Thank u soo much sir. That was perfect idea .I had lotof problem to crush my rocks stone, now I see ur video men u give me big hope .u did weak me up with ideas, thank u again.u are master . I have lotof gold my rocks didn't know ur ideas, 😊men I am glad I watch ur video.

I've been trying to reduce small amounts of different coloured bricks, rocks and stone to make cast concrete stone blocks. A simple solution which I would not have thought of, thanks for sharing

I appreciate the knowledge and the information sending blessings tenfold back

I dug a hole with a post hole digger, put a coffee can in (not as sturdy as your utensil holder), jammed a couple of rocks between the hole and the can to hold it steady, and that worked to stabilize it. I had been using chains on a paint stirrer but that isn't working well enough so I'm buying the grinder head and the dog dish. I cut the shaft on the paint stirrer for more stability. You can take the container right out of the hole and pour it wherever you want. When the container gets chewed through, buy another!

That could work very well on a large drill press with a shorter rod. a place to bolt it down on the table, clamp the lid on, and added power of the press. That would be the cat’s arse, for grinding.

Best DIY rock crusher I've seen so far! Awesome man! Wish I had that much gold ore lol.

Great idea! I made one today for my husband using your lesson. I like the way it turned out. Easy enough for a wife to do even! Thank you!

That's a fantastic idea! After perusing the various fab and angle grinder pseudo impact mill constructions, I came back to your cup wheel idea and think it'll do the job for my needs. I'm trying to flake and powderize anthracite for much different purposes but on a backyard DIY budget. I have a few 'previously projected' stock pots, though I think I'm going to go old pressure cooker pot that at one time turned into a pressure vessel for degassing for the thicker walls and the gasket. Just wanted to come back and definitely add a kudos for the idea! 👍

Thanks Duwayne & Jeff, it gives me ideas, I have already ordered a Pulverizer identical to yours, it's called a Grinding Cup Disc Wheel from eBay with tax $23.66 delivered. I will use the one I am going to build with a Rotating Rock Hammer. Thanks for the video.

Seems to work weld a couple of metal bars like they use on fencing or rebar in a square shape around it. Then drop the bucket with square welded pieces of rebar into a square shape and it won't spin done deal

Well done, amazing work!

Thank you! This is exactly what I need... Gonna make one now

Try bolting the pan to a board and stand on the board and it should be better.cheers for the idea!

Looks like it worked pretty good...two suggestions, 1) Cut your threaded rod in half...lenght would still be enough to do the work, and a shorter rod would give you less flexibility, less chance of the rod to buckle or bend, possibly even snap, and shorter would be stouter. 2) Find a way to make your stainless steel bucket stationary...not using your feet...save you some possible pain and embarrassment in the future...other than that, I liked it and will subscribe!

Nice! Thank you for sharing

That's a good start, thank you for sharing.

thats an amazing idea ..

thanks for the idea.

Pretty ingenious. Looks like the hole in the dog's bowl will chew out fairly smartly, but I imagine you'll solve that.

i love this. thank you for sharing

nice invention, stone pot's for make stand on the land lavel means sheaking stone one place a living

nicely done

genius! thank you.

This is a wonderfull idea! As it is shown in the video its a bit slow even compared to crushing rock in a metal tube with a hammer or a pestle. Also the ammount you can crush at one go is a bit small even compared to a mortar and pestle. But by now you most likely have worked those kinks out im sure. After all this video is two years old. Very nice indeed. I will give that method a try for sure.

thanks for the concept its cheap and I can actually innovate that idea thanks

Well done.

I enjoyed the video! Keep it up!

a cheap tabletop drill press might be nice

This works great for Hard but Granular Rock like Quartz, but not so good for Shale, Schist or Dense Sandstone. It does work but takes forever and the Nut tends to hang up on the Rocks in the Middle causing the bit to spin without cutting.

there's always room for improvement, but you did a great job under a minute. And I suppose you could put that same powder stuff back in there and grind it even further. That sounded like a hammer drill? yeah you might want to put a tube around your threading just in case it breaks. And I suppose you could put a shorter rod on it too, and built on to a countertop. Great idea though. I wonder how long that head last list real hard rock like quartz? thanks again

Great idea using a grinder wheel. Pour yourself a slab using the stainless to make a hole and embed a few hooks or latches to secure the lid. I see crap flying everywhere and it's killing me. That will also protect you incase a stone rips through the side of the stainless which one eventually will. As for using a shorter threaded rod I don't agree. I'd say maybe a black steel pipe with grease inside or something similar to support the bending/flexing. You don't want to be leaning over doing this all the time with a shorter shaft. There has to be some sort of bolt on flange out there to solve the nut binding issue. I was using a think stainless pestle with a pipe stuff in it and another pipe with a welded end as a ram rod but the pestle had a blow out today so looking for an alternative. Might try this. Thanks

How long before it chews through the pot? You need an sds drill with chisel action, and get a hammer head made for it.

The same heads are under $10 on Amazon and work fine!

looks like a good idea but somehow preventing it from spinning would work much better but as you mentioned. thanks Ron

truly a genius

Great innovation

Interesting DIY project. I swear you sound just like a friend of mine from Weatherford Texas GD

A c clamp , vice, or large pipe wrench might hold the base well.

gotta pan your floor after that😂 but I liked the result, nice powder

Neat! I wonder if you could rig it up on a drill press and a stronger/thicker steel cup for a little more safety

That would work great in a drill press

Really nice. 👍

I used a long anchor bolt and a oxy tank lid and slip fitting it powders it but……. It that drill binds up it’s gunna take your arm for a twisted trip and mess u up. I know from experience. Yes it works but at a price

yea 2 nuts backing up the rod sound right to me lol. dont spin it to hard you dont want to break it there. yea i guess grindin is what them ladies tend to call it these days. if you listen close it sounds like a backwood dentist working on billy bobs teeth. hey great info thanks man! i like it!

Haha! Very clever! Nice one

Clever - by using Carbide bits which is harder than rock to crush them - Clever

Nice.

Shorten up your all thread a bit. Ever tried it on a hammer drill?

This man is living in a non-Euclidean space.

Great now you scared my pet rock.

I think that is pretty ingenious. How long did it take to grind the 4 rocks in the container? I think you said the electrical fitting was 1/2". But 1/2" would not fit over the 5/8 all thread would it? Would the elec fitting be 3/4" instead of 1/2.

What I'm trying to figure out is where to get even low grade gold ore I live near golden NM so I'm sure there's gold mines within 1oo miles but they don't exactly like to sell or give orre out so I'm still researching

Putting it or setting it up on a drill press would be the go

Put your foot on top of the dow bowl when using it to stop it from bouncing round

That was fun! How much gold you think you lost blowin out on the driveway?

Try bolting the CAMERA to a board and work separately......(tee here!🤣🤪)

Watch out! I am afraid about your long rod might fail on some unexpected tension and that's might become dangerous for your lower body parts....

nice

getting drunk by looking this vid

Will make one ,beats a hammer

Diego

Stand on the thing dude

Приветствую. Подскажите пожалуйста что за круг? За ранее спасибо.

Why is the back ground shaking?

Holy Shit Son...This is a good idea...

Ótimo! Depois mostre como vc arrasta o sofá para mudar a arrumação...

cement that bucket in the ground

I like ya thinkings pilgrim .. or mr oak ..😁pip pips and carryon

What about for crushing turquoise and similar stones? Does the diamond bit spinoff into the stone powder? Eh who cares ?

What do you call that wheel crushing the rock

Hello Gold matkap taş kırma makinası

Thanks all for your comments. Much appreciated. I have taken them into consideration. Just be safe folks.

Please wear a dust mask silica dust is no joke.

that's super dangerous.. when that all thread snaps and bust open your leg or foot. you'll wish you never did that..

Idk how to tell you this but it looks like your camera might have had shrooms an hour beforefilming

S a n d

We don’t need to know you’re gay and have a “partner “ and they make a portable rock crusher. And there’s untold dozens of old fools reinventing the mousetrap all over KZfaq

Yeah nah. Haha

What The hell is wrong with your camera

You must love Jehovah your God with all your heart and with all your soul and with all your mind and with all your strength. You must love your neighbor as yourself. Jesus the anointed is Lord! Repent and be baptized and believe the Gospel.

What a horrid camera job. Put the damn thing down man. This vid will give you a seizure it moves so much. Cool little crusher though.

Ridiculous contraption. You could have pulverized the fuck out of that ore with a regular pestle and mortar rock bopper or a pneumatic hammer attachment in less time with way less work creating the tool and way less danger to yourself.

Is this an April Fool’s joke? Have you tried granite? It would take a month to produce a few kilos ☺️