DIY: How to Install D2S HID Bulbs | Infiniti G35/G37 Sedan & Coupe (2007-2014 Models)

Рет қаралды 280,999

Күн бұрын

In this video I will show you how to replace the factory D2S HID bulbs with an aftermarket D2S or D2C (universal for D2S & D2R) bulbs. This tutorial will work with 2007-2014 G35/G37 sedan & coupe models. This video will help and give you an idea of the installation process. Buying your own bulbs and installing it yourself will save you a lot of money by avoiding the dealer's service center, which will charge anywhere between $150 - $200 for parts and labor. If you're watching this video on a cell phone, in the bulb comparison scene the Morimoto bulb is on the driver side and the eBay bulb is on the passenger side.
Installed: Morimoto XB35 6000K D2S HID 35w/55w bulb
Headlight Bulbs | Morimoto D2S XB
4500k: amzn.to/41x2MRb
4800k: amzn.to/3EJPQhg
Backup Light | 921 LED Bulbs:
Amazon: amzn.to/3Yb8jdk
License Plate | T10 LED Bulbs:
Amazon: amzn.to/3Z2PXfU
WeatherTech Window Visors for G35/G37 Sedans:
Amazon: amzn.to/3Y6rXao
Disclaimer: I am not responsible for any damages or warranty voids for vehicle if it occurs. If you do not have any car experiences please do not attempt this and have a professional install it for you.
My Filming Equipment
Camera: amzn.to/3ItWlWk
Lens: amzn.to/3ZoNtbB
Tripod: amzn.to/3EJP4Rr
Ring Light: amzn.to/3xYiuY1
#infiniti #G35 #G37 #HID

Пікірлер: 205

@davidhall1765 3 жыл бұрын

Freaking genius! Just kept me from screwing around taking off my bumper, taking out headlight assemblies, etc. just to change a bulb. This should be top hit of any G37 youtube search instead of all the “look at my cool new aftermarket headlights” videos.

@princebeerus7031 7 ай бұрын

Bro has the most clear and non complicated explanation I’ve seen all day. Def earned the sub and like

@sidddle 4 жыл бұрын

Total quote= $270; actual cost of fixing myself watching this video = $30; satisfaction = limitless!

@niclacoste 4 жыл бұрын

Siddharth Vadodaria I literally burst out laughing when my dealer quoted me over $200 to replace “light bulbs” then I went home ordered the bulbs online and filmed this video lol

@atinderpalsingh1 4 жыл бұрын

Siddharth Vadodaria what id the part num for bulb

@Blassie.P Жыл бұрын

They told me 200 aswell

@siphax399 Жыл бұрын

@@niclacoste where did you order them from

@MM10215 Жыл бұрын

They say 200 and when u leave they do what he doing rip off

@sharlab361 3 жыл бұрын

Thank you for your video. I was able to do it all by myself. Removing the little house wire was the tricky part. It’s hard to explain how to move it. But I got it. Thanks again.

@DRT2OILFM 5 ай бұрын

2024....and this video just saved my some money on my 2008 G35x S =]

@svenskhet8688 2 жыл бұрын

Just purchased the bulbs and will be doing this tomorrow! Thank you for the very clear and concise instructions!!!

@moniererichard4391 Жыл бұрын

How bright are these bulbs and do you like the look

@MercDiggler 9 жыл бұрын

Thanks. Used to install oem light but tutorial was really easy to follow. The clips actually weren't my issue. The ballast was, but all good.

@arnoldpesina6405 2 ай бұрын

Watched this vid 3.5 years ago to do it, and here I am again 😂😂

@noushinmahmoudi9865 7 жыл бұрын

Dude I love how you did your video! thanks so much. subbed!

@Emoney559 2 жыл бұрын

Imagine a mechanic telling you " going to need to remove the bumper for this 🤦‍♂️🤣thanks man, I really appreciate you

@aidancoggins534 2 жыл бұрын

They told me the same lol it’s only required for the whole headlamp assembly.

@velikipalachinke 5 жыл бұрын

Hey thanks for posting this. It was really useful.

@tooreal7826 4 жыл бұрын

Thanks just did my mom's car great info save her time an money

@raymondtr23 3 жыл бұрын

Saved me from removing bumper! 🔥💯

@liquidzep 10 ай бұрын

One helpful tip that I learned is to use some painters, tape and tape the lamp spring clip up and out of the way before inserting the new bulbs

@zane8313 9 жыл бұрын

Thank you so much for your video. Just had it done today. My back hurts though.

@niclacoste 9 жыл бұрын

Nice! What's the brand of your HID bulbs?

@zane8313 9 жыл бұрын

Niclacoste I bought the 5000K Sylvania SilverStar, very nice bulb!

@talaveraf1 8 жыл бұрын

Thanks for saving me money lol, will be doing minds this weekend!

@MrRobertjparsons 2 ай бұрын

It really helps to remove that wheel first (use block or jack stand) or at least turn steering wheel towards the other side.

@flowjiggy706 Жыл бұрын

This video helped me out pretty good..

@stephencannon3140 4 жыл бұрын

I can see where removing the wheels will make it a lot easier for install, especially the first time.

@Godistheonlyway9319 Жыл бұрын

thanks alot for everything. God Bless you

@renzogatlin9060 2 жыл бұрын

This was a great fkn help, I almost took the whole damm bumper off B4 I watched this 👍🏾👍🏾😎

@roygetem 2 жыл бұрын

This video just saved me a huge headache 🙏🏽

@celiop6999 11 ай бұрын

The most important, you didn't show. Removing the bulb😮

@rphoebus 8 жыл бұрын

Thanks for posting this video. The dealer wanted $439.00 before tax on this repair. Ordered the bulbs through your link. Hope it makes you some money that way.

@niclacoste 8 жыл бұрын

Thanks for watching! I'm glad I was able to help. It's really easy to replace but requires a little work to get access to it. I don't make any money or commission for recommending the bulbs, I just want to help G owners save money.

@ohjayp7936 6 жыл бұрын

thank you, made it look super easy!

@germando81s 2 жыл бұрын

Thank you!

@Woohchaiell 5 жыл бұрын

My "inexpensive" mechanic wanted to charge me $120 for 1 bulb and $90 for labor. I would have spent over $400 to replace two headlight bulbs. I spent $89 on a pair of Osram Xenarc CBI D2S and it took me 1 hr to change out both. Didn't need to take off the tires either. I'd suggest using nitrile or latex gloves when handling the bulbs because yes it will be a little difficult to squeeze past the panel but wearing the gloves ensures that you won't accidentally touch the bulb and get your hand oil on it, plus less risk of dropping the bulb if you're wearing latex/nitrile gloves

@niclacoste 5 жыл бұрын

Angelica Suarez You should be able to find those plastic push and lock tabs at Autozone or any car parts store because they’re commonly used.

@xMikeDezzyx421 4 жыл бұрын

Iv done this before but the OG way by removing the bumper but never tried it under the front finder. So I decided to leave the tire on as well it was pretty hard at first but I just took my time and everything came off pretty easy, plus my car was hot as hell cuz I was sending it 10 minutes before installing the bulb.

@persianempire5417 4 жыл бұрын

Hi I had a quick question, so I trouble opening the cap on the light...it seems stuck, any ideas how I might be able to open it?

@osvaldovarela1594 7 жыл бұрын

Do you by any chance know how to adjust the projector? I have an 08 g35 sedan!

@def8017 9 жыл бұрын

Wanted to add a WARNING. If you have never done this before, you will probably want to go ahead and remove the tire so you can pull the liner down and actually see what's going on inside the headlight. If you only pull the edge of the liner down, you will be working almost entirely by feel. That's okay if you've done this before but, if it's your first time you can get really hung up trying to figure out how to get the clips on and off or feel when the bulb actually lines up and slips into place. WARNING ... the metal clips that swing up and down to hold the bulb in place fit into slots at the bottom of the mount. You have to squeeze them together and push down toward the bulb to get them in to or out of the slots. CAUTION ... the slots are made of plastic and the top section of the slot WILL BREAK if you put too much pressure on them. And "too much" means not much pressure at all. DO NOT pull back on the metal wires trying to get the clip out of the slot or push down too hard trying to get the wires into the slot. This is a major reason for taking the tire off and getting a really good view of the layout and what you are doing.

@niclacoste 9 жыл бұрын

The only reason I didn't remove the wheel is because is my car is lowered and it would mess up my alignment. Otherwise unless you have a jack removing the wheel does make the installation a little easier. Thanks for watching! 👍

@godzshadow9001 6 жыл бұрын

This helps!!

@laceyforrest5799 5 жыл бұрын

@@niclacoste liked your video alot and i subscribed as well. I just wanted to tell you that removing and replacing your wheel will not change your wheel alignment. Just fyi. Great video! Thank you.

@adroitus 4 жыл бұрын

Duane is right, removing the wheel and pulling the wheel well liner would have made this video great. As is, this video is helpful, but I really wanted to see what was inside the headlight assembly.

@sharpaf310 3 жыл бұрын

I concur. Def was difficult doing by feel. Got it done tho

@sny714 7 жыл бұрын

I bought these for my 07 g35x. they are much brighter and have a pure white output(5500k), BUT, they do flicker then turn off. I contacted morimoto and they said the bulbs might require more power than the ballasts are putting out, and recommended changing ballasts. So in the end it's frustrating. I figured i would get a different bulb to replace a dead one. I wasn't looking to upgrade the ballasts too. Be wary when buying these bulbs. I doubt my car is the only exception to these not working well. **I did use this video to replace the bulb though. Last time I changed a bulb I took the wheel off so knowing I didn't need to was nice. Thanks!

@paulbabajan6668 7 жыл бұрын

Steven Valle mine had the same problem the go on and the flicker then shut off after a min or so

@vqdrew1171 Жыл бұрын

Does it still flicker after getting new bulbs ?

@bronson6813 3 жыл бұрын

Thank you

@KidFrizMRFIXIT 3 жыл бұрын

Thanks you

@Jayztunning 7 жыл бұрын

thnxz 👍

@nixonsktr 9 жыл бұрын

Can you access the fog light bulbs from there ?

@28noles Ай бұрын

Appreciate you just was about to pay someone

@585sammy 2 жыл бұрын

Thanks

@jayfruge3536 4 жыл бұрын

One correction brother. That was not the ballast. That is the igniter. The ballast is located under the assembly.

@11Greenmonkey 9 жыл бұрын

hey man, sorry I have another question... what line out if the headlight is the indicator line?

@gurjotsingh6754 8 жыл бұрын

Is this the same for fog lights?

@francesmartinez8848 5 жыл бұрын

I have a question... do the grooves on the black part have to exact to the Phillips?

@jeansandmyshirt 3 жыл бұрын

are they day time running lights built in the d2s bulbs or its a seperate bulb?

@Xcepticus 2 жыл бұрын

Thank you so much for sharing this helpful DIY headlight bulb change on the 2008-14 Infiniti G37 x sedan/coupe. 🤝 I just purchased a pair of LED "Alla Lighting H8 H11 LED Fog Light Bulbs or DRL 6000K Xenon White, H16 H11LL H8LL H1155 2800 Lumens Xtreme Super Bright 5730 33-SMD 12V Replacement" on Amazon. Watching your video will save me labor fees at the auto mechanic. 🧰

@frankiegarza3002 2 жыл бұрын

I got some white LEDs for my parking lights and some led fog lights what Kelvin are your HIDs and where your fog lights on at the end of the video??

@Emoney559 2 жыл бұрын

Do you have a video of removing the navigation screen section?

@rootsdat 7 жыл бұрын

I just realized i have a burned ignitor with model 1 307 329 076 that came with vehicle 2007 GTI . Will 5DD 008 319-50 ignitor work for my light. My question is are the compatible with each other. Interchangable? Thank you

@everest0411 8 жыл бұрын

Hi, I have a quick question....... if my car is originally using Halogen light bulb....how can I change to Xenon Fusion light bulb? Haw many things do I need in order to do the conversion?

@BRTSTL05 9 жыл бұрын

hello can you upload a video on how to remove the headlight assembly

@vahagndilbandyan4021 3 жыл бұрын

Is the g25 replacement similar to g35/37?

@jaredhan1875 4 жыл бұрын

Are headlights for the g35x 2008 sedan the same for a 2009 g37 sedan?

@Keomotive15 3 жыл бұрын

Can you replace the middle small interior bulb do it this way?

@litesaber54yi3 8 жыл бұрын

hey. i have an 2008 infiniti ex35 which looks to have a very simmiar head light assembly. the issues is that i installed new halogens in my car and after completion and starting up the headlights the lights are completely misaligned and are throwing off no light at all. how do i fix this! is there an alignment screw? or some other way?

@christianleduc9222 9 жыл бұрын

I was looking for a video to replace one of my fog light/drl on my 2009 G37 sedan that are into the headlight like yours. I didn`t found what I was searching for, but your DIY is verry clear and helpfull cause my car have almost 200 000km so I will probably have to do it too in the future ;) Only the part with the clips that I'm not 100% sure about, but it might only be because I'm french and I don't understand English perfectly. Do you know how to replace the fog/drl on a 2008/2009 G sedan ? But Thank you for this video, I just suscribed :)

@niclacoste 9 жыл бұрын

Thanks for the suggestion! I'm going to make a video on how to replace the fog light bulb that's built into headlight housing soon.

@brittinerodgers2429 8 жыл бұрын

hello I have a 2007 nissan skyline my right light is not turning on.the big one I saw you change in the video. I have led lights there a purple color 30,000w..I don't know what to do. But you think when I drilled 3 holes at the bottom of my lights to get the water and fog out the lights i mess up something in there. am so lost

@bda7dd30 4 ай бұрын

Niclacoste can you use any kind of bulbs like auxbeam or does it have to be this brand

@chris14388 Жыл бұрын

Is the other bulb next to the HID a D2S as well? Both my bulbs are burnt out on my passenger

@alexcodreanu2985 3 жыл бұрын

Hey im looking for a replacement bulb for the top corner light on my 2008 infiniti g35 sedan do you have a link?

@Wearefucked 8 жыл бұрын

I am currently using the Phillips oem bulbs , and I want something brighter

@Dtchman 9 жыл бұрын

Hey I drive a M37x and like you I am a DIY type person cause I know the dealer will rip me off for stuff like this. I have been looking for instruction to replace my front side marker but I cannot find anything. However I think your video will be very helpful. hopefully it gives me clear access to change the bulb and all the other bulbs on the cluster as it did the headlight. thanks.

@niclacoste 9 жыл бұрын

Dtchman M37s are nice! Sorry I wish I could help, but I don't think it should be that difficult to replace the side marker. Are you swapping out the current bulbs with LEDs? Thanks for watching!

@bronson6813 3 жыл бұрын

Can you make a video how to change the fog light and parking

@lara94080 6 жыл бұрын

I have a 2008 infiniti g35 sport and my driver side light bulb went out I bought 2 hids installed it and it wont work i tried the 2 new ones and the old buld on the passanger side and they all work everything works on the driver headlight except the high and low beam wich is the same bulb any help would be great and dealership said i need the hole headlight would cost me 1500 for one thnks

@darrellwoodie7769 Жыл бұрын

Does the bulb have to be completely replaced to work?

@rssonepr1 8 жыл бұрын

Can I get access to change the fog lights through there?

@zebasrod 9 жыл бұрын

Could I just put these bulbs in my Maxima?

@farukyou88 9 жыл бұрын

Good info but would like to add or fix that it's not the ballast that you removing,it's called igniter.:)

@realmadridFS7 2 ай бұрын

do these work as high and low beams?

@kmxtornado 7 жыл бұрын

Is it just the video quality or does the Ebay bulb appear to have the exact same performance as the Morimoto one by TRS? What's your opinion having seen them in person?

@niclacoste 7 жыл бұрын

kmxtornado The quality of the Morimoto bulbs by TRS is significantly better than the generic eBay bulb. The light output of the Morimoto bulbs is also brighter than the eBay bulbs. I no longer have this vehicle, but recently installed Morimoto D4S bulbs in my new car and I'm very satisfied.

@nighthawk0077 Жыл бұрын

On mine the ballast is a seperate unit held in by 3 screws. Maybe you meant igniter?

@familyofgaming1792 9 ай бұрын

How do I replace the day time running lights on this car? G35 2008 sedan. Can't find any information and I don't want to mess anything up

@11Greenmonkey 9 жыл бұрын

is it possible to do this to a 2004 g35

@bmaca51 9 жыл бұрын

Really great video. Dealership tells me that my ballast is bad, they aren't sure about the bulb. Can you recommend a source for reliable ballasts that will work on my 2007 G35?

@niclacoste 9 жыл бұрын

bmaca51 The two links I'm giving you sells OEM Infiniti parts. One of them is the actual Infiniti online parts store and the other is an authorize retail store that sells only Infiniti parts. Link 1: parts.infinitiusa.com/ Link 2: www.infinitipartsusa.com/

@masmas5191 8 жыл бұрын

Hallo I need for installer for chrysler T&C 2007 hid

@jacksondubois9475 Жыл бұрын

Was it like this both sides ?

@Theboymichaels 4 жыл бұрын

What kelvin are your city lights and fog lights ? Also are they LED ? I love how they match gives the car a more modern look

@niclacoste 4 жыл бұрын

Falsetto_prince They’re 6000k. I have the link to the T10 led bulb in the video description. You can use it for the license plate light too.

@vqdrew1171 Жыл бұрын

@@niclacoste link ?

@geodumbmoney593 4 жыл бұрын

Did you have to re aim your headlights after installation or any problem blinding oncoming drivers?

@niclacoste 4 жыл бұрын

Giany laguerre No, because this is a direct replacement of the oem bulb. The car already comes with HIDs so you don’t have to re-align the headlights unless your current beam projection is either too high or too low.

@Bmac2324 Жыл бұрын

How did you put the bulb back in

@MarveousZero 2 жыл бұрын

How do you take the clip off

@MRWONGISBACK 6 жыл бұрын

But how do u switch the drl bulb

@DaBrodyy 9 жыл бұрын

Do you know what type of bulb is used for the front parking light? Please and thank you.

@niclacoste 9 жыл бұрын

It uses a 198 or T10 wedge bulb, I replaced mine with a 6000K T10/198 12SMD LED bulb. You can buy it on eBay. Make sure not to get the LEDs that extends out too much because that area is kind of short.

@tdpieper74 8 жыл бұрын

Curious, I will buying a 08' G37 soon do these cars already have HID light or did you have a conversion kit prior to getting those D2S bulbs?

@niclacoste 8 жыл бұрын

It comes with stock Bi-Xenon HID system, which is 1000x better than a traditional halogen bulb. Almost every Infiniti 2008+ model comes with stock HIDs.

@tdpieper74 8 жыл бұрын

+Niclacoste The quick response is greatly appreciated. Watching your video was very informative as well, thank you.

@bronson6813 3 жыл бұрын

D2S is for infinity g37 2009 sedan please let me know

@NjBoriG35 2 жыл бұрын

How do I know the difference between a bad Ballest or bulb

@krama017 2 жыл бұрын

I'm really hung up on knowing whether I have xenon or not on my '12 ex35 (basically hatchback version of the same car)...any tips?

@alexfeole6212 2 жыл бұрын

Get on diodedynamics and put in your vehicle info and it’ll pop up everything you need that’s what I did and the hid bulbs are only $40

@JoseRodriguez-si2nj 4 жыл бұрын

Does anyone know if a bad bulb would make low and high beam turn off, or is it the ballast?

@niclacoste 4 жыл бұрын

Jose Rodriguez When was the last time you replaced the bulb and is happening to one side or both?

@blockobutter 4 жыл бұрын

What size tires are that???

@Con25100 9 жыл бұрын

hey bro, how are those bulbs holding up after these months? looking to get them

@niclacoste 9 жыл бұрын

They're pretty solid. No issues since uploading this installation video.

@Con25100 9 жыл бұрын

+Niclacoste OK great. going to pick them up

@Trix-ur8xt 2 жыл бұрын

Which way do I pinch it

@anthonyricci8013 9 жыл бұрын

Is this the same process to change the FOG lights too? I have a 2010 G37 and want to replace them. Thanks-

@basstravis 9 жыл бұрын

Anthony Ricci No, fog lights are standard halogen bulbs much easier...just twist and the bulb comes out...you do replace thru the wheel well though, as you do here.

@lafenorton7529 3 жыл бұрын

Kinda wheels you have??

@poohsito78 8 жыл бұрын

thanks for the video. What was the music at the end of the video? really like it!

@JesusAvila-qe9zr Жыл бұрын

purchased infinity without a bulb on the left side and I just bought a bulb but it’s not clicking into it somethings wrong the bulb is for the same model it’s something els😞

@JimmyJohanes 7 жыл бұрын

so d2r/s/c has built in ballast inside car from factory? no need to buy another ballasts?

@niclacoste 7 жыл бұрын

If your car comes with a built in ballast (D2R, D2S, D2C) aka Bi-Xenon HID headlights then you just need to buy the HID bulb designed for your car. In my video I only bought a D2S HID bulb, which is cheaper than an aftermarket HID kit. Don't buy any bulb higher than 35W or the maximum wattage allowed for your ballast.

@JimmyJohanes 7 жыл бұрын

ok thanks mate

@rauljimenez3138 3 жыл бұрын

Yea you right 120. For a light bulb

@zehuilin6114 8 жыл бұрын

hey, Niclacoste, I got little confused i went a shop they told me that my infiniti G35 is not able to adapt to the HIDL so they recommend me change it to SYLVANIA 9003 (also fits H4/HB2) SilverStar zXe High Performance Halogen Headlight Bulb, and charge me 120+for the bulbs, but the same one on amazon only cause like about 50+. Is there any reason behind this or they just want to rip me off?

@niclacoste 8 жыл бұрын

+Zehui Lin What year is your G35? Because only 2007-2008 G35 & 2009-2014 G37 Sedans have stock HIDs. The older model G35s don't have HIDs, which is why they recommended you those types of bulbs.

@zehuilin6114 8 жыл бұрын

+Niclacoste 2005

@Teekly 9 жыл бұрын

Will this fit on a 2005 G35 coupe?

@just_a5.7 6 жыл бұрын

bakkso 😂

@ogden3067 9 жыл бұрын

Are you sure the 3five bulbs work?

@niclacoste 9 жыл бұрын

Yes, a lot of people on the myg37 forum uses that bulb and I've had no problems with my XB35.

@TmoneyTatted 4 жыл бұрын

I cant click the link in the bio for the 6500k bulb it just takes me to amazon.com ):

@rogerlee6289 7 жыл бұрын

Hey even you got 6500k from morimoto why does it still look like its in the 4300k range? isn't 6500k suppose to be white with a touch of blue?

@niclacoste 7 жыл бұрын

TheOne CalledJake After a couple weeks it starts to look like the 6000k - 6500k range. I've always use these bulbs in all my vehicles and the temperature is more like 6000k instead of 6500k.

@jacobysummers7824 Жыл бұрын

Wow thank you so much for showing me the parts I ACTUALLY NEED TO KNOW like how to remove the damn clip you never said how to do the most important stuff do DISLIKE and onto the next vid where hopefully somebody knows how to make a tutorial video