Видео показывает, как правильно сложить и склеить из картона Google Cardboard 2.0. hardisoft.ru/vr
Пікірлер: 33
@kumpon748 жыл бұрын
i've looked all over the internet for something like this. Perfect! Thank you!
@zenraxgaming17597 жыл бұрын
Me neither
@nixes94707 жыл бұрын
CRACK DE LA VIDA!
@aweasadbek54454 жыл бұрын
really good! thanks
@megabigblur8 жыл бұрын
You need to put a strip of conductive metal foil running from the outside of the small pyramid shaped thingy (Google calls it the "hammer" in the specification PDF) to the small semicircular tab which is exposed on the upper right of the finally assembled viewer. This becomes the button that you press so that the hammer makes contact with the screen. Unfortunately it's very unclear in the official PDFs since Google was targeting manufacturers and not home builders so they don't have step-by-step DIY instructions.
@harshborderwala11445 жыл бұрын
Those pdfs r lenthy and confusing
@tuanh67754 жыл бұрын
I'm not quite sure how the pyramid can touch the screen when you press the button outside. In the videos introducing GCardboard, it doesn't seem to have any copper tapes inside and I'm very confused about whether that button actually work? Can you explain it for me, please?
@RipperRzN4 жыл бұрын
Главный недостаток конструкции в том, что невозможно регулировать расстояние смартфона от линз (если это не фирменные линзы с правильным фокусным расстоянием). Я убрал заднюю крышку, приклеил доп. стенки с направляющими для бокса с выемкой под смартфон, который был в коробке из-под него. Теперь я могу его двигать бокс со смартом внутри кардборда ближе-дальше и фиксировать двумя спичками, когда фокус наиболее чёткий.
@brunojardel83944 жыл бұрын
super ! merci beaucoup !
@morpheus69586 жыл бұрын
Template is different from the video
@zenraxgaming17597 жыл бұрын
This video are perfect soooooooo perfect
@minimaniacast72255 жыл бұрын
Thank you bro!!! Im need of very help to make this!!! =)
@jimijm0x2748 жыл бұрын
does it want lenses
@joeljames28298 жыл бұрын
How/when should I put the lenses in the cardboard?
@GalluZ6 жыл бұрын
With logic and trial and error
@megabigblur8 жыл бұрын
Thanks, very helpful. The design is more confusing than the original Cardboard and it does not come with instructions.
@sniperdoc84048 жыл бұрын
what direction do the lenses go?
@RPMgo8 жыл бұрын
+sniperdoc8404 lmfao
@megabigblur8 жыл бұрын
+sniperdoc8404 If you get lenses that are flat on one side put the flat side toward your eyes. If your lenses are convex on both sides (same), obviously it doesn't matter.
@harshborderwala11445 жыл бұрын
We can get those drawing on this site vr.google.com/intl/en_in/cardboard/manufacturers/ Print out the drawings in true scale.. and make yr own
@sultankhan-cv4ww7 жыл бұрын
I have got some screen shots 😸 👌
@1235654able6 жыл бұрын
kzfaq.info/get/bejne/o8uDgtOFmJPPgZs.html
@solukvsiyah8 жыл бұрын
Thanks good tutorial.
@x_ray58272 жыл бұрын
Do i need glue??
@star3xcom2 жыл бұрын
I don't remember... I think Yes
@desvor_di Жыл бұрын
yes, yo need glue
@sonhoang-vm8sn8 жыл бұрын
please link design
@megabigblur8 жыл бұрын
+son hoang The PDFs are here, scroll down until you see the words BUILD IT YOURSELF and click on DOWNLOAD INSTRUCTIONS www.google.com/get/cardboard/get-cardboard/
@megabigblur8 жыл бұрын
+son hoang I put some instructions on how to print them out to the correct size on A4 paper here www.instructables.com/id/How-to-print-the-2015-Google-Cardboard/
@sonhoang-vm8sn8 жыл бұрын
+megabigblur ok.thank you
@laserbean000016 жыл бұрын
The link in the description leads to hardisoft.ru/vr/google-cardboard-2-chertezhi-dlya-pechati-na-a4/. It's in russian though. But the pdf itself is in english