Gary over there at Late Nite V Twin walks you through every step of installing an oil cooler in a 2005 Harley Davidson Softail. But this install is the same for a shipload of Softails! Lots more videos to come!
Пікірлер: 203
@LonesomeNomad137 Жыл бұрын
Dude you’re by far the most thorough mechanic and teacher I’ve ever saw in a video.
@vivianfoster65343 жыл бұрын
Love your work you don't skip or rush anything. It is all there for you to see Im 70 year old from the UK and just bought a new 2020 fat boy keep up the videos.
@LateNiteVTwin3 жыл бұрын
Thanks for dropping in! I'm 53, and the crew I ride with are all older than myself, two are in their 70's as well! Enjoy that 20 Fatboy!
@sbaumann142 жыл бұрын
Yours are some of the most down to earth how to videos on KZfaq. Keep em coming!!
@mattsempf3632 Жыл бұрын
Why no more videos? You do a great job explaining how to get jobs done! You should keep it up!
@HeCoversMe2 жыл бұрын
Good stuff bro. It’s so relaxing and educational to watch you glide through these mods
@LonesomeNomad1372 жыл бұрын
Awesome, you have a great way of building confidence. Keep up the good work
@buster11732 жыл бұрын
You're instructions are the best I've seen!
@xenaozn3 жыл бұрын
Can’t get enough of your videos, man!!
@LateNiteVTwin3 жыл бұрын
Thanks! More to come stay tuned!
@dustydean563 жыл бұрын
Good job Gary, you make it look easy !
@LateNiteVTwin3 жыл бұрын
Thank you! I appreciate that. I try and keep it simple so anyone can follow. I will be adding more technical info as a few have suggested they would like that.
@dkkauffmanjr3 жыл бұрын
Several concerns.. one yes copper is softer but a better conductor for heat transfer and better for removing heat. Another issue is location. Putting it on the front gets large flow of air, aerodynamics 101. Airflow under bike tucked up in with flat blades opposing the actual airflow and not getting good airflow. Lastly the heat temps are hotter the closer you are to the asphalt. In sure it's an upgrade from nothing but definitely there are better choices and solutions.
@dustinfuller52592 жыл бұрын
keep making these videos! great stuff.
@jerrydouglas76433 жыл бұрын
Enjoyed this video! Well done!
@LateNiteVTwin3 жыл бұрын
Thanks Jerry! We appreciate the views and hope it helped you!
@brownboy6844 Жыл бұрын
Nice ... I just added the Harley cooler for my Forty Eight...and it is a solid 20 degree cooling and sounds great and I feel a better response twisting the throttle.. went about 100 miles yesterday and never went over 200... I think coolers are the way to go with any air cooled engine.
@elizabethwoodcock2823 жыл бұрын
Congrats on your first video! Nice job!
@LateNiteVTwin3 жыл бұрын
Thank you ! Look for more exciting videos coming up!
@Grumpyoldman60-10 ай бұрын
I had one of those on my 03 RG and put 100K miles on that motor. Really good product and well built
@tomquinn6072 жыл бұрын
Best looking cooler set up I've seen. The money saved from dumping the X (and her knife) will pay for it.
@blakerzmoss64279 ай бұрын
Love your video oil cooler. I have a 2008 softail springer screaming eagle.. Mine also got hot in Reno. Going to put one on..thax..
@whydahell38163 жыл бұрын
Think ya had a mean ass Xgf buddy. Lol Awesome awesome video. Can't wait to see new ones
@tygodine3 жыл бұрын
Fantastic videos!!!
@LateNiteVTwin3 жыл бұрын
Thanks Todd! We have fun doing these, and appreciate you stopping in!
@tonyrap3846 Жыл бұрын
hell yea, keep it coming
@thomasdubroc424511 ай бұрын
Watched your video prior to my purchase/install. Way less hassle on the install, excellent quality components & peace of mind as opposed to the other types out there including HD product. Only item i couldnt see was if the return line ran over the top or bottom of the front motor mount. I tried it both ways & chose over the top of it. Great video Gary & a great magician on a few of the fittings swapped out. No slight of hand there LOL !!! P.S., Your ex must be a gypsy with all those knives LOL !!
@roninkannushi80203 жыл бұрын
I am glad to find you.
@LateNiteVTwin3 жыл бұрын
Thanks for stopping in and I hope this has helped out!
@jimedward89082 жыл бұрын
Will probably put one on my 99 FLHR this spring
@glennbrandl68773 жыл бұрын
Top notch GREAT videos 👍
@LateNiteVTwin3 жыл бұрын
Thank you Glenn! And for stopping by!
@vitoraimondi26269 ай бұрын
Awesome video - thank you for sharing! Liked and subscribed!! Just discovered your site!!
@heraldlee8112 Жыл бұрын
Thanx for sharing the video. Like to get one for my deuce
@anthonylippa73462 ай бұрын
Great work easy to understand. I have a Softail with Abs you said won't fit but looks like it would?. And would love see you do a cam swap on a late Softail your very easy to understand. Thank you. Anthony
@jan180 Жыл бұрын
Nice Video Gary! Pleased make more Videos about Upgrades!
@gaknskk Жыл бұрын
I think the wife used the knife on him In stead of the oil cooler . Or he's in jail idk
@vernonloften52482 жыл бұрын
Great vids! Wondering if you could do one on servicing a springer front end?
@tjzulu1 Жыл бұрын
Great video brother!!! Keep'em comin'!!
@Tor2502-yj3 жыл бұрын
Gr8 video. That is a sweet product totally hidden.
@LateNiteVTwin3 жыл бұрын
Thanks Tor! It's the best oil cooler that I have ever used or even seen!
@danielzamora37693 жыл бұрын
Great video
@LateNiteVTwin3 жыл бұрын
Thanks Daniel! I hope this helped you out??
@chuckjones36762 жыл бұрын
Great vids I'd like to see rocker box clearing for big cams thanks
@donens93102 жыл бұрын
Nice video. Quick questions. Is it possible to clean oil cooler, once removed? If so, what would you use?
@mrbigg72552 жыл бұрын
Where you been? Your videos are great 👍
@joshuagross81582 жыл бұрын
Dude we need more no BS videos. Where ya been?
@billcarp35232 жыл бұрын
I've watched other videos from you, Gary. Good presentations. Question: How much extra oil does this cooler take to refill? The instructions probably say, but I'm just curious.
@Trebior12 жыл бұрын
probably around the 3-400ml
@adrianortiz45762 жыл бұрын
What a great video. This is the first one I watch and I wish there were more than what there is. I don't know If I could just get an answer, I have a 2017 Fat Boy S with the SE110. I'm from Mexico City and damn it runs hot. Do you think this would be a good choice for my engine? Thanks!
@scottgorman7166 Жыл бұрын
Slick and I don't mean oily..clean install.
@Dogsled10003 жыл бұрын
Great video, hope to see more from you. You seem to have some issues with the EX and her knife...:-)
@LateNiteVTwin3 жыл бұрын
YUP........That's why she's my EX! My Harley stands beside me ALWAYS
@flhusa12 жыл бұрын
I GOT MY OIL COOLER FROM THE JUNKYARD. ALL THE OLDER FORD CARS HAVE A OIL COOLER FOR THE POWER STEERING
@RoadglideDad2 жыл бұрын
Great video! Will it still fit with a crash bar? How about eith Khrome Werks exhausts, one of which runs underneath the bike? TIA!
@americanveteranaceshigh90512 жыл бұрын
just installed an oil bud on my 2012 HD ultra limited...this was a literal pain in the ass...make sure you receive ALL of the parts in the kit...although, the kit does not contain an inventory list...call Bud (the guy answers his phone) and inventory the parts kit BEFORE you breakdown the bike...lesson learned...I was missing three parts, which I discovered after breaking down the bike. Bud shipped them...a week delay. If you have crash bars and lower fairings like I did...they are totally in the way, so that'll be a pain point. Removing the OEM oil filter adapter hex bolts - had to take-off the heat shield to get to the bolts. Bottom line, get a jack stand, inventory the parts w/Bud over the phone BEFORE you break down the bike, and be prepared to spend MORE than 90 minutes on the install. So far, glad I did it. Two-week update...no leaks...engine ran way, way cooler (Virginia July weather) on the local mainways...significantly less heat while waiting at traffic lights. Bud said it'd keep the oil about 20-30 degrees cooler...and I would have to agree. If your upgrading you're engine to high-output / high-performance...highly recommend protecting it from high temperature using the Oil bud kit and a Lenore cooling head fan, Mobil 1 V-twin syn oil. FYSA...the new Harley Syn Heavy 80W-140 gear oil in the primary and tranny works awesomely...finally, I can find Neutral without issue. Is the Oil Bud worth $700...Well, I'm glad I installed it on my 2012 FLHTK ugrade: HD SE Stage V kit (92500037A) w/259 cams, S&S cam plate and TC3 oil pump, 10-5-1 High-compression pistons, high capacity rollers tappets, high flow fuel injectors, 110 big bore cylinders, CNC ported heads/high-compression valves, SE rocker box / HL arms, SE compensator, 58mm throttle body, SE HF air intake, 53A regulator kit, Baker tensioner, SE clutch pack, new inner lefty bearing,complete tranny overhaul and upgrade new M8 transmission, Rockford Fosgate Stage III stereo w/400w amp, Ciro wireless phone charger, Oil Bud cooling system, Lenore head-cooling fan, and a great engine TUNE after break-in...and best of all...my wife didn't leave me after it was all done!
@brew14562 жыл бұрын
I have a 2001 heritage Softail classic from what you're saying that oil cooler would fit on mine as well correct? And what is the name and where would I get it, I'm in Ontario Canada thank you for your video and the way you described what you did.
@alexallchurch43502 жыл бұрын
Hello Gary, great educational videos, what is the brand of the oil cooler for the softails?
@felixbenitez9701 Жыл бұрын
Did you ever find out what brand this cooler is?
@alexallchurch4350 Жыл бұрын
@@felixbenitez9701 No Felix also found the unwillingness from dealers to find the product. I do not trust the current situation with logistics to buy it from the states. I have moved to a full synthetic oio as eell ss upgrading the cam plate and oil pump which has reduced the engine temp by around 10°. Not quite the same but an improvement.
@bullast2046 Жыл бұрын
@@alexallchurch4350 out of curiosity, are you referring to 10* temp drop in Celsius or Fahrenheit?
@nosuperbowl Жыл бұрын
Well Gary, I've got a 2014 Ultra Limited, Harley Davidson with 113,000 miles on it and runs like a champ. For those hot days, this looks like I could install on my bagger. Will it fit with a 5qt. high volume oil pan? The bike has engine guards and voltage regulator in the front. What do you think? Thanks for the great videos and instruction!!!
@MrTbonemcd2 жыл бұрын
Great video, is there one available for 2019 water cooled ultra limited? Thanks
@BigFiveJack3 жыл бұрын
Your videos are very enjoyable and informative! I wish I could see where you're running your repair business. (At least which state you're in.)
@LateNiteVTwin3 жыл бұрын
I have a little one man shop in Northern California, about 140 miles north of Sacramento.
@BigFiveJack2 жыл бұрын
@@LateNiteVTwin Thank you for sharing that info. Being a south easterner I'll not likely be near you soon, but others, over there, in person, surely will benefit from your operation!
@robertzerrenner55852 жыл бұрын
Good video, you commented about bikes with ABS. Will this not fit a bike with ABS?
@markguarini-id3rt Жыл бұрын
Hey Gary…really excellent videos thank for the superior content and Every Man delivery. Not sure if I missed it but did you ever indicate the name of this oil cooler as I didn’t catch it? Also does this manufacturer make one for a Dyna twin cam as well? Thanks again and be well! Mark G
@bullast2046 Жыл бұрын
Did you ever get an answer to your inquiry?
@ironpug42 Жыл бұрын
@@bullast2046no
@bullast2046 Жыл бұрын
It’s called OilBud.. they are pricey
@garywight4831 Жыл бұрын
all you guys talking about rocks and jacking need to go to the website and look at the info. The guy hits it with a 5lb..hammer and shoots it with a shotgun no leaks! It mounts up inside the frame rails!
@anthonylippa73462 ай бұрын
Forgot to ask cam swap on a late model twin cam Softail
@Jimmy_Jim_Jim_12343 жыл бұрын
Subbed!!!
@_hitmn_2 жыл бұрын
Love this. Can you tell me what brand it is or the name of the manufacturer please?
@brettaschenbach45292 жыл бұрын
Oil bud out of Montana
@harryriv74213 жыл бұрын
Great job l lake for my harley
@freddychico36212 жыл бұрын
what is the difference between this and the cooling system on the limited?
@americanveteranaceshigh90513 жыл бұрын
hey buddy, with the oil cooler add-on, does that add to the oil quantity required to keep up adequate oil pressure? more distance for the oil to travel...? thx
@LateNiteVTwin3 жыл бұрын
GREAT question! Yes it adds more capacity, and no, it does not require more pressure to push the oil through. Since Harley has a dry sump system, and this is basically in line to where the traditional cooler is routed, it has zero effect on the system to "try" and keep up or require a higher volume pump to make it work. That was a great question btw! Hope this answers your question.....
@jimmyjones83112 жыл бұрын
Does it have to be removed to get old oil out when performing an oil change?
@infini19703 жыл бұрын
It's an intriguing product. I'm curious though since I have a street glide, live in a city and only seem to get overly hot in traffic, does it have a sensor to start pumping like UltraCool does when the bike hits a certain temperature? If it's cool out and on highways the bike does not need to be cooled any more than it is and if it's cooled too much it's not good either. So having a sensor would be optimal I think.
@LateNiteVTwin3 жыл бұрын
There is a thermostat in the filter housing adapter, and it regulates the flow through the cooler. It's not just a throw a cooler in line type of product.......anytime you can drop oil temps in an air cooled engine, the better.
@gaknskk Жыл бұрын
@Late Nite V Twin what kind is it? Brand please?
@bullast2046 Жыл бұрын
@@gaknskk did you ever find the product name/ description?
@afghanyeti Жыл бұрын
I was looking at an ultra cool for my 05 FXSTDI, how does that work with stop an go or heavy traffic mounted like that.....
@somnos132 жыл бұрын
So will this work on a twin cooled 15' Ultra Limited low?.......I ask cause it's got all sorts of stuff in the way that could prevent this oil cooler solution.
@chadknutson8482 жыл бұрын
What brand is this oil cooler and will it work on my 2007 street glide fuel injected
@Jonathan-L3 жыл бұрын
Hey Gary, maybe we need to buy 2 of these coolers; one to mount on the bike and the other cooler to protect us from her shotgun blast when she gets so furious because she couldn't find the oil cooler she wanted to stab :)
@LateNiteVTwin3 жыл бұрын
NO KIDDING! Oil bud makes the best stuff! HAHAHAHAHAHAH
@scrcleat12 жыл бұрын
Can you share a link where we can buy the cooler or provide the company name?
@kevinkaminski12852 жыл бұрын
Right I don't hear him mention the name.
@riachardpaul9432 жыл бұрын
do you need extra oil to compensate for oil cooler ?
@Heavy69Metal2 жыл бұрын
I got an oil cooler and fan and still get 316-339 riding my 107 and my 131
@alfonsoornelas8411 Жыл бұрын
What Oil Cooler kit did you install? Where can I buy one.
@miguelleon91062 жыл бұрын
what solutions are there for ABS equipped softails?
@AntipodeanDescent6 ай бұрын
How'd it go with the drilling part?
@johnallen471010 ай бұрын
Can a lift jack still work on a road king with this underneath cooler. Tka
@robertturriff98367 ай бұрын
Can you get them with the fans on them?
@donatodeangelis48432 жыл бұрын
Who makes this product and will it work on a street glide. Thanks great vid.
@Dunlap212 жыл бұрын
As far as I can tell it’s called oilbud
@rschris3 жыл бұрын
Hey forgot to put a lil oil in that filter , and put a film of oil around that filter seal . But awesome iNstall how much more oil did you get to add?
@LateNiteVTwin3 жыл бұрын
Hi Christopher! I never put oil oil in the filter, since they mount horizontally....I spin the motor with the coil disconnected so it won't run, prime it in that way. But good catch! The cooler takes about 1/2 an extra quart in the softail unit I installed, the one on my touring bike holds almost 3/4 more
@americanveteranaceshigh90513 жыл бұрын
@@LateNiteVTwin thanx for the heads up on the extra oil add...
@erichaagen99733 жыл бұрын
i have a 08 Twin cam Ultra 96 Stage 1 in South Texas , How much more oil will this add overall and which brand of cooler was this ? Why did you choose this Brand ? Thnx in advance and lookin forward to more videos from you . .
@LateNiteVTwin3 жыл бұрын
Hi Eric! So, this is an OIL BUD oil cooler. Many reasons I go this route. One, it's hidden away under the frame away from road debris damage from the front wheel, two, you don't see an ugly cooler on the frame anywhere. three, it has 600 times the colony surface than a normal oil cooler. Capacity is double that in volume of a normal frame type cooler and that even helps because if you can have more oil that has been cooled, the engine will always run cooler. Oil Bud is out of Helena Montana. He sell his coolers directly from his web site.
@briancarpenter2981 Жыл бұрын
What brand of oil cooler did you install? I like the bottom mounting.
@roycarlson6783 Жыл бұрын
It's an oil bud cooler
@patbell9166 Жыл бұрын
Do they make a cooler for a 2020 triglide twin cooled
@SB-vh7jn2 жыл бұрын
Do they have this for Dyna's?
@CarlosGarcia-ls4hn Жыл бұрын
When you talk about spending some coin on that, how much are you talking about? Also, can you post the part number for that? I have not seen that listed on the Jagg website. Thx
@davecorcoran9188 Жыл бұрын
What’s the brand part information, maybe you have it listed and I don’t see it. Great video,but I need the stats please.
@666SeeR999 Жыл бұрын
Awesome product. But I have one question. Is it still possible to use wide band sensors with this adapter? It seems like there are not enough space between sensor bung and adapter.
@bullast2046 Жыл бұрын
Did you ever get an answer to your question? Cause I have the very same question
@666SeeR999 Жыл бұрын
@@bullast2046 Nope. But I was able to install this cooler on my RK2000 with a Samson True Dual and aftermarket wide band sensor. I can't say anything about other years and models :( Hope it helps you.
@bullast2046 Жыл бұрын
@@666SeeR999 I appreciate the response.. I’m leaning away from the Oil Bud cooler because it requires drilling through the frame.. thanks again.. peace
@acastiglione100 Жыл бұрын
Gary, where can I find this oil cooler?
@chuckmanske94922 жыл бұрын
I've got a 2016 FLHTK what oil cooler is this?
@frankiegonzales43702 жыл бұрын
Where do I get one for my ride
@Stonecutter0072 жыл бұрын
can you do an Upgrade Video on Twin Cam Timing Chain tensioners, gear drive aside, there's got to be something better than stock to fix this weak link in the drive train, they really do Suck,
@James-fk2sb3 жыл бұрын
How do you like this oil cooler on your bike ? Looking at a oil bud or a ultra cool. In the fence so just researching both the best I can. Oil bud is $700 ish can’t really see it / ultra cool $500 ish installs between down tubes in frame above or below regulator.
@LateNiteVTwin3 жыл бұрын
Hi James, I'm a big OIL BUD fan. I have used every oil cooler under the sun in my repairs and upgrades, personally and for customers. I have to say, my 117" twin cam has never run cooler. I like the fact it's under the chassis, not behind the fender. I have a few dyno shops/ engine builders locally and they swear by them. Let me know what way you go, and how it works for you
@jonathanclark8008 Жыл бұрын
What brand is that oil cooler can’t find it
@afghanyeti2 жыл бұрын
And the first speed bump?
@dickfitwell Жыл бұрын
Stupid Question, how do you jack up the bike if the cooler is on the bottom...Just want to know?
@AmosBHaven3 жыл бұрын
I have an '09 FLSTC with those engine guards installed that you said were not going to go on that particular soft tail. Is this "cooler" still able to be properly "fitted" to function as intended along with these engine guards?
@LateNiteVTwin3 жыл бұрын
Yes, the engine guard will work along with the cooler we installed. no problem!
@AmosBHaven3 жыл бұрын
@@LateNiteVTwin I was thinking that it might take up inserting a spacer (washer) or 2. But, when you said the bike you were installing this cooler on wasn't installing, or EVER installing an engine guard? Kind of sounded like an ultomato! LOL! Thanks for the clarification!
@LateNiteVTwin2 жыл бұрын
@@AmosBHaven Oh boy, I'm sorry it came across that way.......My customer just doesn't like an engine guard I guess. The oil cooler is designed to fit with or without. The only thing that will impede install for you is a bike with ABS. The brake lines are in the way from the rear master cylinder.
@AmosBHaven2 жыл бұрын
@@LateNiteVTwin I'm trying to keep wrapping my head around, my head around, how such an "iconic" motorcycle with such an enormous price tag, (in which it seems these after market companies are taking their "cue" from as well) one can spend almost, in some cases, more money on parts, labor etc. trying to KEEP these motors from "self destructing." Maybe they shoulda just stuck with the "45", eh? LOL! I "subbed" yer channel! Great info! Especially for "this" first time owner.
@colesnorris2 жыл бұрын
With the cooler sitting lower than the drain pan, is there a way to extract ALL the oil out of the cooler when changing the oil? I didn't notice a drain plug on the cooler, or am I not seeing it, or?
@LateNiteVTwin2 жыл бұрын
Hi John, I usually just remove the front line where it goes into the cooler and drain it. There is plenty of room to get to the drain plugs.
@colesnorris2 жыл бұрын
@@LateNiteVTwin Thank you
@ironpug42 Жыл бұрын
What brand of oil cooler is it
@dickfitwell Жыл бұрын
which brand is that cooler?
@aldenapoli4526 Жыл бұрын
Name of oil cooler not listed. Please send us a link.
@cadecvd Жыл бұрын
What brand of oil cooler?
@michaelrogers384323 күн бұрын
Hey who makes the oil cooler? 1:01
@peterbergeris6510 Жыл бұрын
You didn't say who makes the oil cooler?
@kamoniewright20573 жыл бұрын
Is it only for softail or could it work For a road king
@LateNiteVTwin3 жыл бұрын
This particular cooler is for the softail, but bud makes them for touring as well. He sells directly from his company. Here is his web site.....www.harleyoilcoolers.com
@Jimmy_Jim_Jim_12342 жыл бұрын
Does anyone have experience with the Jagg side mount? Are the tube connections reliable?
@Lelok453 ай бұрын
Had one bust on me twice with this cooler. Make sure you get quality clamps and higher rated oil tubs than the ones he sends you. I got stuck out in Maricopa highway 33hwy in the middle of the night. Another time I was at a red light a my hose busted. Got oil all over the damn bike and myself. Finally got her fixed up and she runs like a champ. Way cooler than how it use to run. Again, quality clamps and higher rated temp hoses than he sends. I have 21 softail standard.
@Jimmy_Jim_Jim_12343 ай бұрын
@@Lelok45 Wow. Hey thanks for the info. I did end up getting a side mount. And it came with those crappy worm drive clamps. I ended up using proper fuel hose clamps. I'll keep an eye out for the hoses though thanks!
@martinnicholson52403 жыл бұрын
what is the brand name of the oil cooler?
@LateNiteVTwin3 жыл бұрын
Hi Martin, the oil cooler is from Oil Bud. here is the link! www.harleyoilcoolers.com