@aaronesau9284 5 жыл бұрын
I had a thought about a motor mount, print the axle part of the truck with mount designed on it then cast it out of aluminum.
@smaugista6896 4 жыл бұрын
Od razu usłyszałem polski akcent. 😁 Polacy tak ładnie i dokładnie mówią 😃 pozdro kolego bardzo fajne wykonanie 👍
@Ty_Danty Жыл бұрын
Nazwa też jest polska
@Thomas_Simard 4 жыл бұрын
For having safer brakes you can buy a VESC, plus you will have more control over you acceleration and max speed. This make the skate much more smoother to ride. I had a similar esc before and it worth the upgrade. If you decide to buy one, you will need to buy seperately a remote, a battery metter and a switch.
@maarsls6695 5 жыл бұрын
Could you give me a link for your 3d printed wheel support? Thanks
@swow1234 2 жыл бұрын
This is really impressive. But this more of a manufacturing skill level already. Still, great job!
@NadavIgra 5 жыл бұрын
very nice, good job
@antonwinter630 5 жыл бұрын
cool project. nice design and solution to mount the motor
@mylesdrake4518 5 жыл бұрын
Great video. For cost effective battery, consider Hoverboard (aka Balance Board) Battery pack. It contains 20 cells of 18650 with a BMS, and outputs 20A continuous, it is a 10S2P setup, so 42v fully charged, roughly 800 watts of power. They can be found on Ebay (with Samsung / LG cells) for around 30USD. You can reposition cells for "slim look" pretty easily too. Amazing video. keep it up!
@StuckoTu 5 жыл бұрын
I have a similar project, but I don't know how to connect the charger to the battery. Do I need the motherboard of the hoverboard to charge it safely or there is integrated overcharge protection in the charger itself?
@nikodembartnik 5 жыл бұрын
I want to build my battery out of LG 18650 cells, I already have all of them and I will make 6S 3P pack, I don't have a spot welder so I need to figure out how to connect those together :) 42V is way to much for this ESC, I have a version that can handle up to 7S battery :( Thanks!
@StuckoTu 5 жыл бұрын
Nvm, just found out that the battery have BMS itself, so connecting the charger directly should do just fine.
@1313andrzej 5 жыл бұрын
Jak drukowałeś mocowania silnika to pomyślałem że lepsze było by zrobić je z aluminium a za chwilę cnc i gotowe
@xaviernicolasroye9017 5 жыл бұрын
Nice project... but did you do any calculations about your design? sharing such project with others without notifying residual risks about such design seems a little bit dangerous. For sure, you wear protections (not enough according to me) but what could you happen if something goes wrong on road for someone else :/ Do not forget CE safety rules for toy? vehicule?
@Okayler1337 5 жыл бұрын
This melody in the beginning ^^ A gamers day:O
@bastelmicha7931 5 жыл бұрын
Realy great Project !👍👍✔
@ekaintxute6850 3 жыл бұрын
Very nice work!!
@pokulan 2 жыл бұрын
Ładnie ładnie :D Też sie zabieram za podobny setup. Tylko spróbuję wydrukować odpowiednio wytrzymałe mocowanie silnika do traka i pójdę w lion 10s2p :D
@africans1968 3 жыл бұрын
Can you try to make a Bajaboard suspension system? love your channel
@sagesends 5 жыл бұрын
all the chattering sounds like you need to tighten the belt, it sounds like the teeth are skipping
@peterkelly00 4 жыл бұрын
Amazing video man. you are very talented and have inspired me to build one myself.
@turczyn2000 5 жыл бұрын
share some general details about creating 3d project for 3d Printer and CNC! :)
@kajetangrabowski366 5 жыл бұрын
Ziomeczka z polski szanuje bo z polski
@thomaskuhn9003 3 жыл бұрын
Use a high amperage vesc that esc substitute is limiting the power of the motor
@madladdan 4 жыл бұрын
Also, how do you charge it?
@pheenix42 5 жыл бұрын
Instructables robot shirt? Woo!
@draGTAgan 5 жыл бұрын
nice job
@maxsiebenschlafer5054 5 жыл бұрын
Insert nuts amazing work
@CuriousRiz 5 жыл бұрын
Very cool, great video. 🙂I've got to be honest thought, I don't understand what the difference is between an ESC and the ESC substitute you've used. The substitute seems to do so much more at a lower price point...
@nikodembartnik 5 жыл бұрын
I don't understand it too, that's how they call it, I wanted to be clear about that. Maybe it's because you can't use it as any other ESC for example for a drone and that's why it's called substitute. Thanks!
@jvrga6901 4 жыл бұрын
Podziwiam za zajebisty angielski mordeczko 😎
@maarsls6695 5 жыл бұрын
Please could you give me your 3d print stl's ?
@m3chanist 5 жыл бұрын
Next day and the weather is still absolutely shocking I see. Terrible, I'll just go back to trying to climb inside my electric heater now in dark, damp winter New Zealand. O, and a great project.
@tanisha.p.3665 4 жыл бұрын
Very hit project and your channel
@mikimarkus8690 4 жыл бұрын
Nie za małe te baterie do takiej elektrycznej deskorolki?
@ariolas9703 5 жыл бұрын
Which type of esc substitute have you taught? The 24V or 36V
@cekpi7 5 жыл бұрын
Was wondering the same, but i think it's 24V considering he used 2 11.1V batteries in series.
@nikodembartnik 5 жыл бұрын
Yes, I used 24V version but if you want you can use 36V one, you just need more batteries
@madladdan 4 жыл бұрын
Nikodem Bartnik Isn't the motor specced to 24V though?
@jappiemoto 4 жыл бұрын
How do you charge it because you made a solid case can you charge it with the esc or do you need to charge the batteries seperatly
@MastahFebby 4 жыл бұрын
It is possible use that remote control with Hoverboard? May you make tutorial for that? Sorry if i have a bad grammar..😅
@andreapalumbo6918 3 жыл бұрын
would it be possible to implement a braking system to slow down? and as I live in a particularly sloppy area, did you tried it out uphill already? for the rest very good project
@zanpekosak2383 5 жыл бұрын
If the couplers are getting loose you might want to try some blue loctite on the screws. If you want supreme power than use red loctite but be carefull since you cant loosen them ever again.
@rklauco 5 жыл бұрын
A bit simpler solution is to file the rod flat on the place the screw bites into it. Helped me, too. But filing the hardened steel lead!screw was no fun - next time I need to do it, I'll use angle grinder :)
@JustPlaneChris 5 жыл бұрын
I greatly reduced the vibrations from that spindle motor by balancing the cooling fan. It was VERY heavy on one side, I had to remove about a 2cm square section of the edge to balance it.
@pawel4066 5 жыл бұрын
Po angielsku radiator to heatsink. Radiator Po angielsku znaczy jeśli się nie mylę. Ale tak to odcinek bardzo dobry jam zawsze 😀
@paraschaurs 3 жыл бұрын
What about the brake system and which app you used for speed checking
@pavelhilser4880 5 жыл бұрын
How do you charge up those batteries?
@renestorm8533 5 жыл бұрын
Great build for that small amount of money and time. Keep going.
@madladdan 4 жыл бұрын
How is it maxing out at 13mph downhill?? It's a 1.8kW motor it should easily get to 20mph at least
@maciekm7953 5 жыл бұрын
Dobra robota 👍
@dobes.dominik 5 жыл бұрын
bro this is so great !
@nikodembartnik 5 жыл бұрын
Thank you :)
@patricka8474 5 жыл бұрын
Hi nice project I guess you have a problem with high speed, you don't have wire the hall sensor that make this typical noise
@ProjektHeld 5 жыл бұрын
Nice Project, i did the same but with bigger wheels to get over bumbs and stuff like that! It only cost me 50$!!! ;)
@christinecomstock2527 4 жыл бұрын
Nice job
@davidwhitt3299 5 жыл бұрын
Nice but I think it'll be better is put a another motor on it as it less strain on the motor as do both sides of the sideboard
@nikodembartnik 5 жыл бұрын
With this setup it's hard to do
@ILIKECYDIA 5 жыл бұрын
@@nikodembartnik back and front trucks instead?
@daatm2719 4 жыл бұрын
How much autonomy does it have ? Really important pls
@vultur9894 5 жыл бұрын
Cześć jestem bardzo ciekawy jak wyliczyłeś krzywiznę deski albo krzywiznę w kole deskorolki. Jesteś mi wstanie wytłumaczyć co gdzie mierzyć ? albo podesłać coś z czego mógłbym zczerpnąć wiedzy?
@nikodembartnik 5 жыл бұрын
Do krzywizny deski wziąłem coś prostego przyłożyłem do deski i zmierzyłem odchylenie od poziomu za pomocą liniki a krzywizna w kole to tak na oko dopasowałem i zadziałało :)
@ProjektHeld 5 жыл бұрын
Great work!
@_zarar_23 3 жыл бұрын
How much does it cost to build the whole board
@DanSteigerwald 5 жыл бұрын
Are the 3D files posted anywhere??
@superpixelgamer7775 4 жыл бұрын
Here you go www.instructables.com/id/DIY-150-Electric-Longboard/
@DanSteigerwald 4 жыл бұрын
@@superpixelgamer7775 Thank you!
@jurisozolins2168 4 жыл бұрын
Is there a charger for the battery ?
@portlyoldman 5 жыл бұрын
Why was the speed in MILES PER HOUR???????
@nikodembartnik 5 жыл бұрын
Because there was no way to change it in GoPro studio. I used my GoPro to record the speed and then I added this speedometer using gopro's app
@anraf1001 5 жыл бұрын
A może wymień sprzęgła na kłowe? Mają na ogół pewniejszy chwyt. Zamiast robaczków często jest klamra która obejmuje śrubę.
@joetke 5 жыл бұрын
By the way, weather forecasts state +40°C all along the next week... in France. I suppose that with your 35°C while ours are around 21°C on Strasbourg, you should expect more than 45°C in Poland... DRINK, DRINK, DRINK!
@mitchsterling3266 2 жыл бұрын
Thank you. You are amazing. I would be afraid to ride it.
@hugomg1000 5 жыл бұрын
hello, excellent project, a question, do you have the data of how much power does that esc support, can I use a more powerful motor?
@isaaclyonsf1 5 жыл бұрын
I used a keda 6364 190kv motor from hobbyking with my 24v version and it works fine. 20% hills and about 20mph no problem.
@amiyakumarmahanta4877 5 жыл бұрын
Nick.... I am having some issues with my longboard regarding staring torque.... And other stuff..... Can you help me out?
@esk8supply720 4 жыл бұрын
Love the video ❤️
@dimasdimas6480 5 жыл бұрын
Nice!
@stban147 4 жыл бұрын
How are the batteries recharged? Should I buy others? I don `t believe...
@Rashed_vlogs 3 жыл бұрын
What the name of the music what you use in test time !!!
@julesvandenbliek39 4 жыл бұрын
hi, good video. How do you charge those battery's? did you buy a charger, and if so, what charger?
@madladdan 4 жыл бұрын
Really nice build👍 What mileage do you get on it?
@przemekjarosz 5 жыл бұрын
Jaki jest przybliżony zasięg na tych LiPo?
@mitsossavv 5 жыл бұрын
Nailed it!!
@maarsls6695 5 жыл бұрын
When i want to drive, there is some clicking moice from the motor, but when i drive faster then it isn't here anymore. Whats the problem ?
@nikodembartnik 5 жыл бұрын
This motor is sensor less so that maybe a cause
@djvdberg1010 5 жыл бұрын
Very nice project, considering doing the same! (It's 30+ degrees here pretty much ever day :) )
@pewni61 5 жыл бұрын
kolego program zajebisty ale mam takie zasadnicze pytanie, moja czysta ciekawość ile masz lat?
@eranox 5 жыл бұрын
Hi, how do you charge the batteries? Do you have to take them away from the skate or you can charge them plugged?
@nikodembartnik 5 жыл бұрын
I actually replaced those batteries with DIY 18650 pack, video about that soon :)
@christophergrove4876 5 жыл бұрын
NIIIIIIICE!
@marcospiotto9755 4 жыл бұрын
What Voltage is the Single Motor Electric System Driver???
@AJB2K3 5 жыл бұрын
Nice work with the longboard. Auto Power on, nice! I have a question about the factory, why do the pipes go up and down so high?
@nikodembartnik 5 жыл бұрын
Thanks! What pipes?
@AJB2K3 5 жыл бұрын
@@nikodembartnik Where you were testing you longboard was a pair of silver pipes that ran alongside the road rising up in sections.
@nikodembartnik 5 жыл бұрын
Those pipes :) those go up so that the truck can drive to the companies there
@AJB2K3 5 жыл бұрын
@@nikodembartnik Oh so they are entrances. Thank you, the architect in me always get attracted to these things.
KAMi JUINs
Рет қаралды 40 М.
DIY esk8 Builders
Рет қаралды 17 М.