Hope it can help in some way! Thanks for watching.

Thanks so much glad it helped!

Glad you enjoyed it. If you have any questions I'll try to help anyway I can Thanks for watching 👍🏼🙂

🤣🤣🤣glad I could entertain ya. Hope the video helped in some way. Thanks for watching!🙂👍🏼👍🏼👍🏼

Awesome hope it helps. I'm not the greatest but if you have questions feel free to hollar back at me🙂👍🏼

Thank you Kind sir. I appreciate you. Glad the video helped ya.

in the video at 43:04(the firman generator) is the washer your talking about fiber or rubber@@chrisdixon2525

Hope the video helps! Thanks for watching 👍🏼🙂

Glad it helped ya out. Thanks for watching

@@chrisdixon2525quick question. My battery took a hit from me trying to start it 30 times without it starting before I cleaned it. If I leave the generator running for a hour or two will it recharge the battery? I have a pull start on it to. But I started it with a portable battery jump. I don’t have a slow charger right now but was wondering if i just left it running will it charge up the battery again. Thanks

It may help a little Probably won't fully recover without charging on battery charger.

Thanks for watching and the comment 👍🏼🙂

I guess over time it might. I try not to soak the tip just wipe it off. I've never had a issue with the filters I use.i guess there's potential if the filter was super restrictive. There usually is a small filter in the on off valve but I didn't pull this particular one apart. Fuel free flowed freely when I had it apart. Thanks for watching. I'm not a certified professional mechanic. But I do normally end up with a pretty good repair. I do appreciate your feedback 🙂👍🏼

Hope ya enjoyed it. Check back often for more. Thanks👍🏼🙂

@@erichook1519 Thanks ! I wouldn't chance putting the gas in anything else. I believe the filter housing has 3 screws.2 nuts that hold the carburetor. And one on the back side.

Look up on Amazon carburetor gasket kit for 439cc clone engine. If yours is exactly like the one in the video. Should have a decal telling engine size. Should get multiple gaskets in one kit for like 10$.

Local parts store have different thickness of material for gaskets and you can make one

Hope it helped 😊👍🏼

Yes sir, I did it just like the video, thank you very much

You're very welcome. Keep watching 🙂👍🏼

Yes sir.

Question 🙋🏻‍♂️ What kind of oil can I use for this generator?

Good observation sir. I realized it when I put the new clamps on. It was right when it left my shop. Easy to do when ya trying to make a video instead of concentrating on the work. 😄👍🏼

I just take the fuel line off the carb. And drain old gas out of the tank. I spray carburetor cleaner in the tank and attach an old piece cloth to a wooden stick or dowel rod and wipe the interior of the tank as much as possible. Pour a little gas in and swish it around and drain it. Repeat until tank is free from rust and crud. Install inline fuel filter between tank and carb. Fill with gas and change the fuel filter as needed . Hope this helps. Thanks for watching. Stay tuned for more helpful videos. 🙂👍🏼 If ya need more help, let me know. I'll make a video to help ya.

Thank you. I’m planning on trying to run off propane only so I don’t have to do this as often.

No problem Yes I agree on the propane. I haven't tried mine on propane yet but I'm ready to try it

Went through all the steps and generator still won’t start (propane only). It cranks and just chuggs but doesn’t run. Any tips on what to try next? Spark plug maybe?

@@BT-bx1un so it runs good on propane ?

Around 35$-45$ on Amazon. Just search model# of generator on Amazon.

I did buy it. For $40 delivered I’ll save myself an hour of time. Thanks for the video, I’ll use it on the install and then play with the old one to have as a backup

I did buy it. For $40 delivered I’ll save myself an hour of time. Thanks for the video, I’ll use it on the install and then play with the old one to have as a backup

I don’t know why that posted twice

🤣👍🏼no problem

For the carb

I don't have parts for sale. Just look up what you need on Amazon or Google it. Thanks for watching.

No worries I have all the gaskets and plastic part of or for the carb Ty for this video

Meant order as in placement

My bad🫤 If ya can't figure it out get back with me. Sorry. Thanks for the sub.😊