Check out this diy kindling splitter video. This has to be the best splitter going.
Пікірлер: 458
@MrOffshore8 ай бұрын
awesome…love that it catches the kindling…you’re not chasing sticks!! Great job!!
@barrybaldwin55353 жыл бұрын
Excellent evolution of bringing your vision to fruition. There are several manufactured kindling splitters that I have seen on KZfaq, but there is a certain satisfaction & pride related to making your own!!!
@firelifeproject67553 жыл бұрын
Barry, I must admit that it was definitely satisfying using it after it was built. It is easier on the back and easy on the knees. I think it’s one of the better ones on KZfaq personally. Thanks for taking the time to comment and thank you for the support!
@michaellong87992 жыл бұрын
@@firelifeproject6755 I agree. I welded an ax head to a plate years ago. I like how yours is at working height and has a bucket to catch the flying kindling. Nice work.
@birdman58583 жыл бұрын
Nice job! Reminds me of my days working construction. Loved how you handled that torch!
@firelifeproject67553 жыл бұрын
Thank you for that comment and for your support!!
@chriswilliams54983 жыл бұрын
Great job, great idea. Probably the simplest I've seen yet
@firelifeproject67553 жыл бұрын
Thank you Chris for taking the time to comment! Also thank you for your support!
@rustylee96303 жыл бұрын
Now I have a project to show my wife that will show her I really do need a welding and cutting outfit. Super cool idea.
@firelifeproject67553 жыл бұрын
That’s good to hear! It is really handy and cuts up a lot of kindling real quick. It also saves your back from bending over and picking up kindling.
@bendoucette5921 Жыл бұрын
Hello and happy new year. I built your kindling spliter this afternoon, and it is amazing . No longer am I chasing bits of kindling around on the floor. I hope you and your family have a wonderful new year. Thanks, Ben from Nova Scotia
@firelifeproject6755 Жыл бұрын
Thank you for the great review really appreciate it and thanks for the New Year’s cheer. Happy New Year’s to you and your family as well Ben!
@CoffeeAndSmoke23 Жыл бұрын
@@firelifeproject6755 Do you build these for sale ?
@firelifeproject67555 ай бұрын
No sorry
@irondoger3 жыл бұрын
Steady hand on that torch and a great idea, thank you for sharing 🙏 A little OCD on plumbing the wedge but I do like perfection, awesome job!
@firelifeproject67553 жыл бұрын
Thanks, I’ve got a few years of practice. Thank you for your support and taking the time to comment!!
@irondoger3 жыл бұрын
Credit where credits due 🙏
@miafrench968810 ай бұрын
Love it! Got the original, saw how small it was, returned it for the XL. It splits my ~7x16" firewood into smallwood and kindling in a flash. kzfaq.infoUgkxSRemO77LrM90rx_It_Wh6ZnKAS0H2A8t Good for debarking too. It's so fun I now have too much kindling and have to fight the urge to split the big pieces. I usually split dried cedar, but I've split dried oak too. The edge on mine has stayed razor sharp. I mounted it on a couple pieces of pressure treated 4x4 to hold it steady and quiet the ringing. Several reviews and videos show people having trouble keeping the wood straight. How do I put this gently?... You have to be smarter than the wood. Don't try to split knots, or badly curved grain. And hold the wood (with leather gloves) and tap it once to set it on the blade before giving it a good whack. And you have to know how to swing a hammer. If you don't know what wood grain or knots are, and you can't swing a hammer without hitting yourself or things around you, I suggest buying firewood and kindling pre-split. But if you're smarter than a log, this beautiful tool will make splitting firewood into kindling safer, faster and way more funner! I highly recommend it, and get the XL.
@firelifeproject675510 ай бұрын
Thank you it does a great job
@Detman1012 жыл бұрын
Absolute GENIUS!!! Holy shinola...this is simple abundance!
@j.w.m.rhynejr97662 жыл бұрын
Awesome instructional video!! gonna make one for my wood pile reduction efforts!!
@firelifeproject67552 жыл бұрын
Thank you! I’m pretty new to this but I’m glad some people appreciate it.
@nrich51272 жыл бұрын
For those who don't have an electric welder it is possible to construct a "holder" for the metal splitter out of hard wood that is bolted together. Also it is possible to use an old axe head as the metal splitter .
@jacknbg6819 Жыл бұрын
Or use an old brake disc as base which brings plenty of holes to screw on a stand and the metal splitter onto. Great Idea with so much potential. :) thx
@firelifeproject6755 Жыл бұрын
100%
@mattpeacock52083 жыл бұрын
That's a pretty smart idea.
@firelifeproject67553 жыл бұрын
It works really well! No more sore knees or back. Thank you very much for taking the time to comment and thank you for your support.
@barrytanenbaum41573 жыл бұрын
Brilliant idea! Well done! Thanks for showing us this video!
@firelifeproject67553 жыл бұрын
Thank you! I got some more great ideas that I’d like to put on video soon as well. Please like and subscribe so you don’t miss out!
@barrytanenbaum41573 жыл бұрын
@@firelifeproject6755 Susbribed!
@firelifeproject67553 жыл бұрын
Awesome!! Thank you!!
@firelifeproject67553 жыл бұрын
@@barrytanenbaum4157 thank you!!
@richardcanfield27412 жыл бұрын
That’s an absolutely great idea, thanx def gonna make one
@loueckert49706 ай бұрын
Thanks, I love this idea.
@thomasjarrow3912 жыл бұрын
Simply loved this tutorial vid. Raw, real, entertaining and useful. Was considering buying one of those cast iron gadgets for $80+... Now I'm going to build one of these before the snow flies here. Thanks...oh, and good beats!
@firelifeproject67552 жыл бұрын
Thanks Thomas, I appreciate the positive comment. There a relatively easy to build.
@mrlariata92903 жыл бұрын
Thats a great idea. Wish I had that as a kid growing up chopping wood.
@firelifeproject67553 жыл бұрын
Hey thank you! I’ve heard that a few times. Thank you for your support and your comment!
@janzam3 жыл бұрын
Excelent device!!I will make one for a friend who lives offgrid. Cheers from Romania!!!
@firelifeproject67553 жыл бұрын
Awesome! It works awesome!! Thank you for your support and for taking the time to comment.
@algwoutdoors94813 жыл бұрын
Nice project. Ignore haters sir. They are just here to try to get under your skin, don’t even respond to them.
@firelifeproject67553 жыл бұрын
Thank you!! I appreciate the comment and the support!!
@CWME022 жыл бұрын
Nice work with that torch. Good idea you have here with the bucket too.
@firelifeproject67552 жыл бұрын
Thank you!
@jonesmachineco Жыл бұрын
Solid free hand skills!!
@carloshernandez-diaz74923 жыл бұрын
Awesome. Simple. Functional. Great for a situation where safety is a bigger concern than speed (this should always be the case). Especially for an elderly person, kids, etc.
@firelifeproject67553 жыл бұрын
Thanks for your support and thanks for taking the time to comment!
@terrencebrennan17023 жыл бұрын
Excellent. Better than those for sale. A lot better.
@firelifeproject67553 жыл бұрын
Thank you! It works awesome!
@paulw10592 жыл бұрын
I like how a lot of the comments on here are people saying that this can't be diy because they can't afford the tools needed to do this project. Lmao. Not everything revolves around you buttercup. I think this is pretty cool, although I just use my hatchet, a hammer, and an old level log on the ground to chop up some kindling, seems to do the trick well, but this certainly would speed it up some.
@firelifeproject67552 жыл бұрын
Hey just want to say thank you very much for taking the time to Karen. Really appreciate your opinion and I totally agree with you.
@YouTuber-mc2elАй бұрын
Perfect for keeping right at the wood stove near your split wood. Grab a piece of wood and split it. Kindling captured along with small debris. Minimal clean up. Great idea.
@idiotradar17 ай бұрын
Great concept, as already stated I think you should cut the bottom of the pail with a custom fit that goes over your splitting wedge. When the pail is full just pick it up and take it to your stove. A little too much video on you shaving that piece of wood down, just saying.
@bendoucette5921 Жыл бұрын
Great, video, great idea. I am going g to build one on the next stormy day we get. All the best, Ben from Nova Scotia
@smsgtbulldog Жыл бұрын
Nicely done Sir!!!
@firelifeproject6755 Жыл бұрын
Thank you for the feedback! This works really great and the only thing I would do different is possibly put a hole in the bucket so when you’re done splitting the wood into kindling you can just take the bucket away with you.
@ranger53092 жыл бұрын
Ooooooh ! That’s a very nice project ! 😃
@alanosborne19476 ай бұрын
Ya know that's a great idea and I appreciate the fact you can do it yourself. Trouble is not everybody has welding skills or the equipment to weld so for most people it's just cheaper to just buy a kindling splitter already made. I did find it very painful watching you scraping the bark off that piece of wood with a hatchet and big knife. I would have taken that wire wheel used to clean the rust off bottom the plate to remove bark mush faster.
@firelifeproject67555 ай бұрын
lol thanks
@eiward2 жыл бұрын
Great video. Thank you
@firelifeproject67552 жыл бұрын
Thank you!
@ridemfast76252 жыл бұрын
Very nice work! I have an extra splitting wedge, maybe even a hatchet blade. Another thing on the list of to do's!! :-)
@earlzathome2 жыл бұрын
Great project! Saves the back too!!
@firelifeproject67552 жыл бұрын
Yes it does!
@earlzathome2 жыл бұрын
@@firelifeproject6755 Now I know what to do with that splitting maul that the head came off off ...👍
@johnathansmyth95072 жыл бұрын
Nice DIY idea.....awesome video, and simple welding that most people could do.....If not, then surely they can get inspiration to build a similar tool using different materials or methods....!
@firelifeproject67552 жыл бұрын
Totally agree thank you for taking the time to comment
@avidhuntr3 жыл бұрын
Yup! Imma have one of these next to the fire box soon. Fabulous idea, I'm sick of picking up kindling after hit with the hatchet and it squirts across the room. Thanks fir sharing
@firelifeproject67553 жыл бұрын
Hey! Thanks for taking the time to comment and for your support. This works awesome and you are going to wish you had one a long time ago!
@avidhuntr3 жыл бұрын
@@firelifeproject6755 Haha my back will be thanking me. Already looking for a bucket got an endless supply of drops at work for the circle as well as the upright blade. Imma rob your idea but gonna make my blade slightly wider. This is genius dude. Thanks again for posting. Where you from?
@firelifeproject67553 жыл бұрын
Awesome! From Alberta
@firelifeproject67553 жыл бұрын
You?
@avidhuntr3 жыл бұрын
@@firelifeproject6755 Nova Scotia
@cbpuzzle3 жыл бұрын
For car camping I use a parallel wood clamp to stand up a small axe and use it in the same way with a make shift wood baton. Sometimes I get fancy and lash a rock to the baton with paracord for extra weight.
@firelifeproject67553 жыл бұрын
Nice!! Good idea! Thanks for taking the time to comment and for the support!!
@57Dalv6 ай бұрын
Great idea! I almost bought the popular commercial splitter but this is much better having the bucket to contain the kindling. On my bucket list to build this winter in the shop. I'm pretty sure I have all the parts so $0.00 cost other than electricity. Subscribed hoping you make the big 1000 soon - I know that is a milestone in the KZfaq world. Good luck and happy holidays.
@firelifeproject67555 ай бұрын
Thanks for that!!
@PositiveEnergyPodcast2 жыл бұрын
This is awesome mate, and reminds me of the Kindling Cracker product but the bucket is a brilliant addition!
@firelifeproject67552 жыл бұрын
Thank you very much for the positive feedback. It works great!
@johnnz43753 жыл бұрын
Just a suggestion , next time don’t add music the music made me want to stop watching. For the rest good video.
@firelifeproject67553 жыл бұрын
Thanks for the advice and taking the time to watch the video John. I was wondering if I should have left the music out. Cheers
@quentinglenn48303 жыл бұрын
If the music bothered you turn it down or turn it off, that is kind of a no-brainer
@firelifeproject67553 жыл бұрын
@@quentinglenn4830 yes there is always that option
@Rossski3 жыл бұрын
I would've liked to hear the sounds of him working
@firelifeproject67553 жыл бұрын
I’m learning right away that you can’t please everybody....
@sneff34076 ай бұрын
Great idea
@rhinomite52033 жыл бұрын
This is the best splitting apparatus I've seen IMO, cuz the bucket catches all the mess. Pretty darn cool brother, you could probably build that into a TikTok and KZfaq ordering site for ths who cant or don't have the equipment to accommodate, just sayin
@firelifeproject67553 жыл бұрын
Thank you!! Yes, I have thought about that, and I do have it on TikTok. Thank you for the awesome comment and support!
@mrxd79533 жыл бұрын
I made a four way axe to split logs a long time ago, but this bucket idea is nice.
@firelifeproject67553 жыл бұрын
That’s a cool idea! I’m gonna try that!! Appreciate the comments and thanks for taking the time to watch my video!
@thomasmusso11476 ай бұрын
👍👍👍 A very good idea. For those without the relevant welding and steel cutting equipment, one's local Engineering Works, given a template, should be able to rustle up something at a reasonable price. I needed a tow hitch height adjuster for my caravan / new tow vehicle. Measured it all up (thrice 😏), transferred the measurements to a stiff cardboard template, down to my local engineering works and 'bobs your uncle' .. appreciably cheaper than those on offer at the Caravan Dealership and customised for my setup to boot.
@Kingreddoberman3 жыл бұрын
Cool idea! BTW, nice torch work.
@firelifeproject67553 жыл бұрын
Thank you, I got some more ideas that I’d like to put on video as soon as I get home!
@MikeOrazzi6 ай бұрын
Nice idea.
@janethesen74573 жыл бұрын
Awesome idea!!
@firelifeproject67553 жыл бұрын
Thanks! I have more great ideas to video soon
@tomjeffersonwasright22884 ай бұрын
I just use a double bit axe stuck in a log end. But I sure like the way your rig keeps the kindling in the bucket.
@firelifeproject67554 ай бұрын
Thank you! It works real slick and it’s great for my mother and father because they have arthritis and they’re really getting old so this is a handy way for them to cut up some kindling if they need. And it’s safe for them lol I don’t have to worry.
@brandongrandorff9539 Жыл бұрын
I did same thing but used concrete. Worked awesome thank ub
@jamesfirehummer32162 жыл бұрын
watching just for that gnarly guitar riff.
@firelifeproject67552 жыл бұрын
Yes!
@alpinealpine27936 ай бұрын
Enjoyed the ideas, if I ever get to the place in life where this would be used I would opt for a brick bolster for the additional width.
@guns4funfreedomkeeper9992 жыл бұрын
Best one I have seen but I think I will find an old rusty looking bucket for mine. I just like that look.
@firelifeproject67552 жыл бұрын
Thank You
@markluke84473 жыл бұрын
Nice project, good idea, thanks for the video. I can't work that fast! 😁
@firelifeproject67553 жыл бұрын
I had the help of special effects LOL Thank you, and thanks for the support! I am just learning how to make videos but I have some new projects as soon as I get home.
@donnellclark10153 жыл бұрын
nice brother. theres a good feeling of accomplishment after u get done. i think i will start mine this weekend. built not bought!.
@firelifeproject67553 жыл бұрын
Awesome! You’re gonna love it. No more sore back or sore knees... thank you for your support and taking the time to comment. Please let me know how it works out for you.
@engleharddinglefester42856 ай бұрын
Man you are good with a stick welder.
@peterellis42626 ай бұрын
Nice idea
@rhondabailey4444 Жыл бұрын
Love the tunes
@firelifeproject6755 Жыл бұрын
Thanks so much !
@Busabuck1002 жыл бұрын
Nice cutting torch skill.
@firelifeproject67552 жыл бұрын
Thanks, I’ve had a little bit of practice
@mmg96757 ай бұрын
Love the music. Very Neil Young like.
@bnsf9161 Жыл бұрын
I made this. It works perfectly.
@bnsf9161 Жыл бұрын
Gloves are a must lol. It’s a kindling splitter and splinter inserter :)😂
@firelifeproject6755 Жыл бұрын
Definitely doesn’t hurt to wear gloves. I’ve used it quite a bit and haven’t had one splinter but I can definitely see it happening.
@gabriel96682 жыл бұрын
Great video. I wish I had all the tools to do it though
@TheHollabbeyHomestead3 жыл бұрын
Excellent!!
@firelifeproject67553 жыл бұрын
Thank you very much! It works awesome!
@TheZoeybear3 жыл бұрын
The time and the effort you put into this was impressive ! You could make a lot of money making and selling these because I would definitely buy one . Ps subscribing to your channel .
@firelifeproject67553 жыл бұрын
Thank you so much for your support and taking the time to comment! Thank you for subscribing as well. Honestly it’s refreshing to get positive feedback!
@TheZoeybear3 жыл бұрын
@@firelifeproject6755 your very welcome.
@joemccarthywascorrect62402 жыл бұрын
Great idea! The modification that I will make is cutting a well-fitted hole in the bucket, bolting the wedge plate directly to the wood, and slipping the bucket OVER THE WEDGE. This way, I can just lift the bucket and all the kindling and dump it into my kindling bucket all at once instead of having to pick them out and restock them. It is supposed to be a labor saving device, no?
@firelifeproject67552 жыл бұрын
That’s definitely great idea! That’s the modification I would make as well
@mikegb19692 жыл бұрын
yup no splinters up your nail getting it out the bucket ooucccccchhhhhhh
@MichaelSmith-hs5iu3 жыл бұрын
Don't get me wrong,.. I love the project it was just that never ending debarking session that needed a little editing. Actually, I have a similar method with an old fashioned Christmas tree stand with a wedge in the center and that sits inside an old garden tractor tire. It's set up so that I can split slab wood pieces. But, I like your idea a whole lot better and will be improving mine. Zo thank You for posting your method.
@firelifeproject67553 жыл бұрын
Well thank you for taking the time to watch and your support.
@davidatkins69193 жыл бұрын
Next time try cleaning the metal base to promote better welding adhesion and cut the base of the wedge flat to make the best connection; use used this type of tool on my farm some 50 years ago, Lincoln welder, old stell plate and a wedge from Producers Co-Op, made making kindling quicker and easier, great to see it used again, thanks!
@firelifeproject67553 жыл бұрын
Thank You!!
@2naturesownplace3 жыл бұрын
@@firelifeproject6755 keep it simple.. just use farmers rod.. AKA 6010 or 6011..designed to work on dirty metal and environments. Actually intended for use by farmers back in the day that would break down in the field.. 2 12volt batteries and jumper cables and weld away.
@firelifeproject67553 жыл бұрын
Yes I will do some videos with 6010 and 6011 for sure. I use 6010 quite a bit as I am a facility and a pipe fabricator welder in the oil and gas industry. Mostly used for root passes and hot passes. You’re right it does work good on dirty metal and filling gap.
@kristenmarie65633 жыл бұрын
Cool video!
@firelifeproject67553 жыл бұрын
Thank you! It is a really Good splitter!
@philbosshart7606 Жыл бұрын
Nice work man. The only thing I would adjust if I did it would be to make the base bigger and rip that bark off of it MUCH faster, but solid work my friend
@firelifeproject6755 Жыл бұрын
Awesome! Thanks for the feedback!
@johnwayne35542 жыл бұрын
Epic genius mode! 😎
@azoffgridoutdoors40012 жыл бұрын
Neat. I could definitely use something like this
@firelifeproject67552 жыл бұрын
It works really great and it saves the back
@comfort_in_discomfort3 жыл бұрын
Clearly not your first go around with steel and a welder. Nice to see measurement and squaring done during the tack welds. Looks great. What rod did you use and amps?
@firelifeproject67553 жыл бұрын
Thank you for taking the time to comment and thank you for your support! The roads I used ESAB 7018 3/32 and the amperage is about 80
@carlpenney9013 жыл бұрын
First time I seen anybody on youtube use a torch!
@firelifeproject67553 жыл бұрын
I know, it is a rare thing LOL Siri thank you for taking the time to comment and thank you for the support!
@dexobj3 жыл бұрын
Very nice idea. I've seen one similar to this from New Zealand in the past. Based on their design you could make yours safe by adding a "guard ring" above the blade. That way you would still be able to feed logs through the ring but your hand would be stopped by it.
@firelifeproject67553 жыл бұрын
you have a good idea and I’ve seen similar splitters as well. Thank you for taking the time to comment and I appreciate your support!
@charlesrobertbutler14464 ай бұрын
Looks like it works well. The only change I would make is to use a rubber mallet to avoid damaging the sharp edge of the wedge. Perhaps a short piece of wood would do the job as the mallet.
@firelifeproject67554 ай бұрын
It is a rubber mallet for that exact reason
@charlesrobertbutler14464 ай бұрын
My mistake, appologies.@@firelifeproject6755
@dcgbox3 жыл бұрын
I built one of these years ago and it's still running strong made mine an 8" length of a cylindrical pipe 30" off the ground on legs The kindal sticks just fall out the bottom.
@firelifeproject67553 жыл бұрын
That’s awesome! I definitely like this one but I think I’m going to build a new one and have a few more options on it. I’m going to build it out a steel. No wood the next time. Thanks for commenting and thanks so much for the support!
@rickmuha4278 Жыл бұрын
Nice 👍
@pamelamcintosh2363 жыл бұрын
Excellent idea! I am a kind of wing it girl myself lol We just bought our daughter and daughter-in-law a Kindling splitter because I thought these were ingenious tools 👍It’s for their camping trips. I wonder if I can sit in a bucket like your idea? I love that you stored the hammer in it too. Question what was the spray you sprayed on the wood piece? And what does it do to the wood.What is its purpose?TIA. Keep up the great work
@firelifeproject67553 жыл бұрын
Thank you for the awesome comments and thank you for your awesome support!. All I put on the wood with a little varnish in a spray can. I did it more for looks than anything. I was worried that you wouldn’t be able to see it on the camera. Some people have commented already that I didn’t seal the ends. My thought was that it’s always going to sit on concrete Or gravel and the top is covered by the bucket.
@firelifeproject67553 жыл бұрын
I think if you got a big enough bucket it might work.
@paintballmaster1012 жыл бұрын
THAT WAS GREAT
@firelifeproject67552 жыл бұрын
Thank you!
@firelifeproject67552 жыл бұрын
Thank you
@paintballmaster101 Жыл бұрын
@@firelifeproject6755 TODAY , I HAVE REPLICATED THIS SAME EXACT WOOD SPLITTER ! AMAZING DESIGN. now looking into smokeless firepits :D
@firelifeproject6755 Жыл бұрын
I’m glad you liked it!
@chrismoose646 ай бұрын
I like this a lot, though personally I wouldn't fix the bucket to anything. That way you can carry the kindling to the fire - or wherever you want to stack it.
@TheGoatShowMan6 ай бұрын
A good video and a great idea, but the video could have been half as long and still just as good. Brevity .... it's the soul of wit.
@Detman1012 жыл бұрын
Man...I wish I had your tools. I could do so many things if I just had more tools...
@bobaverage6 ай бұрын
Agreed
@A3Kr0n6 ай бұрын
I can't remember the last time I used kindling. I just use the crap you generate splitting the wood.
@keen96296 ай бұрын
Nothing will ever beat a sharp axe.
@andrewhamel57883 жыл бұрын
All I need is an acetylene torch and a welder...Maybe I can hire you to build me one? Cool tool.
@firelifeproject67553 жыл бұрын
Thank you very much! I appreciate your comment. I might not be in the same area as you but i’m pretty sure your local Welder will weld that for you for a case of beer. It is a great tool! Thank you so much for your support! I am away at work finally but when I get home I will be making more videos to help grow my channel.
@BBQDad4632 жыл бұрын
This looks like a really good idea. I bet the local machine shop could gin this up for me, lickety-split. Thanks!😎
@firelifeproject67552 жыл бұрын
Absolutely! Everybody’s been giving me a hard time because they consider not a do it yourself project. And I’ve mentioned to a couple of people they can find a local welder in town and I’m sure for a few dollars or a couple of beer he can weld a wedge on to piece a plate for whoever can’t weld or does not want to learn any new skills or simply doesn’t have the means to do it. Thanks for taking the time to comment
@hgj20193 жыл бұрын
Nice job! Only thing I’ll do different is paint the log ends.
@firelifeproject67553 жыл бұрын
Thank you for your support and thanks for taking the time to watch the video. I definitely should’ve painted the ends.
@hgj20193 жыл бұрын
@@firelifeproject6755 always the first thing to seal to help control splitting!😁
@firelifeproject67553 жыл бұрын
Yes, I totally agree.
@airgliderz2 жыл бұрын
No, don't paint them, the "Ace" RONCO auto wood splitter kindling maker..just leave wood sitting around logs start to split on there own.. :-) Why work hard when you don't have to...
@hgj20192 жыл бұрын
@@airgliderz well, aren’t YOU clever! You might have noticed at 11:30 he introduces a log from which he forms the base of the splitter. It is part of the TOOL, not the workpiece. Would you imagine that this base should be encouraged to split or stay fairly intact? THAT is the wood that, in my opinion, be protected from splitting. Of course, if you would prefer regularly replacing the base I encourage you to follow your misguided thoughts. Personally, once I build a tool I like it to last a bit but maybe you prefer regular rebuilds and repairs. Each to his own preference.
@budwilliams6590 Жыл бұрын
For the way you are using it, it would be a lot easier to plant a double bit axe in a chopping block and split off of that.
@firelifeproject6755 Жыл бұрын
Yes, definitely can modify it anyway you would like
@dprice39003 жыл бұрын
We just got a fire pit for our lanai. What a great idea! But why take off all the bark?
@ofwoden3 жыл бұрын
I’ve only heard the term lanai from the Golden Girls. Which Golden Girl are you?
@dprice39003 жыл бұрын
@@ofwoden my aunt called me Crystal Carrington!
@firelifeproject67553 жыл бұрын
you could leave the bark on but it might not last as long. thanks for the support!
@patriotrob70662 жыл бұрын
Now just put two ears on the steel plate. And bingo pew pew target done.
@firelifeproject67552 жыл бұрын
Lol
@wolverinegnr3 жыл бұрын
Do you know where you got that nice bucket from? Thanks
@firelifeproject67553 жыл бұрын
I got it from our local agriculture hardware store! Thanks for the comment and the support!!
@ronmccabe11693 жыл бұрын
If I made one, I think I would mount the plate directly on the post and make a hole in several buckets. Place the bucket on the wedge fill it, take it in the house, when nearly empty fill another bucket.
@firelifeproject67553 жыл бұрын
That’s a really great idea! I didn’t think of that. Definitely something worth looking into. Thank you for your support!
@warwicklewis87353 жыл бұрын
I like how your thinking. That is a really practical improvement.
@jondor6546 ай бұрын
A little fun ok , buckets with butterfly valves in the base
@budwilliams6590 Жыл бұрын
Should change the name of this to LOG PREPARATION.
@Deaner3D2 жыл бұрын
Guys...what if we put the axe...inside the bucket! (great idea, similar to what I have currently)
@fearlyenrage3 жыл бұрын
written with the intention to inform: When you would cut out a hole in the bottom of the bucket, with the form of the splitter you just could grab the bucket and move the kinddling where ever you want. Without having to fumble the wood out of the bucket twice. When that is attractive to you...
@firelifeproject67553 жыл бұрын
That’s a great idea. A few people have mentioned that. Thanks for taking the time to comment and hopefully you liked the video.
@mikeandersen52 жыл бұрын
Smart
@firelifeproject67552 жыл бұрын
Thank you!
@runforestrun30142 жыл бұрын
I can guarantee that at some point you're going to wish you were wearing a leather glove on the hand that holds the wood in place. I only know this because I saw Wranglerstar get the "mother of all splinters" using a similar device without a glove on. It was pretty funny because it happened about a second after he commented on how nice it worked and how safe it was.
@firelifeproject67552 жыл бұрын
Lol yes! I watched the same video and when I was building this I was thinking of him
@airgliderz2 жыл бұрын
LOL that's how all accidents happen, done this safely a thousand times,, hold my bear watch this....owwwwch -:)
@lylemorton86416 ай бұрын
Here it is 2023 and this just popped up. A good idea but there are cheaper ways to do this without the need of welding. Had to smile when the head banging music ended when the “sissy” battery powered chain saw appeared. Thanks though.
@bobd3089 Жыл бұрын
Did you weld that with 7018
@firelifeproject6755 Жыл бұрын
Sorry for the delay, I haven’t been getting my notifications from KZfaq. Yes everything I weld with is 7818. 3/32 or 1/8. It’s the best rod to use.
@wolverinegnr3 жыл бұрын
Where did you buy the axe piece? Thanks
@firelifeproject67553 жыл бұрын
Most hardware stores will have one just ask for a splitting wedge. Thanks for taking the time to comment and thanks for your support!
@_Common_Logic_3 жыл бұрын
Easy and FREE solution for those who don't have a torch kit or 3/8" plate Steele at their disposal... Use an old disk brake rotor. They are scrap and have no use after they're turned down. they're perfectly round, weldable, a better, weight and the holes are already drilled into them... Any hobbyist, farmer, automotive shop will have rotors laying around. They would also tack your splitting wedge to it for a couple of bucks whereas, you might have trouble getting someone to fabricate the entire metal disk for you You could get your own together in less time than it took to watch this video ;-)
@firelifeproject67553 жыл бұрын
Definitely other solution for replacing the plate. Probably won’t look as nice though. Thanks for taking the time to comment. The video was a little long and I’m just new at making videos. I guess you could always use the fast forward button.
@_Common_Logic_3 жыл бұрын
@@firelifeproject6755 - I'm not sure what the aesthetic issue would be when the disk is painted and in the bottom of the rubber bucket... It would look no different than yours. A removeable chisel head (for easier sharpening) might be something to consider on the 2.0 version if you're going to use it a lot. There's always more than one way to skin a cat. (and get rid of those damn brake rotors). ;-)
@firelifeproject67553 жыл бұрын
I’m not saying there isn’t. I have definitely got a lot of good criticism since I uploaded this video and I am all for looking at different ideas. I’ve just never seen a breaker rotor that small. I’ve had trucks all my life and I’m not a mechanic. The bottom of that bucket has a 7 inch diameter. You could definitely go to a bigger bucket as well. Being able to unbolt the wedge and sharpen it is a great idea. To sharpen it in place is also really easy.
@_Common_Logic_3 жыл бұрын
@@firelifeproject6755 - Damn, that's a small bucket, and yeah, your 12" truck rotors are gonna be a problem... We see a lot of 9"(approx) car rotors here... in addition to that, if you flip the rotor so that the "top-hat" is facing down, the full diameter of the rotor would be raised a couple inches in the bucket where the diameter is larger. I'm not sure what you used, but this was my choice. www.masterwholesale.com/rubi-rubber-bucket-88911.html They are black, and are made of the strongest corded rubber imaginable as to be stepped on by cows or chewed on by goats... Freeze-proof too if you are leaving it outside. I'm going with one of those and figure it will last a lifetime of abuse.