You can easily make some upgrades to this tent. Ditch those clamps and remove them altogether. Hang 4 lamps from above using zip ties and run the cords out the air vent at the back of the tent near the top. This cleans up any unnecessary cordage. You may need a couple short extension cords to reach your outlets but it makes the space inside the sauna much nicer. I'd also recommend getting a plastic flat bottomed dishwasher tray to replace the additional fabric/reflective tray. The second liner that came with the drip tray will eventually get nasty. If you're using a stool in the sauna the legs will eat through the material and then sweat will start getting in there. It's also very easy to take the plastic dishwasher tray out and clean it in the shower with hot running water.

WOW! This looks exciting! If it's low emf, low voc and inexpensive then Matt you've just gotten a lot of people really excited. The size and even the look isn't offensive either really. I was about to buy a thera, but I'm not crazy about the emfs, and I'm not adverse to rigging one of these tents up myself especially if it's low emf and super cheap. The pricey wood sauna I'll save up for later. Just need to get my detox sweat on now. :) Blessings to you for your engineering on this! Edited to say: really can't wait for your vid! Hoping it comes out soon. :)

Use a zip tie so lights can move but they won’t fall. Good luck.

Great videos ! I am getting a corner unit on Monday from Radiant or Jacuzzi brand . Just waiting to hear from the owner of Radiant Health for a price . Thanks for everything brother

Just ran across this video. Ive actually been using this exact tent for over 2 years. If you push the clamps up over the bar theyll hook in place. What this tent is even better used for is skipping the bulbs and using a sauna steamer. I went back and forth using the steamer or having the bulbs in. Ive just ordered a real infrared sauna, but i will keep this tent for the occasional steam. When used as a infrared tent with the bulbs all hanging at the top i find it hard to get a great seating position that keeps all my body close enough to the heat. 3 bulbs will get this to 130 or 140, but the bottom stays cold as the heat all rises. So, this set up isnt ideal, but it has worked ok for me for a couple years until i decided I coukd spent 2k for one that woukd work better and be more convenient to use more often. When used as a steam tent it can easily reach almost unbearably high temperatures if you crank the steam generator to high. I just used one of the cheap chinese steam generators that look like a rice cooker, from amazon.

i did this and have been loving it. today however i saw a video about emfs and the importance of grounding it. what are your thoughts matt?

Are finnleo HM44 still a good buy? I’m wanting a good low emf sauna and I remember you mentioning it awhile ago

What kind of sauna should i get a clearlight or a radiant health for lyme disease? Also what do u think about red light therapy panel in sauna?

Looks like a cool DIY Sauna build. Do you have a link for that enclosure? I made one on my own and for a 1st attempt its good but this one looks better. Thanks

Awesome post, keep it up

Wow; are you going to share your final design with us -- and the parts / product list?!?! Or a way to purchase them from you? The outter shell looks cool.

I like the idea Could u at least tell us where to buy the stuff you showing please?

What kind of “foil/aluminum “ can I buy similar to that tent, in a Lowe’s type store , to line my very small bathroom walls? I don’t know what it is exactly called?

Run a simple nylon strap clamp thru top of clamp over green tube and wala , no falling lamps ever!

Hello Matt, Try a search in amazon for: 2 inch hose clamps stainless steel. You can open up the clamp by loosening it all the way. Wrap it around the tube/pole and clamp and fasten it back together. Tighten it up so it will not let the light fall but can still slide on the pole. You may need to use two clamps per light. If you want it to stay in place you could get smaller clamps.

So any updates? 3 weeks since this video.

Oh Matt. Matt Matt Matt. Looking at your DYI link on your other video lead me to search DYI and whay did I find? If I knew you experienced the grow room saunas, I would of saved my breath. You was on the right path though.

everyone using tent but my bathroom is 1,40m x 1m x1,80m ... does i really need a tent ? can i just put the steam/ hot rock inside ???

Thanks for inspiring video. A few months ago I had drawn up a timber and foilboard design I had been toying with because of the previous video you posted on a DIY sauna. But now after seeing this video I went out and brought a grow tent. I am short so I got a 120x60x150cm, size seems good for me. Still go to do light setup tho. Was thinking to put lights on timber boards and placing the 4th light up top simular to your design. Do you think 4 lights will be enough for tent size. Not to long ago I had all my mercury removed to and struggling with detox/energy. This has saved me a fair bit of work. Thanks for the video.

a twisty tie will stop them from falling

As per the clamp light..why not use a tie to secure it..so that it doesnt fall

Any tips to ground the lights to lower EMF? Why didn’t you just ziptie the lights in place to eliminate the falling?

Lol for the head lamp clip just put a pen or a zip tie between the handles Problem solved

Will this give you a full body sweat?

So Dr. Wilson is Near-Infrared? I've seen another video use this tent (VIVOSUN 48" X48" X 80" Hydroponic Mylar Grow Tent) with the "ZONEMEL Sauna Steamer Portable Pot 2 Liters".. to reach 110 degrees on the thermometer. Perhaps that might be a low-cost way of getting a Finnish style sauna? Although, according to Joe Rogan / Rhonda Patrick, they say it needs to reach 180F!!

what about zip ties

Saunaspace has a small wood panel of bulbs they're selling for $1000 and say that brooder lamp bases (such as you'd used) don't have EMF grounding. However-- in their Questions section for the panel, someone asked what a canvas wrap was on the cord and they'd said it stopped EMF leaks. So maybe that's all they added? I'm assuming you bought something like the Woods Brooder clamp bases? In that case do you mind please testing the EMFs on those? I really need a sauna set-up *ASAP* for health and I'll even buy the $1,000 panel ($1,300 Cdn yoikes) if I have to... but would much prefer a setup for half that price if possible. Grateful thanks! Hoping you see this soon! x

zip tie the handles...

I appreciate your efforts to spread awareness about EMF but I am somewhat baffled; if EMF is such a factor, why not just use traditional saunas? If you believe the mainstream nonsense that they are not as good, that's foolish. Traditional saunas are just as good. Infrared may get deeper, but at a cost! So it doesn't make sense to use them. Stick to traditional.