DIY Making PCB At Home: No Heat Needed! ( Toner Transfer Method )

Рет қаралды 23,648

6 ай бұрын

DIY Making PCB At Home: No Heat Needed! ( Toner Transfer Method )
Hello everyone, in this video I will show you how to make your own printed circuit boards (PCBs) at home using the toner transfer method with an acetone and isopropyl alcohol mixture, no heat is needed for the toner transfer, no iron or laminator. This method provides a cost-effective way to create custom PCBs for your electronics projects.
In this video, I'll walk you through the entire process, from preparing the copper clad board to etching the circuit.
..............................................................................
Support me on Patreon: www.patreon.com/user?u=17351593
Creality Ender 3 V3 SE: affiliate.geekbuying.com/deep...
Use coupon code and have 20% OFF: NNNDEV3SE
................................................................................
Materials You'll Need:
Copper clad board
Laser printer
Glossy paper for laser printers
Acetone and isopropyl alcohol
Etchant solution (like ferric chloride)
Safety equipment (gloves, goggles, etc.)
Cleaning supplies (paper towels, cotton swabs, etc.)
.................................................................................
Don't forget to give this video a thumbs up if you found it helpful, and consider subscribing for more DIY electronics tutorials. Share this video with fellow enthusiasts who might find it useful. Thanks for watching!

Пікірлер: 26

@xfxox 3 ай бұрын

4:12 it is literally said "ACETONFREIER" there is NO ACETONE in it. its ETHYL ACETATE

@DheerajSinghal01 4 ай бұрын

Thats a very good way of making PCBs. Will definitely give it a try

@tomxu1761 2 ай бұрын

really nice way and would like to try it. Thanks for sharing

@thesyfyguy Ай бұрын

You should try photo etching boards.

@Patrick-qe1ui 2 ай бұрын

Good Job 👍

@MdNasir.786 6 ай бұрын

Easy way to make PCB thanks brother

@HMProjects 6 ай бұрын

You're welcome!

@raymondmichael4987 6 ай бұрын

I found this very straight forward, will suggest part 2 for double sided boards and also include the mixing ration for the itching solution , Thanks mate :)

@HMProjects 6 ай бұрын

Hi, thanks. I have made it before but I had to delete the video due to music copyright claim, definitely I will it again for double sided pcb's, as for the etching solution I bought it pre-mixed but usually the ratio is 4:1 water to ferric chloride powder.

@parisiadrian 6 ай бұрын

Great video, does it helps for the transfer if to this same technique, alcohol and acetone, yo also add heat? or should I chose only one of those options?

@milivoltnet 6 ай бұрын

good job!👈

@HMProjects 6 ай бұрын

Thanks!

@easy_3d 2 күн бұрын

I tried this with nail polish remover and hand sanitizer, im using a samsung ml2161 laser printer, it failed, how mistake did i do? Should i try with other laser printers??

@music3121 4 ай бұрын

Which type paper used and gms ?

@wernerviehhauser94 3 ай бұрын

Yours look great! I tried that a few times, but could not get it to work. Transfer was incomplete and did not stick well. I went back to phototransfer and CNC.

@audioaiindo 2 ай бұрын

U cant do this,using ink jet printer, only laser printer can do this

@murraymadness4674 2 ай бұрын

My Laser Printer toner is not effected by acetone, so this does not work. Not a problem though to just use an iron to xfer it.

@doooddemo 6 ай бұрын

Hello, I hope you will see my comment, please make a charge level indicator like industrial power banks on the OLED display and show the number of watts when a load is connected, I Now I’m making a power bank and like many people I would like to see your work 😊 I am sure that it will not be just an analogue, but a direct replacement for a store-bought one, since you will definitely be able to make a very functional and cool gadget.

@HMProjects 6 ай бұрын

Hi, that's a good idea, maybe I will do it in the near future but for now I have some other projects that I have to make.

@doooddemo 6 ай бұрын

@@HMProjectsok, this will be one of the best screens for a power bank, if you need a design of the elements, I can send it to you by email 😅