DIY Neon LED sign NO Soldering

Рет қаралды 452,128

2 жыл бұрын

This is just a video of how I make neon signs. This was my second attempt. I still need some practice to get better at it, but here it is. Thanks for watching.
www.etsy.com/shop/MakerDecor
/ makerdecor_
The links below are Amazon Affiliate Links and I may receive a small fee if items are purchased through links.
LINKS BELOW
makerdecorations.com/tools/
makerdecorations.com/led-link...
makerdecorations.com/led-links/
Neon LED Strip amzn.to/3oHFPbN
Power Supply amzn.to/3cVNrEV
2-pin Light Strip Connectors amzn.to/3vryzF2
Neon LED Strip Light amzn.to/3oKzI6K
2-Pin 8mm LED Strip to Wire Connector amzn.to/3oIce1U
20 Gauge 2 Conductors Red Black Wire amzn.to/3JhzJIR
22AWG Wire Cord for Single Color LED Strips amzn.to/3PPZWkd
10Ft Outdoor String Lights with 11 Clear Edison Bulbs amzn.to/3BsNpPi
Wire Stripper 10-22 AWG Wire Splicer Cable amzn.to/3St3vyD
Utility Knife Box Cutters amzn.to/3zMuttx
Gorilla Super Glue Gel amzn.to/3zptqye
Solderless LED Tape Light Connector amzn.to/3zhuJzg
RYOBI One Jigsaw amzn.to/3cX9tr5
Ryobi Airstrike Brad Nailer Kit amzn.to/3Q5kF3L
Ryobi 16 in. Corded Scroll Saw amzn.to/3OOdf3g
Panasonic LUMIX GH5 4K Mirrorless Camera amzn.to/3cPUD5D
Kreg Pocket-Hole Jig 520PRO amzn.to/3zeMT4I
Pipe and Drape System amzn.to/3PUxWfd
Faux Pampas Grass amzn.to/3Qa1h53
Balloon Blower Pump amzn.to/3BAgJ6q
Decorative Vintage Wood Garden Wagon Wheel amzn.to/3PRbTG6
Sanding Sponge amzn.to/3SfbMps
Trigger Clamp Set amzn.to/3BEzgOS
RYOBI 18V Brushless Cordless Circular Saw amzn.to/3POjCVB
Ryobi Cordless 2-Tool Combo Kit amzn.to/3OIMRaY
90 Degree Corner Clamp amzn.to/3bltIy4
12 Pieces 20"x 20" Artificial Boxwood grass amzn.to/3zGFueT
Steel Spring Clamp amzn.to/3oFT9h7

Пікірлер: 373

@CocoChanta0722 Жыл бұрын

As a crafter and a balloon decorator, I’m Truly appreciative of ALL of your videos. Thanks!!

@MakerDecor Жыл бұрын

Thank you so much, I appreciate you taking the time to comment and watch my videos.

@carolwargin8160 2 жыл бұрын

Love watching you create these signs. Thank You for the list of products.

@MakerDecor 2 жыл бұрын

Thank you for watching and commenting!

@nikkireed4281 2 жыл бұрын

You are my absolute hero! After trying the soldering method and giving up 6 months ago, I am now ready to try again. Thank you so much!!!!!

@MakerDecor 2 жыл бұрын

Hi, thanks for watching. Yes I tried the soldering method once and burned my finger lol. I do want to learn it eventually just because I love learning new things. But this is way easier for now and for what I use it for. Thank you!

@Bobster986 2 жыл бұрын

Looks great! Maybe try black plexiglass so you don’t see the wires. It’s nice to see you’re using a coping saw and not some $10,000.00 laser on the plexiglass. Thanks!

@MakerDecor 2 жыл бұрын

Thanks for watching, lol yeah maybe someday Ill get that laser though!😅

@ebaybae3575 2 жыл бұрын

Thank you for the close ups! I truly appreciate it! Takes the guess work out of what goes where. I feel so empowered now:). Blessings to you, you made this look so effortless.

@MakerDecor 2 жыл бұрын

Hi thanks for commenting. I am glad this video helped you.

@sarareavely6212 Жыл бұрын

Thank you so much for this! I've been wanting an 80s food court/mall inspired neon sign set for years and nobody sells anything like it so I was like "fine I'll do it myself" but have no idea how to solder and it scares me, so thank you for this!! I can finally have my squiggly lines and geometric shape lights :)

@MakerDecor Жыл бұрын

Awesome, good luck!

@reviewsjustcuz1437 Жыл бұрын

Good luck. Soldering is alot easier than it looks. I made a led light board with led strips and soldered it my first try agter watching a video.

@lizethcollins8560 Жыл бұрын

First time watching your videos ! Omg you’re not only giving away so much information but your vibe and the way you work is exceptional! Thanks for sharing this ! 😁

@MakerDecor Жыл бұрын

Thank you so much for your comment. It takes a lot of work to put these videos together. I am glad I was able to share some good information.👍

@staciv7579 Жыл бұрын

This has been the best video so far and I’ve watched them all- on neon led sign. Thanks!

@MakerDecor Жыл бұрын

Hi, thank you so much I am glad my video has helped you. I appreciate that!

@GeoGirrl 10 ай бұрын

So cool that you test each step. You're very thorough at explaining each step.

@MakerDecor 10 ай бұрын

Thank you so much, glad this video has helped!

@bosslady9717 2 жыл бұрын

Beautiful is the word that comes to mind. Once again thanks for sharing.

@melvinabrand5225 Жыл бұрын

This was so detailed and comprehensive. Thank you!

@MakerDecor Жыл бұрын

Thank you, I appreciate it! Thanks for watching!

@stephey Жыл бұрын

I really value what I’m learning from watching you share your creative process-Cheers!

@MakerDecor Жыл бұрын

Hi, thank you very much. I am glad my video has helped you

@leemarson7350 Жыл бұрын

Thank you for the video! Definitely a more straightforward simpler approach to some videos I have recently watched. 👍🏻

@MakerDecor Жыл бұрын

Thank you, glad I was able to help!

@DamarisV 2 жыл бұрын

This is super cool. Thanks for sharing.

@mrobertaw68 2 жыл бұрын

Love this thanks for sharing ❤️

@Evjnfaith 2 жыл бұрын

This has really helped me a lot! Thank you so much

@MakerDecor 2 жыл бұрын

Thank you for commenting, I am glad I was able to help!

@evie_uk 7 ай бұрын

Amazing. Thanks for sharing your skills!! Ive been looking to buy a sign for my wedding and they are like £300/400+ and definitely not in our budget sadly ... but now im hoping i can make this with the help of my dad 🙌

@assthenaa 2 жыл бұрын

Nice !!! Thank you for sharing

@airstyles4409 2 жыл бұрын

Wow! Thank you for sharing, I’ve always wanted to know this…

@MakerDecor 2 жыл бұрын

Thanks for watching!

@AyeYoJazz 2 жыл бұрын

I will definitely be attempting this soon! Been wanting to make one for AGES and this just gave me the motivation I needed. I'm just concerned with how I can cut the plexiglass with no tool and also knowing where to cut and make connections in my design as well as what to use to cut the holes to bring the wires through the back. Hmm 🤔 I need to find a wire that I can change the colors and brightness as well

@MakerDecor 2 жыл бұрын

Hi, You can also make your design around the shape of plexiglass you get. Most come in a rectangle shape. I have seen people make them with out cutting the plexiglass or you can outline the rectangle with LED neon lights as a border. Just throwing some options I have seen. Where to cut and make connections is easiest when you draw it on paper first and look at where it is best to cut and where you maybe dont need to cut and get away with it. To cut a hole through the plexiglass for the wire, you will most likely need a drill depending on your design. Good luck and thanks for watching!

@MM-bw1lo Жыл бұрын

I buy so many of these, it's time I get started and just create my own, this was very helpful, thanks alot!

@MakerDecor Жыл бұрын

Thank you for watching and good luck!!

@bigdaddyprofit Жыл бұрын

Been looking for a capcom or tekken neon sign, having not found one, this is a great alternative and seems simple enough. Thank you

@MakerDecor Жыл бұрын

Hi, yes its pretty simple with a little bit of practice. Thanks for watching!

@veronicasantoyo2545 10 ай бұрын

Everything that is listed above is that all we need so excited to make one❤

@MakerDecor 10 ай бұрын

Awesome, I have this other video as well that shows it step by step in real time. Good luck kzfaq.info/get/bejne/gs-ZYLJ007WpfHk.html

@squeakysadventures405 2 жыл бұрын

Your a Genius Sr! God bless that beautiful brain of yours 🧠.

@MakerDecor 2 жыл бұрын

Thank you very much for your kind words!

@kittenhorde4022 2 жыл бұрын

Super awesome. Nice job.

@MakerDecor 2 жыл бұрын

Thank you very much!

@kenryglam951 2 жыл бұрын

Never knew this was possible until now, I think I’ll try it.

@MakerDecor 2 жыл бұрын

Thanks for watching and good luck!

@adabetelbeck5858 Жыл бұрын

That’s beautiful!

@MakerDecor Жыл бұрын

Thank you very much!

@jseehowitsbeen3177 Жыл бұрын

Great video! Love what you made.

@MakerDecor Жыл бұрын

Thank you very much!

@andreacline7141 2 жыл бұрын

I have watched this video a few times but, still don't believe I can make this. You are so good at making this kind of art. Thanks for sharing your brilliant ideas. Happy New Year!

@MakerDecor 2 жыл бұрын

Hi thank you, Happy New Year! The first one was tough figuring if it would even work. The second one was a lot easier. I am hoping to make a smaller example one, live so people can see it in real time example. I will probably just do a small word or something, hopefully soon. Thanks for watching and commenting.

@dmeeksy 2 жыл бұрын

Hi, what machine did you use to cut the plexiglass?

@MakerDecor 2 жыл бұрын

@@dmeeksy Hi thanks for watching. The machine I used to cut the plexiglass was a scroll saw. But I know you can use a couple of things to cut plexi glass. The main thing is the plexi glass cant be too thin. Thin plexiglass can crack easy when cutting due to the strong vibrations of the tools. If you do attempt to cut thin plexiglass cut slow and support it as best as you can. The thickness of this one I cut was .220 and it cut it easy.

@cherlynbolden8502 2 жыл бұрын

@@MakerDecor I love this. I need HAPPY BIRTHDAY made ASAP

@ossiehalvorson7702 2 жыл бұрын

Certainly not with that mindset! I'd avoided learning mechanics for years because I was so sure I couldn't do anything besides the most basic maintenance. Learned helplessness, basically. Hit a rough patch a couple years ago where I flat couldn't afford a mechanic, but my water pump went out. Had the tools, had just enough for the kit, had no choice but to give it a go. I've now replaced the water pump/timing belt, power steering pump, alternator, spark plugs, and did a valve adjustment with nothing but a field service manual, KZfaq videos, and some relevant forum posts. My car runs like a dream again despite being at 268k miles. Don't sell yourself short. It's not magic, as mystical as it can seem before you push yourself to start.

@jacobgarb1819 5 ай бұрын

Brilliant brother 👏 great work meant ship and may your business thrive and creativity expand

@zeronouveau 2 жыл бұрын

This is very helpful! Thank you so much!

@MakerDecor 2 жыл бұрын

Your welcome. Thanks for watching!

@zeronouveau Жыл бұрын

@@MakerDecor I have a question, how do you know where to cut and connect with the font you use?

@MakerDecor Жыл бұрын

@@zeronouveau Really I dont, I just kind of plan it out as I go. The first sign I made I cut and connected a lot. So with this one I tried to avoid making so many cut and connections. So where I felt I could get away with just bending the wire, I did. So like the "e" I just folded it instead of cutting it to save time. It does look better with more cuts and connections, but this was way easier with less cuts. And I like the way it came out. Hope this helps.

@zeronouveau Жыл бұрын

@@MakerDecor One more question: how did/do you get the black end of the neon strip that connects to the power source to be behind the acrylic?

@MakerDecor Жыл бұрын

@@zeronouveau Hi, I have only thought of three choices. Drill a big enough hole for the end to pass to the back. I have done that, didn't like it. Second cut the wire, drill a small hole and run the wire. Then reconnect the wire and seal it. Done it, didn't like it. The third option is to just leave it hanging low from the front? Hope this helps

@tallgirlswagg Жыл бұрын

Great job. Ty for sharing

@MakerDecor Жыл бұрын

Thank you!

@LoganLovell Жыл бұрын

Great vid! My fiance was bummed because all of the ones we saw on etsy were more expensive than she anticipated. I'm going to make one for her as a surprise. I've just got to find a way to make it look like part of my current project so she doesn't find out 😂

@MakerDecor Жыл бұрын

lol, same happened to me for my original one. Good luck!

@PrestigeAceYT 2 жыл бұрын

This was such an awesome video! I would love to learn more on how to do this type of work. Perhaps if you haven't already, maybe make a tutorial like at normal speed. Maybe a series or something? I think I just found my new hobby.

@MakerDecor 2 жыл бұрын

Thanks, I do have this video that has it slowed down a bit. kzfaq.info/get/bejne/gs-ZYLJ007WpfHk.html

@PrestigeAceYT 2 жыл бұрын

@@MakerDecor Awesome! Thank you very much. I can't wait to check it out during my free time. I subbed and turned on notifications by the way. Also if you haven't opened a shop yet for all these Decor LED Neon Signs, consider doing so! I know I'll definitely buy some (assuming they are reasonably priced maybe $25 - $35). Maybe even add a custom option for ones you haven't made yet and whatnot. Charge $50 for it. I don't know man. I just see so much potential in your content. I hope you have a wonderful day bud!

@brokenunicorn1 Жыл бұрын

So good explained, now it seems even posible haha. Very friendly soul, nice nice

@MakerDecor Жыл бұрын

Thank you very much for your comment! I am glad you liked the video.

@krg038 Жыл бұрын

Thanks for this. LED is such low power I used super fine wire with no outer insulation. #24. Glue it down seperated and its invisible. Soldering is much less expensive than connectors. Its easy.

@MakerDecor Жыл бұрын

Yes I need to practice soldering more. Hopefully soon, thank you

@MarqueMedia Жыл бұрын

Thanks for this! I feel much better spending $200 for the sign I want now 😋

@MakerDecor Жыл бұрын

Yes, professional is always better for sure. Yes you can find a lot of small to medium size signs starting at $200+ with no headache.

@Fancylooks 2 ай бұрын

Wonderful work and idea

@MakerDecor Ай бұрын

Thank you!

@scotadair8701 2 жыл бұрын

Can u please give me a list on what I need to make a neon led sign thank you looks so cool

@pathofprophecy Жыл бұрын

Great video! Where did you get your stencil/font pattern from?

@youknow720 9 ай бұрын

would you mind linking the exact products you used just for this video? i see you linked all the different types of products you use in your description box, i just wanna make sure i have my amazon cart correct so i dont buy things i dont need! this is a great tutorial by the way, by far the best ive seen on youtube!

@YD_Fiesta Жыл бұрын

Amazing video broo thank you. I will buy my own and I will purchase my items from your bio links

@MakerDecor Жыл бұрын

Awesome, appreciate the support!

@jakewilliams622 8 ай бұрын

What are the electric connector clips called?

@michaelmeisenhelder2000 10 ай бұрын

Great video for sure! Not sure if I overlooked it or not bro, but please link the jams. What artist and track do you have running on this?

@eliotkdna 9 ай бұрын

Hello. Donde compras todo el material o donde se puede conseguir al igual que la herramienta y muchas gracias por compartir tutoriales ❤ Hola. So where can I get the materials and what’s the names of tools you used. And thank so much for share all this information 😊

@Tobehonest_1 8 ай бұрын

Do you have a list of supplies by chance? I’m in Australia so might have to do some research

@yizzl3 8 ай бұрын

I’m a little bit confused how you are connecting the tubing through the middle of the sign using the clips? Seems like a challenging angle! I have access to soldering equipment so I’m wondering if that might be the better route, but I’ve only seen videos with laser cutters so I’m glad to know I can just use plexiglass!

@castro6063 2 жыл бұрын

Hi, I have been just so grateful for your detailed videos. I enjoy all of them. Can you tell me where you purchase the 2 pin wire but with the white coating that you have in the beginning of this video please. Thank you.

@MakerDecor 2 жыл бұрын

Thank you so much for commenting and watching. Here is the product I used with the white coating. www.amazon.com/dp/B08FMMD6BN?psc=1&ref=ppx_yo2_dt_b_product_details

@searchindex3438 2 жыл бұрын

AWESOME 🤩

@MakerDecor 2 жыл бұрын

Thank you very much!

@frittelindahl 2 жыл бұрын

You arr the best of this 👍👌

@MakerDecor 2 жыл бұрын

Thanks for watching and commenting!

@kerrycorcoran4885 Жыл бұрын

Appreciate the detailed walk-through. Can you tell me how you created your stencil and tiled across regular paper?

@MakerDecor Жыл бұрын

Hi, you can use programs such as Photoshop, inkscape, canva, etc. It is different for each one and it usually takes me a lot of trial and error, print and reprint. I dont have an exact method and try different ones till it works out. But when I do get it to work out I save it, lol. I am still just a beginner with those programs and just learn as I go.

@elizabethgrady9883 Жыл бұрын

Thank you so much for the video. I'm a subscriber to your channel and I love what you are doing. What program did you use to print out your sign template you taped together?

@MakerDecor Жыл бұрын

Hi, thank you so much. I have used a couple of different programs from Photoshop to Canva. Haven't really found an easy option yet.

@luminialed6471 11 ай бұрын

WOW! Nice Video！

@MakerDecor 11 ай бұрын

Thank you very much!

@rabiaak8763 Жыл бұрын

Thank you so much for your detailed video Im gonna try this soon this was the perfect timing to watch your video Your awesome.🙌 How thick was your plexiglas?

@MakerDecor Жыл бұрын

Thank you very much. The plexiglass I used was from Home Depot and was .220 thickness. About a 1/4 inch thickness. The thinner plexiglass will crack much easier.

@Misschief_ Жыл бұрын

This was a super dope video & it gave me a lot of pointers when I go make my own... However if you ever make a new vid of this, could you show more in depth when u drill the holes to loop the wiring thru? Thats the only thing I'm a lil weary on... Appreciate this vid‼️ Blessings.

@MakerDecor Жыл бұрын

Thank you and will keep that in mind for the next time I create one!

@kimberlinslaughter3187 Жыл бұрын

Hey! Love this video! You inspired me! Is it possible to get some info on how to connect a power supply? I have tons of cord left from my first project

@MakerDecor Жыл бұрын

Hi, thank you very much. I have done it before but haven't made a video on it. Pretty simple just attaching the matching wires together. I hope to make a video on it soon, thanks

@bobbygarcia5702 2 жыл бұрын

Awesome!!!!!!

@MakerDecor 2 жыл бұрын

Thanks!

@christisstanley2348 Жыл бұрын

AMAZING!!! I've always had them custom made with the glass tube, its been a while. I'm going to look at the slower video and may try it. Whats the worst that can happen, I get shocked or blow a circuit? Thanks so very much for sharing.

@MakerDecor Жыл бұрын

Hi, that is difficult. They do have neon lines that change color but I have not been able to create a sign with it yet. I have tried once to do a color changing sign. I will have to try it again soon.

@TimaDheere Жыл бұрын

Wooow. Thanks man

@MakerDecor Жыл бұрын

Your welcome! Thanks for watching

@uplecsolutions7063 2 жыл бұрын

Definitely easier to let the professionals do it!! ;)

@MakerDecor 2 жыл бұрын

Hi thanks for watching. 👍

@bbyl0v3_designs Жыл бұрын

What size shrink tubes do you use to link the back side?

@kevinsloan5805 Жыл бұрын

Thank you this is awesome! How do you connect the sign to a power supply? That's the only thing I'm wondering about

@MakerDecor Жыл бұрын

Hi, thanks. Here is a video that covers a lot about the setup kzfaq.info/get/bejne/gs-ZYLJ007WpfHk.html

@kevinsloan5805 Жыл бұрын

@@MakerDecor perfect thank you

@bbyl0v3_designs 9 ай бұрын

What type of blade do you use for the scrollsaw to cut the acrylic?

@MakerDecor 9 ай бұрын

For my scroll saw I use just generic blades. But have to replace often as they get dull cutting.

@saiprabharamani8161 Жыл бұрын

Hello. Love your videos. You make it look so easy. Can you pls let me know what the machine is to cut the plexiglass?

@MakerDecor Жыл бұрын

Hi, thank you so much. I have used the scroll saw, but you can also use a jigsaw with a plexi glass cutting blade. The main thing is it has to be thicker plexiglass, because the thinner one will crack easier when attempting to cut.

@FknNefFy 2 жыл бұрын

I feel like a black back cord would be better than white…. Thanks for all this!!

@MakerDecor 2 жыл бұрын

Thank you for watching, Probably right.

@ddia403 2 жыл бұрын

thanks and u look so cute ✨

@MakerDecor 2 жыл бұрын

Thank you so much for watching and commenting!

@user-ue2so9ct3n 6 ай бұрын

nice .. what font are you using ??

@toricullen1281 2 жыл бұрын

Thank you so much for your tutorials. I'm a little confused on cutting the LED wire. When you get it on thew black dots, do you just cut the softer part and leave the middle connection! Or do you cut straight through? Thank you so much (:

@MakerDecor 2 жыл бұрын

Hi thank you so much for watching. Yes cut all the way through. Then peel back some of the soft part to expose the connectors. I have another video which shows the process better. Here is the title "Closer look at LED Neon connectors, solderless NEON LED signs" Thank you!

@RoninsCorner 2 жыл бұрын

The LED strip has a black mark for the solider connections that shows through. You have to cut through the rubber/plastic defuser and the led tape. Once cut you will see to golden (sometimes silver) dots on each side of the strip. This is where the positive and negative go to pass electricity though the LED wire to light them up. You can solder or you can use the clips like this tutorial (which I didnt even know they made). Hopefully this helps Tori.

@juventinocontreras7652 Жыл бұрын

Hola buenas noches una pregunta que programa usas para maximizar tus palabras para el letrero... En neón Flex..

@sslight Жыл бұрын

wow good~~👍👍👍

@GodGirlP 10 ай бұрын

HOW did you Design and Print out That Paper? ( The Outline.)

@karlagoodrow 2 жыл бұрын

Hello there. Thank you for this video and the others! What piece do I need to connect the end of the light to the adapter? I noticed you have a connector of some sort that you attached to adapter but don't see that piece in any of the link. Does it come with the adapter pack you linked? How would I go about connecting the wire on light to the adapter?

@MakerDecor 2 жыл бұрын

Hi thanks for watching. When you purchase the LED light it has a small piece on one end of the LED that is the female connection. Then you purchase the Adapter amzn.to/3zlsGKj to the female connection, plug in and it lights up. The LED tubing only comes with the one connection at the end of the line. I believe that is what you are talking about. All you need is the neon tubing which comes with the female connection at the end. Then the adapter which comes with the male connection, and they connect to each other. Hope this helps and please let me know if there is anything else I can help you with!

@karlagoodrow 2 жыл бұрын

@@MakerDecor thank you!

@StrictVisionAthletics 2 жыл бұрын

What are those 2 hole connectors called?

@MakerDecor 2 жыл бұрын

@@StrictVisionAthletics Hi, thanks for watching. The item name is 2-Pin 8mm COB LED Strip to Wire Connector Unwired Clips Solderless and the link is in the description of where I purchased mine, Amazon

@juanrodas1683 Жыл бұрын

How thick is the acrylic?

@deepalisjain 6 ай бұрын

Can we make these neon signs color changing options. What ever color we need we can get in one sign?

@maau6179 2 жыл бұрын

Another great tutorial. Question though, does neon lights come in changing colours, I can picture the bride to be changing it to white for one event and possibly pink for another event. @

@MakerDecor 2 жыл бұрын

Hi, thanks for watching. I am not sure if they come in changing colors. I know they come in different colors but not sure about changing with a remote. That would be a great idea. I am going to have to look into it for my next build.

@gdellapple7564 2 жыл бұрын

Hi Ben! Thank you for the video! I wanted to make one for my best friend . How thick should the plexiglass / acrylic glass be for me to drill a hole for the wire so that it doesn’t crack. 🙏🏻

@MakerDecor 2 жыл бұрын

Hi, thanks for watching. The thinner the plexiglass the easier to crack. I used .220 size which is almost 1/4 thick from Home Depot. The thinner the drill bit hole the less chance of cracking. Just make sure it is fully flat on a surface or piece of wood so its supported good. Then drill slow with a thin drill bit. I have drilled through a couple of plexiglass and only had one crack. But I just pulled the bit out slowly, put in reverse and went through. The crack was minimal, so I was lucky and I was able to still use it. Good luck!

@gdellapple7564 2 жыл бұрын

@@MakerDecor Thank you Ben ! Okay I’ll try to get 0.22 inch plexiglass or thicker! And I’ll surely let you know the result. Thank you again for the tips! ❤

@jessicadominguez2398 2 жыл бұрын

Hi! Thanks for your tutorial! I’m having a hard time with the gluing process! Nothing seems to make it stay in place. Help!

@MakerDecor 2 жыл бұрын

Hi thanks for watching. Are you using plexi glass and the super glue I used in the video? With those combinations it stuck with in 15 seconds? I also created A video that was in real time showing the gluing process a little bit easier. kzfaq.info/get/bejne/gs-ZYLJ007WpfHk.html Also just asking did you take off the plastic that covers the plexi glass? Let me know if there is anything else I can help you with!

@articehunter7249 2 жыл бұрын

Good afternoon, thanks for sharing this awesome content! What are you using to cut the acrylic sheet? I am hosting a wedding in June and I was inspired by your video to create a sign for my backdrop and champagne wall. Thanks!

@MakerDecor 2 жыл бұрын

Hi thanks for reaching out. I used a scroll saw to cut the acrylic. You just need to make sure you get the thicker one, the one here was I believe .220. I bought mine from Home depot and their is usually a thin one and thicker one. The thin one is easier to crack due to vibration. The thicker one is easier to manage. I have also seen people cut the acrylic with a jigsaw which is a cheaper tool. But go slow to avoid cracking acrylic and wear safety gear to be safe. Good luck.

@articehunter7249 2 жыл бұрын

@@MakerDecor Awesome sauce! I appreciate the great information. I will research both saws and see which one would be a good starter for me. I declare much success with your business and thanks for sharing your thoughts and experience!!

@phillismit7063 Жыл бұрын

@@MakerDecor Hey - thanks for the video. I wanted to know what blade you used on your scroll saw. I have tried with the very fine blades, but it seems to just melt the plexiglass when I cut it, and if I go any faster the plexi breaks. Thanks again

@MakerDecor Жыл бұрын

@@phillismit7063 Hi, yes I use general purpose blades. The fine blades are too thin and allow the plastic to melt because it is not removing a lot of the plastic between allowing it to just melt with the heat from the blade. Yes going fast will crack the plexi glass, Also if you blade is dull it will make it more difficult to cut and will cause the cut not to be clean so it will melt back together. I am planning to make a video on this topic this weekend. As I get this question a lot. I will be covering how to cut it with a jigsaw and scroll saw, along with the blades and speed that create the best chance of not cracking the plexi glass. Hope this helps.

@AC-sn7fz Жыл бұрын

@@MakerDecor Hi! Thank you so much for answering these questions! I was also wondering about the blade you used. Did you ever end up making the video on how to cut the plexiglass with the jigsaw and what speed you used for the scroll saw??? Thanks again! Love you videos!

@user-kt5bf9sr3f 5 ай бұрын

Hi if I make this neon lights signs can I pour resin on it to cover it????

@juanayala8494 10 ай бұрын

Awesome video. Does the connector that goes from the lights, and connects with the power source included with the power sorce, or did you have to buy it separately?

@NickMoises04 10 ай бұрын

It should be included when with the lights

@juanayala8494 10 ай бұрын

@@NickMoises04 got it, thanks

@victoriarodriguez4722 2 жыл бұрын

Hello, love the tutorial. How long did it take you to complete this project?

@MakerDecor 2 жыл бұрын

Hi thanks for watching, in total for the sign probably less than hour and half. I was in no rush. I have also a video I uploaded in real time I believe 25 min for the heart LED.

@nicholacook6315 11 ай бұрын

Can you attach a list of items you used on this please and what the clips are called that connect the connectors please 😊

@KellyRhoads 7 ай бұрын

What kind of acrylic sheet did you use? There isn't one included in your list in the description.

@yousufismail3983 2 жыл бұрын

Hi! I really like the font, what font did you use for the project? Thank you

@MakerDecor 2 жыл бұрын

Hi thanks for watching. I used Madina font.

@amybourke1385 Жыл бұрын

Love your work ❤️ What is the machine you cut the clear board?

@MakerDecor Жыл бұрын

Hi, thanks for watching. I cut the acrylic plexi glass with a scroll saw.

@itzelescalante8845 2 жыл бұрын

I LOVE IT! THANK YOU SO MUCH FOR SHARING!! how much did you ended up spending on the materials? Please and thank you

@MakerDecor 2 жыл бұрын

Hi thank you very much for watching! Materials I used are in the description above. Just a guestimation, outlet plug $12, LED $20ish?, Plexi glass $30ish, Glue $5. But to have one made for this size I was seeing close to $200 so for me it was worth the risk to see if I could make it. And it was fun because I like making things. Thank you.

@LyndsayIan Жыл бұрын

Do you also get the plexiglass on Amazon? Do you have a link for that as well?

@craigmonteforte1478 Жыл бұрын

these things are pretty Cool , thanks for posting the how to Video what are those Clips called ? BTW i’ve also had a lot of Success with that Gorilla Glue on severalProjects i’ve built

@MakerDecor Жыл бұрын

Thanks, they are called 2 pin LED strip wire connectors? I have never used gorilla glue except for this and it works great. One problem is that it only works so far with this brand of neon lights. I have tried it on two other ones and it doesn't have the same holding power? But for this application, there still holding strong over a year later.

@shayliugolini9125 Жыл бұрын

What drill bit do you use?

@tetelovakalisa3563 3 ай бұрын

Which machine do u use to cut Acrylic board?

@qveenshareece 2 жыл бұрын

awesome ! i want to start selling these for my business. can I use a multicolored led light strip and buy remotes for each project ? or is it just best to buy different colors individually ?

@MakerDecor 2 жыл бұрын

Hi thanks for watching, I have not tried to use multi-colored lights yet. I imagine they work the same. Just a tip, if it is more for business I would look into soldering the connections as that would be more secure. I did these as I did not want to pay for the size I wanted. Which can be very expensive. The only difference I would do is solder the connection as that would have the connections welded together just incase of shipping or anything customers would do that can cause the plastic clips to disconnect. I have not had this happen but I can see if I were to sell these that could be a issue that would potentially pop up. Soldering is not difficult, just takes some practice, but that would make these a more reliable product to offer. The ones I used for events were on maybe 3 hours with supervision. And nothing went wrong and they still work, I just did not want to pay the over $200 to have them built and figured this out for me. I do have a heart one that I built on my channel that my wife used as a valentines decoration and would leave on all day in our house (off at night) for over a week with no issue. Just some advice to think about before making to sell to potential customers. Thanks

@stepha3353 Жыл бұрын

What did you do with the acrylic to avoid melting back? Usually with the heat of the saw welds plexi or acrylic back together after cutting ? Do you sand edges ? Whats best advise to get smooth finish ?

@MakerDecor Жыл бұрын

Hi, yes sometimes the blade will do that. I use general purpose blades and plexiglass will dull those blades quick. So if you have a dull blade or it was cutting good and then it started to melt back together. The most likely culprit in my experience is just a dull blade? So its not getting a clean cut. A new blade and getting your timing right, not too slow and not too fast will help reduce the chance of it melting back together. Yes I do lightly sand the edges with a sanding sponge. Not a lot but enough to take off any plastic strings that hung on. Best advice for a smooth cut is a brand new blade. I have been working on putting a video together covering the topic of cutting plexiglass. Hopefully I get a chance to do it soon. Hope this helps.

@aurorajensen4455 Жыл бұрын

What was the font that you used for this? It looks so amazing!

@jamiecraftedthat2366 Жыл бұрын

Looks like "Madina Clean"

@jennifercorey336 2 жыл бұрын

Hi there, I just subscribed! This is awesome, how much to you charge to add this to a backdrop?

@MakerDecor 2 жыл бұрын

Hi thanks for subscribing. Pricing is all over the place. The first thing I would suggest is look at your market in your area. Ask for quotes and see what the base is and compare your product to theirs. What one area charges vs another can vary a lot. Also look what the size you have, would cost somebody to buy new and go from there. I myself usually try to get 1/3 on rentals at least but that varies. So if I know a sign would cost $150, the least I would rent it would be $50. So I would just have to rent it 3 times to get my money back and rest is profit. For some that is too cheap and others to expensive. You have to find what will work for your business to be profitable. But a lot of the time people create packages with backdrops, balloons, etc. and put it into the package. Just make sure you charge for your sign always. One thing to consider and that can get tough is what the sign says. If it is a generic sign you know will rent over multiple times such as "Oh Baby" etc. Versus if someone wants a custom sign that you know wont rent out as much, you are better off charging full price for the sign or asking them to purchase it. I have made signs that I thought would rent out and really did not do so well, so just really took a loss on those items.

@jennifercorey336 2 жыл бұрын

@@MakerDecor Thank you so much for such a detailed response!

@kaileysmith4025 10 ай бұрын

What wire do you order

@Alberto-tk7uv Жыл бұрын

quick question, where did you get the printed paper letter outline? I like how it was cut into 4 pieces

@MakerDecor Жыл бұрын

Hi, thanks for watching. I made it and sell some on my Etsy store. www.etsy.com/shop/MakerDecor

@Tadeodecor Жыл бұрын

Nice work!!! How do you hang it in the backdrop?

@MakerDecor Жыл бұрын

Hi, I drill holes through the plexi glass and use fishing string to tie it up. Thanks for watching!

@Foxy0619 Жыл бұрын

What kind of bit are you using to drill the holes in the plexiglass? I have a glowforge (still in the box) and am making a wedding sign for a friend. This method seems it will be easier, but I don’t want to crack my plexiglass. Also, I got some Ryobi tools for Christmas, don’t have that fancy tool you used to cut the outline. What kind of hand tool would you suggest using?

@MakerDecor Жыл бұрын

Hi, thanks for watching. But I would definitely take advantage of that glowforge. I'm jealous, lol. Hoping to get a laser cutter soon. I have made a couple of signs and have only cracked it twice I believe from the drilling. Both were still usable and just slight cracks and just takes some slight practice. Both times it cracked were my fault in stopping the drill too soon before drilling completely through. I just used a generic bit You do not need a scroll saw to cut the outline. A simple jigsaw with a plexi glass cutting blade will do it as well. But you do need thick plexi glass as the thinner will crack from the vibrations. The one I used was from Home Depot and I believe .220 thickness. Not the thin one. Hope this helps and good luck with your sign and your laser!! excited for you!

@Foxy0619 Жыл бұрын

@@MakerDecor thank you so much for your help! Love and appreciate that your videos are to help others learn as well. There aren't too many like you on social media!

@rafaelrios9130 Жыл бұрын

Where did you print the letter templates?

@paintingwithtastefromcanva7165 3 ай бұрын

Is this water proof so i can use outside?

@user-td2ny7dt9v Жыл бұрын

could you post here the exact items needed to make this if I order on amazon?

@christysorensen2914 Жыл бұрын

So the white cord is the same as the red and black it is just covered with the white correct? I’m ordering some and didn’t know if I needed to order both?! Thank u so much. U have taught me so much!!!!

@MakerDecor Жыл бұрын

Hi, yes you are correct. The red and black wire are inside the white cord. Thank you and good luck!